Enable arm_global_timer for Zynq brakes boot

[daniel.lezcano@linaro.org (Daniel Lezcano)]

On 08/06/2013 03:18 PM, Michal Simek wrote:

[ ... ]

>>>>> Soren: Are you able to replicate this issue on QEMU?
>>>>> If yes, it should be the best if you can provide Qemu, kernel .config/
>>>>> rootfs and simple manual to Daniel how to reach that fault.
>>>>
>>>> I tried to download qemu for zynq but it fails:
>>>>
>>>> git clone git://git.xilinx.com/qemu-xarm.git
>>>> Cloning into 'qemu-xarm'...
>>>> fatal: The remote end hung up unexpectedly
>>>
>>> Not sure which site have you found but
>>> it should be just qemu.git
>>> https://github.com/Xilinx/qemu
>>>
>>> or github clone.
>>
>> Ok, cool I was able to clone it.
>>
>>>> I am also looking for the option specified for the kernel:
>>>>
>>>> "The kernel needs to be built with this feature turned on (in
>>>> menuconfig, System Type->Xilinx Specific Features -> Device Tree At
>>>> Fixed Address)."
>>
>> Ok.
>>
>>> This also sound like a very ancient tree.
>>> This is the latest kernel tree - master-next is the latest devel branch.
>>> https://github.com/Xilinx/linux-xlnx
>>
>> Ok, cool. I have the right one.

Following the documentation, I was able to boot a kernel with qemu for
the linux-xlnx and qemu-xilinx.

But this kernel is outdated regarding the upstream one, so I tried to
boot a 3.11-rc4 kernel without success, I did the following:

I used the default config file from linux-xlnx for the upstream kernel.

I compiled the kernel with:

make -j 5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
UIMAGE_LOADADDR=0x8000 uImage

I generated the dtb with:

make -j 5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- dtbs

For qemu, I started qemu with:

./arm-softmmu/qemu-system-arm -M arm-generic-fdt -nographic -smp 2
-machine linux=on -serial mon:stdio -dtb zynq-zed.dtb -kernel
kernel/zImage -initrd filesystem/ramdisk.img

I tried with the dtb available for the upstream kernel:

zynq-zc706.dtb, zynq-zc702.dtb and zynq-zed.dtb

Did I miss something ?

Thanks
  -- Daniel



>>
>>> Or there should be an option to use the latest kernel from kernel.org.
>>> (I think Soren is using it)
>>>
>>> Zynq is the part of multiplatfrom kernel and cadence ttc is there,
>>> dts is also in the mainline kernel.
>>>
>>>> ps : apart that, well documented website !
>>>
>>> Can you send me the link to it?
>>
>> http://xilinx.wikidot.com/zynq-qemu
>> http://xilinx.wikidot.com/zynq-linux
> 
> I will find out information why it is still there.
> I think it was moved to the new location.
> 
>>
>>> This should be the main page for it.
>>> http://www.wiki.xilinx.com/


-- 
 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog