Enable arm_global_timer for Zynq brakes boot

[daniel.lezcano@linaro.org (Daniel Lezcano)]

On 08/12/2013 06:03 PM, S?ren Brinkmann wrote:
> On Fri, Aug 09, 2013 at 10:27:57AM -0700, Stephen Boyd wrote:
>> On 08/09, Daniel Lezcano wrote:
>>>
>>> yes, but at least the broadcast mechanism should send an IPI to cpu0 to
>>> wake it up, no ? As Stephen stated this kind of configuration should has
>>> never been tested before so the tick broadcast code is not handling this
>>> case properly IMHO.
>>>
>>
>> If you have a per-cpu tick device that isn't suffering from
>> FEAT_C3_STOP why wouldn't you use that for the tick versus a
>> per-cpu tick device that has FEAT_C3_STOP? It sounds like there
>> is a bug in the preference logic or you should boost the rating
>> of the arm global timer above the twd. Does this patch help? It
>> should make the arm global timer the tick device and whatever the
>> cadence timer you have into the broadcast device.
> 
> I finally got to test your patch. Unfortunately, it makes the system
> hang even earlier:

[ ... ]

Can you boot with maxcpus=1 and then give the result of timer_list ?


-- 
 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog