From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Daniel Mack <zonque@gmail.com>
Cc: netdev@vger.kernel.org, bcousson@baylibre.com, nsekhar@ti.com,
davem@davemloft.net, ujhelyi.m@gmail.com, mugunthanvnm@ti.com,
vaibhav.bedia@ti.com, d-gerlach@ti.com,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v4 1/5] net: ethernet: cpsw: switch to devres allocations
Date: Fri, 23 Aug 2013 22:10:54 +0400 [thread overview]
Message-ID: <5217A5AE.6090704@cogentembedded.com> (raw)
In-Reply-To: <1377267365-24057-2-git-send-email-zonque@gmail.com>
On 08/23/2013 06:16 PM, Daniel Mack wrote:
> This patch cleans up the allocation and error unwind paths, which
> allows us to carry less information in struct cpsw_priv and reduce the
> amount of jump labels in the probe functions.
> Signed-off-by: Daniel Mack <zonque@gmail.com>
> ---
> drivers/net/ethernet/ti/cpsw.c | 147 +++++++++++++----------------------------
> 1 file changed, 45 insertions(+), 102 deletions(-)
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index 79974e3..849af52 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
[...]
> @@ -1977,55 +1963,41 @@ static int cpsw_probe(struct platform_device *pdev)
> priv->slaves[0].ndev = ndev;
> priv->emac_port = 0;
>
> - priv->clk = clk_get(&pdev->dev, "fck");
> + priv->clk = devm_clk_get(&pdev->dev, "fck");
> if (IS_ERR(priv->clk)) {
> - dev_err(&pdev->dev, "fck is not found\n");
> + dev_err(priv->dev, "fck is not found\n");
> ret = -ENODEV;
> - goto clean_slave_ret;
> + goto clean_runtime_disable_ret;
> }
> priv->coal_intvl = 0;
> priv->bus_freq_mhz = clk_get_rate(priv->clk) / 1000000;
>
> - priv->cpsw_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!priv->cpsw_res) {
> + ss_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!ss_res) {
You don't need to check the result of platform_get_resource() if you call
devm_ioremap_resource() right afterwards -- it will check resource ptr for
NULL the first thing. :-)
> dev_err(priv->dev, "error getting i/o resource\n");
> ret = -ENOENT;
> - goto clean_clk_ret;
> + goto clean_runtime_disable_ret;
> }
> - if (!request_mem_region(priv->cpsw_res->start,
> - resource_size(priv->cpsw_res), ndev->name)) {
> - dev_err(priv->dev, "failed request i/o region\n");
> - ret = -ENXIO;
> - goto clean_clk_ret;
> - }
> - ss_regs = ioremap(priv->cpsw_res->start, resource_size(priv->cpsw_res));
> - if (!ss_regs) {
> + ss_regs = devm_ioremap_resource(&pdev->dev, ss_res);
> + if (IS_ERR(ss_regs)) {
> dev_err(priv->dev, "unable to map i/o region\n");
Don't need the error message anymore -- devm_ioremap_resource() will print
it. And you missed:
ret = PTR_ERR(ss_regs);
> - goto clean_cpsw_iores_ret;
> + goto clean_runtime_disable_ret;
> }
> priv->regs = ss_regs;
> priv->version = __raw_readl(&priv->regs->id_ver);
> priv->host_port = HOST_PORT_NUM;
>
> - priv->cpsw_wr_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> - if (!priv->cpsw_wr_res) {
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + if (!res) {
Same comment about resource check here...
> dev_err(priv->dev, "error getting i/o resource\n");
> ret = -ENOENT;
> - goto clean_iomap_ret;
> - }
> - if (!request_mem_region(priv->cpsw_wr_res->start,
> - resource_size(priv->cpsw_wr_res), ndev->name)) {
> - dev_err(priv->dev, "failed request i/o region\n");
> - ret = -ENXIO;
> - goto clean_iomap_ret;
> + goto clean_runtime_disable_ret;
> }
> - wr_regs = ioremap(priv->cpsw_wr_res->start,
> - resource_size(priv->cpsw_wr_res));
> - if (!wr_regs) {
> + priv->wr_regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->wr_regs)) {
> dev_err(priv->dev, "unable to map i/o region\n");
And same comments about the unneeded error message and missing 'ret'
assignment here...
> - goto clean_cpsw_wr_iores_ret;
> + goto clean_runtime_disable_ret;
> }
> - priv->wr_regs = wr_regs;
>
> memset(&dma_params, 0, sizeof(dma_params));
> memset(&ale_params, 0, sizeof(ale_params));
[...]
WBR, Sergei
WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/5] net: ethernet: cpsw: switch to devres allocations
Date: Fri, 23 Aug 2013 22:10:54 +0400 [thread overview]
Message-ID: <5217A5AE.6090704@cogentembedded.com> (raw)
In-Reply-To: <1377267365-24057-2-git-send-email-zonque@gmail.com>
On 08/23/2013 06:16 PM, Daniel Mack wrote:
> This patch cleans up the allocation and error unwind paths, which
> allows us to carry less information in struct cpsw_priv and reduce the
> amount of jump labels in the probe functions.
> Signed-off-by: Daniel Mack <zonque@gmail.com>
> ---
> drivers/net/ethernet/ti/cpsw.c | 147 +++++++++++++----------------------------
> 1 file changed, 45 insertions(+), 102 deletions(-)
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index 79974e3..849af52 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
[...]
> @@ -1977,55 +1963,41 @@ static int cpsw_probe(struct platform_device *pdev)
> priv->slaves[0].ndev = ndev;
> priv->emac_port = 0;
>
> - priv->clk = clk_get(&pdev->dev, "fck");
> + priv->clk = devm_clk_get(&pdev->dev, "fck");
> if (IS_ERR(priv->clk)) {
> - dev_err(&pdev->dev, "fck is not found\n");
> + dev_err(priv->dev, "fck is not found\n");
> ret = -ENODEV;
> - goto clean_slave_ret;
> + goto clean_runtime_disable_ret;
> }
> priv->coal_intvl = 0;
> priv->bus_freq_mhz = clk_get_rate(priv->clk) / 1000000;
>
> - priv->cpsw_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!priv->cpsw_res) {
> + ss_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!ss_res) {
You don't need to check the result of platform_get_resource() if you call
devm_ioremap_resource() right afterwards -- it will check resource ptr for
NULL the first thing. :-)
> dev_err(priv->dev, "error getting i/o resource\n");
> ret = -ENOENT;
> - goto clean_clk_ret;
> + goto clean_runtime_disable_ret;
> }
> - if (!request_mem_region(priv->cpsw_res->start,
> - resource_size(priv->cpsw_res), ndev->name)) {
> - dev_err(priv->dev, "failed request i/o region\n");
> - ret = -ENXIO;
> - goto clean_clk_ret;
> - }
> - ss_regs = ioremap(priv->cpsw_res->start, resource_size(priv->cpsw_res));
> - if (!ss_regs) {
> + ss_regs = devm_ioremap_resource(&pdev->dev, ss_res);
> + if (IS_ERR(ss_regs)) {
> dev_err(priv->dev, "unable to map i/o region\n");
Don't need the error message anymore -- devm_ioremap_resource() will print
it. And you missed:
ret = PTR_ERR(ss_regs);
> - goto clean_cpsw_iores_ret;
> + goto clean_runtime_disable_ret;
> }
> priv->regs = ss_regs;
> priv->version = __raw_readl(&priv->regs->id_ver);
> priv->host_port = HOST_PORT_NUM;
>
> - priv->cpsw_wr_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> - if (!priv->cpsw_wr_res) {
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + if (!res) {
Same comment about resource check here...
> dev_err(priv->dev, "error getting i/o resource\n");
> ret = -ENOENT;
> - goto clean_iomap_ret;
> - }
> - if (!request_mem_region(priv->cpsw_wr_res->start,
> - resource_size(priv->cpsw_wr_res), ndev->name)) {
> - dev_err(priv->dev, "failed request i/o region\n");
> - ret = -ENXIO;
> - goto clean_iomap_ret;
> + goto clean_runtime_disable_ret;
> }
> - wr_regs = ioremap(priv->cpsw_wr_res->start,
> - resource_size(priv->cpsw_wr_res));
> - if (!wr_regs) {
> + priv->wr_regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->wr_regs)) {
> dev_err(priv->dev, "unable to map i/o region\n");
And same comments about the unneeded error message and missing 'ret'
assignment here...
> - goto clean_cpsw_wr_iores_ret;
> + goto clean_runtime_disable_ret;
> }
> - priv->wr_regs = wr_regs;
>
> memset(&dma_params, 0, sizeof(dma_params));
> memset(&ale_params, 0, sizeof(ale_params));
[...]
WBR, Sergei
next prev parent reply other threads:[~2013-08-23 18:10 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-23 14:16 [PATCH v4 0/5] cpsw: support for control module register Daniel Mack
2013-08-23 14:16 ` Daniel Mack
2013-08-23 14:16 ` [PATCH v4 1/5] net: ethernet: cpsw: switch to devres allocations Daniel Mack
2013-08-23 14:16 ` Daniel Mack
2013-08-23 18:10 ` Sergei Shtylyov [this message]
2013-08-23 18:10 ` Sergei Shtylyov
2013-08-23 18:34 ` Daniel Mack
2013-08-23 18:34 ` Daniel Mack
2013-08-23 14:16 ` [PATCH v4 2/5] net: ethernet: cpsw: add optional third memory region for CONTROL module Daniel Mack
2013-08-23 14:16 ` Daniel Mack
2013-08-23 14:59 ` Sergei Shtylyov
2013-08-23 14:59 ` Sergei Shtylyov
2013-08-23 16:21 ` Daniel Mack
2013-08-23 16:21 ` Daniel Mack
2013-08-23 17:37 ` Sergei Shtylyov
2013-08-23 17:37 ` Sergei Shtylyov
2013-08-23 14:16 ` [PATCH v4 3/5] net: ethernet: cpsw: introduce ti,am3352-cpsw compatible string Daniel Mack
2013-08-23 14:16 ` [PATCH v4 3/5] net: ethernet: cpsw: introduce ti, am3352-cpsw " Daniel Mack
2013-08-23 14:23 ` [PATCH v4 3/5] net: ethernet: cpsw: introduce ti,am3352-cpsw " Santosh Shilimkar
2013-08-23 14:23 ` Santosh Shilimkar
2013-08-23 14:23 ` Santosh Shilimkar
2013-08-23 15:22 ` Benoit Cousson
2013-08-23 15:22 ` Benoit Cousson
2013-08-23 15:54 ` Santosh Shilimkar
2013-08-23 15:54 ` Santosh Shilimkar
2013-08-23 15:54 ` Santosh Shilimkar
2013-08-23 16:30 ` Daniel Mack
2013-08-23 16:30 ` Daniel Mack
2013-08-23 16:56 ` Santosh Shilimkar
2013-08-23 16:56 ` Santosh Shilimkar
2013-08-23 17:09 ` Sekhar Nori
2013-08-23 17:09 ` Sekhar Nori
2013-08-23 17:09 ` Sekhar Nori
2013-08-23 17:17 ` Daniel Mack
2013-08-23 17:17 ` Daniel Mack
2013-08-23 17:19 ` Santosh Shilimkar
2013-08-23 17:19 ` Santosh Shilimkar
2013-08-23 17:24 ` Daniel Mack
2013-08-23 17:24 ` Daniel Mack
2013-08-23 17:28 ` Santosh Shilimkar
2013-08-23 17:28 ` Santosh Shilimkar
2013-08-23 17:28 ` Santosh Shilimkar
2013-08-23 17:39 ` Sekhar Nori
2013-08-23 17:39 ` Sekhar Nori
2013-08-23 17:39 ` Sekhar Nori
2013-08-23 18:10 ` Santosh Shilimkar
2013-08-23 18:10 ` Santosh Shilimkar
2013-08-23 18:29 ` Mugunthan V N
2013-08-23 18:29 ` Mugunthan V N
2013-08-23 19:54 ` Santosh Shilimkar
2013-08-23 19:54 ` Santosh Shilimkar
2013-08-23 19:54 ` Santosh Shilimkar
2013-08-26 5:59 ` Mugunthan V N
2013-08-26 5:59 ` Mugunthan V N
2013-08-26 6:45 ` Sekhar Nori
2013-08-26 6:45 ` Sekhar Nori
2013-08-26 6:45 ` Sekhar Nori
2013-08-23 17:23 ` Mugunthan V N
2013-08-23 17:23 ` Mugunthan V N
2013-08-23 17:23 ` Mugunthan V N
2013-08-26 5:22 ` Gupta, Pekon
2013-08-26 5:22 ` Gupta, Pekon
2013-08-23 16:31 ` Sekhar Nori
2013-08-23 16:31 ` Sekhar Nori
2013-08-23 16:31 ` Sekhar Nori
2013-08-23 16:45 ` Mugunthan V N
2013-08-23 16:45 ` Mugunthan V N
2013-08-23 16:45 ` Mugunthan V N
2013-08-23 17:05 ` Santosh Shilimkar
2013-08-23 17:05 ` Santosh Shilimkar
2013-08-23 17:05 ` Santosh Shilimkar
2013-08-23 14:16 ` [PATCH v4 4/5] net: ethernet: cpsw: add support for hardware interface mode config Daniel Mack
2013-08-23 14:16 ` Daniel Mack
2013-08-23 16:50 ` Mugunthan V N
2013-08-23 16:50 ` Mugunthan V N
2013-08-23 16:50 ` Mugunthan V N
2013-08-23 14:16 ` [PATCH v4 5/5] ARM: dts: am33xx: adopt to cpsw changes Daniel Mack
2013-08-23 14:16 ` Daniel Mack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5217A5AE.6090704@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=bcousson@baylibre.com \
--cc=d-gerlach@ti.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=ujhelyi.m@gmail.com \
--cc=vaibhav.bedia@ti.com \
--cc=zonque@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.