All of lore.kernel.org
 help / color / mirror / Atom feed
From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 13/19] clk: at91: add PMC programmable clocks
Date: Tue, 8 Oct 2013 18:06:37 +0200	[thread overview]
Message-ID: <52542D8D.1030006@atmel.com> (raw)
In-Reply-To: <52542CA9.2000105@atmel.com>

On 08/10/2013 18:02, Nicolas Ferre :
> On 08/08/2013 09:12, Boris BREZILLON :
>> This patch adds new at91 programmable clocks implementation using common clk
>> framework.
>> A programmable clock is a clock which can be exported on a given pin to clock
>> external devices.
>> Each programmable clock is given an id (from 0 to 8).
>> The number of available programmable clocks depends on the SoC you're using.
>> Programmable clock driver only implements the clock setting (clock rate and
>> parent setting). It must be chained to a system clock in order to
>> enable/disable the generated clock.
>> The PCKX pins used to output the clock signals must be assigned to the
>> appropriate peripheral (see atmel's datasheets).
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>> ---
>>    drivers/clk/at91/Makefile           |    2 +
>>    drivers/clk/at91/clk-programmable.c |  419 +++++++++++++++++++++++++++++++++++
>>    drivers/clk/at91/pmc.c              |   15 ++
>>    drivers/clk/at91/pmc.h              |    9 +
>>    4 files changed, 445 insertions(+)
>>    create mode 100644 drivers/clk/at91/clk-programmable.c
>>
>> diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
>> index 04deba3..3873b62 100644
>> --- a/drivers/clk/at91/Makefile
>> +++ b/drivers/clk/at91/Makefile
>> @@ -5,3 +5,5 @@
>>    obj-y += pmc.o
>>    obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
>>    obj-y += clk-system.o clk-peripheral.o
>> +
>> +obj-$(CONFIG_AT91_PROGRAMMABLE_CLOCKS)	+= clk-programmable.o
>> diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c
>> new file mode 100644
>> index 0000000..f40de6a
>> --- /dev/null
>> +++ b/drivers/clk/at91/clk-programmable.c
>> @@ -0,0 +1,419 @@
>> +/*
>> + * drivers/clk/at91/clk-programmable.c
>> + *
>> + *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/clk/at91_pmc.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/io.h>
>> +#include <linux/wait.h>
>> +#include <linux/sched.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irq.h>
>> +
>> +#include "pmc.h"
>> +
>> +#define PROG_SOURCE_MAX		5
>> +#define PROG_MAX		8
>> +
>> +struct clk_programmable_layout {
>> +	u8 pres_shift;
>> +	u8 css_mask;
>> +	u8 have_slck_mck;
>> +};
>> +
>> +#define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw)
>> +struct clk_programmable {
>> +	struct clk_hw hw;
>> +	struct at91_pmc *pmc;
>> +	unsigned int irq;
>> +	wait_queue_head_t wait;
>> +	u8 id;
>> +	u8 css;
>> +	u8 pres;
>> +	u8 slckmck;
>> +	const struct clk_programmable_layout *layout;
>> +};
>> +
>> +static irqreturn_t clk_programmable_irq_handler(int irq, void *dev_id)
>> +{
>> +	struct clk_programmable *prog = (struct clk_programmable *)dev_id;
>> +
>> +	wake_up(&prog->wait);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static int clk_programmable_prepare(struct clk_hw *hw)
>> +{
>> +	u32 tmp;
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +
>> +	tmp = prog->css | (prog->pres << layout->pres_shift);
>> +	if (layout->have_slck_mck && prog->slckmck)
>> +		tmp |= 1 << 8;
>
> ;-) => define constants
>
>> +
>> +	pmc_write(pmc, AT91_PMC_PCKR(prog->id), tmp);
>> +
>> +	while (!(pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8))))
>
> - create a macro
> - is creating an event for each iteration of the while loop a good idea?

Oops, it is not "creating" it is "waiting" which is pretty different ;-)
So, do not consider this remark.

> - for the while() loop, I would like a timeout and a a non-active wait
> function...

Okay, this is also false: sorry for the noise.

>
>> +		wait_event(prog->wait,
>> +			   pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8)));
>> +
>> +	return 0;
>> +}
>> +
>> +static int clk_programmable_is_ready(struct clk_hw *hw)
>> +{
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +
>> +	return !!(pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8)));
>
> Ditto
>
>> +}
>> +
>> +static unsigned long clk_programmable_recalc_rate(struct clk_hw *hw,
>> +						  unsigned long parent_rate)
>> +{
>> +	u32 tmp;
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +
>> +	tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id));
>> +	prog->pres = (tmp >> layout->pres_shift) & 0x7;
>
> define constants
>
>> +
>> +	return parent_rate >> prog->pres;
>> +}
>> +
>> +static long clk_programmable_round_rate(struct clk_hw *hw, unsigned long rate,
>> +					unsigned long *parent_rate)
>> +{
>> +	unsigned long best_rate = *parent_rate;
>> +	unsigned long best_diff;
>> +	unsigned long new_diff;
>> +	unsigned long cur_rate;
>> +	int shift = shift;
>> +
>> +	if (rate > *parent_rate)
>> +		return *parent_rate;
>> +	else
>> +		best_diff = *parent_rate - rate;
>> +
>> +	if (!best_diff)
>> +		return best_rate;
>> +
>> +	for (shift = 1; shift < 7; shift++) {
>
> Ditto
>
>> +		cur_rate = *parent_rate >> shift;
>> +
>> +		if (cur_rate > rate)
>> +			new_diff = cur_rate - rate;
>> +		else
>> +			new_diff = rate - cur_rate;
>> +
>> +		if (!new_diff)
>> +			return cur_rate;
>> +
>> +		if (new_diff < best_diff) {
>> +			best_diff = new_diff;
>> +			best_rate = cur_rate;
>> +		}
>> +
>> +		if (rate > cur_rate)
>> +			break;
>> +
>> +	}
>> +
>> +	return best_rate;
>> +}
>> +
>> +static int clk_programmable_set_parent(struct clk_hw *hw, u8 index)
>> +{
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +	if (index > layout->css_mask) {
>> +		if (index == 4 && layout->have_slck_mck) {
>
> define "4"
>
>> +			prog->css = 0;
>> +			prog->slckmck = 1;
>> +			return 0;
>> +		} else
>
> Style: add the "{"
>
>> +			return -EINVAL;
>
> and "}"
>
>> +	}
>> +
>> +	prog->css = index;
>> +	return 0;
>> +}
>> +
>> +static u8 clk_programmable_get_parent(struct clk_hw *hw)
>> +{
>> +	u32 tmp;
>> +	u8 ret;
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +
>> +	tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id));
>> +	prog->css = tmp & layout->css_mask;
>> +	ret = prog->css;
>> +	if (layout->have_slck_mck) {
>> +		prog->slckmck = !!(tmp & (1 << 8));
>
> Ditto
>
>> +		if (prog->slckmck && !ret)
>> +			ret = 4;
>
> Ditto
>
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static int clk_programmable_set_rate(struct clk_hw *hw, unsigned long rate,
>> +				     unsigned long parent_rate)
>> +{
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	unsigned long best_rate = parent_rate;
>> +	unsigned long best_diff;
>> +	unsigned long new_diff;
>> +	unsigned long cur_rate;
>> +	int shift = 0;
>> +
>> +	if (rate > parent_rate)
>> +		return parent_rate;
>> +	else
>> +		best_diff = parent_rate - rate;
>> +
>> +	if (!best_diff) {
>> +		prog->pres = shift;
>> +		return 0;
>> +	}
>> +
>> +	for (shift = 1; shift < 7; shift++) {
>
> Ditto
>
>> +		cur_rate = parent_rate >> shift;
>> +
>> +		if (cur_rate > rate)
>> +			new_diff = cur_rate - rate;
>> +		else
>> +			new_diff = rate - cur_rate;
>> +
>> +		if (!new_diff)
>> +			break;
>> +
>> +		if (new_diff < best_diff) {
>> +			best_diff = new_diff;
>> +			best_rate = cur_rate;
>> +		}
>> +
>> +		if (rate > cur_rate)
>> +			break;
>> +
>> +	}
>> +
>> +	prog->pres = shift;
>> +	return 0;
>> +}
>> +
>> +static const struct clk_ops programmable_ops = {
>> +	.prepare = clk_programmable_prepare,
>> +	.is_prepared = clk_programmable_is_ready,
>> +	.recalc_rate = clk_programmable_recalc_rate,
>> +	.round_rate = clk_programmable_round_rate,
>> +	.get_parent = clk_programmable_get_parent,
>> +	.set_parent = clk_programmable_set_parent,
>> +	.set_rate = clk_programmable_set_rate,
>> +};
>> +
>> +static struct clk * __init
>> +at91_clk_register_programmable(struct at91_pmc *pmc, unsigned int irq,
>> +			       const char *name, const char **parent_names,
>> +			       u8 num_parents, u8 id,
>> +			       const struct clk_programmable_layout *layout)
>> +{
>> +	int ret;
>> +	struct clk_programmable *prog;
>> +	struct clk *clk = NULL;
>> +	struct clk_init_data init;
>> +	char irq_name[11];
>> +
>> +	id &= 7;
>
> Ditto
>
>> +
>> +	prog = kzalloc(sizeof(*prog), GFP_KERNEL);
>> +	if (!prog)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	init.name = name;
>> +	init.ops = &programmable_ops;
>> +	init.parent_names = parent_names;
>> +	init.num_parents = num_parents;
>> +	init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
>> +
>> +	prog->id = id;
>> +	prog->layout = layout;
>> +	prog->hw.init = &init;
>> +	prog->pmc = pmc;
>> +	prog->irq = irq;
>> +	init_waitqueue_head(&prog->wait);
>> +	irq_set_status_flags(prog->irq, IRQ_NOAUTOEN);
>> +	snprintf(irq_name, sizeof(irq_name), "clk-prog%d", id);
>> +	ret = request_irq(prog->irq, clk_programmable_irq_handler,
>> +			  IRQF_TRIGGER_HIGH, irq_name, prog);
>> +	if (ret)
>> +		return ERR_PTR(ret);
>> +
>> +	clk = clk_register(NULL, &prog->hw);
>> +
>
> ^^
>
>> +	if (IS_ERR(clk))
>> +		kfree(prog);
>> +
>> +	return clk;
>> +}
>> +
>> +static const struct clk_programmable_layout at91rm9200_programmable_layout = {
>> +	.pres_shift = 2,
>> +	.css_mask = 0x3,
>> +	.have_slck_mck = 0,
>> +};
>> +
>> +static const struct clk_programmable_layout at91sam9g45_programmable_layout = {
>> +	.pres_shift = 2,
>> +	.css_mask = 0x3,
>> +	.have_slck_mck = 1,
>> +};
>> +
>> +static const struct clk_programmable_layout at91sam9x5_programmable_layout = {
>> +	.pres_shift = 4,
>> +	.css_mask = 0x7,
>> +	.have_slck_mck = 0,
>> +};
>> +
>> +struct clk_prog_data {
>> +	struct clk **clks;
>> +	u8 *ids;
>> +	unsigned int clk_num;
>> +};
>> +
>> +static struct clk * __init
>> +of_clk_src_periph_get(struct of_phandle_args *clkspec, void *data)
>> +{
>> +	struct clk_prog_data *clk_data = data;
>> +	unsigned int id = clkspec->args[0];
>> +	int i;
>> +
>> +	if (id >= PROG_MAX)
>> +		goto err;
>> +
>> +	for (i = 0; i < clk_data->clk_num; i++) {
>> +		if (clk_data->ids[i] == id)
>> +			return clk_data->clks[i];
>> +	}
>> +
>> +err:
>> +	pr_err("%s: invalid clock id %d\n", __func__, id);
>> +	return ERR_PTR(-EINVAL);
>> +}
>> +
>> +static void __init
>> +of_at91_clk_prog_setup(struct device_node *np, struct at91_pmc *pmc,
>> +		       const struct clk_programmable_layout *layout)
>> +{
>> +	int num;
>> +	u32 id;
>> +	int i;
>> +	unsigned int irq;
>> +	struct clk *clk;
>> +	int num_parents;
>> +	u8 *ids;
>> +	struct clk **clks;
>> +	struct clk_prog_data *clktab;
>> +	const char *parent_names[PROG_SOURCE_MAX];
>> +	const char *name;
>> +	struct device_node *progclknp;
>> +
>> +	num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
>> +	if (num_parents <= 0 || num_parents > PROG_SOURCE_MAX)
>> +		return;
>> +
>> +	for (i = 0; i < num_parents; ++i) {
>> +		parent_names[i] = of_clk_get_parent_name(np, i);
>> +		if (!parent_names[i])
>> +			return;
>> +	}
>> +
>> +	num = of_get_child_count(np);
>> +	if (!num || num > PROG_MAX)
>> +		return;
>> +
>> +	clktab = kzalloc(sizeof(*clktab), GFP_KERNEL);
>> +	if (!clktab)
>> +		return;
>> +
>> +	ids = kzalloc(num * sizeof(*ids), GFP_KERNEL);
>> +	if (!ids)
>> +		goto out_free_clktab;
>> +
>> +	clks = kzalloc(num * sizeof(*clks), GFP_KERNEL);
>> +	if (!clks)
>> +		goto out_free_ids;
>> +
>> +	i = 0;
>> +	for_each_child_of_node(np, progclknp) {
>> +		name = progclknp->name;
>> +
>> +		if (of_property_read_u32(progclknp, "atmel,clk-id", &id))
>> +			goto out_free_clks;
>> +		if (id >= PROG_MAX)
>> +			goto out_free_clks;
>> +
>> +		irq = irq_of_parse_and_map(np, 0);
>> +		if (!irq)
>> +			goto out_free_clks;
>> +
>> +		clk = at91_clk_register_programmable(pmc, irq, name,
>> +						     parent_names, num_parents,
>> +						     id, layout);
>> +		if (IS_ERR(clk))
>> +			goto out_free_clks;
>> +
>> +		clks[i] = clk;
>> +		ids[i++] = id;
>> +	}
>> +
>> +	clktab->clk_num = num;
>> +	clktab->clks = clks;
>> +	clktab->ids = ids;
>> +	of_clk_add_provider(np, of_clk_src_periph_get, clktab);
>> +	return;
>> +
>> +out_free_clks:
>> +	kfree(clks);
>> +out_free_ids:
>> +	kfree(ids);
>> +out_free_clktab:
>> +	kfree(clktab);
>> +}
>> +
>> +
>> +void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
>> +					 struct at91_pmc *pmc)
>> +{
>> +	of_at91_clk_prog_setup(np, pmc, &at91rm9200_programmable_layout);
>> +}
>> +
>> +void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
>> +					  struct at91_pmc *pmc)
>> +{
>> +	of_at91_clk_prog_setup(np, pmc, &at91sam9g45_programmable_layout);
>> +}
>> +
>> +void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
>> +					 struct at91_pmc *pmc)
>> +{
>> +	of_at91_clk_prog_setup(np, pmc, &at91sam9x5_programmable_layout);
>> +}
>> diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
>> index 1a56f1c..66a627d 100644
>> --- a/drivers/clk/at91/pmc.c
>> +++ b/drivers/clk/at91/pmc.c
>> @@ -265,6 +265,21 @@ static const struct of_device_id pmc_clk_ids[] __initdata = {
>>    		.compatible = "atmel,at91sam9x5-clk-peripheral",
>>    		.data = of_at91sam9x5_clk_periph_setup,
>>    	},
>> +	/* Programmable clocks */
>> +#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
>> +	{
>> +		.compatible = "atmel,at91rm9200-clk-programmable",
>> +		.data = of_at91rm9200_clk_prog_setup,
>> +	},
>> +	{
>> +		.compatible = "atmel,at91sam9g45-clk-programmable",
>> +		.data = of_at91sam9g45_clk_prog_setup,
>> +	},
>> +	{
>> +		.compatible = "atmel,at91sam9x5-clk-programmable",
>> +		.data = of_at91sam9x5_clk_prog_setup,
>> +	},
>> +#endif
>>    	{ /*sentinel*/ }
>>    };
>>
>> diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
>> index 08c30fb..5f20dc1 100644
>> --- a/drivers/clk/at91/pmc.h
>> +++ b/drivers/clk/at91/pmc.h
>> @@ -82,4 +82,13 @@ extern void __init of_at91rm9200_clk_periph_setup(struct device_node *np,
>>    extern void __init of_at91sam9x5_clk_periph_setup(struct device_node *np,
>>    						  struct at91_pmc *pmc);
>>
>> +#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
>> +extern void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
>> +						struct at91_pmc *pmc);
>> +extern void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
>> +						 struct at91_pmc *pmc);
>> +extern void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
>> +						struct at91_pmc *pmc);
>> +#endif
>> +
>>    #endif /* __PMC_H_ */
>>
>
>


-- 
Nicolas Ferre

WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: Nicolas Ferre
	<nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
	Boris BREZILLON
	<b.brezillon-ZNYIgs0QAGpBDgjK7y7TUQ@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
	Rob Landley <rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org>,
	Andrew Victor <linux-PelNFVqkFnVyf+4FbqDuWQ@public.gmane.org>,
	Jean-Christophe Plagniol-Villard
	<plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>,
	Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
	Mike Turquette
	<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>,
	Greg Kroah-Hartman
	<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
	Ludovic Desroches
	<ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
	Josh Wu <josh.wu-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>,
	Richard Genoud
	<richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v3 13/19] clk: at91: add PMC programmable clocks
Date: Tue, 8 Oct 2013 18:06:37 +0200	[thread overview]
Message-ID: <52542D8D.1030006@atmel.com> (raw)
In-Reply-To: <52542CA9.2000105-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

On 08/10/2013 18:02, Nicolas Ferre :
> On 08/08/2013 09:12, Boris BREZILLON :
>> This patch adds new at91 programmable clocks implementation using common clk
>> framework.
>> A programmable clock is a clock which can be exported on a given pin to clock
>> external devices.
>> Each programmable clock is given an id (from 0 to 8).
>> The number of available programmable clocks depends on the SoC you're using.
>> Programmable clock driver only implements the clock setting (clock rate and
>> parent setting). It must be chained to a system clock in order to
>> enable/disable the generated clock.
>> The PCKX pins used to output the clock signals must be assigned to the
>> appropriate peripheral (see atmel's datasheets).
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon-ZNYIgs0QAGpBDgjK7y7TUQ@public.gmane.org>
>> ---
>>    drivers/clk/at91/Makefile           |    2 +
>>    drivers/clk/at91/clk-programmable.c |  419 +++++++++++++++++++++++++++++++++++
>>    drivers/clk/at91/pmc.c              |   15 ++
>>    drivers/clk/at91/pmc.h              |    9 +
>>    4 files changed, 445 insertions(+)
>>    create mode 100644 drivers/clk/at91/clk-programmable.c
>>
>> diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
>> index 04deba3..3873b62 100644
>> --- a/drivers/clk/at91/Makefile
>> +++ b/drivers/clk/at91/Makefile
>> @@ -5,3 +5,5 @@
>>    obj-y += pmc.o
>>    obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
>>    obj-y += clk-system.o clk-peripheral.o
>> +
>> +obj-$(CONFIG_AT91_PROGRAMMABLE_CLOCKS)	+= clk-programmable.o
>> diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c
>> new file mode 100644
>> index 0000000..f40de6a
>> --- /dev/null
>> +++ b/drivers/clk/at91/clk-programmable.c
>> @@ -0,0 +1,419 @@
>> +/*
>> + * drivers/clk/at91/clk-programmable.c
>> + *
>> + *  Copyright (C) 2013 Boris BREZILLON <b.brezillon-ZNYIgs0QAGpBDgjK7y7TUQ@public.gmane.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/clk/at91_pmc.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/io.h>
>> +#include <linux/wait.h>
>> +#include <linux/sched.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irq.h>
>> +
>> +#include "pmc.h"
>> +
>> +#define PROG_SOURCE_MAX		5
>> +#define PROG_MAX		8
>> +
>> +struct clk_programmable_layout {
>> +	u8 pres_shift;
>> +	u8 css_mask;
>> +	u8 have_slck_mck;
>> +};
>> +
>> +#define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw)
>> +struct clk_programmable {
>> +	struct clk_hw hw;
>> +	struct at91_pmc *pmc;
>> +	unsigned int irq;
>> +	wait_queue_head_t wait;
>> +	u8 id;
>> +	u8 css;
>> +	u8 pres;
>> +	u8 slckmck;
>> +	const struct clk_programmable_layout *layout;
>> +};
>> +
>> +static irqreturn_t clk_programmable_irq_handler(int irq, void *dev_id)
>> +{
>> +	struct clk_programmable *prog = (struct clk_programmable *)dev_id;
>> +
>> +	wake_up(&prog->wait);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static int clk_programmable_prepare(struct clk_hw *hw)
>> +{
>> +	u32 tmp;
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +
>> +	tmp = prog->css | (prog->pres << layout->pres_shift);
>> +	if (layout->have_slck_mck && prog->slckmck)
>> +		tmp |= 1 << 8;
>
> ;-) => define constants
>
>> +
>> +	pmc_write(pmc, AT91_PMC_PCKR(prog->id), tmp);
>> +
>> +	while (!(pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8))))
>
> - create a macro
> - is creating an event for each iteration of the while loop a good idea?

Oops, it is not "creating" it is "waiting" which is pretty different ;-)
So, do not consider this remark.

> - for the while() loop, I would like a timeout and a a non-active wait
> function...

Okay, this is also false: sorry for the noise.

>
>> +		wait_event(prog->wait,
>> +			   pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8)));
>> +
>> +	return 0;
>> +}
>> +
>> +static int clk_programmable_is_ready(struct clk_hw *hw)
>> +{
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +
>> +	return !!(pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8)));
>
> Ditto
>
>> +}
>> +
>> +static unsigned long clk_programmable_recalc_rate(struct clk_hw *hw,
>> +						  unsigned long parent_rate)
>> +{
>> +	u32 tmp;
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +
>> +	tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id));
>> +	prog->pres = (tmp >> layout->pres_shift) & 0x7;
>
> define constants
>
>> +
>> +	return parent_rate >> prog->pres;
>> +}
>> +
>> +static long clk_programmable_round_rate(struct clk_hw *hw, unsigned long rate,
>> +					unsigned long *parent_rate)
>> +{
>> +	unsigned long best_rate = *parent_rate;
>> +	unsigned long best_diff;
>> +	unsigned long new_diff;
>> +	unsigned long cur_rate;
>> +	int shift = shift;
>> +
>> +	if (rate > *parent_rate)
>> +		return *parent_rate;
>> +	else
>> +		best_diff = *parent_rate - rate;
>> +
>> +	if (!best_diff)
>> +		return best_rate;
>> +
>> +	for (shift = 1; shift < 7; shift++) {
>
> Ditto
>
>> +		cur_rate = *parent_rate >> shift;
>> +
>> +		if (cur_rate > rate)
>> +			new_diff = cur_rate - rate;
>> +		else
>> +			new_diff = rate - cur_rate;
>> +
>> +		if (!new_diff)
>> +			return cur_rate;
>> +
>> +		if (new_diff < best_diff) {
>> +			best_diff = new_diff;
>> +			best_rate = cur_rate;
>> +		}
>> +
>> +		if (rate > cur_rate)
>> +			break;
>> +
>> +	}
>> +
>> +	return best_rate;
>> +}
>> +
>> +static int clk_programmable_set_parent(struct clk_hw *hw, u8 index)
>> +{
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +	if (index > layout->css_mask) {
>> +		if (index == 4 && layout->have_slck_mck) {
>
> define "4"
>
>> +			prog->css = 0;
>> +			prog->slckmck = 1;
>> +			return 0;
>> +		} else
>
> Style: add the "{"
>
>> +			return -EINVAL;
>
> and "}"
>
>> +	}
>> +
>> +	prog->css = index;
>> +	return 0;
>> +}
>> +
>> +static u8 clk_programmable_get_parent(struct clk_hw *hw)
>> +{
>> +	u32 tmp;
>> +	u8 ret;
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +
>> +	tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id));
>> +	prog->css = tmp & layout->css_mask;
>> +	ret = prog->css;
>> +	if (layout->have_slck_mck) {
>> +		prog->slckmck = !!(tmp & (1 << 8));
>
> Ditto
>
>> +		if (prog->slckmck && !ret)
>> +			ret = 4;
>
> Ditto
>
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static int clk_programmable_set_rate(struct clk_hw *hw, unsigned long rate,
>> +				     unsigned long parent_rate)
>> +{
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	unsigned long best_rate = parent_rate;
>> +	unsigned long best_diff;
>> +	unsigned long new_diff;
>> +	unsigned long cur_rate;
>> +	int shift = 0;
>> +
>> +	if (rate > parent_rate)
>> +		return parent_rate;
>> +	else
>> +		best_diff = parent_rate - rate;
>> +
>> +	if (!best_diff) {
>> +		prog->pres = shift;
>> +		return 0;
>> +	}
>> +
>> +	for (shift = 1; shift < 7; shift++) {
>
> Ditto
>
>> +		cur_rate = parent_rate >> shift;
>> +
>> +		if (cur_rate > rate)
>> +			new_diff = cur_rate - rate;
>> +		else
>> +			new_diff = rate - cur_rate;
>> +
>> +		if (!new_diff)
>> +			break;
>> +
>> +		if (new_diff < best_diff) {
>> +			best_diff = new_diff;
>> +			best_rate = cur_rate;
>> +		}
>> +
>> +		if (rate > cur_rate)
>> +			break;
>> +
>> +	}
>> +
>> +	prog->pres = shift;
>> +	return 0;
>> +}
>> +
>> +static const struct clk_ops programmable_ops = {
>> +	.prepare = clk_programmable_prepare,
>> +	.is_prepared = clk_programmable_is_ready,
>> +	.recalc_rate = clk_programmable_recalc_rate,
>> +	.round_rate = clk_programmable_round_rate,
>> +	.get_parent = clk_programmable_get_parent,
>> +	.set_parent = clk_programmable_set_parent,
>> +	.set_rate = clk_programmable_set_rate,
>> +};
>> +
>> +static struct clk * __init
>> +at91_clk_register_programmable(struct at91_pmc *pmc, unsigned int irq,
>> +			       const char *name, const char **parent_names,
>> +			       u8 num_parents, u8 id,
>> +			       const struct clk_programmable_layout *layout)
>> +{
>> +	int ret;
>> +	struct clk_programmable *prog;
>> +	struct clk *clk = NULL;
>> +	struct clk_init_data init;
>> +	char irq_name[11];
>> +
>> +	id &= 7;
>
> Ditto
>
>> +
>> +	prog = kzalloc(sizeof(*prog), GFP_KERNEL);
>> +	if (!prog)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	init.name = name;
>> +	init.ops = &programmable_ops;
>> +	init.parent_names = parent_names;
>> +	init.num_parents = num_parents;
>> +	init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
>> +
>> +	prog->id = id;
>> +	prog->layout = layout;
>> +	prog->hw.init = &init;
>> +	prog->pmc = pmc;
>> +	prog->irq = irq;
>> +	init_waitqueue_head(&prog->wait);
>> +	irq_set_status_flags(prog->irq, IRQ_NOAUTOEN);
>> +	snprintf(irq_name, sizeof(irq_name), "clk-prog%d", id);
>> +	ret = request_irq(prog->irq, clk_programmable_irq_handler,
>> +			  IRQF_TRIGGER_HIGH, irq_name, prog);
>> +	if (ret)
>> +		return ERR_PTR(ret);
>> +
>> +	clk = clk_register(NULL, &prog->hw);
>> +
>
> ^^
>
>> +	if (IS_ERR(clk))
>> +		kfree(prog);
>> +
>> +	return clk;
>> +}
>> +
>> +static const struct clk_programmable_layout at91rm9200_programmable_layout = {
>> +	.pres_shift = 2,
>> +	.css_mask = 0x3,
>> +	.have_slck_mck = 0,
>> +};
>> +
>> +static const struct clk_programmable_layout at91sam9g45_programmable_layout = {
>> +	.pres_shift = 2,
>> +	.css_mask = 0x3,
>> +	.have_slck_mck = 1,
>> +};
>> +
>> +static const struct clk_programmable_layout at91sam9x5_programmable_layout = {
>> +	.pres_shift = 4,
>> +	.css_mask = 0x7,
>> +	.have_slck_mck = 0,
>> +};
>> +
>> +struct clk_prog_data {
>> +	struct clk **clks;
>> +	u8 *ids;
>> +	unsigned int clk_num;
>> +};
>> +
>> +static struct clk * __init
>> +of_clk_src_periph_get(struct of_phandle_args *clkspec, void *data)
>> +{
>> +	struct clk_prog_data *clk_data = data;
>> +	unsigned int id = clkspec->args[0];
>> +	int i;
>> +
>> +	if (id >= PROG_MAX)
>> +		goto err;
>> +
>> +	for (i = 0; i < clk_data->clk_num; i++) {
>> +		if (clk_data->ids[i] == id)
>> +			return clk_data->clks[i];
>> +	}
>> +
>> +err:
>> +	pr_err("%s: invalid clock id %d\n", __func__, id);
>> +	return ERR_PTR(-EINVAL);
>> +}
>> +
>> +static void __init
>> +of_at91_clk_prog_setup(struct device_node *np, struct at91_pmc *pmc,
>> +		       const struct clk_programmable_layout *layout)
>> +{
>> +	int num;
>> +	u32 id;
>> +	int i;
>> +	unsigned int irq;
>> +	struct clk *clk;
>> +	int num_parents;
>> +	u8 *ids;
>> +	struct clk **clks;
>> +	struct clk_prog_data *clktab;
>> +	const char *parent_names[PROG_SOURCE_MAX];
>> +	const char *name;
>> +	struct device_node *progclknp;
>> +
>> +	num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
>> +	if (num_parents <= 0 || num_parents > PROG_SOURCE_MAX)
>> +		return;
>> +
>> +	for (i = 0; i < num_parents; ++i) {
>> +		parent_names[i] = of_clk_get_parent_name(np, i);
>> +		if (!parent_names[i])
>> +			return;
>> +	}
>> +
>> +	num = of_get_child_count(np);
>> +	if (!num || num > PROG_MAX)
>> +		return;
>> +
>> +	clktab = kzalloc(sizeof(*clktab), GFP_KERNEL);
>> +	if (!clktab)
>> +		return;
>> +
>> +	ids = kzalloc(num * sizeof(*ids), GFP_KERNEL);
>> +	if (!ids)
>> +		goto out_free_clktab;
>> +
>> +	clks = kzalloc(num * sizeof(*clks), GFP_KERNEL);
>> +	if (!clks)
>> +		goto out_free_ids;
>> +
>> +	i = 0;
>> +	for_each_child_of_node(np, progclknp) {
>> +		name = progclknp->name;
>> +
>> +		if (of_property_read_u32(progclknp, "atmel,clk-id", &id))
>> +			goto out_free_clks;
>> +		if (id >= PROG_MAX)
>> +			goto out_free_clks;
>> +
>> +		irq = irq_of_parse_and_map(np, 0);
>> +		if (!irq)
>> +			goto out_free_clks;
>> +
>> +		clk = at91_clk_register_programmable(pmc, irq, name,
>> +						     parent_names, num_parents,
>> +						     id, layout);
>> +		if (IS_ERR(clk))
>> +			goto out_free_clks;
>> +
>> +		clks[i] = clk;
>> +		ids[i++] = id;
>> +	}
>> +
>> +	clktab->clk_num = num;
>> +	clktab->clks = clks;
>> +	clktab->ids = ids;
>> +	of_clk_add_provider(np, of_clk_src_periph_get, clktab);
>> +	return;
>> +
>> +out_free_clks:
>> +	kfree(clks);
>> +out_free_ids:
>> +	kfree(ids);
>> +out_free_clktab:
>> +	kfree(clktab);
>> +}
>> +
>> +
>> +void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
>> +					 struct at91_pmc *pmc)
>> +{
>> +	of_at91_clk_prog_setup(np, pmc, &at91rm9200_programmable_layout);
>> +}
>> +
>> +void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
>> +					  struct at91_pmc *pmc)
>> +{
>> +	of_at91_clk_prog_setup(np, pmc, &at91sam9g45_programmable_layout);
>> +}
>> +
>> +void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
>> +					 struct at91_pmc *pmc)
>> +{
>> +	of_at91_clk_prog_setup(np, pmc, &at91sam9x5_programmable_layout);
>> +}
>> diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
>> index 1a56f1c..66a627d 100644
>> --- a/drivers/clk/at91/pmc.c
>> +++ b/drivers/clk/at91/pmc.c
>> @@ -265,6 +265,21 @@ static const struct of_device_id pmc_clk_ids[] __initdata = {
>>    		.compatible = "atmel,at91sam9x5-clk-peripheral",
>>    		.data = of_at91sam9x5_clk_periph_setup,
>>    	},
>> +	/* Programmable clocks */
>> +#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
>> +	{
>> +		.compatible = "atmel,at91rm9200-clk-programmable",
>> +		.data = of_at91rm9200_clk_prog_setup,
>> +	},
>> +	{
>> +		.compatible = "atmel,at91sam9g45-clk-programmable",
>> +		.data = of_at91sam9g45_clk_prog_setup,
>> +	},
>> +	{
>> +		.compatible = "atmel,at91sam9x5-clk-programmable",
>> +		.data = of_at91sam9x5_clk_prog_setup,
>> +	},
>> +#endif
>>    	{ /*sentinel*/ }
>>    };
>>
>> diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
>> index 08c30fb..5f20dc1 100644
>> --- a/drivers/clk/at91/pmc.h
>> +++ b/drivers/clk/at91/pmc.h
>> @@ -82,4 +82,13 @@ extern void __init of_at91rm9200_clk_periph_setup(struct device_node *np,
>>    extern void __init of_at91sam9x5_clk_periph_setup(struct device_node *np,
>>    						  struct at91_pmc *pmc);
>>
>> +#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
>> +extern void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
>> +						struct at91_pmc *pmc);
>> +extern void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
>> +						 struct at91_pmc *pmc);
>> +extern void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
>> +						struct at91_pmc *pmc);
>> +#endif
>> +
>>    #endif /* __PMC_H_ */
>>
>
>


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
	Boris BREZILLON <b.brezillon@overkiz.com>,
	Grant Likely <grant.likely@linaro.org>,
	"Rob Herring" <rob.herring@calxeda.com>,
	Rob Landley <rob@landley.net>,
	"Andrew Victor" <linux@maxim.org.za>,
	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
	Russell King <linux@arm.linux.org.uk>,
	"Mike Turquette" <mturquette@linaro.org>,
	Felipe Balbi <balbi@ti.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	Ludovic Desroches <ludovic.desroches@atmel.com>,
	Josh Wu <josh.wu@atmel.com>,
	Richard Genoud <richard.genoud@gmail.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 13/19] clk: at91: add PMC programmable clocks
Date: Tue, 8 Oct 2013 18:06:37 +0200	[thread overview]
Message-ID: <52542D8D.1030006@atmel.com> (raw)
In-Reply-To: <52542CA9.2000105@atmel.com>

On 08/10/2013 18:02, Nicolas Ferre :
> On 08/08/2013 09:12, Boris BREZILLON :
>> This patch adds new at91 programmable clocks implementation using common clk
>> framework.
>> A programmable clock is a clock which can be exported on a given pin to clock
>> external devices.
>> Each programmable clock is given an id (from 0 to 8).
>> The number of available programmable clocks depends on the SoC you're using.
>> Programmable clock driver only implements the clock setting (clock rate and
>> parent setting). It must be chained to a system clock in order to
>> enable/disable the generated clock.
>> The PCKX pins used to output the clock signals must be assigned to the
>> appropriate peripheral (see atmel's datasheets).
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>> ---
>>    drivers/clk/at91/Makefile           |    2 +
>>    drivers/clk/at91/clk-programmable.c |  419 +++++++++++++++++++++++++++++++++++
>>    drivers/clk/at91/pmc.c              |   15 ++
>>    drivers/clk/at91/pmc.h              |    9 +
>>    4 files changed, 445 insertions(+)
>>    create mode 100644 drivers/clk/at91/clk-programmable.c
>>
>> diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
>> index 04deba3..3873b62 100644
>> --- a/drivers/clk/at91/Makefile
>> +++ b/drivers/clk/at91/Makefile
>> @@ -5,3 +5,5 @@
>>    obj-y += pmc.o
>>    obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
>>    obj-y += clk-system.o clk-peripheral.o
>> +
>> +obj-$(CONFIG_AT91_PROGRAMMABLE_CLOCKS)	+= clk-programmable.o
>> diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c
>> new file mode 100644
>> index 0000000..f40de6a
>> --- /dev/null
>> +++ b/drivers/clk/at91/clk-programmable.c
>> @@ -0,0 +1,419 @@
>> +/*
>> + * drivers/clk/at91/clk-programmable.c
>> + *
>> + *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/clk/at91_pmc.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/io.h>
>> +#include <linux/wait.h>
>> +#include <linux/sched.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irq.h>
>> +
>> +#include "pmc.h"
>> +
>> +#define PROG_SOURCE_MAX		5
>> +#define PROG_MAX		8
>> +
>> +struct clk_programmable_layout {
>> +	u8 pres_shift;
>> +	u8 css_mask;
>> +	u8 have_slck_mck;
>> +};
>> +
>> +#define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw)
>> +struct clk_programmable {
>> +	struct clk_hw hw;
>> +	struct at91_pmc *pmc;
>> +	unsigned int irq;
>> +	wait_queue_head_t wait;
>> +	u8 id;
>> +	u8 css;
>> +	u8 pres;
>> +	u8 slckmck;
>> +	const struct clk_programmable_layout *layout;
>> +};
>> +
>> +static irqreturn_t clk_programmable_irq_handler(int irq, void *dev_id)
>> +{
>> +	struct clk_programmable *prog = (struct clk_programmable *)dev_id;
>> +
>> +	wake_up(&prog->wait);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static int clk_programmable_prepare(struct clk_hw *hw)
>> +{
>> +	u32 tmp;
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +
>> +	tmp = prog->css | (prog->pres << layout->pres_shift);
>> +	if (layout->have_slck_mck && prog->slckmck)
>> +		tmp |= 1 << 8;
>
> ;-) => define constants
>
>> +
>> +	pmc_write(pmc, AT91_PMC_PCKR(prog->id), tmp);
>> +
>> +	while (!(pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8))))
>
> - create a macro
> - is creating an event for each iteration of the while loop a good idea?

Oops, it is not "creating" it is "waiting" which is pretty different ;-)
So, do not consider this remark.

> - for the while() loop, I would like a timeout and a a non-active wait
> function...

Okay, this is also false: sorry for the noise.

>
>> +		wait_event(prog->wait,
>> +			   pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8)));
>> +
>> +	return 0;
>> +}
>> +
>> +static int clk_programmable_is_ready(struct clk_hw *hw)
>> +{
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +
>> +	return !!(pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8)));
>
> Ditto
>
>> +}
>> +
>> +static unsigned long clk_programmable_recalc_rate(struct clk_hw *hw,
>> +						  unsigned long parent_rate)
>> +{
>> +	u32 tmp;
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +
>> +	tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id));
>> +	prog->pres = (tmp >> layout->pres_shift) & 0x7;
>
> define constants
>
>> +
>> +	return parent_rate >> prog->pres;
>> +}
>> +
>> +static long clk_programmable_round_rate(struct clk_hw *hw, unsigned long rate,
>> +					unsigned long *parent_rate)
>> +{
>> +	unsigned long best_rate = *parent_rate;
>> +	unsigned long best_diff;
>> +	unsigned long new_diff;
>> +	unsigned long cur_rate;
>> +	int shift = shift;
>> +
>> +	if (rate > *parent_rate)
>> +		return *parent_rate;
>> +	else
>> +		best_diff = *parent_rate - rate;
>> +
>> +	if (!best_diff)
>> +		return best_rate;
>> +
>> +	for (shift = 1; shift < 7; shift++) {
>
> Ditto
>
>> +		cur_rate = *parent_rate >> shift;
>> +
>> +		if (cur_rate > rate)
>> +			new_diff = cur_rate - rate;
>> +		else
>> +			new_diff = rate - cur_rate;
>> +
>> +		if (!new_diff)
>> +			return cur_rate;
>> +
>> +		if (new_diff < best_diff) {
>> +			best_diff = new_diff;
>> +			best_rate = cur_rate;
>> +		}
>> +
>> +		if (rate > cur_rate)
>> +			break;
>> +
>> +	}
>> +
>> +	return best_rate;
>> +}
>> +
>> +static int clk_programmable_set_parent(struct clk_hw *hw, u8 index)
>> +{
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +	if (index > layout->css_mask) {
>> +		if (index == 4 && layout->have_slck_mck) {
>
> define "4"
>
>> +			prog->css = 0;
>> +			prog->slckmck = 1;
>> +			return 0;
>> +		} else
>
> Style: add the "{"
>
>> +			return -EINVAL;
>
> and "}"
>
>> +	}
>> +
>> +	prog->css = index;
>> +	return 0;
>> +}
>> +
>> +static u8 clk_programmable_get_parent(struct clk_hw *hw)
>> +{
>> +	u32 tmp;
>> +	u8 ret;
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	struct at91_pmc *pmc = prog->pmc;
>> +	const struct clk_programmable_layout *layout = prog->layout;
>> +
>> +	tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id));
>> +	prog->css = tmp & layout->css_mask;
>> +	ret = prog->css;
>> +	if (layout->have_slck_mck) {
>> +		prog->slckmck = !!(tmp & (1 << 8));
>
> Ditto
>
>> +		if (prog->slckmck && !ret)
>> +			ret = 4;
>
> Ditto
>
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static int clk_programmable_set_rate(struct clk_hw *hw, unsigned long rate,
>> +				     unsigned long parent_rate)
>> +{
>> +	struct clk_programmable *prog = to_clk_programmable(hw);
>> +	unsigned long best_rate = parent_rate;
>> +	unsigned long best_diff;
>> +	unsigned long new_diff;
>> +	unsigned long cur_rate;
>> +	int shift = 0;
>> +
>> +	if (rate > parent_rate)
>> +		return parent_rate;
>> +	else
>> +		best_diff = parent_rate - rate;
>> +
>> +	if (!best_diff) {
>> +		prog->pres = shift;
>> +		return 0;
>> +	}
>> +
>> +	for (shift = 1; shift < 7; shift++) {
>
> Ditto
>
>> +		cur_rate = parent_rate >> shift;
>> +
>> +		if (cur_rate > rate)
>> +			new_diff = cur_rate - rate;
>> +		else
>> +			new_diff = rate - cur_rate;
>> +
>> +		if (!new_diff)
>> +			break;
>> +
>> +		if (new_diff < best_diff) {
>> +			best_diff = new_diff;
>> +			best_rate = cur_rate;
>> +		}
>> +
>> +		if (rate > cur_rate)
>> +			break;
>> +
>> +	}
>> +
>> +	prog->pres = shift;
>> +	return 0;
>> +}
>> +
>> +static const struct clk_ops programmable_ops = {
>> +	.prepare = clk_programmable_prepare,
>> +	.is_prepared = clk_programmable_is_ready,
>> +	.recalc_rate = clk_programmable_recalc_rate,
>> +	.round_rate = clk_programmable_round_rate,
>> +	.get_parent = clk_programmable_get_parent,
>> +	.set_parent = clk_programmable_set_parent,
>> +	.set_rate = clk_programmable_set_rate,
>> +};
>> +
>> +static struct clk * __init
>> +at91_clk_register_programmable(struct at91_pmc *pmc, unsigned int irq,
>> +			       const char *name, const char **parent_names,
>> +			       u8 num_parents, u8 id,
>> +			       const struct clk_programmable_layout *layout)
>> +{
>> +	int ret;
>> +	struct clk_programmable *prog;
>> +	struct clk *clk = NULL;
>> +	struct clk_init_data init;
>> +	char irq_name[11];
>> +
>> +	id &= 7;
>
> Ditto
>
>> +
>> +	prog = kzalloc(sizeof(*prog), GFP_KERNEL);
>> +	if (!prog)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	init.name = name;
>> +	init.ops = &programmable_ops;
>> +	init.parent_names = parent_names;
>> +	init.num_parents = num_parents;
>> +	init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
>> +
>> +	prog->id = id;
>> +	prog->layout = layout;
>> +	prog->hw.init = &init;
>> +	prog->pmc = pmc;
>> +	prog->irq = irq;
>> +	init_waitqueue_head(&prog->wait);
>> +	irq_set_status_flags(prog->irq, IRQ_NOAUTOEN);
>> +	snprintf(irq_name, sizeof(irq_name), "clk-prog%d", id);
>> +	ret = request_irq(prog->irq, clk_programmable_irq_handler,
>> +			  IRQF_TRIGGER_HIGH, irq_name, prog);
>> +	if (ret)
>> +		return ERR_PTR(ret);
>> +
>> +	clk = clk_register(NULL, &prog->hw);
>> +
>
> ^^
>
>> +	if (IS_ERR(clk))
>> +		kfree(prog);
>> +
>> +	return clk;
>> +}
>> +
>> +static const struct clk_programmable_layout at91rm9200_programmable_layout = {
>> +	.pres_shift = 2,
>> +	.css_mask = 0x3,
>> +	.have_slck_mck = 0,
>> +};
>> +
>> +static const struct clk_programmable_layout at91sam9g45_programmable_layout = {
>> +	.pres_shift = 2,
>> +	.css_mask = 0x3,
>> +	.have_slck_mck = 1,
>> +};
>> +
>> +static const struct clk_programmable_layout at91sam9x5_programmable_layout = {
>> +	.pres_shift = 4,
>> +	.css_mask = 0x7,
>> +	.have_slck_mck = 0,
>> +};
>> +
>> +struct clk_prog_data {
>> +	struct clk **clks;
>> +	u8 *ids;
>> +	unsigned int clk_num;
>> +};
>> +
>> +static struct clk * __init
>> +of_clk_src_periph_get(struct of_phandle_args *clkspec, void *data)
>> +{
>> +	struct clk_prog_data *clk_data = data;
>> +	unsigned int id = clkspec->args[0];
>> +	int i;
>> +
>> +	if (id >= PROG_MAX)
>> +		goto err;
>> +
>> +	for (i = 0; i < clk_data->clk_num; i++) {
>> +		if (clk_data->ids[i] == id)
>> +			return clk_data->clks[i];
>> +	}
>> +
>> +err:
>> +	pr_err("%s: invalid clock id %d\n", __func__, id);
>> +	return ERR_PTR(-EINVAL);
>> +}
>> +
>> +static void __init
>> +of_at91_clk_prog_setup(struct device_node *np, struct at91_pmc *pmc,
>> +		       const struct clk_programmable_layout *layout)
>> +{
>> +	int num;
>> +	u32 id;
>> +	int i;
>> +	unsigned int irq;
>> +	struct clk *clk;
>> +	int num_parents;
>> +	u8 *ids;
>> +	struct clk **clks;
>> +	struct clk_prog_data *clktab;
>> +	const char *parent_names[PROG_SOURCE_MAX];
>> +	const char *name;
>> +	struct device_node *progclknp;
>> +
>> +	num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
>> +	if (num_parents <= 0 || num_parents > PROG_SOURCE_MAX)
>> +		return;
>> +
>> +	for (i = 0; i < num_parents; ++i) {
>> +		parent_names[i] = of_clk_get_parent_name(np, i);
>> +		if (!parent_names[i])
>> +			return;
>> +	}
>> +
>> +	num = of_get_child_count(np);
>> +	if (!num || num > PROG_MAX)
>> +		return;
>> +
>> +	clktab = kzalloc(sizeof(*clktab), GFP_KERNEL);
>> +	if (!clktab)
>> +		return;
>> +
>> +	ids = kzalloc(num * sizeof(*ids), GFP_KERNEL);
>> +	if (!ids)
>> +		goto out_free_clktab;
>> +
>> +	clks = kzalloc(num * sizeof(*clks), GFP_KERNEL);
>> +	if (!clks)
>> +		goto out_free_ids;
>> +
>> +	i = 0;
>> +	for_each_child_of_node(np, progclknp) {
>> +		name = progclknp->name;
>> +
>> +		if (of_property_read_u32(progclknp, "atmel,clk-id", &id))
>> +			goto out_free_clks;
>> +		if (id >= PROG_MAX)
>> +			goto out_free_clks;
>> +
>> +		irq = irq_of_parse_and_map(np, 0);
>> +		if (!irq)
>> +			goto out_free_clks;
>> +
>> +		clk = at91_clk_register_programmable(pmc, irq, name,
>> +						     parent_names, num_parents,
>> +						     id, layout);
>> +		if (IS_ERR(clk))
>> +			goto out_free_clks;
>> +
>> +		clks[i] = clk;
>> +		ids[i++] = id;
>> +	}
>> +
>> +	clktab->clk_num = num;
>> +	clktab->clks = clks;
>> +	clktab->ids = ids;
>> +	of_clk_add_provider(np, of_clk_src_periph_get, clktab);
>> +	return;
>> +
>> +out_free_clks:
>> +	kfree(clks);
>> +out_free_ids:
>> +	kfree(ids);
>> +out_free_clktab:
>> +	kfree(clktab);
>> +}
>> +
>> +
>> +void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
>> +					 struct at91_pmc *pmc)
>> +{
>> +	of_at91_clk_prog_setup(np, pmc, &at91rm9200_programmable_layout);
>> +}
>> +
>> +void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
>> +					  struct at91_pmc *pmc)
>> +{
>> +	of_at91_clk_prog_setup(np, pmc, &at91sam9g45_programmable_layout);
>> +}
>> +
>> +void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
>> +					 struct at91_pmc *pmc)
>> +{
>> +	of_at91_clk_prog_setup(np, pmc, &at91sam9x5_programmable_layout);
>> +}
>> diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
>> index 1a56f1c..66a627d 100644
>> --- a/drivers/clk/at91/pmc.c
>> +++ b/drivers/clk/at91/pmc.c
>> @@ -265,6 +265,21 @@ static const struct of_device_id pmc_clk_ids[] __initdata = {
>>    		.compatible = "atmel,at91sam9x5-clk-peripheral",
>>    		.data = of_at91sam9x5_clk_periph_setup,
>>    	},
>> +	/* Programmable clocks */
>> +#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
>> +	{
>> +		.compatible = "atmel,at91rm9200-clk-programmable",
>> +		.data = of_at91rm9200_clk_prog_setup,
>> +	},
>> +	{
>> +		.compatible = "atmel,at91sam9g45-clk-programmable",
>> +		.data = of_at91sam9g45_clk_prog_setup,
>> +	},
>> +	{
>> +		.compatible = "atmel,at91sam9x5-clk-programmable",
>> +		.data = of_at91sam9x5_clk_prog_setup,
>> +	},
>> +#endif
>>    	{ /*sentinel*/ }
>>    };
>>
>> diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
>> index 08c30fb..5f20dc1 100644
>> --- a/drivers/clk/at91/pmc.h
>> +++ b/drivers/clk/at91/pmc.h
>> @@ -82,4 +82,13 @@ extern void __init of_at91rm9200_clk_periph_setup(struct device_node *np,
>>    extern void __init of_at91sam9x5_clk_periph_setup(struct device_node *np,
>>    						  struct at91_pmc *pmc);
>>
>> +#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
>> +extern void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
>> +						struct at91_pmc *pmc);
>> +extern void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
>> +						 struct at91_pmc *pmc);
>> +extern void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
>> +						struct at91_pmc *pmc);
>> +#endif
>> +
>>    #endif /* __PMC_H_ */
>>
>
>


-- 
Nicolas Ferre

  reply	other threads:[~2013-10-08 16:06 UTC|newest]

Thread overview: 136+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-08  4:53 [PATCH v3 00/19] ARM: at91: move to common clk framework Boris BREZILLON
2013-08-08  4:53 ` Boris BREZILLON
2013-08-08  4:59 ` [PATCH v3 01/19] ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h Boris BREZILLON
2013-08-08  4:59   ` Boris BREZILLON
2013-08-08  5:01 ` [PATCH v3 03/19] clk: at91: add PMC base support Boris BREZILLON
2013-08-08  5:01   ` Boris BREZILLON
2013-10-07 15:07   ` Nicolas Ferre
2013-10-07 15:07     ` Nicolas Ferre
2013-10-07 15:07     ` Nicolas Ferre
2013-10-07 15:57     ` boris brezillon
2013-10-07 15:57       ` boris brezillon
2013-08-08  5:02 ` [PATCH v3 02/19] ARM: at91: add Kconfig options for common clk support Boris BREZILLON
2013-08-08  5:02   ` Boris BREZILLON
2013-10-07 15:12   ` Nicolas Ferre
2013-10-07 15:12     ` Nicolas Ferre
2013-10-07 15:12     ` Nicolas Ferre
2013-10-07 16:05     ` boris brezillon
2013-10-07 16:05       ` boris brezillon
2013-10-09  9:56     ` boris brezillon
2013-10-09  9:56       ` boris brezillon
2013-10-09 10:05       ` Nicolas Ferre
2013-10-09 10:05         ` Nicolas Ferre
2013-10-09 10:05         ` Nicolas Ferre
2013-08-08  5:04 ` [PATCH v3 04/19] clk: at91: add PMC macro file for dt definitions Boris BREZILLON
2013-08-08  5:04   ` Boris BREZILLON
2013-10-07 15:17   ` Nicolas Ferre
2013-10-07 15:17     ` Nicolas Ferre
2013-10-07 15:17     ` Nicolas Ferre
2013-10-07 16:06     ` boris brezillon
2013-10-07 16:06       ` boris brezillon
2013-10-07 16:06       ` boris brezillon
2013-08-08  5:06 ` [PATCH v3 05/19] clk: at91: add PMC main clock Boris BREZILLON
2013-08-08  5:06   ` Boris BREZILLON
2013-10-07 16:51   ` Nicolas Ferre
2013-10-07 16:51     ` Nicolas Ferre
2013-10-07 16:51     ` Nicolas Ferre
2013-10-07 19:11     ` boris brezillon
2013-10-07 19:11       ` boris brezillon
2013-10-08  8:24       ` Nicolas Ferre
2013-10-08  8:24         ` Nicolas Ferre
2013-10-08  8:24         ` Nicolas Ferre
2013-10-08  9:00         ` boris brezillon
2013-10-08  9:00           ` boris brezillon
2013-10-08  9:00           ` boris brezillon
2013-08-08  6:07 ` [PATCH v3 06/19] clk: at91: add PMC pll clocks Boris BREZILLON
2013-08-08  6:07   ` Boris BREZILLON
2013-10-08 10:28   ` Nicolas Ferre
2013-10-08 10:28     ` Nicolas Ferre
2013-10-08 10:28     ` Nicolas Ferre
2013-10-08 11:45     ` boris brezillon
2013-10-08 11:45       ` boris brezillon
2013-10-08 11:45       ` boris brezillon
2013-08-08  6:09 ` [PATCH v3 07/19] clk: at91: add pll id macros for pll dt bindings Boris BREZILLON
2013-08-08  6:09   ` Boris BREZILLON
2013-10-08 10:30   ` Nicolas Ferre
2013-10-08 10:30     ` Nicolas Ferre
2013-10-08 10:30     ` Nicolas Ferre
2013-10-08 12:03     ` boris brezillon
2013-10-08 12:03       ` boris brezillon
2013-08-08  6:10 ` [PATCH v3 08/19] clk: at91: add PMC master clock Boris BREZILLON
2013-08-08  6:10   ` Boris BREZILLON
2013-08-08  6:12 ` [PATCH v3 09/19] clk: at91: add PMC system clocks Boris BREZILLON
2013-08-08  6:12   ` Boris BREZILLON
2013-10-08 15:32   ` Nicolas Ferre
2013-10-08 15:32     ` Nicolas Ferre
2013-10-08 15:32     ` Nicolas Ferre
2013-08-08  6:15 ` [PATCH v3 10/19] ARM: at91/dt: add system clk id definitions in dt-bindings include dir Boris BREZILLON
2013-08-08  6:15   ` Boris BREZILLON
2013-10-08 15:36   ` Nicolas Ferre
2013-10-08 15:36     ` Nicolas Ferre
2013-10-08 15:36     ` Nicolas Ferre
2013-08-08  6:16 ` [PATCH v3 11/19] clk: at91: add PMC peripheral clocks Boris BREZILLON
2013-08-08  6:16   ` Boris BREZILLON
2013-10-08 15:43   ` Nicolas Ferre
2013-10-08 15:43     ` Nicolas Ferre
2013-10-08 15:43     ` Nicolas Ferre
2013-08-08  7:10 ` [PATCH v3 12/19] clk: at91: add peripheral clk macros for peripheral clk dt bindings Boris BREZILLON
2013-08-08  7:10   ` Boris BREZILLON
2013-10-08 15:44   ` Nicolas Ferre
2013-10-08 15:44     ` Nicolas Ferre
2013-10-08 15:44     ` Nicolas Ferre
2013-10-08 16:01     ` boris brezillon
2013-10-08 16:01       ` boris brezillon
2013-10-08 16:15       ` Nicolas Ferre
2013-10-08 16:15         ` Nicolas Ferre
2013-10-08 16:15         ` Nicolas Ferre
2013-10-08 16:19         ` boris brezillon
2013-10-08 16:19           ` boris brezillon
2013-08-08  7:12 ` [PATCH v3 13/19] clk: at91: add PMC programmable clocks Boris BREZILLON
2013-08-08  7:12   ` Boris BREZILLON
2013-10-08 16:02   ` Nicolas Ferre
2013-10-08 16:02     ` Nicolas Ferre
2013-10-08 16:02     ` Nicolas Ferre
2013-10-08 16:06     ` Nicolas Ferre [this message]
2013-10-08 16:06       ` Nicolas Ferre
2013-10-08 16:06       ` Nicolas Ferre
2013-08-08  7:14 ` [PATCH v3 14/19] clk: at91: add PMC utmi clock Boris BREZILLON
2013-08-08  7:14   ` Boris BREZILLON
2013-10-08 16:08   ` Nicolas Ferre
2013-10-08 16:08     ` Nicolas Ferre
2013-10-08 16:08     ` Nicolas Ferre
2013-08-08  7:15 ` [PATCH v3 15/19] clk: at91: add PMC usb clock Boris BREZILLON
2013-08-08  7:15   ` Boris BREZILLON
2013-10-08 16:20   ` Nicolas Ferre
2013-10-08 16:20     ` Nicolas Ferre
2013-10-08 16:20     ` Nicolas Ferre
2013-08-08  7:17 ` [PATCH v3 16/19] clk: at91: add PMC smd clock Boris BREZILLON
2013-08-08  7:17   ` Boris BREZILLON
2013-10-08 16:22   ` Nicolas Ferre
2013-10-08 16:22     ` Nicolas Ferre
2013-10-08 16:22     ` Nicolas Ferre
2013-08-08  7:19 ` [PATCH v3 17/19] clk: at91: add PMC clk device tree binding doc Boris BREZILLON
2013-08-08  7:19   ` Boris BREZILLON
2013-10-08  9:44   ` Nicolas Ferre
2013-10-08  9:44     ` Nicolas Ferre
2013-10-08  9:44     ` Nicolas Ferre
2013-10-08 12:37     ` boris brezillon
2013-10-08 12:37       ` boris brezillon
2013-10-08 12:37       ` boris brezillon
2013-10-08 12:42       ` Nicolas Ferre
2013-10-08 12:42         ` Nicolas Ferre
2013-10-08 12:42         ` Nicolas Ferre
2013-08-08  8:17 ` [PATCH v3 18/19] ARM: at91: move pit timer to common clk framework Boris BREZILLON
2013-08-08  8:17   ` Boris BREZILLON
2013-10-08 16:28   ` Nicolas Ferre
2013-10-08 16:28     ` Nicolas Ferre
2013-10-08 16:28     ` Nicolas Ferre
2013-08-08  8:19 ` [PATCH v3 19/19] ARM: at91: add new compatible strings for pmc driver Boris BREZILLON
2013-08-08  8:19   ` Boris BREZILLON
2013-10-08 16:29   ` Nicolas Ferre
2013-10-08 16:29     ` Nicolas Ferre
2013-10-08 16:29     ` Nicolas Ferre
2013-08-20 10:21 ` [PATCH v3 00/19] ARM: at91: move to common clk framework boris brezillon
2013-08-20 10:21   ` boris brezillon
2013-10-07 20:06   ` Mike Turquette
2013-10-07 20:06     ` Mike Turquette

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52542D8D.1030006@atmel.com \
    --to=nicolas.ferre@atmel.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.