* Problem with image types @ 2013-10-11 14:38 Gary Thomas 2013-10-11 14:39 ` Chris Larson 0 siblings, 1 reply; 11+ messages in thread From: Gary Thomas @ 2013-10-11 14:38 UTC (permalink / raw) To: meta-freescale I'm using image_types_fsl from meta-fsl-arm and running into some issues. If I set IMAGE_FSTYPES="tar.bz2 ext3 sdcard" IMAGE_CLASSES="image_types_fsl" I only end up with .ext3 and .sdcard images - no .tar.bz2. If I use the default IMAGE_CLASSES="image_types" then I get .tar.bz2 but no .sdcard How can I have them all at once? n.b. I'm using the latest master on all trees -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Problem with image types 2013-10-11 14:38 Problem with image types Gary Thomas @ 2013-10-11 14:39 ` Chris Larson 2013-10-11 14:52 ` Gary Thomas 0 siblings, 1 reply; 11+ messages in thread From: Chris Larson @ 2013-10-11 14:39 UTC (permalink / raw) To: Gary Thomas; +Cc: meta-freescale@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 721 bytes --] On Fri, Oct 11, 2013 at 7:38 AM, Gary Thomas <gary@mlbassoc.com> wrote: > I'm using image_types_fsl from meta-fsl-arm and running into > some issues. If I set > IMAGE_FSTYPES="tar.bz2 ext3 sdcard" > IMAGE_CLASSES="image_types_**fsl" > I only end up with .ext3 and .sdcard images - no .tar.bz2. > If I use the default > IMAGE_CLASSES="image_types" > then I get .tar.bz2 but no .sdcard > > How can I have them all at once? > Note that IMAGE_CLASSES is plural, not singular :) IMAGE_CLASSES = "image_types image_types_fsl", presumably. -- Christopher Larson clarson at kergoth dot com Founder - BitBake, OpenEmbedded, OpenZaurus Maintainer - Tslib Senior Software Engineer, Mentor Graphics [-- Attachment #2: Type: text/html, Size: 1207 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Problem with image types 2013-10-11 14:39 ` Chris Larson @ 2013-10-11 14:52 ` Gary Thomas 2013-10-11 15:35 ` Eric Bénard 0 siblings, 1 reply; 11+ messages in thread From: Gary Thomas @ 2013-10-11 14:52 UTC (permalink / raw) To: Chris Larson; +Cc: meta-freescale@yoctoproject.org On 2013-10-11 08:39, Chris Larson wrote: > > On Fri, Oct 11, 2013 at 7:38 AM, Gary Thomas <gary@mlbassoc.com <mailto:gary@mlbassoc.com>> wrote: > > I'm using image_types_fsl from meta-fsl-arm and running into > some issues. If I set > IMAGE_FSTYPES="tar.bz2 ext3 sdcard" > IMAGE_CLASSES="image_types_fsl" > I only end up with .ext3 and .sdcard images - no .tar.bz2. > If I use the default > IMAGE_CLASSES="image_types" > then I get .tar.bz2 but no .sdcard > > How can I have them all at once? > > > Note that IMAGE_CLASSES is plural, not singular :) > > IMAGE_CLASSES = "image_types image_types_fsl", presumably. When I tried that, I got the same results as just IMAGE_CLASSES="image_types" Also, meta-fsl-arm/classes/image_types_fsl.bbclass inherits "image_types" so I don't think it should be necessary to list them both. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Problem with image types 2013-10-11 14:52 ` Gary Thomas @ 2013-10-11 15:35 ` Eric Bénard 2013-10-11 15:37 ` Gary Thomas 0 siblings, 1 reply; 11+ messages in thread From: Eric Bénard @ 2013-10-11 15:35 UTC (permalink / raw) To: Gary Thomas; +Cc: meta-freescale@yoctoproject.org Le Fri, 11 Oct 2013 08:52:30 -0600, Gary Thomas <gary@mlbassoc.com> a écrit : > On 2013-10-11 08:39, Chris Larson wrote: > > > > On Fri, Oct 11, 2013 at 7:38 AM, Gary Thomas <gary@mlbassoc.com <mailto:gary@mlbassoc.com>> wrote: > > > > I'm using image_types_fsl from meta-fsl-arm and running into > > some issues. If I set > > IMAGE_FSTYPES="tar.bz2 ext3 sdcard" > > IMAGE_CLASSES="image_types_fsl" > > I only end up with .ext3 and .sdcard images - no .tar.bz2. > > If I use the default > > IMAGE_CLASSES="image_types" > > then I get .tar.bz2 but no .sdcard > > > > How can I have them all at once? > > > > > > Note that IMAGE_CLASSES is plural, not singular :) > > > > IMAGE_CLASSES = "image_types image_types_fsl", presumably. > > When I tried that, I got the same results as just IMAGE_CLASSES="image_types" > Also, meta-fsl-arm/classes/image_types_fsl.bbclass inherits "image_types" so > I don't think it should be necessary to list them both. > don't you have a IMAGE_FSTYPES="ext3 sdcard" hardcoded somewhere in your machine file ? Eric ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Problem with image types 2013-10-11 15:35 ` Eric Bénard @ 2013-10-11 15:37 ` Gary Thomas 2013-10-11 16:13 ` Eric Bénard 0 siblings, 1 reply; 11+ messages in thread From: Gary Thomas @ 2013-10-11 15:37 UTC (permalink / raw) To: Eric Bénard; +Cc: meta-freescale@yoctoproject.org On 2013-10-11 09:35, Eric Bénard wrote: > Le Fri, 11 Oct 2013 08:52:30 -0600, > Gary Thomas <gary@mlbassoc.com> a écrit : > >> On 2013-10-11 08:39, Chris Larson wrote: >>> >>> On Fri, Oct 11, 2013 at 7:38 AM, Gary Thomas <gary@mlbassoc.com <mailto:gary@mlbassoc.com>> wrote: >>> >>> I'm using image_types_fsl from meta-fsl-arm and running into >>> some issues. If I set >>> IMAGE_FSTYPES="tar.bz2 ext3 sdcard" >>> IMAGE_CLASSES="image_types_fsl" >>> I only end up with .ext3 and .sdcard images - no .tar.bz2. >>> If I use the default >>> IMAGE_CLASSES="image_types" >>> then I get .tar.bz2 but no .sdcard >>> >>> How can I have them all at once? >>> >>> >>> Note that IMAGE_CLASSES is plural, not singular :) >>> >>> IMAGE_CLASSES = "image_types image_types_fsl", presumably. >> >> When I tried that, I got the same results as just IMAGE_CLASSES="image_types" >> Also, meta-fsl-arm/classes/image_types_fsl.bbclass inherits "image_types" so >> I don't think it should be necessary to list them both. >> > don't you have a IMAGE_FSTYPES="ext3 sdcard" hardcoded somewhere in > your machine file ? No, as seen above, IMAGE_FSTYPES="tar.bz2 ext3 sdcard" -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Problem with image types 2013-10-11 15:37 ` Gary Thomas @ 2013-10-11 16:13 ` Eric Bénard 2013-10-11 16:18 ` Gary Thomas 0 siblings, 1 reply; 11+ messages in thread From: Eric Bénard @ 2013-10-11 16:13 UTC (permalink / raw) To: Gary Thomas; +Cc: meta-freescale@yoctoproject.org Le Fri, 11 Oct 2013 09:37:48 -0600, Gary Thomas <gary@mlbassoc.com> a écrit : > On 2013-10-11 09:35, Eric Bénard wrote: > > Le Fri, 11 Oct 2013 08:52:30 -0600, > > Gary Thomas <gary@mlbassoc.com> a écrit : > > > >> On 2013-10-11 08:39, Chris Larson wrote: > >>> > >>> On Fri, Oct 11, 2013 at 7:38 AM, Gary Thomas <gary@mlbassoc.com <mailto:gary@mlbassoc.com>> wrote: > >>> > >>> I'm using image_types_fsl from meta-fsl-arm and running into > >>> some issues. If I set > >>> IMAGE_FSTYPES="tar.bz2 ext3 sdcard" > >>> IMAGE_CLASSES="image_types_fsl" > >>> I only end up with .ext3 and .sdcard images - no .tar.bz2. > >>> If I use the default > >>> IMAGE_CLASSES="image_types" > >>> then I get .tar.bz2 but no .sdcard > >>> > >>> How can I have them all at once? > >>> > >>> > >>> Note that IMAGE_CLASSES is plural, not singular :) > >>> > >>> IMAGE_CLASSES = "image_types image_types_fsl", presumably. > >> > >> When I tried that, I got the same results as just IMAGE_CLASSES="image_types" > >> Also, meta-fsl-arm/classes/image_types_fsl.bbclass inherits "image_types" so > >> I don't think it should be necessary to list them both. > >> > > don't you have a IMAGE_FSTYPES="ext3 sdcard" hardcoded somewhere in > > your machine file ? > > No, as seen above, IMAGE_FSTYPES="tar.bz2 ext3 sdcard" > bitbake yourimage -e may help to understand how IMAGE_FSTYPES is built. Eric ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Problem with image types 2013-10-11 16:13 ` Eric Bénard @ 2013-10-11 16:18 ` Gary Thomas 2013-10-11 16:15 ` Daiane Angolini 2013-10-11 16:45 ` Eric Bénard 0 siblings, 2 replies; 11+ messages in thread From: Gary Thomas @ 2013-10-11 16:18 UTC (permalink / raw) To: Eric Bénard; +Cc: meta-freescale@yoctoproject.org On 2013-10-11 10:13, Eric Bénard wrote: > Le Fri, 11 Oct 2013 09:37:48 -0600, > Gary Thomas <gary@mlbassoc.com> a écrit : > >> On 2013-10-11 09:35, Eric Bénard wrote: >>> Le Fri, 11 Oct 2013 08:52:30 -0600, >>> Gary Thomas <gary@mlbassoc.com> a écrit : >>> >>>> On 2013-10-11 08:39, Chris Larson wrote: >>>>> >>>>> On Fri, Oct 11, 2013 at 7:38 AM, Gary Thomas <gary@mlbassoc.com <mailto:gary@mlbassoc.com>> wrote: >>>>> >>>>> I'm using image_types_fsl from meta-fsl-arm and running into >>>>> some issues. If I set >>>>> IMAGE_FSTYPES="tar.bz2 ext3 sdcard" >>>>> IMAGE_CLASSES="image_types_fsl" >>>>> I only end up with .ext3 and .sdcard images - no .tar.bz2. >>>>> If I use the default >>>>> IMAGE_CLASSES="image_types" >>>>> then I get .tar.bz2 but no .sdcard >>>>> >>>>> How can I have them all at once? >>>>> >>>>> >>>>> Note that IMAGE_CLASSES is plural, not singular :) >>>>> >>>>> IMAGE_CLASSES = "image_types image_types_fsl", presumably. >>>> >>>> When I tried that, I got the same results as just IMAGE_CLASSES="image_types" >>>> Also, meta-fsl-arm/classes/image_types_fsl.bbclass inherits "image_types" so >>>> I don't think it should be necessary to list them both. >>>> >>> don't you have a IMAGE_FSTYPES="ext3 sdcard" hardcoded somewhere in >>> your machine file ? >> >> No, as seen above, IMAGE_FSTYPES="tar.bz2 ext3 sdcard" >> > bitbake yourimage -e may help to understand how IMAGE_FSTYPES is built. I had already done this - that's where the quoted values are from. IMAGE_FSTYPES definitely contains all three types, but only .ext3 and .sdcard are being built if I use image_types_fsl. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Problem with image types 2013-10-11 16:18 ` Gary Thomas @ 2013-10-11 16:15 ` Daiane Angolini 2013-10-11 16:45 ` Eric Bénard 1 sibling, 0 replies; 11+ messages in thread From: Daiane Angolini @ 2013-10-11 16:15 UTC (permalink / raw) To: Gary Thomas, Eric Bénard; +Cc: meta-freescale@yoctoproject.org On 10/11/2013 01:18 PM, Gary Thomas wrote: > On 2013-10-11 10:13, Eric Bénard wrote: >> Le Fri, 11 Oct 2013 09:37:48 -0600, >> Gary Thomas <gary@mlbassoc.com> a écrit : >> >>> On 2013-10-11 09:35, Eric Bénard wrote: >>>> Le Fri, 11 Oct 2013 08:52:30 -0600, >>>> Gary Thomas <gary@mlbassoc.com> a écrit : >>>> >>>>> On 2013-10-11 08:39, Chris Larson wrote: >>>>>> >>>>>> On Fri, Oct 11, 2013 at 7:38 AM, Gary Thomas <gary@mlbassoc.com >>>>>> <mailto:gary@mlbassoc.com>> wrote: >>>>>> >>>>>> I'm using image_types_fsl from meta-fsl-arm and running into >>>>>> some issues. If I set >>>>>> IMAGE_FSTYPES="tar.bz2 ext3 sdcard" >>>>>> IMAGE_CLASSES="image_types_fsl" >>>>>> I only end up with .ext3 and .sdcard images - no .tar.bz2. >>>>>> If I use the default >>>>>> IMAGE_CLASSES="image_types" >>>>>> then I get .tar.bz2 but no .sdcard >>>>>> >>>>>> How can I have them all at once? >>>>>> >>>>>> >>>>>> Note that IMAGE_CLASSES is plural, not singular :) >>>>>> >>>>>> IMAGE_CLASSES = "image_types image_types_fsl", presumably. >>>>> >>>>> When I tried that, I got the same results as just >>>>> IMAGE_CLASSES="image_types" >>>>> Also, meta-fsl-arm/classes/image_types_fsl.bbclass inherits >>>>> "image_types" so >>>>> I don't think it should be necessary to list them both. >>>>> >>>> don't you have a IMAGE_FSTYPES="ext3 sdcard" hardcoded somewhere in >>>> your machine file ? >>> >>> No, as seen above, IMAGE_FSTYPES="tar.bz2 ext3 sdcard" >>> >> bitbake yourimage -e may help to understand how IMAGE_FSTYPES is built. > > I had already done this - that's where the quoted values are from. > IMAGE_FSTYPES > definitely contains all three types, but only .ext3 and .sdcard are being > built if I use image_types_fsl. > Other idea for debug is the log.do_rootfs -- Daiane ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Problem with image types 2013-10-11 16:18 ` Gary Thomas 2013-10-11 16:15 ` Daiane Angolini @ 2013-10-11 16:45 ` Eric Bénard 2013-10-11 18:03 ` Gary Thomas 2013-10-11 18:57 ` Eric Bénard 1 sibling, 2 replies; 11+ messages in thread From: Eric Bénard @ 2013-10-11 16:45 UTC (permalink / raw) To: Gary Thomas; +Cc: meta-freescale@yoctoproject.org Le Fri, 11 Oct 2013 10:18:38 -0600, Gary Thomas <gary@mlbassoc.com> a écrit : > On 2013-10-11 10:13, Eric Bénard wrote: > > Le Fri, 11 Oct 2013 09:37:48 -0600, > > Gary Thomas <gary@mlbassoc.com> a écrit : > > > >> On 2013-10-11 09:35, Eric Bénard wrote: > >>> Le Fri, 11 Oct 2013 08:52:30 -0600, > >>> Gary Thomas <gary@mlbassoc.com> a écrit : > >>> > >>>> On 2013-10-11 08:39, Chris Larson wrote: > >>>>> > >>>>> On Fri, Oct 11, 2013 at 7:38 AM, Gary Thomas <gary@mlbassoc.com <mailto:gary@mlbassoc.com>> wrote: > >>>>> > >>>>> I'm using image_types_fsl from meta-fsl-arm and running into > >>>>> some issues. If I set > >>>>> IMAGE_FSTYPES="tar.bz2 ext3 sdcard" > >>>>> IMAGE_CLASSES="image_types_fsl" > >>>>> I only end up with .ext3 and .sdcard images - no .tar.bz2. > >>>>> If I use the default > >>>>> IMAGE_CLASSES="image_types" > >>>>> then I get .tar.bz2 but no .sdcard > >>>>> > >>>>> How can I have them all at once? > >>>>> > >>>>> > >>>>> Note that IMAGE_CLASSES is plural, not singular :) > >>>>> > >>>>> IMAGE_CLASSES = "image_types image_types_fsl", presumably. > >>>> > >>>> When I tried that, I got the same results as just IMAGE_CLASSES="image_types" > >>>> Also, meta-fsl-arm/classes/image_types_fsl.bbclass inherits "image_types" so > >>>> I don't think it should be necessary to list them both. > >>>> > >>> don't you have a IMAGE_FSTYPES="ext3 sdcard" hardcoded somewhere in > >>> your machine file ? > >> > >> No, as seen above, IMAGE_FSTYPES="tar.bz2 ext3 sdcard" > >> > > bitbake yourimage -e may help to understand how IMAGE_FSTYPES is built. > > I had already done this - that's where the quoted values are from. IMAGE_FSTYPES > definitely contains all three types, but only .ext3 and .sdcard are being > built if I use image_types_fsl. > strange I've launched a build for nitrogen6x to see if I reproduce the problem here. Usually I don't touch IMAGE_CLASSES but only IMAGE_FSTYPES (as IMAGE_CLASSES is set by IMAGE_CLASSES += "image_types_fsl" in ./conf/machine/include/fsl-default-settings.inc) Eric ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Problem with image types 2013-10-11 16:45 ` Eric Bénard @ 2013-10-11 18:03 ` Gary Thomas 2013-10-11 18:57 ` Eric Bénard 1 sibling, 0 replies; 11+ messages in thread From: Gary Thomas @ 2013-10-11 18:03 UTC (permalink / raw) To: Eric Bénard; +Cc: meta-freescale@yoctoproject.org On 2013-10-11 10:45, Eric Bénard wrote: > Le Fri, 11 Oct 2013 10:18:38 -0600, > Gary Thomas <gary@mlbassoc.com> a écrit : > >> On 2013-10-11 10:13, Eric Bénard wrote: >>> Le Fri, 11 Oct 2013 09:37:48 -0600, >>> Gary Thomas <gary@mlbassoc.com> a écrit : >>> >>>> On 2013-10-11 09:35, Eric Bénard wrote: >>>>> Le Fri, 11 Oct 2013 08:52:30 -0600, >>>>> Gary Thomas <gary@mlbassoc.com> a écrit : >>>>> >>>>>> On 2013-10-11 08:39, Chris Larson wrote: >>>>>>> >>>>>>> On Fri, Oct 11, 2013 at 7:38 AM, Gary Thomas <gary@mlbassoc.com <mailto:gary@mlbassoc.com>> wrote: >>>>>>> >>>>>>> I'm using image_types_fsl from meta-fsl-arm and running into >>>>>>> some issues. If I set >>>>>>> IMAGE_FSTYPES="tar.bz2 ext3 sdcard" >>>>>>> IMAGE_CLASSES="image_types_fsl" >>>>>>> I only end up with .ext3 and .sdcard images - no .tar.bz2. >>>>>>> If I use the default >>>>>>> IMAGE_CLASSES="image_types" >>>>>>> then I get .tar.bz2 but no .sdcard >>>>>>> >>>>>>> How can I have them all at once? >>>>>>> >>>>>>> >>>>>>> Note that IMAGE_CLASSES is plural, not singular :) >>>>>>> >>>>>>> IMAGE_CLASSES = "image_types image_types_fsl", presumably. >>>>>> >>>>>> When I tried that, I got the same results as just IMAGE_CLASSES="image_types" >>>>>> Also, meta-fsl-arm/classes/image_types_fsl.bbclass inherits "image_types" so >>>>>> I don't think it should be necessary to list them both. >>>>>> >>>>> don't you have a IMAGE_FSTYPES="ext3 sdcard" hardcoded somewhere in >>>>> your machine file ? >>>> >>>> No, as seen above, IMAGE_FSTYPES="tar.bz2 ext3 sdcard" >>>> >>> bitbake yourimage -e may help to understand how IMAGE_FSTYPES is built. >> >> I had already done this - that's where the quoted values are from. IMAGE_FSTYPES >> definitely contains all three types, but only .ext3 and .sdcard are being >> built if I use image_types_fsl. >> > strange I've launched a build for nitrogen6x to see if I reproduce the > problem here. I'm not sure what happened, but I just ran another build and now all is happy. I must have made a typo or some such to cause my confusion. Seems like it is working as expected - sorry for the noise. > Usually I don't touch IMAGE_CLASSES but only IMAGE_FSTYPES > (as IMAGE_CLASSES is set by IMAGE_CLASSES += "image_types_fsl" > in ./conf/machine/include/fsl-default-settings.inc) -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Problem with image types 2013-10-11 16:45 ` Eric Bénard 2013-10-11 18:03 ` Gary Thomas @ 2013-10-11 18:57 ` Eric Bénard 1 sibling, 0 replies; 11+ messages in thread From: Eric Bénard @ 2013-10-11 18:57 UTC (permalink / raw) To: Eric Bénard; +Cc: meta-freescale@yoctoproject.org Le Fri, 11 Oct 2013 18:45:05 +0200, Eric Bénard <eric@eukrea.com> a écrit : > strange I've launched a build for nitrogen6x to see if I reproduce the > problem here. > Usually I don't touch IMAGE_CLASSES but only IMAGE_FSTYPES > (as IMAGE_CLASSES is set by IMAGE_CLASSES += "image_types_fsl" > in ./conf/machine/include/fsl-default-settings.inc) > and in the end I get .ext3 .sdcard and .tar.bz2 files. Note that I'm not changing IMAGE_CLASSES nor IMAGe_FSTYPES anywhere. Eric ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2013-10-11 18:57 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-10-11 14:38 Problem with image types Gary Thomas 2013-10-11 14:39 ` Chris Larson 2013-10-11 14:52 ` Gary Thomas 2013-10-11 15:35 ` Eric Bénard 2013-10-11 15:37 ` Gary Thomas 2013-10-11 16:13 ` Eric Bénard 2013-10-11 16:18 ` Gary Thomas 2013-10-11 16:15 ` Daiane Angolini 2013-10-11 16:45 ` Eric Bénard 2013-10-11 18:03 ` Gary Thomas 2013-10-11 18:57 ` Eric Bénard
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.