* [PATCH][RESEND] ARM: SAMSUNG: remove IRQF_DISABLED [not found] <000801cec874$%han@samsung.com> @ 2013-12-09 9:02 ` Michael Opdenacker 0 siblings, 0 replies; 4+ messages in thread From: Michael Opdenacker @ 2013-12-09 9:02 UTC (permalink / raw) To: ben-linux, kgene.kim, linux Cc: linux-arm-kernel, linux-samsung-soc, linux-kernel, Michael Opdenacker This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> --- arch/arm/mach-s3c24xx/dma.c | 2 +- arch/arm/mach-s3c24xx/simtec-usb.c | 3 +-- arch/arm/mach-s3c64xx/mach-smartq.c | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c index 4a65cba3295d..a8dafc174fe3 100644 --- a/arch/arm/mach-s3c24xx/dma.c +++ b/arch/arm/mach-s3c24xx/dma.c @@ -742,7 +742,7 @@ int s3c2410_dma_request(enum dma_ch channel, chan->irq_claimed = 1; local_irq_restore(flags); - err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED, + err = request_irq(chan->irq, s3c2410_dma_irq, 0, client->name, (void *)chan); local_irq_save(flags); diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c index 2ed2e32430dc..bb3eac6a7697 100644 --- a/arch/arm/mach-s3c24xx/simtec-usb.c +++ b/arch/arm/mach-s3c24xx/simtec-usb.c @@ -78,8 +78,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on) if (on) { ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq, - IRQF_DISABLED | IRQF_TRIGGER_RISING | - IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "USB Over-current", info); if (ret != 0) { printk(KERN_ERR "failed to request usb oc irq\n"); diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index a6b338fd0470..08a889c141da 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -106,7 +106,7 @@ static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on) if (on) { ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)), - smartq_usb_host_ocirq, IRQF_DISABLED | + smartq_usb_host_ocirq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "USB host overcurrent", info); if (ret != 0) -- 1.8.3.2 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH][RESEND] ARM: SAMSUNG: remove IRQF_DISABLED @ 2013-12-09 9:02 ` Michael Opdenacker 0 siblings, 0 replies; 4+ messages in thread From: Michael Opdenacker @ 2013-12-09 9:02 UTC (permalink / raw) To: linux-arm-kernel This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> --- arch/arm/mach-s3c24xx/dma.c | 2 +- arch/arm/mach-s3c24xx/simtec-usb.c | 3 +-- arch/arm/mach-s3c64xx/mach-smartq.c | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c index 4a65cba3295d..a8dafc174fe3 100644 --- a/arch/arm/mach-s3c24xx/dma.c +++ b/arch/arm/mach-s3c24xx/dma.c @@ -742,7 +742,7 @@ int s3c2410_dma_request(enum dma_ch channel, chan->irq_claimed = 1; local_irq_restore(flags); - err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED, + err = request_irq(chan->irq, s3c2410_dma_irq, 0, client->name, (void *)chan); local_irq_save(flags); diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c index 2ed2e32430dc..bb3eac6a7697 100644 --- a/arch/arm/mach-s3c24xx/simtec-usb.c +++ b/arch/arm/mach-s3c24xx/simtec-usb.c @@ -78,8 +78,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on) if (on) { ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq, - IRQF_DISABLED | IRQF_TRIGGER_RISING | - IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "USB Over-current", info); if (ret != 0) { printk(KERN_ERR "failed to request usb oc irq\n"); diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index a6b338fd0470..08a889c141da 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -106,7 +106,7 @@ static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on) if (on) { ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)), - smartq_usb_host_ocirq, IRQF_DISABLED | + smartq_usb_host_ocirq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "USB host overcurrent", info); if (ret != 0) -- 1.8.3.2 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH][RESEND] ARM: SAMSUNG: remove IRQF_DISABLED 2013-12-09 9:02 ` Michael Opdenacker @ 2013-12-09 21:17 ` Kukjin Kim -1 siblings, 0 replies; 4+ messages in thread From: Kukjin Kim @ 2013-12-09 21:17 UTC (permalink / raw) To: Michael Opdenacker Cc: ben-linux, kgene.kim, linux, linux-samsung-soc, linux-kernel, linux-arm-kernel On 12/09/13 18:02, Michael Opdenacker wrote: > This patch proposes to remove the use of the IRQF_DISABLED flag > > It's a NOOP since 2.6.35 and it will be removed one day. > > Signed-off-by: Michael Opdenacker<michael.opdenacker@free-electrons.com> > Reviewed-by: Jingoo Han<jg1.han@samsung.com> > --- > arch/arm/mach-s3c24xx/dma.c | 2 +- > arch/arm/mach-s3c24xx/simtec-usb.c | 3 +-- > arch/arm/mach-s3c64xx/mach-smartq.c | 2 +- > 3 files changed, 3 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c > index 4a65cba3295d..a8dafc174fe3 100644 > --- a/arch/arm/mach-s3c24xx/dma.c > +++ b/arch/arm/mach-s3c24xx/dma.c > @@ -742,7 +742,7 @@ int s3c2410_dma_request(enum dma_ch channel, > chan->irq_claimed = 1; > local_irq_restore(flags); > > - err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED, > + err = request_irq(chan->irq, s3c2410_dma_irq, 0, > client->name, (void *)chan); > > local_irq_save(flags); > diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c > index 2ed2e32430dc..bb3eac6a7697 100644 > --- a/arch/arm/mach-s3c24xx/simtec-usb.c > +++ b/arch/arm/mach-s3c24xx/simtec-usb.c > @@ -78,8 +78,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on) > > if (on) { > ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq, > - IRQF_DISABLED | IRQF_TRIGGER_RISING | > - IRQF_TRIGGER_FALLING, > + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, > "USB Over-current", info); > if (ret != 0) { > printk(KERN_ERR "failed to request usb oc irq\n"); > diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c > index a6b338fd0470..08a889c141da 100644 > --- a/arch/arm/mach-s3c64xx/mach-smartq.c > +++ b/arch/arm/mach-s3c64xx/mach-smartq.c > @@ -106,7 +106,7 @@ static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on) > > if (on) { > ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)), > - smartq_usb_host_ocirq, IRQF_DISABLED | > + smartq_usb_host_ocirq, > IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, > "USB host overcurrent", info); > if (ret != 0) Looks OK to me, applied. Thanks, Kukjin ^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH][RESEND] ARM: SAMSUNG: remove IRQF_DISABLED @ 2013-12-09 21:17 ` Kukjin Kim 0 siblings, 0 replies; 4+ messages in thread From: Kukjin Kim @ 2013-12-09 21:17 UTC (permalink / raw) To: linux-arm-kernel On 12/09/13 18:02, Michael Opdenacker wrote: > This patch proposes to remove the use of the IRQF_DISABLED flag > > It's a NOOP since 2.6.35 and it will be removed one day. > > Signed-off-by: Michael Opdenacker<michael.opdenacker@free-electrons.com> > Reviewed-by: Jingoo Han<jg1.han@samsung.com> > --- > arch/arm/mach-s3c24xx/dma.c | 2 +- > arch/arm/mach-s3c24xx/simtec-usb.c | 3 +-- > arch/arm/mach-s3c64xx/mach-smartq.c | 2 +- > 3 files changed, 3 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c > index 4a65cba3295d..a8dafc174fe3 100644 > --- a/arch/arm/mach-s3c24xx/dma.c > +++ b/arch/arm/mach-s3c24xx/dma.c > @@ -742,7 +742,7 @@ int s3c2410_dma_request(enum dma_ch channel, > chan->irq_claimed = 1; > local_irq_restore(flags); > > - err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED, > + err = request_irq(chan->irq, s3c2410_dma_irq, 0, > client->name, (void *)chan); > > local_irq_save(flags); > diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c > index 2ed2e32430dc..bb3eac6a7697 100644 > --- a/arch/arm/mach-s3c24xx/simtec-usb.c > +++ b/arch/arm/mach-s3c24xx/simtec-usb.c > @@ -78,8 +78,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on) > > if (on) { > ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq, > - IRQF_DISABLED | IRQF_TRIGGER_RISING | > - IRQF_TRIGGER_FALLING, > + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, > "USB Over-current", info); > if (ret != 0) { > printk(KERN_ERR "failed to request usb oc irq\n"); > diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c > index a6b338fd0470..08a889c141da 100644 > --- a/arch/arm/mach-s3c64xx/mach-smartq.c > +++ b/arch/arm/mach-s3c64xx/mach-smartq.c > @@ -106,7 +106,7 @@ static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on) > > if (on) { > ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)), > - smartq_usb_host_ocirq, IRQF_DISABLED | > + smartq_usb_host_ocirq, > IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, > "USB host overcurrent", info); > if (ret != 0) Looks OK to me, applied. Thanks, Kukjin ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-12-09 21:17 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <000801cec874$%han@samsung.com>
2013-12-09 9:02 ` [PATCH][RESEND] ARM: SAMSUNG: remove IRQF_DISABLED Michael Opdenacker
2013-12-09 9:02 ` Michael Opdenacker
2013-12-09 21:17 ` Kukjin Kim
2013-12-09 21:17 ` Kukjin Kim
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.