From: syin@broadcom.com (Sherman Yin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/6] ARM: pinctrl: Add Broadcom Capri pinctrl driver
Date: Fri, 20 Dec 2013 18:31:42 -0800 [thread overview]
Message-ID: <52B4FD8E.1010009@broadcom.com> (raw)
In-Reply-To: <52B23618.2040508@broadcom.com>
On 13-12-18 03:56 PM, Sherman Yin wrote:
> On 13-12-12 12:54 PM, Linus Walleij wrote:
>>> +/*
>>> + * Write to the register using the value and mask if current value
>>> is different
>>> + */
>>> +static void capri_reg_write(struct pinctrl_dev *pctldev,
>>> + void __iomem *reg,
>>> + u32 val,
>>> + u32 mask)
>>> +{
>>> + u32 old_val;
>>> + u32 new_val;
>>> +
>>> + old_val = readl(reg);
>>> + new_val = (old_val & ~mask) | (val & mask);
>>> +
>>> + if (new_val == old_val) {
>>> + dev_dbg(pctldev->dev,
>>> + "Reg 0x%p=0x%x (no change)\n",
>>> + reg, old_val);
>>> + return;
>>> + }
>>> +
>>> + dev_dbg(pctldev->dev,
>>> + "Reg 0x%p change from 0x%x to 0x%x\n",
>>> + reg, old_val, new_val);
>>> + writel(new_val, reg);
>>> +}
>>
>> This is a reimplementation of regmap for MMIO.
>> See drivers/base/regmap/regmap-mmio.c
>> Notice how regmap_update_bits() is used throughout the
>> kernel.
>>
>> If you want to do this, use regmap.
>
> Ok.
As you can see in v4 of my patchset, I've changed my driver to use the
mmio regmap. However, as I was tracing through regmap_update_bits(), it
looks like I have to go through a lot of checks and function pointers
just to do a simple write to a register. Also, I have to select
REGMAP_MMIO which brings in a bunch of code as well.
I understand the benefits of using common code, but in this case it
seems there is a lot of extra code and run-time overhead to use regmap.
In the end it also doesn't buy much in terms of functionality.
Just a quick note - it looks like the 2nd parameter of
regmap_update_bits() wants the offset of a register (offset from
regmap_mmio_context.regs). So calling the parameter "reg" is a little
confusing, at least in the MMIO case.
Regards,
Sherman
WARNING: multiple messages have this Message-ID (diff)
From: Sherman Yin <syin@broadcom.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Mark Brown <broonie@kernel.org>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"Christian Daudt" <bcm@fixthebug.org>,
"Russell King" <linux@arm.linux.org.uk>,
"Heiko Stübner" <heiko@sntech.de>,
"Pawel Moll" <pawel.moll@arm.com>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
"Stephen Warren" <swarren@wwwdotorg.org>,
"linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Rob Herring" <rob.herring@calxeda.com>,
bcm-kernel-feedback-list <bcm-kernel-feedback-list@broadcom.com>,
"Rob Landley" <rob@landley.net>,
"Grant Likely" <grant.likely@linaro.org>,
"Matt Porter" <matt.porter@linaro.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 5/6] ARM: pinctrl: Add Broadcom Capri pinctrl driver
Date: Fri, 20 Dec 2013 18:31:42 -0800 [thread overview]
Message-ID: <52B4FD8E.1010009@broadcom.com> (raw)
In-Reply-To: <52B23618.2040508@broadcom.com>
On 13-12-18 03:56 PM, Sherman Yin wrote:
> On 13-12-12 12:54 PM, Linus Walleij wrote:
>>> +/*
>>> + * Write to the register using the value and mask if current value
>>> is different
>>> + */
>>> +static void capri_reg_write(struct pinctrl_dev *pctldev,
>>> + void __iomem *reg,
>>> + u32 val,
>>> + u32 mask)
>>> +{
>>> + u32 old_val;
>>> + u32 new_val;
>>> +
>>> + old_val = readl(reg);
>>> + new_val = (old_val & ~mask) | (val & mask);
>>> +
>>> + if (new_val == old_val) {
>>> + dev_dbg(pctldev->dev,
>>> + "Reg 0x%p=0x%x (no change)\n",
>>> + reg, old_val);
>>> + return;
>>> + }
>>> +
>>> + dev_dbg(pctldev->dev,
>>> + "Reg 0x%p change from 0x%x to 0x%x\n",
>>> + reg, old_val, new_val);
>>> + writel(new_val, reg);
>>> +}
>>
>> This is a reimplementation of regmap for MMIO.
>> See drivers/base/regmap/regmap-mmio.c
>> Notice how regmap_update_bits() is used throughout the
>> kernel.
>>
>> If you want to do this, use regmap.
>
> Ok.
As you can see in v4 of my patchset, I've changed my driver to use the
mmio regmap. However, as I was tracing through regmap_update_bits(), it
looks like I have to go through a lot of checks and function pointers
just to do a simple write to a register. Also, I have to select
REGMAP_MMIO which brings in a bunch of code as well.
I understand the benefits of using common code, but in this case it
seems there is a lot of extra code and run-time overhead to use regmap.
In the end it also doesn't buy much in terms of functionality.
Just a quick note - it looks like the 2nd parameter of
regmap_update_bits() wants the offset of a register (offset from
regmap_mmio_context.regs). So calling the parameter "reg" is a little
confusing, at least in the MMIO case.
Regards,
Sherman
next prev parent reply other threads:[~2013-12-21 2:31 UTC|newest]
Thread overview: 196+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-04 0:23 [PATCH 0/4] Add Broadcom Capri pinctrl driver Sherman Yin
2013-10-04 0:23 ` Sherman Yin
2013-10-04 0:23 ` Sherman Yin
2013-10-04 0:23 ` [PATCH 1/4] pinctrl: Add void * to pinctrl_pin_desc Sherman Yin
2013-10-04 0:23 ` Sherman Yin
2013-10-09 8:55 ` Linus Walleij
2013-10-09 8:55 ` Linus Walleij
2013-10-09 8:55 ` Linus Walleij
2013-10-09 22:57 ` Sherman Yin
2013-10-09 22:57 ` Sherman Yin
2013-10-04 0:23 ` [PATCH 2/4] pinctrl: Add pinctrl binding for Broadcom Capri SoCs Sherman Yin
2013-10-04 0:23 ` Sherman Yin
2013-10-04 0:23 ` Sherman Yin
2013-10-04 12:51 ` Matt Porter
2013-10-04 12:51 ` Matt Porter
2013-10-09 8:53 ` Linus Walleij
2013-10-09 8:53 ` Linus Walleij
2013-10-09 8:53 ` Linus Walleij
2013-10-10 17:57 ` Sherman Yin
2013-10-10 17:57 ` Sherman Yin
2013-10-04 0:23 ` [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver Sherman Yin
2013-10-04 0:23 ` Sherman Yin
2013-10-04 0:23 ` Sherman Yin
2013-10-09 9:10 ` Linus Walleij
2013-10-09 9:10 ` Linus Walleij
2013-10-10 23:48 ` Sherman Yin
2013-10-10 23:48 ` Sherman Yin
2013-10-11 8:14 ` Linus Walleij
2013-10-11 8:14 ` Linus Walleij
2013-10-11 8:14 ` Linus Walleij
2013-10-11 18:25 ` Sherman Yin
2013-10-11 18:25 ` Sherman Yin
2013-10-22 23:29 ` Sherman Yin
2013-10-22 23:29 ` Sherman Yin
2013-10-25 22:48 ` Sherman Yin
2013-10-25 22:48 ` Sherman Yin
2013-11-04 12:24 ` Linus Walleij
2013-11-04 12:24 ` Linus Walleij
2013-11-04 23:26 ` Heiko Stübner
2013-11-04 23:26 ` Heiko Stübner
2013-11-05 0:04 ` Stephen Warren
2013-11-05 0:04 ` Stephen Warren
2013-11-06 2:02 ` Sherman Yin
2013-11-06 2:02 ` Sherman Yin
2013-11-06 9:40 ` Linus Walleij
2013-11-06 9:40 ` Linus Walleij
2013-11-08 0:29 ` Sherman Yin
2013-11-08 0:29 ` Sherman Yin
2013-11-11 10:01 ` Linus Walleij
2013-11-11 10:01 ` Linus Walleij
2013-11-13 23:43 ` Sherman Yin
2013-11-13 23:43 ` Sherman Yin
2013-11-13 23:43 ` Sherman Yin
2013-11-19 20:39 ` Linus Walleij
2013-11-19 20:39 ` Linus Walleij
2013-11-06 17:00 ` Stephen Warren
2013-11-06 17:00 ` Stephen Warren
2013-11-06 17:00 ` Stephen Warren
2013-11-07 22:01 ` Sherman Yin
2013-11-07 22:01 ` Sherman Yin
2013-11-06 9:29 ` Linus Walleij
2013-11-06 9:29 ` Linus Walleij
2013-10-17 6:03 ` Christian Daudt
2013-10-17 6:03 ` Christian Daudt
2013-10-17 14:54 ` Stephen Warren
2013-10-17 14:54 ` Stephen Warren
2013-10-17 15:31 ` Christian Daudt
2013-10-17 15:31 ` Christian Daudt
2013-12-11 0:05 ` Sherman Yin
2013-12-11 0:05 ` Sherman Yin
2013-12-12 20:43 ` Linus Walleij
2013-12-12 20:43 ` Linus Walleij
2013-10-04 0:23 ` [PATCH 4/4] pinctrl: Enable pinctrl for Broadcom Capri SoCs Sherman Yin
2013-10-04 0:23 ` Sherman Yin
2013-10-09 9:11 ` Linus Walleij
2013-10-09 9:11 ` Linus Walleij
2013-10-07 19:28 ` [PATCH v2 0/4] Add Broadcom Capri pinctrl driver Sherman Yin
2013-10-07 19:28 ` Sherman Yin
2013-10-07 19:28 ` [PATCH v2 1/4] pinctrl: Add void * to pinctrl_pin_desc Sherman Yin
2013-10-07 19:28 ` Sherman Yin
2013-10-07 19:28 ` [PATCH v2 2/4] pinctrl: Add pinctrl binding for Broadcom Capri SoCs Sherman Yin
2013-10-07 19:28 ` Sherman Yin
2013-10-07 19:28 ` [PATCH v2 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver Sherman Yin
2013-10-07 19:28 ` Sherman Yin
2013-10-07 19:28 ` [PATCH v2 4/4] pinctrl: Enable pinctrl for Broadcom Capri SoCs Sherman Yin
2013-10-07 19:28 ` Sherman Yin
2013-12-11 18:37 ` [PATCH v3 0/6] Add Broadcom Capri pinctrl driver Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-11 18:37 ` [PATCH v3 1/6] pinctrl: Add void * to pinctrl_pin_desc Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-11 18:37 ` [PATCH v3 2/6] pinctrl: Adds slew-rate, input-enable/disable Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-12 20:41 ` Linus Walleij
2013-12-12 20:41 ` Linus Walleij
2013-12-16 9:55 ` Linus Walleij
2013-12-16 9:55 ` Linus Walleij
2013-12-11 18:37 ` [PATCH v3 3/6] pinctrl: Make PINCTRL selectable by defconfig/menuconfig Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-12 20:39 ` Linus Walleij
2013-12-12 20:39 ` Linus Walleij
2013-12-12 21:35 ` Christian Daudt
2013-12-12 21:35 ` Christian Daudt
2013-12-16 10:01 ` Linus Walleij
2013-12-16 10:01 ` Linus Walleij
2013-12-17 0:18 ` Bjorn Andersson
2013-12-17 0:18 ` Bjorn Andersson
2013-12-17 0:18 ` Bjorn Andersson
2013-12-20 9:37 ` Linus Walleij
2013-12-20 9:37 ` Linus Walleij
2013-12-20 20:58 ` Arnd Bergmann
2013-12-20 20:58 ` Arnd Bergmann
2013-12-20 20:58 ` Arnd Bergmann
2013-12-21 2:15 ` Sherman Yin
2013-12-21 2:15 ` Sherman Yin
2013-12-11 18:37 ` [PATCH v3 4/6] pinctrl: Add pinctrl binding for Broadcom Capri SoCs Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-12 20:37 ` Linus Walleij
2013-12-12 20:37 ` Linus Walleij
2013-12-14 1:16 ` Sherman Yin
2013-12-14 1:16 ` Sherman Yin
2013-12-14 1:16 ` Sherman Yin
2013-12-16 13:17 ` Linus Walleij
2013-12-16 13:17 ` Linus Walleij
2013-12-18 2:02 ` Sherman Yin
2013-12-18 2:02 ` Sherman Yin
2013-12-18 2:02 ` Sherman Yin
2013-12-11 18:37 ` [PATCH v3 5/6] ARM: pinctrl: Add Broadcom Capri pinctrl driver Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-12 20:54 ` Linus Walleij
2013-12-12 20:54 ` Linus Walleij
2013-12-13 10:22 ` Mark Brown
2013-12-13 10:22 ` Mark Brown
2013-12-19 0:12 ` Sherman Yin
2013-12-19 0:12 ` Sherman Yin
2013-12-18 23:56 ` Sherman Yin
2013-12-18 23:56 ` Sherman Yin
2013-12-21 2:31 ` Sherman Yin [this message]
2013-12-21 2:31 ` Sherman Yin
2013-12-11 18:37 ` [PATCH v3 6/6] pinctrl: Enable pinctrl for Broadcom Capri SoCs Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-11 18:37 ` Sherman Yin
2013-12-21 2:13 ` [PATCH v4 0/6] Add Broadcom Capri pinctrl driver Sherman Yin
2013-12-21 2:13 ` Sherman Yin
2013-12-21 2:13 ` Sherman Yin
2013-12-21 2:13 ` [PATCH v4 1/4] pinctrl: Add void * to pinctrl_pin_desc Sherman Yin
2013-12-21 2:13 ` Sherman Yin
2013-12-21 2:13 ` Sherman Yin
2014-01-16 13:26 ` Linus Walleij
2014-01-16 13:26 ` Linus Walleij
2013-12-21 2:13 ` [PATCH v4 2/4] pinctrl: Add pinctrl binding for Broadcom Capri SoCs Sherman Yin
2013-12-21 2:13 ` Sherman Yin
2013-12-21 2:13 ` Sherman Yin
2014-01-07 17:15 ` Linus Walleij
2014-01-07 17:15 ` Linus Walleij
2014-01-07 20:45 ` Sherman Yin
2014-01-07 20:45 ` Sherman Yin
2014-01-14 10:16 ` Linus Walleij
2014-01-14 10:16 ` Linus Walleij
2014-01-14 19:00 ` Sherman Yin
2014-01-14 19:00 ` Sherman Yin
2014-01-15 9:40 ` Linus Walleij
2014-01-15 9:40 ` Linus Walleij
2014-01-15 16:39 ` Mark Rutland
2014-01-15 16:39 ` Mark Rutland
2014-01-16 13:24 ` Linus Walleij
2014-01-16 13:24 ` Linus Walleij
2014-01-16 13:24 ` Linus Walleij
2013-12-21 2:13 ` [PATCH v4 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver Sherman Yin
2013-12-21 2:13 ` Sherman Yin
2013-12-21 2:13 ` Sherman Yin
2014-01-16 13:19 ` Linus Walleij
2014-01-16 13:19 ` Linus Walleij
2014-01-17 19:59 ` Sherman Yin
2014-01-17 19:59 ` Sherman Yin
2014-01-18 2:56 ` Matt Porter
2014-01-18 2:56 ` Matt Porter
2014-01-18 2:56 ` Matt Porter
2014-01-20 8:16 ` Linus Walleij
2014-01-20 8:16 ` Linus Walleij
2014-01-20 19:14 ` Sherman Yin
2014-01-20 19:14 ` Sherman Yin
2014-01-21 12:35 ` Linus Walleij
2014-01-21 12:35 ` Linus Walleij
2014-01-21 13:49 ` Matt Porter
2014-01-21 13:49 ` Matt Porter
2013-12-21 2:13 ` [PATCH v4 4/4] pinctrl: Enable pinctrl for Broadcom Capri SoCs Sherman Yin
2013-12-21 2:13 ` Sherman Yin
2013-12-21 2:13 ` Sherman Yin
2014-01-16 13:28 ` Linus Walleij
2014-01-16 13:28 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52B4FD8E.1010009@broadcom.com \
--to=syin@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.