From: Eric Nelson <eric.nelson@boundarydevices.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 08/12] MX6: add mmdc configuration for MX6Q/MX6DL
Date: Tue, 29 Apr 2014 08:15:33 -0700 [thread overview]
Message-ID: <535FC215.1020704@boundarydevices.com> (raw)
In-Reply-To: <1398716258-8420-9-git-send-email-tharvey@gateworks.com>
Hi Tim,
On 04/28/2014 01:17 PM, Tim Harvey wrote:
> Add functions for configuring MMDC iomux and configuration based on
> board-specific configurations.
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
> v2:
> - split out mmdc and iomux structs into separate patch
> ---
> arch/arm/cpu/armv7/mx6/Makefile | 1 +
> arch/arm/cpu/armv7/mx6/ddr.c | 469 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 470 insertions(+)
> create mode 100644 arch/arm/cpu/armv7/mx6/ddr.c
>
> diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile
> index d7285fc..6dc9f8e 100644
> --- a/arch/arm/cpu/armv7/mx6/Makefile
> +++ b/arch/arm/cpu/armv7/mx6/Makefile
> @@ -8,4 +8,5 @@
> #
>
> obj-y := soc.o clock.o
> +obj-$(CONFIG_SPL_BUILD) += ddr.o
> obj-$(CONFIG_SECURE_BOOT) += hab.o
> diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
> new file mode 100644
> index 0000000..1536418
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/mx6/ddr.c
> @@ -0,0 +1,469 @@
> +/*
> + * Copyright (C) 2014 Gateworks Corporation
> + * Author: Tim Harvey <tharvey@gateworks.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <linux/types.h>
> +#include <asm/arch/mx6-ddr.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/io.h>
> +#include <asm/types.h>
> +
Do you think that someone will want to use SPL on i.MX6 with
support for only one of the variants?
It seems that this should be conditionally included if
i.MX6DQ is supported by the board.
> +/* Configure MX6DQ mmdc iomux */
> +void mx6dq_dram_iocfg(unsigned width,
> + const struct mx6dq_iomux_ddr_regs *ddr,
> + const struct mx6dq_iomux_grp_regs *grp)
> +{
> + volatile struct mx6dq_iomux_ddr_regs *mx6_ddr_iomux;
>
...
Ditto for i.MX6SDL:
> +/* Configure MX6SDL mmdc iomux */
> +void mx6sdl_dram_iocfg(unsigned width,
> + const struct mx6sdl_iomux_ddr_regs *ddr,
> + const struct mx6sdl_iomux_grp_regs *grp)
> +{
Regards,
Eric
next prev parent reply other threads:[~2014-04-29 15:15 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-28 20:17 [U-Boot] [PATCH 00/12] MX6: SPL NAND support Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 01/12] SPL: NAND: remove CONFIG_SYS_NAND_PAGE_SIZE Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 02/12] SPL: NAND: add support for mxs nand Tim Harvey
2014-05-02 20:56 ` Scott Wood
2014-05-06 4:08 ` Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 03/12] MX6: add common SPL configuration Tim Harvey
2014-04-29 4:14 ` Eric Nelson
2014-04-29 6:37 ` Igor Grinberg
2014-04-29 11:55 ` Tim Harvey
2014-05-05 9:05 ` Stefano Babic
2014-05-07 17:01 ` Nikita Kiryanov
2014-04-28 20:17 ` [U-Boot] [PATCH 04/12] spl: consolidate arch/arm/include/asm/arch-*/spl.h Tim Harvey
2014-04-30 5:39 ` Masahiro Yamada
2014-05-05 9:08 ` Stefano Babic
2014-04-28 20:17 ` [U-Boot] [PATCH 05/12] MX6: add boot device support for SPL Tim Harvey
2014-04-29 4:28 ` Eric Nelson
2014-05-05 9:14 ` Stefano Babic
2014-05-05 15:46 ` Tim Harvey
2014-05-05 18:30 ` Stefano Babic
2014-05-06 6:36 ` Tapani Utriainen
2014-05-06 7:55 ` Stefano Babic
2014-05-06 15:42 ` Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 06/12] IMX: add comments and remove unused struct fields Tim Harvey
2014-05-05 10:28 ` Stefano Babic
2014-04-28 20:17 ` [U-Boot] [PATCH 07/12] MX6: add structs for mmdc and ddr iomux registers Tim Harvey
2014-04-29 14:20 ` Eric Nelson
2014-05-05 10:34 ` Stefano Babic
2014-05-05 15:52 ` Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 08/12] MX6: add mmdc configuration for MX6Q/MX6DL Tim Harvey
2014-04-29 15:15 ` Eric Nelson [this message]
2014-04-29 18:19 ` Tim Harvey
2014-04-29 18:26 ` Eric Nelson
2014-04-29 18:35 ` Otavio Salvador
2014-04-28 20:17 ` [U-Boot] [PATCH 09/12] IMX: add additional function for pinmux using an array Tim Harvey
2014-04-29 15:22 ` Eric Nelson
2014-05-06 4:35 ` Tim Harvey
2014-05-07 16:59 ` Nikita Kiryanov
2014-05-08 4:11 ` Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 10/12] imx: ventana: split read_eeprom into standalone file Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 11/12] imx: ventana: auto-configure for IMX6Q vs IMX6DL Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL Tim Harvey
2014-05-06 18:18 ` Tim Harvey
2014-05-06 18:45 ` York Sun
2014-05-06 19:11 ` Jeroen Hofstee
2014-05-06 23:35 ` Tim Harvey
2014-05-07 16:14 ` York Sun
2014-05-07 18:43 ` Jeroen Hofstee
2014-05-07 20:27 ` Tim Harvey
2014-05-07 20:29 ` York Sun
2014-05-07 20:35 ` Tim Harvey
2014-05-07 20:36 ` York Sun
2014-05-07 9:29 ` Stefano Babic
2014-05-14 4:58 ` Tim Harvey
2014-05-14 5:03 ` Tim Harvey
2014-05-14 22:32 ` Tim Harvey
2014-05-15 9:20 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=535FC215.1020704@boundarydevices.com \
--to=eric.nelson@boundarydevices.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.