* Problem Building DHCP into image
@ 2014-05-22 15:22 Dr. Markus Eich
2014-05-22 15:34 ` Gary Thomas
2014-05-23 13:21 ` Iorga, Cristian
0 siblings, 2 replies; 5+ messages in thread
From: Dr. Markus Eich @ 2014-05-22 15:22 UTC (permalink / raw)
To: poky
Dear all,
I try to build a yocto image using the following receipe
http://pastebin.com/SyW3MZrL
The build config is
Build Configuration:
BB_VERSION = "1.20.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.04"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "overo"
DISTRO = "poky"
DISTRO_VERSION = "1.5.1"
TUNE_FEATURES = "armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "dora:19745990465b37107142c5464008ca9f7959cc0b"
meta-oe
meta-networking = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
meta-ros = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
meta-overo = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
meta-dfki = "master:d6156057fc7adc1585ec28505f63633e981f66d3"
The problem is building the dhcp part, i.e.
IMAGE_INSTALL += " \
dhcp\
"
using bitbake dhcp runs fine, but
bitbake my image (see pastbin) results in
| Configuring iftop.
| Collected errors:
| * opkg_install_cmd: Cannot install package dhcp.
| WARNING:
/home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1
exit 255 from
| opkg-cl ${ipkg_args} install ${package_to_install}
| ERROR: Function failed: do_rootfs (log file is located at
/home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)
ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb,
do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to
be rerun and 1 failed.
No currently running tasks (5619 of 5621)
Summary: 1 task failed:
/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Any ideas?
Cheers,
Markus
--
Dr.-Ing. Markus Eich
Senior Researcher
Marine Inspection Robotics
Space Robotics
Besuchsadresse der Nebengeschäftstelle:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 5
28359 Bremen, Germany
Postadresse der Hauptgeschäftsstelle Standort Bremen:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 1
28359 Bremen, Germany
Tel.: +49 421 178 45-4105
Zentrale: +49 421 178 45-0
Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
E-Mail: markus.eich@dfki.de
Weitere Informationen: http://www.dfki.de/robotik
-----------------------------------------------------------------------
Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
(Vorsitzender) Dr. Walter Olthoff
Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
Amtsgericht Kaiserslautern, HRB 2313
Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
USt-Id.Nr.: DE 148646973
Steuernummer: 19/673/0060/3
-----------------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem Building DHCP into image
2014-05-22 15:22 Problem Building DHCP into image Dr. Markus Eich
@ 2014-05-22 15:34 ` Gary Thomas
[not found] ` <537E1D0B.4050909@dfki.de>
2014-05-23 13:21 ` Iorga, Cristian
1 sibling, 1 reply; 5+ messages in thread
From: Gary Thomas @ 2014-05-22 15:34 UTC (permalink / raw)
To: poky
On 2014-05-22 09:22, Dr. Markus Eich wrote:
> Dear all,
>
> I try to build a yocto image using the following receipe
>
> http://pastebin.com/SyW3MZrL
>
>
> The build config is
>
>
> Build Configuration:
> BB_VERSION = "1.20.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Ubuntu-14.04"
> TARGET_SYS = "arm-poky-linux-gnueabi"
> MACHINE = "overo"
> DISTRO = "poky"
> DISTRO_VERSION = "1.5.1"
> TUNE_FEATURES = "armv7a vfp neon"
> TARGET_FPU = "vfp-neon"
> meta
> meta-yocto = "dora:19745990465b37107142c5464008ca9f7959cc0b"
> meta-oe
> meta-networking = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
> meta-ros = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
> meta-overo = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
> meta-dfki = "master:d6156057fc7adc1585ec28505f63633e981f66d3"
>
> The problem is building the dhcp part, i.e.
>
> IMAGE_INSTALL += " \
> dhcp\
> "
I think you probably want dhcp-server
>
> using bitbake dhcp runs fine, but
>
> bitbake my image (see pastbin) results in
>
>
> | Configuring iftop.
> | Collected errors:
> | * opkg_install_cmd: Cannot install package dhcp.
> | WARNING: /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1 exit 255 from
> | opkg-cl ${ipkg_args} install ${package_to_install}
> | ERROR: Function failed: do_rootfs (log file is located at /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)
> ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed.
> No currently running tasks (5619 of 5621)
>
> Summary: 1 task failed:
> /home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
> Summary: There was 1 WARNING message shown.
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>
>
> Any ideas?
>
> Cheers,
>
> Markus
>
>
>
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem Building DHCP into image
[not found] ` <537E1D0B.4050909@dfki.de>
@ 2014-05-22 16:07 ` Gary Thomas
0 siblings, 0 replies; 5+ messages in thread
From: Gary Thomas @ 2014-05-22 16:07 UTC (permalink / raw)
To: Dr. Markus Eich; +Cc: Poky Project
On 2014-05-22 09:51, Dr. Markus Eich wrote:
> Maybe I should start with what I intend to do (sorry, I am newbie in yocto)
>
> The image I have runs fine with my network connection. It only cannot get the DNS resolving working. When connect to my board, I have to use
>
> dhclient once manually. I want to do this using the systemd configuration. So I need to install the service somehow at start.
>
> Checking the dhcp_4.2.5-P1.bbappend receipe I found
>
>
> SYSTEMD_AUTO_ENABLE_dhcp-client = "disable"
>
> how can I make my receipe to start dhcp client via a systemd service?
This question surely belongs on the mailing list, where everyone can
benefit from the discussion (and someone who actually knows/likes
systemd can answer)
>
> Am 22.05.2014 17:34, schrieb Gary Thomas:
>> On 2014-05-22 09:22, Dr. Markus Eich wrote:
>>> Dear all,
>>>
>>> I try to build a yocto image using the following receipe
>>>
>>> http://pastebin.com/SyW3MZrL
>>>
>>>
>>> The build config is
>>>
>>>
>>> Build Configuration:
>>> BB_VERSION = "1.20.0"
>>> BUILD_SYS = "x86_64-linux"
>>> NATIVELSBSTRING = "Ubuntu-14.04"
>>> TARGET_SYS = "arm-poky-linux-gnueabi"
>>> MACHINE = "overo"
>>> DISTRO = "poky"
>>> DISTRO_VERSION = "1.5.1"
>>> TUNE_FEATURES = "armv7a vfp neon"
>>> TARGET_FPU = "vfp-neon"
>>> meta
>>> meta-yocto = "dora:19745990465b37107142c5464008ca9f7959cc0b"
>>> meta-oe
>>> meta-networking = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
>>> meta-ros = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
>>> meta-overo = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
>>> meta-dfki = "master:d6156057fc7adc1585ec28505f63633e981f66d3"
>>>
>>> The problem is building the dhcp part, i.e.
>>>
>>> IMAGE_INSTALL += " \
>>> dhcp\
>>> "
>>
>> I think you probably want dhcp-server
>
>>> using bitbake dhcp runs fine, but
>>>
>>> bitbake my image (see pastbin) results in
>>>
>>>
>>> | Configuring iftop.
>>> | Collected errors:
>>> | * opkg_install_cmd: Cannot install package dhcp.
>>> | WARNING: /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1 exit 255 from
>>> | opkg-cl ${ipkg_args} install ${package_to_install}
>>> | ERROR: Function failed: do_rootfs (log file is located at /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)
>>> ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs) failed with exit code '1'
>>> NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed.
>>> No currently running tasks (5619 of 5621)
>>>
>>> Summary: 1 task failed:
>>> /home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
>>> Summary: There was 1 WARNING message shown.
>>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>>>
>>>
>>> Any ideas?
>>>
>>> Cheers,
>>>
>>> Markus
>>>
>>>
>>>
>>>
>>
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem Building DHCP into image
2014-05-22 15:22 Problem Building DHCP into image Dr. Markus Eich
2014-05-22 15:34 ` Gary Thomas
@ 2014-05-23 13:21 ` Iorga, Cristian
2014-05-23 15:03 ` Dr. Markus Eich
1 sibling, 1 reply; 5+ messages in thread
From: Iorga, Cristian @ 2014-05-23 13:21 UTC (permalink / raw)
To: Dr. Markus Eich, poky@yoctoproject.org
Hello Markus,
By running:
bitbake dhcp
you actually will run the dhcp recipe and all tasks that goes into it (that will create packages, among other things).
By adding IMAGE_INSTALL, you try to add a certain package into the build.
I will recommend to use CORE_IMAGE_EXTRA_INSTALL anyhow.
Now, the dhcp recipe will build the following packages:
dhcp-server, dhcp-server-config, dhcp-client, dhcp-relay, etc.
I believe that you want to add one of this to your image (server, client, etc).
Regards,
Cristian Iorga
YP
Intel Corporation
-----Original Message-----
From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Dr. Markus Eich
Sent: Thursday, May 22, 2014 6:23 PM
To: poky@yoctoproject.org
Subject: [poky] Problem Building DHCP into image
Dear all,
I try to build a yocto image using the following receipe
http://pastebin.com/SyW3MZrL
The build config is
Build Configuration:
BB_VERSION = "1.20.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.04"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "overo"
DISTRO = "poky"
DISTRO_VERSION = "1.5.1"
TUNE_FEATURES = "armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "dora:19745990465b37107142c5464008ca9f7959cc0b"
meta-oe
meta-networking = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
meta-ros = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
meta-overo = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
meta-dfki = "master:d6156057fc7adc1585ec28505f63633e981f66d3"
The problem is building the dhcp part, i.e.
IMAGE_INSTALL += " \
dhcp\
"
using bitbake dhcp runs fine, but
bitbake my image (see pastbin) results in
| Configuring iftop.
| Collected errors:
| * opkg_install_cmd: Cannot install package dhcp.
| WARNING:
/home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1
exit 255 from
| opkg-cl ${ipkg_args} install ${package_to_install}
| ERROR: Function failed: do_rootfs (log file is located at
/home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)
ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb,
do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed.
No currently running tasks (5619 of 5621)
Summary: 1 task failed:
/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Any ideas?
Cheers,
Markus
--
Dr.-Ing. Markus Eich
Senior Researcher
Marine Inspection Robotics
Space Robotics
Besuchsadresse der Nebengeschäftstelle:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 5
28359 Bremen, Germany
Postadresse der Hauptgeschäftsstelle Standort Bremen:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 1
28359 Bremen, Germany
Tel.: +49 421 178 45-4105
Zentrale: +49 421 178 45-0
Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
E-Mail: markus.eich@dfki.de
Weitere Informationen: http://www.dfki.de/robotik
-----------------------------------------------------------------------
Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
(Vorsitzender) Dr. Walter Olthoff
Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
Amtsgericht Kaiserslautern, HRB 2313
Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
USt-Id.Nr.: DE 148646973
Steuernummer: 19/673/0060/3
-----------------------------------------------------------------------
--
_______________________________________________
poky mailing list
poky@yoctoproject.org
https://lists.yoctoproject.org/listinfo/poky
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem Building DHCP into image
2014-05-23 13:21 ` Iorga, Cristian
@ 2014-05-23 15:03 ` Dr. Markus Eich
0 siblings, 0 replies; 5+ messages in thread
From: Dr. Markus Eich @ 2014-05-23 15:03 UTC (permalink / raw)
To: Iorga, Cristian, poky@yoctoproject.org
Thank you that did the trick. I have now installed dhclient on the image.
using
INSTALL +="dhcp-client"
But I somehow cannot enable it in systemd.
on the target machine I have lots of .service scripts in
/lib/systemd/system
but all the dhcp services are missing. I have found that there is a recipe
dhcp_4.2.5-P1.bbappend
in meta-openembedded/meta-systemd/oe-core/recipes-connectivity/dhcp
which uses
do_install_append() {
install -d ${D}${systemd_unitdir}/system
install -m 0644 ${WORKDIR}/dhcpd.service ${D}${systemd_unitdir}/system
install -m 0644 ${WORKDIR}/dhclient.service
${D}${systemd_unitdir}/system
install -m 0644 ${WORKDIR}/dhcrelay.service
${D}${systemd_unitdir}/system
}
but it seems that it is not installed. How can I tell my recipe to add
the corresponding services?
Cheers,
Markus
Am 23.05.2014 15:21, schrieb Iorga, Cristian:
> Hello Markus,
>
> By running:
> bitbake dhcp
> you actually will run the dhcp recipe and all tasks that goes into it (that will create packages, among other things).
> By adding IMAGE_INSTALL, you try to add a certain package into the build.
> I will recommend to use CORE_IMAGE_EXTRA_INSTALL anyhow.
> Now, the dhcp recipe will build the following packages:
> dhcp-server, dhcp-server-config, dhcp-client, dhcp-relay, etc.
> I believe that you want to add one of this to your image (server, client, etc).
>
> Regards,
> Cristian Iorga
> YP
> Intel Corporation
>
> -----Original Message-----
> From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Dr. Markus Eich
> Sent: Thursday, May 22, 2014 6:23 PM
> To: poky@yoctoproject.org
> Subject: [poky] Problem Building DHCP into image
>
> Dear all,
>
> I try to build a yocto image using the following receipe
>
> http://pastebin.com/SyW3MZrL
>
>
> The build config is
>
>
> Build Configuration:
> BB_VERSION = "1.20.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Ubuntu-14.04"
> TARGET_SYS = "arm-poky-linux-gnueabi"
> MACHINE = "overo"
> DISTRO = "poky"
> DISTRO_VERSION = "1.5.1"
> TUNE_FEATURES = "armv7a vfp neon"
> TARGET_FPU = "vfp-neon"
> meta
> meta-yocto = "dora:19745990465b37107142c5464008ca9f7959cc0b"
> meta-oe
> meta-networking = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
> meta-ros = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
> meta-overo = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
> meta-dfki = "master:d6156057fc7adc1585ec28505f63633e981f66d3"
>
> The problem is building the dhcp part, i.e.
>
> IMAGE_INSTALL += " \
> dhcp\
> "
>
> using bitbake dhcp runs fine, but
>
> bitbake my image (see pastbin) results in
>
>
> | Configuring iftop.
> | Collected errors:
> | * opkg_install_cmd: Cannot install package dhcp.
> | WARNING:
> /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1
> exit 255 from
> | opkg-cl ${ipkg_args} install ${package_to_install}
> | ERROR: Function failed: do_rootfs (log file is located at
> /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)
> ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb,
> do_rootfs) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed.
> No currently running tasks (5619 of 5621)
>
> Summary: 1 task failed:
> /home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
> Summary: There was 1 WARNING message shown.
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>
>
> Any ideas?
>
> Cheers,
>
> Markus
>
>
>
>
> --
> Dr.-Ing. Markus Eich
>
> Senior Researcher
> Marine Inspection Robotics
> Space Robotics
>
> Besuchsadresse der Nebengeschäftstelle:
> DFKI GmbH
> Robotics Innovation Center
> Robert-Hooke-Straße 5
> 28359 Bremen, Germany
>
> Postadresse der Hauptgeschäftsstelle Standort Bremen:
> DFKI GmbH
> Robotics Innovation Center
> Robert-Hooke-Straße 1
> 28359 Bremen, Germany
>
> Tel.: +49 421 178 45-4105
> Zentrale: +49 421 178 45-0
> Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
> E-Mail: markus.eich@dfki.de
>
> Weitere Informationen: http://www.dfki.de/robotik
> -----------------------------------------------------------------------
> Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
> Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
> Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
> (Vorsitzender) Dr. Walter Olthoff
> Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
> Amtsgericht Kaiserslautern, HRB 2313
> Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
> USt-Id.Nr.: DE 148646973
> Steuernummer: 19/673/0060/3
> -----------------------------------------------------------------------
>
> --
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
--
Dr.-Ing. Markus Eich
Senior Researcher
Marine Inspection Robotics
Space Robotics
Besuchsadresse der Nebengeschäftstelle:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 5
28359 Bremen, Germany
Postadresse der Hauptgeschäftsstelle Standort Bremen:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 1
28359 Bremen, Germany
Tel.: +49 421 178 45-4105
Zentrale: +49 421 178 45-0
Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
E-Mail: markus.eich@dfki.de
Weitere Informationen: http://www.dfki.de/robotik
-----------------------------------------------------------------------
Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
(Vorsitzender) Dr. Walter Olthoff
Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
Amtsgericht Kaiserslautern, HRB 2313
Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
USt-Id.Nr.: DE 148646973
Steuernummer: 19/673/0060/3
-----------------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-05-23 15:04 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-22 15:22 Problem Building DHCP into image Dr. Markus Eich
2014-05-22 15:34 ` Gary Thomas
[not found] ` <537E1D0B.4050909@dfki.de>
2014-05-22 16:07 ` Gary Thomas
2014-05-23 13:21 ` Iorga, Cristian
2014-05-23 15:03 ` Dr. Markus Eich
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.