* Problem Building DHCP into image
@ 2014-05-22 15:22 Dr. Markus Eich
2014-05-22 15:34 ` Gary Thomas
2014-05-23 13:21 ` Iorga, Cristian
0 siblings, 2 replies; 5+ messages in thread
From: Dr. Markus Eich @ 2014-05-22 15:22 UTC (permalink / raw)
To: poky
Dear all,
I try to build a yocto image using the following receipe
http://pastebin.com/SyW3MZrL
The build config is
Build Configuration:
BB_VERSION = "1.20.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.04"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "overo"
DISTRO = "poky"
DISTRO_VERSION = "1.5.1"
TUNE_FEATURES = "armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "dora:19745990465b37107142c5464008ca9f7959cc0b"
meta-oe
meta-networking = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274"
meta-ros = "master:821427d23adb33674da76dc34d8ab6983590fcd4"
meta-overo = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58"
meta-dfki = "master:d6156057fc7adc1585ec28505f63633e981f66d3"
The problem is building the dhcp part, i.e.
IMAGE_INSTALL += " \
dhcp\
"
using bitbake dhcp runs fine, but
bitbake my image (see pastbin) results in
| Configuring iftop.
| Collected errors:
| * opkg_install_cmd: Cannot install package dhcp.
| WARNING:
/home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1
exit 255 from
| opkg-cl ${ipkg_args} install ${package_to_install}
| ERROR: Function failed: do_rootfs (log file is located at
/home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292)
ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb,
do_rootfs) failed with exit code '1'
NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to
be rerun and 1 failed.
No currently running tasks (5619 of 5621)
Summary: 1 task failed:
/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Any ideas?
Cheers,
Markus
--
Dr.-Ing. Markus Eich
Senior Researcher
Marine Inspection Robotics
Space Robotics
Besuchsadresse der Nebengeschäftstelle:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 5
28359 Bremen, Germany
Postadresse der Hauptgeschäftsstelle Standort Bremen:
DFKI GmbH
Robotics Innovation Center
Robert-Hooke-Straße 1
28359 Bremen, Germany
Tel.: +49 421 178 45-4105
Zentrale: +49 421 178 45-0
Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
E-Mail: markus.eich@dfki.de
Weitere Informationen: http://www.dfki.de/robotik
-----------------------------------------------------------------------
Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
(Vorsitzender) Dr. Walter Olthoff
Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
Amtsgericht Kaiserslautern, HRB 2313
Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
USt-Id.Nr.: DE 148646973
Steuernummer: 19/673/0060/3
-----------------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Problem Building DHCP into image 2014-05-22 15:22 Problem Building DHCP into image Dr. Markus Eich @ 2014-05-22 15:34 ` Gary Thomas [not found] ` <537E1D0B.4050909@dfki.de> 2014-05-23 13:21 ` Iorga, Cristian 1 sibling, 1 reply; 5+ messages in thread From: Gary Thomas @ 2014-05-22 15:34 UTC (permalink / raw) To: poky On 2014-05-22 09:22, Dr. Markus Eich wrote: > Dear all, > > I try to build a yocto image using the following receipe > > http://pastebin.com/SyW3MZrL > > > The build config is > > > Build Configuration: > BB_VERSION = "1.20.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "Ubuntu-14.04" > TARGET_SYS = "arm-poky-linux-gnueabi" > MACHINE = "overo" > DISTRO = "poky" > DISTRO_VERSION = "1.5.1" > TUNE_FEATURES = "armv7a vfp neon" > TARGET_FPU = "vfp-neon" > meta > meta-yocto = "dora:19745990465b37107142c5464008ca9f7959cc0b" > meta-oe > meta-networking = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274" > meta-ros = "master:821427d23adb33674da76dc34d8ab6983590fcd4" > meta-overo = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58" > meta-dfki = "master:d6156057fc7adc1585ec28505f63633e981f66d3" > > The problem is building the dhcp part, i.e. > > IMAGE_INSTALL += " \ > dhcp\ > " I think you probably want dhcp-server > > using bitbake dhcp runs fine, but > > bitbake my image (see pastbin) results in > > > | Configuring iftop. > | Collected errors: > | * opkg_install_cmd: Cannot install package dhcp. > | WARNING: /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1 exit 255 from > | opkg-cl ${ipkg_args} install ${package_to_install} > | ERROR: Function failed: do_rootfs (log file is located at /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292) > ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs) failed with exit code '1' > NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed. > No currently running tasks (5619 of 5621) > > Summary: 1 task failed: > /home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs > Summary: There was 1 WARNING message shown. > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > Any ideas? > > Cheers, > > Markus > > > > -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <537E1D0B.4050909@dfki.de>]
* Re: Problem Building DHCP into image [not found] ` <537E1D0B.4050909@dfki.de> @ 2014-05-22 16:07 ` Gary Thomas 0 siblings, 0 replies; 5+ messages in thread From: Gary Thomas @ 2014-05-22 16:07 UTC (permalink / raw) To: Dr. Markus Eich; +Cc: Poky Project On 2014-05-22 09:51, Dr. Markus Eich wrote: > Maybe I should start with what I intend to do (sorry, I am newbie in yocto) > > The image I have runs fine with my network connection. It only cannot get the DNS resolving working. When connect to my board, I have to use > > dhclient once manually. I want to do this using the systemd configuration. So I need to install the service somehow at start. > > Checking the dhcp_4.2.5-P1.bbappend receipe I found > > > SYSTEMD_AUTO_ENABLE_dhcp-client = "disable" > > how can I make my receipe to start dhcp client via a systemd service? This question surely belongs on the mailing list, where everyone can benefit from the discussion (and someone who actually knows/likes systemd can answer) > > Am 22.05.2014 17:34, schrieb Gary Thomas: >> On 2014-05-22 09:22, Dr. Markus Eich wrote: >>> Dear all, >>> >>> I try to build a yocto image using the following receipe >>> >>> http://pastebin.com/SyW3MZrL >>> >>> >>> The build config is >>> >>> >>> Build Configuration: >>> BB_VERSION = "1.20.0" >>> BUILD_SYS = "x86_64-linux" >>> NATIVELSBSTRING = "Ubuntu-14.04" >>> TARGET_SYS = "arm-poky-linux-gnueabi" >>> MACHINE = "overo" >>> DISTRO = "poky" >>> DISTRO_VERSION = "1.5.1" >>> TUNE_FEATURES = "armv7a vfp neon" >>> TARGET_FPU = "vfp-neon" >>> meta >>> meta-yocto = "dora:19745990465b37107142c5464008ca9f7959cc0b" >>> meta-oe >>> meta-networking = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274" >>> meta-ros = "master:821427d23adb33674da76dc34d8ab6983590fcd4" >>> meta-overo = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58" >>> meta-dfki = "master:d6156057fc7adc1585ec28505f63633e981f66d3" >>> >>> The problem is building the dhcp part, i.e. >>> >>> IMAGE_INSTALL += " \ >>> dhcp\ >>> " >> >> I think you probably want dhcp-server > >>> using bitbake dhcp runs fine, but >>> >>> bitbake my image (see pastbin) results in >>> >>> >>> | Configuring iftop. >>> | Collected errors: >>> | * opkg_install_cmd: Cannot install package dhcp. >>> | WARNING: /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1 exit 255 from >>> | opkg-cl ${ipkg_args} install ${package_to_install} >>> | ERROR: Function failed: do_rootfs (log file is located at /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292) >>> ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs) failed with exit code '1' >>> NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed. >>> No currently running tasks (5619 of 5621) >>> >>> Summary: 1 task failed: >>> /home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs >>> Summary: There was 1 WARNING message shown. >>> Summary: There was 1 ERROR message shown, returning a non-zero exit code. >>> >>> >>> Any ideas? >>> >>> Cheers, >>> >>> Markus >>> >>> >>> >>> >> > -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem Building DHCP into image 2014-05-22 15:22 Problem Building DHCP into image Dr. Markus Eich 2014-05-22 15:34 ` Gary Thomas @ 2014-05-23 13:21 ` Iorga, Cristian 2014-05-23 15:03 ` Dr. Markus Eich 1 sibling, 1 reply; 5+ messages in thread From: Iorga, Cristian @ 2014-05-23 13:21 UTC (permalink / raw) To: Dr. Markus Eich, poky@yoctoproject.org Hello Markus, By running: bitbake dhcp you actually will run the dhcp recipe and all tasks that goes into it (that will create packages, among other things). By adding IMAGE_INSTALL, you try to add a certain package into the build. I will recommend to use CORE_IMAGE_EXTRA_INSTALL anyhow. Now, the dhcp recipe will build the following packages: dhcp-server, dhcp-server-config, dhcp-client, dhcp-relay, etc. I believe that you want to add one of this to your image (server, client, etc). Regards, Cristian Iorga YP Intel Corporation -----Original Message----- From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Dr. Markus Eich Sent: Thursday, May 22, 2014 6:23 PM To: poky@yoctoproject.org Subject: [poky] Problem Building DHCP into image Dear all, I try to build a yocto image using the following receipe http://pastebin.com/SyW3MZrL The build config is Build Configuration: BB_VERSION = "1.20.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Ubuntu-14.04" TARGET_SYS = "arm-poky-linux-gnueabi" MACHINE = "overo" DISTRO = "poky" DISTRO_VERSION = "1.5.1" TUNE_FEATURES = "armv7a vfp neon" TARGET_FPU = "vfp-neon" meta meta-yocto = "dora:19745990465b37107142c5464008ca9f7959cc0b" meta-oe meta-networking = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274" meta-ros = "master:821427d23adb33674da76dc34d8ab6983590fcd4" meta-overo = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58" meta-dfki = "master:d6156057fc7adc1585ec28505f63633e981f66d3" The problem is building the dhcp part, i.e. IMAGE_INSTALL += " \ dhcp\ " using bitbake dhcp runs fine, but bitbake my image (see pastbin) results in | Configuring iftop. | Collected errors: | * opkg_install_cmd: Cannot install package dhcp. | WARNING: /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1 exit 255 from | opkg-cl ${ipkg_args} install ${package_to_install} | ERROR: Function failed: do_rootfs (log file is located at /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292) ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs) failed with exit code '1' NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed. No currently running tasks (5619 of 5621) Summary: 1 task failed: /home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs Summary: There was 1 WARNING message shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. Any ideas? Cheers, Markus -- Dr.-Ing. Markus Eich Senior Researcher Marine Inspection Robotics Space Robotics Besuchsadresse der Nebengeschäftstelle: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 5 28359 Bremen, Germany Postadresse der Hauptgeschäftsstelle Standort Bremen: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 1 28359 Bremen, Germany Tel.: +49 421 178 45-4105 Zentrale: +49 421 178 45-0 Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen) E-Mail: markus.eich@dfki.de Weitere Informationen: http://www.dfki.de/robotik ----------------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973 Steuernummer: 19/673/0060/3 ----------------------------------------------------------------------- -- _______________________________________________ poky mailing list poky@yoctoproject.org https://lists.yoctoproject.org/listinfo/poky ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem Building DHCP into image 2014-05-23 13:21 ` Iorga, Cristian @ 2014-05-23 15:03 ` Dr. Markus Eich 0 siblings, 0 replies; 5+ messages in thread From: Dr. Markus Eich @ 2014-05-23 15:03 UTC (permalink / raw) To: Iorga, Cristian, poky@yoctoproject.org Thank you that did the trick. I have now installed dhclient on the image. using INSTALL +="dhcp-client" But I somehow cannot enable it in systemd. on the target machine I have lots of .service scripts in /lib/systemd/system but all the dhcp services are missing. I have found that there is a recipe dhcp_4.2.5-P1.bbappend in meta-openembedded/meta-systemd/oe-core/recipes-connectivity/dhcp which uses do_install_append() { install -d ${D}${systemd_unitdir}/system install -m 0644 ${WORKDIR}/dhcpd.service ${D}${systemd_unitdir}/system install -m 0644 ${WORKDIR}/dhclient.service ${D}${systemd_unitdir}/system install -m 0644 ${WORKDIR}/dhcrelay.service ${D}${systemd_unitdir}/system } but it seems that it is not installed. How can I tell my recipe to add the corresponding services? Cheers, Markus Am 23.05.2014 15:21, schrieb Iorga, Cristian: > Hello Markus, > > By running: > bitbake dhcp > you actually will run the dhcp recipe and all tasks that goes into it (that will create packages, among other things). > By adding IMAGE_INSTALL, you try to add a certain package into the build. > I will recommend to use CORE_IMAGE_EXTRA_INSTALL anyhow. > Now, the dhcp recipe will build the following packages: > dhcp-server, dhcp-server-config, dhcp-client, dhcp-relay, etc. > I believe that you want to add one of this to your image (server, client, etc). > > Regards, > Cristian Iorga > YP > Intel Corporation > > -----Original Message----- > From: poky-bounces@yoctoproject.org [mailto:poky-bounces@yoctoproject.org] On Behalf Of Dr. Markus Eich > Sent: Thursday, May 22, 2014 6:23 PM > To: poky@yoctoproject.org > Subject: [poky] Problem Building DHCP into image > > Dear all, > > I try to build a yocto image using the following receipe > > http://pastebin.com/SyW3MZrL > > > The build config is > > > Build Configuration: > BB_VERSION = "1.20.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "Ubuntu-14.04" > TARGET_SYS = "arm-poky-linux-gnueabi" > MACHINE = "overo" > DISTRO = "poky" > DISTRO_VERSION = "1.5.1" > TUNE_FEATURES = "armv7a vfp neon" > TARGET_FPU = "vfp-neon" > meta > meta-yocto = "dora:19745990465b37107142c5464008ca9f7959cc0b" > meta-oe > meta-networking = "dora:ee173678383683e972c7d4d6f0ef5790bfa50274" > meta-ros = "master:821427d23adb33674da76dc34d8ab6983590fcd4" > meta-overo = "dora:49d78254783e7cd1da4b7695e0014d526fbb6d58" > meta-dfki = "master:d6156057fc7adc1585ec28505f63633e981f66d3" > > The problem is building the dhcp part, i.e. > > IMAGE_INSTALL += " \ > dhcp\ > " > > using bitbake dhcp runs fine, but > > bitbake my image (see pastbin) results in > > > | Configuring iftop. > | Collected errors: > | * opkg_install_cmd: Cannot install package dhcp. > | WARNING: > /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/run.do_rootfs.26292:1 > exit 255 from > | opkg-cl ${ipkg_args} install ${package_to_install} > | ERROR: Function failed: do_rootfs (log file is located at > /home/eich/overo/build/tmp/work/overo-poky-linux-gnueabi/dfki-console-image/1.0-r0/temp/log.do_rootfs.26292) > ERROR: Task 7 (/home/eich/overo/meta-dfki/images/dfki-console-image.bb, > do_rootfs) failed with exit code '1' > NOTE: Tasks Summary: Attempted 5620 tasks of which 5619 didn't need to be rerun and 1 failed. > No currently running tasks (5619 of 5621) > > Summary: 1 task failed: > /home/eich/overo/meta-dfki/images/dfki-console-image.bb, do_rootfs > Summary: There was 1 WARNING message shown. > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > Any ideas? > > Cheers, > > Markus > > > > > -- > Dr.-Ing. Markus Eich > > Senior Researcher > Marine Inspection Robotics > Space Robotics > > Besuchsadresse der Nebengeschäftstelle: > DFKI GmbH > Robotics Innovation Center > Robert-Hooke-Straße 5 > 28359 Bremen, Germany > > Postadresse der Hauptgeschäftsstelle Standort Bremen: > DFKI GmbH > Robotics Innovation Center > Robert-Hooke-Straße 1 > 28359 Bremen, Germany > > Tel.: +49 421 178 45-4105 > Zentrale: +49 421 178 45-0 > Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen) > E-Mail: markus.eich@dfki.de > > Weitere Informationen: http://www.dfki.de/robotik > ----------------------------------------------------------------------- > Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH > Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern > Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster > (Vorsitzender) Dr. Walter Olthoff > Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes > Amtsgericht Kaiserslautern, HRB 2313 > Sitz der Gesellschaft: Kaiserslautern (HRB 2313) > USt-Id.Nr.: DE 148646973 > Steuernummer: 19/673/0060/3 > ----------------------------------------------------------------------- > > -- > _______________________________________________ > poky mailing list > poky@yoctoproject.org > https://lists.yoctoproject.org/listinfo/poky -- Dr.-Ing. Markus Eich Senior Researcher Marine Inspection Robotics Space Robotics Besuchsadresse der Nebengeschäftstelle: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 5 28359 Bremen, Germany Postadresse der Hauptgeschäftsstelle Standort Bremen: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 1 28359 Bremen, Germany Tel.: +49 421 178 45-4105 Zentrale: +49 421 178 45-0 Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen) E-Mail: markus.eich@dfki.de Weitere Informationen: http://www.dfki.de/robotik ----------------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973 Steuernummer: 19/673/0060/3 ----------------------------------------------------------------------- ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-05-23 15:04 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-22 15:22 Problem Building DHCP into image Dr. Markus Eich
2014-05-22 15:34 ` Gary Thomas
[not found] ` <537E1D0B.4050909@dfki.de>
2014-05-22 16:07 ` Gary Thomas
2014-05-23 13:21 ` Iorga, Cristian
2014-05-23 15:03 ` Dr. Markus Eich
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.