From: "Andreas Färber" <afaerber@suse.de>
To: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Stephan van Schaik <stephan@synkhronix.com>,
Vincent Palatin <vpalatin@chromium.org>,
Doug Anderson <dianders@chromium.org>,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: Re: [PATCH v4 0/4] ARM: dts: exynos: Prepare Spring
Date: Thu, 31 Jul 2014 18:21:51 +0200 [thread overview]
Message-ID: <53DA6D1F.3040102@suse.de> (raw)
In-Reply-To: <1406822910-6255-1-git-send-email-afaerber@suse.de>
[-- Attachment #1: Type: text/plain, Size: 515 bytes --]
Am 31.07.2014 18:08, schrieb Andreas Färber:
> Hello,
>
> Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15
> based attempts by Stephan and me that broke for 3.16, I've prepared a
> device tree for the HP Chromebook 11 aka Google Spring.
>
> v4 fixes a pinctrl bug.
Once again, resulting Snow vs. Spring diff attached for convenience.
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
[-- Attachment #2: spring-snow.v4.diff --]
[-- Type: text/x-patch, Size: 17117 bytes --]
--- arch/arm/boot/dts/exynos5250-snow.dts 2014-07-31 18:10:49.680004102 +0200
+++ arch/arm/boot/dts/exynos5250-spring.dts 2014-07-31 18:10:51.100004102 +0200
@@ -1,12 +1,13 @@
/*
- * Google Snow board device tree source
+ * Google Spring board device tree source
*
- * Copyright (c) 2012 Google, Inc
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
@@ -14,26 +15,21 @@
#include "exynos5250.dtsi"
/ {
- model = "Google Snow";
- compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
-
- aliases {
- i2c104 = &i2c_104;
- };
+ model = "Google Spring";
+ compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
memory {
reg = <0x40000000 0x80000000>;
};
chosen {
- };
-
- rtc@101E0000 {
- status = "okay";
+ bootargs = "console=tty1";
};
gpio-keys {
compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq>, <&lid_irq>;
power {
label = "Power";
@@ -52,145 +48,12 @@
};
};
- vbat: vbat-fixed-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vbat-supply";
- regulator-boot-on;
- };
-
- i2c-arbitrator {
- compatible = "i2c-arb-gpio-challenge";
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c-parent = <&{/i2c@12CA0000}>;
-
- our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
- their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
- slew-delay-us = <10>;
- wait-retry-us = <3000>;
- wait-free-us = <50000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
- /* Use ID 104 as a hint that we're on physical bus 4 */
- i2c_104: i2c@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- battery: sbs-battery@b {
- compatible = "sbs,sbs-battery";
- reg = <0xb>;
- sbs,poll-retry-count = <1>;
- };
-
- cros_ec: embedded-controller {
- compatible = "google,cros-ec-i2c";
- reg = <0x1e>;
- interrupts = <6 0>;
- interrupt-parent = <&gpx1>;
- pinctrl-names = "default";
- pinctrl-0 = <&ec_irq>;
- wakeup-source;
- };
-
- power-regulator {
- compatible = "ti,tps65090";
- reg = <0x48>;
-
- /*
- * Config irq to disable internal pulls
- * even though we run in polling mode.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&tps65090_irq>;
-
- vsys1-supply = <&vbat>;
- vsys2-supply = <&vbat>;
- vsys3-supply = <&vbat>;
- infet1-supply = <&vbat>;
- infet2-supply = <&vbat>;
- infet3-supply = <&vbat>;
- infet4-supply = <&vbat>;
- infet5-supply = <&vbat>;
- infet6-supply = <&vbat>;
- infet7-supply = <&vbat>;
- vsys-l1-supply = <&vbat>;
- vsys-l2-supply = <&vbat>;
-
- regulators {
- dcdc1 {
- ti,enable-ext-control;
- };
- dcdc2 {
- ti,enable-ext-control;
- };
- dcdc3 {
- ti,enable-ext-control;
- };
- fet1 {
- regulator-name = "vcd_led";
- ti,overcurrent-wait = <3>;
- };
- tps65090_fet2: fet2 {
- regulator-name = "video_mid";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet3 {
- regulator-name = "wwan_r";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet4 {
- regulator-name = "sdcard";
- ti,overcurrent-wait = <3>;
- };
- fet5 {
- regulator-name = "camout";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet6 {
- regulator-name = "lcd_vdd";
- ti,overcurrent-wait = <3>;
- };
- tps65090_fet7: fet7 {
- regulator-name = "video_mid_1a";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- ldo1 {
- };
- ldo2 {
- };
- };
-
- charger {
- compatible = "ti,tps65090-charger";
- };
- };
- };
- };
-
- sound {
- compatible = "google,snow-audio-max98095";
-
- samsung,model = "Snow-I2S-MAX98095";
- samsung,i2s-controller = <&i2s0>;
- samsung,audio-codec = <&max98095>;
- };
-
usb3_vbus_reg: regulator-usb3 {
compatible = "regulator-fixed";
regulator-name = "P5.0V_USB3CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_en>;
+ gpio = <&gpe1 0 GPIO_ACTIVE_LOW>;
enable-active-high;
};
@@ -198,6 +61,11 @@
samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
};
+ usb-hub {
+ compatible = "smsc,usb3503a";
+ reset-gpios = <&hsic_reset>;
+ };
+
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -211,19 +79,10 @@
pinctrl-0 = <&hdmi_hpd_irq>;
phy = <&hdmiphy>;
ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
- brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
- default-brightness-level = <7>;
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
+ hdmi-en-supply = <&s5m_ldo8_reg>;
+ vdd-supply = <&s5m_ldo8_reg>;
+ vdd_osc-supply = <&s5m_ldo10_reg>;
+ vdd_pll-supply = <&s5m_ldo8_reg>;
};
fimd@14400000 {
@@ -240,172 +99,241 @@
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
-
- display-timings {
- native-mode = <&timing1>;
-
- timing1: timing@1 {
- clock-frequency = <70589280>;
- hactive = <1366>;
- vactive = <768>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <32>;
- vback-porch = <10>;
- vfront-porch = <12>;
- vsync-len = <6>;
- };
- };
+ samsung,lane-count = <1>;
+ samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
};
};
+&dp_hpd {
+ samsung,pins = "gpc3-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- max77686@09 {
- compatible = "maxim,max77686";
+ s5m8767-pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
interrupt-parent = <&gpx3>;
interrupts = <2 0>;
pinctrl-names = "default";
- pinctrl-0 = <&max77686_irq>;
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
wakeup-source;
- reg = <0x09>;
- #clock-cells = <1>;
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+ <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+ <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+ <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+ <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+ /*
+ * The following arrays of DVS voltages are not used, since we are
+ * not using GPIOs to control PMIC bucks, but they must be defined
+ * to please the driver.
+ */
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap",
+ "en32khz_cp",
+ "en32khz_bt";
+ };
+
+ regulators {
+ s5m_ldo4_reg: LDO4 {
+ regulator-name = "P1.0V_LDO_OUT4";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ op_mode = <0>;
};
- ldo2_reg: LDO2 {
- regulator-name = "P1.8V_LDO_OUT2";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ s5m_ldo5_reg: LDO5 {
+ regulator-name = "P1.0V_LDO_OUT5";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
+ op_mode = <0>;
};
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ s5m_ldo6_reg: LDO6 {
+ regulator-name = "vdd_mydp";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo7_reg: LDO7 {
+ s5m_ldo7_reg: LDO7 {
regulator-name = "P1.1V_LDO_OUT7";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo8_reg: LDO8 {
+ s5m_ldo8_reg: LDO8 {
regulator-name = "P1.0V_LDO_OUT8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo10_reg: LDO10 {
+ s5m_ldo10_reg: LDO10 {
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo12_reg: LDO12 {
+ s5m_ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ s5m_ldo12_reg: LDO12 {
regulator-name = "P3.0V_LDO_OUT12";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
+ op_mode = <3>;
+ };
+
+ s5m_ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
};
- ldo14_reg: LDO14 {
+ s5m_ldo14_reg: LDO14 {
regulator-name = "P1.8V_LDO_OUT14";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo15_reg: LDO15 {
+ s5m_ldo15_reg: LDO15 {
regulator-name = "P1.0V_LDO_OUT15";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo16_reg: LDO16 {
+ s5m_ldo16_reg: LDO16 {
regulator-name = "P1.8V_LDO_OUT16";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ op_mode = <3>;
+ };
+
+ s5m_ldo17_reg: LDO17 {
+ regulator-name = "P2.8V_LDO_OUT17";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ s5m_ldo25_reg: LDO25 {
+ regulator-name = "vdd_bridge";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>;
};
- buck1_reg: BUCK1 {
+ BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
+ op_mode = <3>;
};
- buck2_reg: BUCK2 {
+ BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
+ op_mode = <3>;
};
- buck3_reg: BUCK3 {
+ BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
+ op_mode = <3>;
};
- buck4_reg: BUCK4 {
+ BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
- regulator-always-on;
regulator-boot-on;
+ op_mode = <3>;
};
- buck5_reg: BUCK5 {
+ BUCK5 {
regulator-name = "P1.8V_BUCK_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
+ op_mode = <1>;
};
- buck6_reg: BUCK6 {
- regulator-name = "P1.35V_BUCK_OUT6";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "P2.0V_BUCK_OUT7";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
+ BUCK6 {
+ regulator-name = "P1.2V_BUCK_OUT6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-always-on;
+ regulator-boot-on;
+ op_mode = <0>;
};
- buck8_reg: BUCK8 {
- regulator-name = "P2.85V_BUCK_OUT8";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
+ BUCK9 {
+ regulator-name = "vdd_ummc";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <3000000>;
regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
};
};
};
@@ -415,14 +343,6 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
-
- trackpad {
- reg = <0x67>;
- compatible = "cypress,cyapa";
- interrupts = <2 0>;
- interrupt-parent = <&gpx1>;
- wakeup-source;
- };
};
/*
@@ -454,6 +374,16 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+
+ cros_ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 0>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ };
};
&i2c_5 {
@@ -466,13 +396,6 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
-
- max98095: codec@11 {
- compatible = "maxim,max98095";
- reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
- pinctrl-names = "default";
- };
};
&i2c_8 {
@@ -508,29 +431,7 @@
};
};
-&mmc_2 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
- };
-};
-
-/*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
-&mmc_3 {
+&mmc_1 {
status = "okay";
num-slots = <1>;
supports-highspeed;
@@ -540,7 +441,7 @@
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
slot@0 {
reg = <0>;
@@ -549,8 +450,15 @@
};
&pinctrl_0 {
- max77686_irq: max77686-irq {
- samsung,pins = "gpx3-2";
+ s5m8767_dvs: s5m8767-dvs {
+ samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
@@ -563,23 +471,23 @@
samsung,pin-drv = <0>;
};
- max98095_en: max98095-en {
- samsung,pins = "gpx1-7";
+ s5m8767_ds: s5m8767-ds {
+ samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
+ samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
@@ -593,31 +501,28 @@
};
&pinctrl_1 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
+ hsic_reset: hsic-reset {
+ samsung,pins = "gpe1-0";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
-&sd3_clk {
+&sd1_clk {
samsung,pin-drv = <0>;
};
-&sd3_cmd {
+&sd1_cmd {
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
-&sd3_bus4 {
+&sd1_cd {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_bus4 {
samsung,pin-drv = <0>;
};
WARNING: multiple messages have this Message-ID (diff)
From: afaerber@suse.de (Andreas Färber)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/4] ARM: dts: exynos: Prepare Spring
Date: Thu, 31 Jul 2014 18:21:51 +0200 [thread overview]
Message-ID: <53DA6D1F.3040102@suse.de> (raw)
In-Reply-To: <1406822910-6255-1-git-send-email-afaerber@suse.de>
Am 31.07.2014 18:08, schrieb Andreas F?rber:
> Hello,
>
> Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15
> based attempts by Stephan and me that broke for 3.16, I've prepared a
> device tree for the HP Chromebook 11 aka Google Spring.
>
> v4 fixes a pinctrl bug.
Once again, resulting Snow vs. Spring diff attached for convenience.
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
-------------- next part --------------
A non-text attachment was scrubbed...
Name: spring-snow.v4.diff
Type: text/x-patch
Size: 17117 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140731/5522a095/attachment.bin>
next prev parent reply other threads:[~2014-07-31 16:21 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-31 16:08 [PATCH v4 0/4] ARM: dts: exynos: Prepare Spring Andreas Färber
2014-07-31 16:08 ` Andreas Färber
2014-07-31 16:08 ` [PATCH v4 1/4] ARM: dts: Fix MMC pinctrl for exynos5250-snow Andreas Färber
2014-07-31 16:08 ` Andreas Färber
2014-07-31 16:08 ` Andreas Färber
2014-07-31 18:41 ` Kukjin Kim
2014-07-31 18:41 ` Kukjin Kim
2014-07-31 19:20 ` Tomasz Figa
2014-07-31 19:20 ` Tomasz Figa
2014-07-31 16:08 ` [PATCH v4 2/4] ARM: dts: Fold exynos5250-cros-common into exynos5250-snow Andreas Färber
2014-07-31 16:08 ` Andreas Färber
2014-07-31 16:08 ` Andreas Färber
2014-07-31 19:22 ` Tomasz Figa
2014-07-31 19:22 ` Tomasz Figa
2014-07-31 16:08 ` [PATCH v4 3/4] ARM: dts: Clean up exynos5250-snow Andreas Färber
2014-07-31 16:08 ` Andreas Färber
2014-07-31 16:08 ` Andreas Färber
2014-07-31 19:19 ` Tomasz Figa
2014-07-31 19:19 ` Tomasz Figa
2014-07-31 19:21 ` Andreas Färber
2014-07-31 19:21 ` Andreas Färber
2014-07-31 16:08 ` [PATCH v4 4/4] ARM: dts: Add exynos5250-spring device tree Andreas Färber
2014-07-31 16:08 ` Andreas Färber
2014-07-31 16:08 ` Andreas Färber
2014-07-31 17:00 ` Vincent Palatin
2014-07-31 17:00 ` Vincent Palatin
2014-07-31 17:14 ` Andreas Färber
2014-07-31 17:14 ` Andreas Färber
2014-07-31 17:38 ` Andreas Färber
2014-07-31 17:38 ` Andreas Färber
2014-07-31 18:51 ` Vincent Palatin
2014-07-31 18:51 ` Vincent Palatin
[not found] ` <1406822910-6255-5-git-send-email-afaerber-l3A5Bk7waGM@public.gmane.org>
2014-07-31 19:05 ` Tomasz Figa
2014-07-31 19:05 ` Tomasz Figa
2014-07-31 19:05 ` Tomasz Figa
2014-07-31 19:20 ` Andreas Färber
2014-07-31 19:20 ` Andreas Färber
2014-07-31 19:40 ` Tomasz Figa
2014-07-31 19:40 ` Tomasz Figa
2014-07-31 23:17 ` Andreas Färber
2014-07-31 23:17 ` Andreas Färber
[not found] ` <53DACE73.8080009-l3A5Bk7waGM@public.gmane.org>
2014-07-31 23:26 ` Tomasz Figa
2014-07-31 23:26 ` Tomasz Figa
2014-07-31 23:26 ` Tomasz Figa
2014-07-31 23:31 ` Andreas Färber
2014-07-31 23:31 ` Andreas Färber
2014-08-02 5:15 ` Doug Anderson
2014-08-02 5:15 ` Doug Anderson
2014-08-02 7:49 ` Andreas Färber
2014-08-02 7:49 ` Andreas Färber
2014-07-31 20:36 ` Andreas Färber
2014-07-31 20:36 ` Andreas Färber
2014-07-31 21:09 ` Tomasz Figa
2014-07-31 21:09 ` Tomasz Figa
2014-08-01 3:17 ` Andreas Färber
2014-08-01 3:17 ` Andreas Färber
2014-08-02 12:40 ` Tomasz Figa
2014-08-02 12:40 ` Tomasz Figa
2014-07-31 16:21 ` Andreas Färber [this message]
2014-07-31 16:21 ` [PATCH v4 0/4] ARM: dts: exynos: Prepare Spring Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53DA6D1F.3040102@suse.de \
--to=afaerber@suse.de \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=javier.martinez@collabora.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=stephan@synkhronix.com \
--cc=vpalatin@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.