* [ath9k-devel] Enabling 4.9 GHz @ 2014-08-01 8:57 Pannirselvam Kanagaratnam 2014-08-02 15:15 ` abhinav narain 2014-08-02 22:18 ` Adrian Chadd 0 siblings, 2 replies; 11+ messages in thread From: Pannirselvam Kanagaratnam @ 2014-08-01 8:57 UTC (permalink / raw) To: ath9k-devel Hello, I would like to know how to enable 4.9 GHz on ath9k. The module I am using is based on AR9590. Regards, Pannir ^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Enabling 4.9 GHz 2014-08-01 8:57 [ath9k-devel] Enabling 4.9 GHz Pannirselvam Kanagaratnam @ 2014-08-02 15:15 ` abhinav narain 2014-08-02 15:18 ` Pannirselvam Kanagaratnam 2014-08-02 22:18 ` Adrian Chadd 1 sibling, 1 reply; 11+ messages in thread From: abhinav narain @ 2014-08-02 15:15 UTC (permalink / raw) To: ath9k-devel Whats the purpose of this ? It is illegal to use that frequency I think :-) - Abhinav On Fri, Aug 1, 2014 at 4:57 AM, Pannirselvam Kanagaratnam <pannir@xsmail.com > wrote: > Hello, > > I would like to know how to enable 4.9 GHz on ath9k. The module I am > using is based on AR9590. > > Regards, > > Pannir > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140802/38780f48/attachment.htm ^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Enabling 4.9 GHz 2014-08-02 15:15 ` abhinav narain @ 2014-08-02 15:18 ` Pannirselvam Kanagaratnam 2014-08-02 15:37 ` abhinav narain 0 siblings, 1 reply; 11+ messages in thread From: Pannirselvam Kanagaratnam @ 2014-08-02 15:18 UTC (permalink / raw) To: ath9k-devel An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140802/a851ae03/attachment.htm ^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Enabling 4.9 GHz 2014-08-02 15:18 ` Pannirselvam Kanagaratnam @ 2014-08-02 15:37 ` abhinav narain 2014-08-02 22:45 ` Pannirselvam Kanagaratnam 0 siblings, 1 reply; 11+ messages in thread From: abhinav narain @ 2014-08-02 15:37 UTC (permalink / raw) To: ath9k-devel Please elaborate. On Sat, Aug 2, 2014 at 11:18 AM, Pannirselvam Kanagaratnam < pannir@xsmail.com> wrote: > Not for Public Safety applications. > > > On 02/08/2014 11:15 PM, abhinav narain wrote: > > Whats the purpose of this ? It is illegal to use that frequency I think > :-) > > - > Abhinav > > > On Fri, Aug 1, 2014 at 4:57 AM, Pannirselvam Kanagaratnam < > pannir at xsmail.com> wrote: > >> Hello, >> >> I would like to know how to enable 4.9 GHz on ath9k. The module I am >> using is based on AR9590. >> >> Regards, >> >> Pannir >> _______________________________________________ >> ath9k-devel mailing list >> ath9k-devel at lists.ath9k.org >> https://lists.ath9k.org/mailman/listinfo/ath9k-devel >> > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140802/8c9223e5/attachment.htm ^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Enabling 4.9 GHz 2014-08-02 15:37 ` abhinav narain @ 2014-08-02 22:45 ` Pannirselvam Kanagaratnam 0 siblings, 0 replies; 11+ messages in thread From: Pannirselvam Kanagaratnam @ 2014-08-02 22:45 UTC (permalink / raw) To: ath9k-devel An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140803/1563d871/attachment.htm ^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Enabling 4.9 GHz 2014-08-01 8:57 [ath9k-devel] Enabling 4.9 GHz Pannirselvam Kanagaratnam 2014-08-02 15:15 ` abhinav narain @ 2014-08-02 22:18 ` Adrian Chadd 2014-08-02 23:05 ` Pannirselvam Kanagaratnam 2014-08-06 9:54 ` Pannirselvam Kanagaratnam 1 sibling, 2 replies; 11+ messages in thread From: Adrian Chadd @ 2014-08-02 22:18 UTC (permalink / raw) To: ath9k-devel hi! I think you'll have to hack up a custom regulatory domain database that includes the frequencies your device is licenced to work on. The things that need to happen: * regdb support, or the driver/802.11 layer won't let you do anything; * make sure your AR9590 has the "I'm allowed to do 4.9GHz!" bit in the OTP EEPROM set, or the NIC may not let you; * then make sure the AR9590 has calibration data for the 4.9GHz channel(s), or things won't work very well. -a On 1 August 2014 01:57, Pannirselvam Kanagaratnam <pannir@xsmail.com> wrote: > Hello, > > I would like to know how to enable 4.9 GHz on ath9k. The module I am > using is based on AR9590. > > Regards, > > Pannir > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Enabling 4.9 GHz 2014-08-02 22:18 ` Adrian Chadd @ 2014-08-02 23:05 ` Pannirselvam Kanagaratnam 2014-08-03 16:31 ` abhinav narain 2014-08-06 9:54 ` Pannirselvam Kanagaratnam 1 sibling, 1 reply; 11+ messages in thread From: Pannirselvam Kanagaratnam @ 2014-08-02 23:05 UTC (permalink / raw) To: ath9k-devel Thanks Adrian. 2 & 3 are done. Will look into regdb. Regards, Pannir On 03/08/2014 6:18 AM, Adrian Chadd wrote: > hi! > > I think you'll have to hack up a custom regulatory domain database > that includes the frequencies your device is licenced to work on. > > The things that need to happen: > > * regdb support, or the driver/802.11 layer won't let you do anything; > * make sure your AR9590 has the "I'm allowed to do 4.9GHz!" bit in the > OTP EEPROM set, or the NIC may not let you; > * then make sure the AR9590 has calibration data for the 4.9GHz > channel(s), or things won't work very well. > > > -a > > > On 1 August 2014 01:57, Pannirselvam Kanagaratnam <pannir@xsmail.com> wrote: >> Hello, >> >> I would like to know how to enable 4.9 GHz on ath9k. The module I am >> using is based on AR9590. >> >> Regards, >> >> Pannir >> _______________________________________________ >> ath9k-devel mailing list >> ath9k-devel at lists.ath9k.org >> https://lists.ath9k.org/mailman/listinfo/ath9k-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Enabling 4.9 GHz 2014-08-02 23:05 ` Pannirselvam Kanagaratnam @ 2014-08-03 16:31 ` abhinav narain 2014-08-06 10:13 ` Pannirselvam Kanagaratnam 0 siblings, 1 reply; 11+ messages in thread From: abhinav narain @ 2014-08-03 16:31 UTC (permalink / raw) To: ath9k-devel This link has the patches and processing scripts. http://wiki.spench.net/wiki/RADAR Thanks, Abhinav On Sat, Aug 2, 2014 at 4:05 PM, Pannirselvam Kanagaratnam <pannir@xsmail.com > wrote: > Thanks Adrian. 2 & 3 are done. Will look into regdb. > > Regards, > > Pannir > > On 03/08/2014 6:18 AM, Adrian Chadd wrote: > > hi! > > > > I think you'll have to hack up a custom regulatory domain database > > that includes the frequencies your device is licenced to work on. > > > > The things that need to happen: > > > > * regdb support, or the driver/802.11 layer won't let you do anything; > > * make sure your AR9590 has the "I'm allowed to do 4.9GHz!" bit in the > > OTP EEPROM set, or the NIC may not let you; > > * then make sure the AR9590 has calibration data for the 4.9GHz > > channel(s), or things won't work very well. > > > > > > -a > > > > > > On 1 August 2014 01:57, Pannirselvam Kanagaratnam <pannir@xsmail.com> > wrote: > >> Hello, > >> > >> I would like to know how to enable 4.9 GHz on ath9k. The module I am > >> using is based on AR9590. > >> > >> Regards, > >> > >> Pannir > >> _______________________________________________ > >> ath9k-devel mailing list > >> ath9k-devel at lists.ath9k.org > >> https://lists.ath9k.org/mailman/listinfo/ath9k-devel > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140803/680cd805/attachment.htm ^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Enabling 4.9 GHz 2014-08-03 16:31 ` abhinav narain @ 2014-08-06 10:13 ` Pannirselvam Kanagaratnam 2014-08-06 16:14 ` abhinav narain 0 siblings, 1 reply; 11+ messages in thread From: Pannirselvam Kanagaratnam @ 2014-08-06 10:13 UTC (permalink / raw) To: ath9k-devel An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140806/5a66c14f/attachment.htm ^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Enabling 4.9 GHz 2014-08-06 10:13 ` Pannirselvam Kanagaratnam @ 2014-08-06 16:14 ` abhinav narain 0 siblings, 0 replies; 11+ messages in thread From: abhinav narain @ 2014-08-06 16:14 UTC (permalink / raw) To: ath9k-devel Pannir - It is ath5k driver code, but possibly a good starting point if you want to do similar mods in ath9k ! (I assume atleast the configuration parts of the driver are similar, although ath9k is way different in packet processing etc) HTH, Abhinav On Wed, Aug 6, 2014 at 6:13 AM, Pannirselvam Kanagaratnam <pannir@xsmail.com > wrote: > Abhinav, > > Is this applicable for ath9k? > > Regards, > > Pannir > > > On 04/08/2014 12:31 AM, abhinav narain wrote: > > This link has the patches and processing scripts. > http://wiki.spench.net/wiki/RADAR > > Thanks, > Abhinav > > > On Sat, Aug 2, 2014 at 4:05 PM, Pannirselvam Kanagaratnam < > pannir at xsmail.com> wrote: > >> Thanks Adrian. 2 & 3 are done. Will look into regdb. >> >> Regards, >> >> Pannir >> >> On 03/08/2014 6:18 AM, Adrian Chadd wrote: >> > hi! >> > >> > I think you'll have to hack up a custom regulatory domain database >> > that includes the frequencies your device is licenced to work on. >> > >> > The things that need to happen: >> > >> > * regdb support, or the driver/802.11 layer won't let you do anything; >> > * make sure your AR9590 has the "I'm allowed to do 4.9GHz!" bit in the >> > OTP EEPROM set, or the NIC may not let you; >> > * then make sure the AR9590 has calibration data for the 4.9GHz >> > channel(s), or things won't work very well. >> > >> > >> > -a >> > >> > >> > On 1 August 2014 01:57, Pannirselvam Kanagaratnam <pannir@xsmail.com> >> wrote: >> >> Hello, >> >> >> >> I would like to know how to enable 4.9 GHz on ath9k. The module I am >> >> using is based on AR9590. >> >> >> >> Regards, >> >> >> >> Pannir >> >> _______________________________________________ >> >> ath9k-devel mailing list >> >> ath9k-devel at lists.ath9k.org >> >> https://lists.ath9k.org/mailman/listinfo/ath9k-devel >> >> _______________________________________________ >> ath9k-devel mailing list >> ath9k-devel at lists.ath9k.org >> https://lists.ath9k.org/mailman/listinfo/ath9k-devel >> > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140806/1333c0a0/attachment.htm ^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Enabling 4.9 GHz 2014-08-02 22:18 ` Adrian Chadd 2014-08-02 23:05 ` Pannirselvam Kanagaratnam @ 2014-08-06 9:54 ` Pannirselvam Kanagaratnam 1 sibling, 0 replies; 11+ messages in thread From: Pannirselvam Kanagaratnam @ 2014-08-06 9:54 UTC (permalink / raw) To: ath9k-devel Adrian, I got the db.txt modified. root at p1023:/usr/sbin# iw reg get country US: (2402 - 2472 @ 40), (30, 0) (4940 - 4990 @ 20), (20, 0) (5170 - 5250 @ 80), (20, 0) (5250 - 5330 @ 80), (23, 0) (5735 - 5835 @ 80), (30, 0) However, I am unable to set the frequency for 4950 MHz. root at p1023:/usr/sbin# iw dev wlan0 set freq 5180 root at p1023:/usr/sbin# iw dev wlan0 set freq 4950 command failed: Invalid argument (-22) Anything else I need to do? Regards, Pannir On 03/08/2014 6:18 AM, Adrian Chadd wrote: > hi! > > I think you'll have to hack up a custom regulatory domain database > that includes the frequencies your device is licenced to work on. > > The things that need to happen: > > * regdb support, or the driver/802.11 layer won't let you do anything; > * make sure your AR9590 has the "I'm allowed to do 4.9GHz!" bit in the > OTP EEPROM set, or the NIC may not let you; > * then make sure the AR9590 has calibration data for the 4.9GHz > channel(s), or things won't work very well. > > > -a > > > On 1 August 2014 01:57, Pannirselvam Kanagaratnam <pannir@xsmail.com> wrote: >> Hello, >> >> I would like to know how to enable 4.9 GHz on ath9k. The module I am >> using is based on AR9590. >> >> Regards, >> >> Pannir >> _______________________________________________ >> ath9k-devel mailing list >> ath9k-devel at lists.ath9k.org >> https://lists.ath9k.org/mailman/listinfo/ath9k-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2014-08-06 16:14 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-08-01 8:57 [ath9k-devel] Enabling 4.9 GHz Pannirselvam Kanagaratnam 2014-08-02 15:15 ` abhinav narain 2014-08-02 15:18 ` Pannirselvam Kanagaratnam 2014-08-02 15:37 ` abhinav narain 2014-08-02 22:45 ` Pannirselvam Kanagaratnam 2014-08-02 22:18 ` Adrian Chadd 2014-08-02 23:05 ` Pannirselvam Kanagaratnam 2014-08-03 16:31 ` abhinav narain 2014-08-06 10:13 ` Pannirselvam Kanagaratnam 2014-08-06 16:14 ` abhinav narain 2014-08-06 9:54 ` Pannirselvam Kanagaratnam
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.