From: zhangfei <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Zhangfei Gao
<zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
haifeng.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
jchxue-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Wei Yan <sledge.yanwei-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Subject: Re: [PATCH v2 2/3] i2c: hix5hd2: add i2c controller driver
Date: Mon, 29 Sep 2014 20:49:22 +0800 [thread overview]
Message-ID: <54295552.2020501@linaro.org> (raw)
In-Reply-To: <1411878129-19743-3-git-send-email-zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On 09/28/2014 12:22 PM, Zhangfei Gao wrote:
> From: Wei Yan <sledge.yanwei-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
>
> I2C drivers for hix5hd2 soc series, including following chipset
> Hi3716CV200, Hi3719CV100, Hi3718CV100, Hi3719MV100, Hi3718MV100.
>
> Signed-off-by: Wei Yan <sledge.yanwei-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> drivers/i2c/busses/Kconfig | 10 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-hix5hd2.c | 554 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 565 insertions(+)
> create mode 100644 drivers/i2c/busses/i2c-hix5hd2.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 2ac87fa..ba0f43c 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -77,6 +77,16 @@ config I2C_AMD8111
> This driver can also be built as a module. If so, the module
> will be called i2c-amd8111.
>
> +config I2C_HIX5HD2
> + tristate "Hix5hd2 high-speed I2C driver"
> + depends on ARCH_HIX5HD2
Would like to remove the dependence in next version to enable compile-test.
The commit 4c255791ffd6410f ("asm-generic: io: implement relaxed
accessor macros as conditional wrappers") adds wrappers to asm-generic
of {read,write}{b,w,l,q}_relaxed.
Thanks
WARNING: multiple messages have this Message-ID (diff)
From: zhangfei.gao@linaro.org (zhangfei)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] i2c: hix5hd2: add i2c controller driver
Date: Mon, 29 Sep 2014 20:49:22 +0800 [thread overview]
Message-ID: <54295552.2020501@linaro.org> (raw)
In-Reply-To: <1411878129-19743-3-git-send-email-zhangfei.gao@linaro.org>
On 09/28/2014 12:22 PM, Zhangfei Gao wrote:
> From: Wei Yan <sledge.yanwei@huawei.com>
>
> I2C drivers for hix5hd2 soc series, including following chipset
> Hi3716CV200, Hi3719CV100, Hi3718CV100, Hi3719MV100, Hi3718MV100.
>
> Signed-off-by: Wei Yan <sledge.yanwei@huawei.com>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> ---
> drivers/i2c/busses/Kconfig | 10 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-hix5hd2.c | 554 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 565 insertions(+)
> create mode 100644 drivers/i2c/busses/i2c-hix5hd2.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 2ac87fa..ba0f43c 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -77,6 +77,16 @@ config I2C_AMD8111
> This driver can also be built as a module. If so, the module
> will be called i2c-amd8111.
>
> +config I2C_HIX5HD2
> + tristate "Hix5hd2 high-speed I2C driver"
> + depends on ARCH_HIX5HD2
Would like to remove the dependence in next version to enable compile-test.
The commit 4c255791ffd6410f ("asm-generic: io: implement relaxed
accessor macros as conditional wrappers") adds wrappers to asm-generic
of {read,write}{b,w,l,q}_relaxed.
Thanks
next prev parent reply other threads:[~2014-09-29 12:49 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-28 4:22 [PATCH v2 0/3] i2c: hix5hd2: add i2c controller driver Zhangfei Gao
2014-09-28 4:22 ` Zhangfei Gao
[not found] ` <1411878129-19743-1-git-send-email-zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-09-28 4:22 ` [PATCH v2 1/3] i2c: hix5hd2: add devicetree documentation Zhangfei Gao
2014-09-28 4:22 ` Zhangfei Gao
[not found] ` <1411878129-19743-2-git-send-email-zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-09-30 9:01 ` Arnd Bergmann
2014-09-30 9:01 ` Arnd Bergmann
2014-09-30 9:25 ` zhangfei
2014-09-30 9:25 ` zhangfei
[not found] ` <542A7705.2030404-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-09-30 10:24 ` Arnd Bergmann
2014-09-30 10:24 ` Arnd Bergmann
2014-09-28 4:22 ` [PATCH v2 2/3] i2c: hix5hd2: add i2c controller driver Zhangfei Gao
2014-09-28 4:22 ` Zhangfei Gao
[not found] ` <1411878129-19743-3-git-send-email-zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-09-29 12:49 ` zhangfei [this message]
2014-09-29 12:49 ` zhangfei
2014-09-28 4:22 ` [PATCH v2 3/3] ARM: dts: hix5hd2: add i2c node Zhangfei Gao
2014-09-28 4:22 ` Zhangfei Gao
[not found] ` <1411878129-19743-4-git-send-email-zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-09-30 9:02 ` Arnd Bergmann
2014-09-30 9:02 ` Arnd Bergmann
2014-09-30 9:21 ` zhangfei
2014-09-30 9:21 ` zhangfei
2014-09-30 9:31 ` Wei Xu
2014-09-30 9:31 ` Wei Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54295552.2020501@linaro.org \
--to=zhangfei.gao-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=haifeng.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=jchxue-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=sledge.yanwei-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.