From: Mario Smarduch <m.smarduch@samsung.com>
To: kvm-ia64@vger.kernel.org
Subject: Re: [PATCH v12 2/6] KVM: Add generic support for dirty page logging
Date: Thu, 30 Oct 2014 19:19:00 +0000 [thread overview]
Message-ID: <54528F24.6060602@samsung.com> (raw)
In-Reply-To: <1414017251-5772-3-git-send-email-m.smarduch@samsung.com>
On 10/30/2014 05:14 AM, Cornelia Huck wrote:
> On Wed, 22 Oct 2014 15:34:07 -0700
> Mario Smarduch <m.smarduch@samsung.com> wrote:
>
>> This patch defines KVM_GENERIC_DIRTYLOG, and moves dirty log read function
>> to it's own file virt/kvm/dirtylog.c. x86 is updated to use the generic
>> dirty log interface, selecting KVM_GENERIC_DIRTYLOG in its Kconfig and
>> makefile. No other architectures are affected, each uses it's own version.
>> This changed from previous patch revision where non-generic architectures
>> were modified.
>>
>> In subsequent patch armv7 does samething. All other architectures continue
>> use architecture defined version.
>>
>
> Hm.
>
> "The x86 specific version of dirty page logging is generic enough to be
> used by other architectures, noteably ARMv7. So let's move the x86 code
> under virt/kvm/ and make it depend on KVM_GENERIC_DIRTYLOG. Other
> architectures continue to use their own implementations."
>
> ?
I'll update descriptions for both patches, with the more concise
descriptions.
Thanks.
>
>>
>> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
>> ---
>> arch/x86/include/asm/kvm_host.h | 3 --
>> arch/x86/kvm/Kconfig | 1 +
>> arch/x86/kvm/Makefile | 1 +
>> arch/x86/kvm/x86.c | 86 ------------------------------
>> include/linux/kvm_host.h | 4 ++
>> virt/kvm/Kconfig | 3 ++
>> virt/kvm/dirtylog.c | 112 +++++++++++++++++++++++++++++++++++++++
>> 7 files changed, 121 insertions(+), 89 deletions(-)
>> create mode 100644 virt/kvm/dirtylog.c
>>
>
>> diff --git a/virt/kvm/dirtylog.c b/virt/kvm/dirtylog.c
>> new file mode 100644
>> index 0000000..67ffffa
>> --- /dev/null
>> +++ b/virt/kvm/dirtylog.c
>> @@ -0,0 +1,112 @@
>> +/*
>> + * kvm generic dirty logging support, used by architectures that share
>> + * comman dirty page logging implementation.
>
> s/comman/common/
>
> The approach looks sane to me, especially as it does not change other
> architectures needlessly.
>
WARNING: multiple messages have this Message-ID (diff)
From: Mario Smarduch <m.smarduch@samsung.com>
To: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: kvmarm@lists.cs.columbia.edu, christoffer.dall@linaro.org,
pbonzini@redhat.com, agraf@suse.de, catalin.marinas@arm.com,
borntraeger@de.ibm.com, james.hogan@imgtec.com,
marc.zyngier@arm.com, xiaoguangrong@linux.vnet.ibm.com,
kvm@vger.kernel.org, kvm-ppc@vger.kernel.org,
kvm-ia64@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
steve.capper@arm.com, peter.maydell@linaro.org
Subject: Re: [PATCH v12 2/6] KVM: Add generic support for dirty page logging
Date: Thu, 30 Oct 2014 19:19:00 +0000 [thread overview]
Message-ID: <54528F24.6060602@samsung.com> (raw)
In-Reply-To: <20141030131430.5b50a7c0.cornelia.huck@de.ibm.com>
On 10/30/2014 05:14 AM, Cornelia Huck wrote:
> On Wed, 22 Oct 2014 15:34:07 -0700
> Mario Smarduch <m.smarduch@samsung.com> wrote:
>
>> This patch defines KVM_GENERIC_DIRTYLOG, and moves dirty log read function
>> to it's own file virt/kvm/dirtylog.c. x86 is updated to use the generic
>> dirty log interface, selecting KVM_GENERIC_DIRTYLOG in its Kconfig and
>> makefile. No other architectures are affected, each uses it's own version.
>> This changed from previous patch revision where non-generic architectures
>> were modified.
>>
>> In subsequent patch armv7 does samething. All other architectures continue
>> use architecture defined version.
>>
>
> Hm.
>
> "The x86 specific version of dirty page logging is generic enough to be
> used by other architectures, noteably ARMv7. So let's move the x86 code
> under virt/kvm/ and make it depend on KVM_GENERIC_DIRTYLOG. Other
> architectures continue to use their own implementations."
>
> ?
I'll update descriptions for both patches, with the more concise
descriptions.
Thanks.
>
>>
>> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
>> ---
>> arch/x86/include/asm/kvm_host.h | 3 --
>> arch/x86/kvm/Kconfig | 1 +
>> arch/x86/kvm/Makefile | 1 +
>> arch/x86/kvm/x86.c | 86 ------------------------------
>> include/linux/kvm_host.h | 4 ++
>> virt/kvm/Kconfig | 3 ++
>> virt/kvm/dirtylog.c | 112 +++++++++++++++++++++++++++++++++++++++
>> 7 files changed, 121 insertions(+), 89 deletions(-)
>> create mode 100644 virt/kvm/dirtylog.c
>>
>
>> diff --git a/virt/kvm/dirtylog.c b/virt/kvm/dirtylog.c
>> new file mode 100644
>> index 0000000..67ffffa
>> --- /dev/null
>> +++ b/virt/kvm/dirtylog.c
>> @@ -0,0 +1,112 @@
>> +/*
>> + * kvm generic dirty logging support, used by architectures that share
>> + * comman dirty page logging implementation.
>
> s/comman/common/
>
> The approach looks sane to me, especially as it does not change other
> architectures needlessly.
>
WARNING: multiple messages have this Message-ID (diff)
From: m.smarduch@samsung.com (Mario Smarduch)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v12 2/6] KVM: Add generic support for dirty page logging
Date: Thu, 30 Oct 2014 12:19:00 -0700 [thread overview]
Message-ID: <54528F24.6060602@samsung.com> (raw)
In-Reply-To: <20141030131430.5b50a7c0.cornelia.huck@de.ibm.com>
On 10/30/2014 05:14 AM, Cornelia Huck wrote:
> On Wed, 22 Oct 2014 15:34:07 -0700
> Mario Smarduch <m.smarduch@samsung.com> wrote:
>
>> This patch defines KVM_GENERIC_DIRTYLOG, and moves dirty log read function
>> to it's own file virt/kvm/dirtylog.c. x86 is updated to use the generic
>> dirty log interface, selecting KVM_GENERIC_DIRTYLOG in its Kconfig and
>> makefile. No other architectures are affected, each uses it's own version.
>> This changed from previous patch revision where non-generic architectures
>> were modified.
>>
>> In subsequent patch armv7 does samething. All other architectures continue
>> use architecture defined version.
>>
>
> Hm.
>
> "The x86 specific version of dirty page logging is generic enough to be
> used by other architectures, noteably ARMv7. So let's move the x86 code
> under virt/kvm/ and make it depend on KVM_GENERIC_DIRTYLOG. Other
> architectures continue to use their own implementations."
>
> ?
I'll update descriptions for both patches, with the more concise
descriptions.
Thanks.
>
>>
>> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
>> ---
>> arch/x86/include/asm/kvm_host.h | 3 --
>> arch/x86/kvm/Kconfig | 1 +
>> arch/x86/kvm/Makefile | 1 +
>> arch/x86/kvm/x86.c | 86 ------------------------------
>> include/linux/kvm_host.h | 4 ++
>> virt/kvm/Kconfig | 3 ++
>> virt/kvm/dirtylog.c | 112 +++++++++++++++++++++++++++++++++++++++
>> 7 files changed, 121 insertions(+), 89 deletions(-)
>> create mode 100644 virt/kvm/dirtylog.c
>>
>
>> diff --git a/virt/kvm/dirtylog.c b/virt/kvm/dirtylog.c
>> new file mode 100644
>> index 0000000..67ffffa
>> --- /dev/null
>> +++ b/virt/kvm/dirtylog.c
>> @@ -0,0 +1,112 @@
>> +/*
>> + * kvm generic dirty logging support, used by architectures that share
>> + * comman dirty page logging implementation.
>
> s/comman/common/
>
> The approach looks sane to me, especially as it does not change other
> architectures needlessly.
>
WARNING: multiple messages have this Message-ID (diff)
From: Mario Smarduch <m.smarduch@samsung.com>
To: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: kvmarm@lists.cs.columbia.edu, christoffer.dall@linaro.org,
pbonzini@redhat.com, agraf@suse.de, catalin.marinas@arm.com,
borntraeger@de.ibm.com, james.hogan@imgtec.com,
marc.zyngier@arm.com, xiaoguangrong@linux.vnet.ibm.com,
kvm@vger.kernel.org, kvm-ppc@vger.kernel.org,
kvm-ia64@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
steve.capper@arm.com, peter.maydell@linaro.org
Subject: Re: [PATCH v12 2/6] KVM: Add generic support for dirty page logging
Date: Thu, 30 Oct 2014 12:19:00 -0700 [thread overview]
Message-ID: <54528F24.6060602@samsung.com> (raw)
In-Reply-To: <20141030131430.5b50a7c0.cornelia.huck@de.ibm.com>
On 10/30/2014 05:14 AM, Cornelia Huck wrote:
> On Wed, 22 Oct 2014 15:34:07 -0700
> Mario Smarduch <m.smarduch@samsung.com> wrote:
>
>> This patch defines KVM_GENERIC_DIRTYLOG, and moves dirty log read function
>> to it's own file virt/kvm/dirtylog.c. x86 is updated to use the generic
>> dirty log interface, selecting KVM_GENERIC_DIRTYLOG in its Kconfig and
>> makefile. No other architectures are affected, each uses it's own version.
>> This changed from previous patch revision where non-generic architectures
>> were modified.
>>
>> In subsequent patch armv7 does samething. All other architectures continue
>> use architecture defined version.
>>
>
> Hm.
>
> "The x86 specific version of dirty page logging is generic enough to be
> used by other architectures, noteably ARMv7. So let's move the x86 code
> under virt/kvm/ and make it depend on KVM_GENERIC_DIRTYLOG. Other
> architectures continue to use their own implementations."
>
> ?
I'll update descriptions for both patches, with the more concise
descriptions.
Thanks.
>
>>
>> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
>> ---
>> arch/x86/include/asm/kvm_host.h | 3 --
>> arch/x86/kvm/Kconfig | 1 +
>> arch/x86/kvm/Makefile | 1 +
>> arch/x86/kvm/x86.c | 86 ------------------------------
>> include/linux/kvm_host.h | 4 ++
>> virt/kvm/Kconfig | 3 ++
>> virt/kvm/dirtylog.c | 112 +++++++++++++++++++++++++++++++++++++++
>> 7 files changed, 121 insertions(+), 89 deletions(-)
>> create mode 100644 virt/kvm/dirtylog.c
>>
>
>> diff --git a/virt/kvm/dirtylog.c b/virt/kvm/dirtylog.c
>> new file mode 100644
>> index 0000000..67ffffa
>> --- /dev/null
>> +++ b/virt/kvm/dirtylog.c
>> @@ -0,0 +1,112 @@
>> +/*
>> + * kvm generic dirty logging support, used by architectures that share
>> + * comman dirty page logging implementation.
>
> s/comman/common/
>
> The approach looks sane to me, especially as it does not change other
> architectures needlessly.
>
next prev parent reply other threads:[~2014-10-30 19:19 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-22 22:34 [PATCH v12 2/6] KVM: Add generic support for dirty page logging Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-30 12:14 ` Cornelia Huck
2014-10-30 12:14 ` Cornelia Huck
2014-10-30 12:14 ` Cornelia Huck
2014-10-30 12:14 ` Cornelia Huck
2014-10-30 19:19 ` Mario Smarduch [this message]
2014-10-30 19:19 ` Mario Smarduch
2014-10-30 19:19 ` Mario Smarduch
2014-10-30 19:19 ` Mario Smarduch
2014-11-01 10:12 ` James Hogan
2014-11-01 10:12 ` James Hogan
2014-11-01 10:12 ` James Hogan
2014-11-01 10:12 ` James Hogan
2014-11-03 3:01 ` Takuya Yoshikawa
2014-11-03 3:01 ` Takuya Yoshikawa
2014-11-03 3:01 ` Takuya Yoshikawa
2014-11-03 3:01 ` Takuya Yoshikawa
2014-11-03 18:44 ` Mario Smarduch
2014-11-03 18:44 ` Mario Smarduch
2014-11-03 18:44 ` Mario Smarduch
2014-11-03 18:44 ` Mario Smarduch
2014-11-03 19:34 ` Mario Smarduch
2014-11-03 19:34 ` Mario Smarduch
2014-11-03 19:34 ` Mario Smarduch
2014-11-03 19:34 ` Mario Smarduch
2014-11-05 16:09 ` Paolo Bonzini
2014-11-05 16:09 ` Paolo Bonzini
2014-11-05 16:09 ` Paolo Bonzini
2014-11-05 16:09 ` Paolo Bonzini
2014-11-05 23:05 ` Mario Smarduch
2014-11-05 23:05 ` Mario Smarduch
2014-11-05 23:05 ` Mario Smarduch
2014-11-05 23:05 ` Mario Smarduch
2014-11-06 10:14 ` Paolo Bonzini
2014-11-06 10:14 ` Paolo Bonzini
2014-11-06 10:14 ` Paolo Bonzini
2014-11-06 10:14 ` Paolo Bonzini
2014-11-06 18:07 ` Mario Smarduch
2014-11-06 18:07 ` Mario Smarduch
2014-11-06 18:07 ` Mario Smarduch
2014-11-06 18:07 ` Mario Smarduch
-- strict thread matches above, loose matches on Subject: below --
2014-10-28 16:29 [PATCH v12 0/6] 2nd-request for review comments: arm/KVM: dirty page logging support for ARMv7 ( Mario Smarduch
2014-10-28 16:29 ` [PATCH v12 0/6] 2nd-request for review comments: arm/KVM: dirty page logging support for ARMv7 (3.17.0-rc1) Mario Smarduch
2014-10-28 16:29 ` Mario Smarduch
2014-10-28 16:29 ` [PATCH v12 0/6] 2nd-request for review comments: arm/KVM: dirty page logging support for ARMv7 ( Mario Smarduch
2014-10-22 22:34 [PATCH v12 4/6] arm: KVM: Add initial dirty page locking infrastructure Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 [PATCH v12 3/6] arm: KVM: Add ARMv7 API to flush TLBs Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 [PATCH v12 1/6] KVM: Add architecture-defined TLB flush support Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-30 12:06 ` Cornelia Huck
2014-10-30 12:06 ` Cornelia Huck
2014-10-30 12:06 ` Cornelia Huck
2014-10-30 12:06 ` Cornelia Huck
2014-11-05 16:10 ` Paolo Bonzini
2014-11-05 16:10 ` Paolo Bonzini
2014-11-05 16:10 ` Paolo Bonzini
2014-11-05 16:10 ` Paolo Bonzini
2014-10-22 22:34 [PATCH v12 0/6] arm/KVM: dirty page logging support for ARMv7 (3.17.0-rc1) Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-22 22:34 ` Mario Smarduch
2014-10-27 23:26 ` Wanpeng Li
2014-10-27 23:26 ` Wanpeng Li
2014-10-27 23:26 ` Wanpeng Li
2014-10-27 23:26 ` Wanpeng Li
2014-10-28 0:28 ` Mario Smarduch
2014-10-28 0:28 ` Mario Smarduch
2014-10-28 0:28 ` Mario Smarduch
2014-10-28 0:28 ` Mario Smarduch
2014-10-28 1:24 ` Wanpeng Li
2014-10-28 1:24 ` Wanpeng Li
2014-10-28 1:24 ` Wanpeng Li
2014-10-28 1:24 ` Wanpeng Li
2014-10-28 16:15 ` Mario Smarduch
2014-10-28 16:15 ` Mario Smarduch
2014-10-28 16:15 ` Mario Smarduch
2014-10-28 16:15 ` Mario Smarduch
2014-10-30 12:11 ` Christian Borntraeger
2014-10-30 12:11 ` Christian Borntraeger
2014-10-30 12:11 ` Christian Borntraeger
2014-10-30 12:11 ` Christian Borntraeger
2014-10-30 19:27 ` Mario Smarduch
2014-10-30 19:27 ` Mario Smarduch
2014-10-30 19:27 ` Mario Smarduch
2014-10-30 19:27 ` Mario Smarduch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54528F24.6060602@samsung.com \
--to=m.smarduch@samsung.com \
--cc=kvm-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.