Re: [PATCH v2 2/3] DT: iio: adc: Add CC_10001 binding documentation

[Jonathan Cameron <jic23@kernel.org>]

On 05/11/14 21:56, Ezequiel Garcia wrote:
> From: Phani Movva <Phani.Movva@imgtec.com>
> 
> Add the devicetree binding document for Cosmic Circuits 10001 ADC device.
> 
> Signed-off-by: Phani Movva <Phani.Movva@imgtec.com>
> Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
> [Ezequiel: minor style cleaning]
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
I'm unobservant.  You did cc'd the list for device tree - convention is to
also cc the listed maintainers.. (done on this reply).
> ---
>  .../devicetree/bindings/iio/adc/cc_10001_adc.txt      | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/cc_10001_adc.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/cc_10001_adc.txt b/Documentation/devicetree/bindings/iio/adc/cc_10001_adc.txt
> new file mode 100644
> index 0000000..6491839
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/cc_10001_adc.txt
> @@ -0,0 +1,19 @@
> +* Cosmic Circuits - Analog to Digital Converter (CC-10001-ADC)
> +
> +Required properties:
> +  - compatible: Should be "cosmic,10001-adc"
> +  - reg: Should contain adc registers location and length.
> +  - cosmic,adc-available-channels: Bitmask of the channels currently enabled.
> +  - clock-names: Should contain "adc".
> +  - clocks: phandles to input clocks.
> +  - vref-supply: The regulator supply ADC reference voltage.
> +
> +Example:
> +adc: adc@18101600 {
> +	compatible = "cosmic,10001-adc";
> +	reg = <0x18101600 0x24>;
> +	cosmic,adc-available-channels = <0xa>;
> +	clocks = <&adc_clk>;
> +	clock-names = "adc";
> +	vref-supply = <&reg_1v8>;
> +};
>