* Q & A @ 2015-04-25 4:11 Phạm Quang Điềm 2015-05-07 13:55 ` Daiane Angolini 2015-05-07 19:16 ` Fabio Estevam 0 siblings, 2 replies; 5+ messages in thread From: Phạm Quang Điềm @ 2015-04-25 4:11 UTC (permalink / raw) To: meta-freescale [-- Attachment #1: Type: text/plain, Size: 601 bytes --] Hi! I'm Diem from Viet Nam, I'm searching imx233 of freescale. I attacted my project with mail. Boot from microsd thought COM RS232, display characters "0x8020a007" What error? Resolve? Thank you very much! Best Regards -- ................................................................. Mr. Phạm Quang Điềm Email: quangdiem@gmail.com Tel: +84979153461 Work: Telecom System Laboratory School of Electronics and Telecommunications (SET: http://set.hust.edu.vn) Hanoi University of Science and Technology (HUST: http://hust.edu.vn) No.1 - Dai Co Viet - Ha Noi [-- Attachment #2: 2015-04-25_105902.png --] [-- Type: image/png, Size: 12049 bytes --] [-- Attachment #3: Project_TEST5.pdf --] [-- Type: application/pdf, Size: 1969155 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Q & A 2015-04-25 4:11 Q & A Phạm Quang Điềm @ 2015-05-07 13:55 ` Daiane Angolini 2015-05-07 14:10 ` Nikolay Dimitrov 2015-05-07 19:16 ` Fabio Estevam 1 sibling, 1 reply; 5+ messages in thread From: Daiane Angolini @ 2015-05-07 13:55 UTC (permalink / raw) To: quangdiem; +Cc: meta-freescale@yoctoproject.org On Sat, Apr 25, 2015 at 1:11 AM, Phạm Quang Điềm <quangdiem@gmail.com> wrote: > Hi! > > I'm Diem from Viet Nam, I'm searching imx233 of freescale. Hi Diem! How are you? I'm from Brazil. > I attacted my project with mail. > Boot from microsd thought COM RS232, display characters "0x8020a007" > > What error? Resolve? I have no idea what is your error. Maybe you can describe a little bit more about your system instead of adding a schematic... We are a software community, sometimes we can help with few hardware issue but it is not often. Daiane > Thank you very much! > > Best Regards > > > -- > ................................................................. > > > Mr. Phạm Quang Điềm > Email: quangdiem@gmail.com > Tel: +84979153461 > > Work: Telecom System Laboratory > > School of Electronics and Telecommunications (SET: http://set.hust.edu.vn) > Hanoi University of Science and Technology (HUST: http://hust.edu.vn) > > No.1 - Dai Co Viet - Ha Noi > > -- > _______________________________________________ > meta-freescale mailing list > meta-freescale@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-freescale > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Q & A 2015-05-07 13:55 ` Daiane Angolini @ 2015-05-07 14:10 ` Nikolay Dimitrov [not found] ` <CALr_-i12daE6ddBnEMX-zOfVKpVAFBLdFoYBfP9j0HSbgL5s1w@mail.gmail.com> 0 siblings, 1 reply; 5+ messages in thread From: Nikolay Dimitrov @ 2015-05-07 14:10 UTC (permalink / raw) To: quangdiem; +Cc: meta-freescale@yoctoproject.org Hi Diem, On 05/07/2015 04:55 PM, Daiane Angolini wrote: > On Sat, Apr 25, 2015 at 1:11 AM, Phạm Quang Điềm <quangdiem@gmail.com> wrote: >> Hi! >> >> I'm Diem from Viet Nam, I'm searching imx233 of freescale. > > Hi Diem! How are you? > > I'm from Brazil. > >> I attacted my project with mail. >> Boot from microsd thought COM RS232, display characters "0x8020a007" There are 2 possible issues with this error: - wrong boot configuration - please make sure the boot-config switches are set-up for sdcard boot; - you have probably wrong sdcard boot-sector. imx233 is extremely picky on the bootlet layout. Please use a proven way to generate sdcard images, like Yocto (select one of the imx233 machines and try one of the simplest images like core-image-minimal). Yocto scripts generate working bootable images and reduce the hassle of the manual error-prone work. Btw, here's a reference with imx233 ROM error codes: http://sasamy.narod.ru/IMX23_ROM_Error_Codes.pdf >> >> What error? Resolve? > > I have no idea what is your error. Maybe you can describe a little bit > more about your system instead of adding a schematic... > > We are a software community, sometimes we can help with few hardware > issue but it is not often. > > > Daiane >> Thank you very much! >> >> Best Regards >> >> >> -- >> ................................................................. >> >> >> Mr. Phạm Quang Điềm >> Email: quangdiem@gmail.com >> Tel: +84979153461 >> >> Work: Telecom System Laboratory >> >> School of Electronics and Telecommunications (SET: http://set.hust.edu.vn) >> Hanoi University of Science and Technology (HUST: http://hust.edu.vn) >> >> No.1 - Dai Co Viet - Ha Noi >> >> -- >> _______________________________________________ >> meta-freescale mailing list >> meta-freescale@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/meta-freescale >> Regards, Nikolay ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <CALr_-i12daE6ddBnEMX-zOfVKpVAFBLdFoYBfP9j0HSbgL5s1w@mail.gmail.com>]
* Re: Q & A [not found] ` <CALr_-i12daE6ddBnEMX-zOfVKpVAFBLdFoYBfP9j0HSbgL5s1w@mail.gmail.com> @ 2015-05-07 15:29 ` Nikolay Dimitrov 0 siblings, 0 replies; 5+ messages in thread From: Nikolay Dimitrov @ 2015-05-07 15:29 UTC (permalink / raw) To: quangdiem; +Cc: meta-freescale@yoctoproject.org Hi Diem, On 05/07/2015 05:54 PM, Phạm Quang Điềm wrote: > Hi! > > I'm try to set bit throught GND, DM, DP of USB 2.0 i.MX233 128 pin in > OTP mode. But, computer is not recognized? , why? > > 2015-05-07 8:10 GMT-06:00 Nikolay Dimitrov <picmaster@mail.bg > <mailto:picmaster@mail.bg>>: > > Hi Diem, > > On 05/07/2015 04:55 PM, Daiane Angolini wrote: > > On Sat, Apr 25, 2015 at 1:11 AM, Phạm Quang Điềm <quangdiem@gmail.com > <mailto:quangdiem@gmail.com>> wrote: > > Hi! > > I'm Diem from Viet Nam, I'm searching imx233 of freescale. > > > Hi Diem! How are you? > > I'm from Brazil. > > I attacted my project with mail. Boot from microsd thought COM RS232, > display characters "0x8020a007" > > > There are 2 possible issues with this error: - wrong boot > configuration - please make sure the boot-config switches are set-up > for sdcard boot; - you have probably wrong sdcard boot-sector. > imx233 is extremely picky on the bootlet layout. Please use a proven > way to generate sdcard images, like Yocto (select one of the imx233 > machines and try one of the simplest images like > core-image-minimal). Yocto scripts generate working bootable images > and reduce the hassle of the manual error-prone work. > > Btw, here's a reference with imx233 ROM error codes: > > http://sasamy.narod.ru/IMX23_ROM_Error_Codes.pdf > > > What error? Resolve? > > > I have no idea what is your error. Maybe you can describe a little > bit more about your system instead of adding a schematic... > > We are a software community, sometimes we can help with few hardware > issue but it is not often. > > > Daiane > > Thank you very much! > > Best Regards > > > -- ................................................................. > > > Mr. Phạm Quang Điềm Email: quangdiem@gmail.com > <mailto:quangdiem@gmail.com> Tel: +84979153461 <tel:%2B84979153461> > > Work: Telecom System Laboratory > > School of Electronics and Telecommunications (SET: > http://set.hust.edu.vn) Hanoi University of Science and Technology > (HUST: http://hust.edu.vn) > > No.1 - Dai Co Viet - Ha Noi > > -- _______________________________________________ meta-freescale > mailing list meta-freescale@yoctoproject.org > <mailto:meta-freescale@yoctoproject.org> > https://lists.yoctoproject.org/listinfo/meta-freescale > > > Regards, Nikolay > > > > > -- ................................................................. > > > Mr. Phạm Quang Điềm Email: quangdiem@gmail.com > <mailto:quangdiem@gmail.com> Tel: +84979153461 > > Work: Telecom System Laboratory > > School of Electronics and Telecommunications (SET: > http://set.hust.edu.vn) Hanoi University of Science and Technology > (HUST: http://hust.edu.vn) > > No.1 - Dai Co Viet - Ha Noi Unfortunately I don't know the answer for this specific Windows issue. I'm almost sure that double-checking with Freescale's imx233 datasheet will bring lots of answers to your questions. Also, please respond to the mailing list, so other engineers can also benefit of these discussions. Regards, Nikolay ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Q & A 2015-04-25 4:11 Q & A Phạm Quang Điềm 2015-05-07 13:55 ` Daiane Angolini @ 2015-05-07 19:16 ` Fabio Estevam 1 sibling, 0 replies; 5+ messages in thread From: Fabio Estevam @ 2015-05-07 19:16 UTC (permalink / raw) To: quangdiem; +Cc: meta-freescale@yoctoproject.org On Sat, Apr 25, 2015 at 1:11 AM, Phạm Quang Điềm <quangdiem@gmail.com> wrote: > Hi! > > I'm Diem from Viet Nam, I'm searching imx233 of freescale. > I attacted my project with mail. > Boot from microsd thought COM RS232, display characters "0x8020a007" > > What error? Resolve? > Thank you very much! Please use a more descriptive Subject for your message ;-) First you need to port U-boot to your board. You can take a look at imx23-olinuxino as a reference as adapt it as needed. Regards, Fabio Estevam ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-05-07 19:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-04-25 4:11 Q & A Phạm Quang Điềm
2015-05-07 13:55 ` Daiane Angolini
2015-05-07 14:10 ` Nikolay Dimitrov
[not found] ` <CALr_-i12daE6ddBnEMX-zOfVKpVAFBLdFoYBfP9j0HSbgL5s1w@mail.gmail.com>
2015-05-07 15:29 ` Nikolay Dimitrov
2015-05-07 19:16 ` Fabio Estevam
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.