From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi] [PATCH 0/6] ARM: sunxi: Introduce Allwinner H3 support
Date: Sat, 09 May 2015 17:58:43 +0200 [thread overview]
Message-ID: <554E2EB3.1000603@redhat.com> (raw)
In-Reply-To: <1430904693-1404-1-git-send-email-jenskuske@gmail.com>
Hi,
On 06-05-15 11:31, Jens Kuske wrote:
> Hi everyone,
>
> This patch series introduces basic kernel support for Allwinner's H3 SoC,
> mainly basic clocks and pinctrl. It also adds interrupts, timers,
> watchdog, RTC, dmaengine, MMC and UARTs, which are mostly compatible to
> those in earlier SoCs like A23 and A31, and can simply be reused.
>
> These patches are based on Maxime's sunxi/for-next branch from
> git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git
>
> Patch 1 adds machine support for the H3.
>
> Patch 2 adds support for the basic clocks. The AHB1/AHB2 split could
> need some discussion.
>
> Patch 3 adds the pin sets for the H3 main PIO.
>
> Patch 4 adds the H3 specific parameters to the sun6i dmaengine driver.
>
> Patch 5 adds the DTSI for the H3.
>
> Patch 6 adds a DT for the Orange Pi Plus SBC, which these patches
> were developed and tested with.
Cool stuff, thanks for your work on this. Do you have any plans to also
add support for the H3 to upstream u-boot ?
Regards,
Hans
WARNING: multiple messages have this Message-ID (diff)
From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
"Maxime Ripard"
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
"Emilio López" <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>,
"Mike Turquette"
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Linus Walleij"
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Vinod Koul" <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [linux-sunxi] [PATCH 0/6] ARM: sunxi: Introduce Allwinner H3 support
Date: Sat, 09 May 2015 17:58:43 +0200 [thread overview]
Message-ID: <554E2EB3.1000603@redhat.com> (raw)
In-Reply-To: <1430904693-1404-1-git-send-email-jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Hi,
On 06-05-15 11:31, Jens Kuske wrote:
> Hi everyone,
>
> This patch series introduces basic kernel support for Allwinner's H3 SoC,
> mainly basic clocks and pinctrl. It also adds interrupts, timers,
> watchdog, RTC, dmaengine, MMC and UARTs, which are mostly compatible to
> those in earlier SoCs like A23 and A31, and can simply be reused.
>
> These patches are based on Maxime's sunxi/for-next branch from
> git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git
>
> Patch 1 adds machine support for the H3.
>
> Patch 2 adds support for the basic clocks. The AHB1/AHB2 split could
> need some discussion.
>
> Patch 3 adds the pin sets for the H3 main PIO.
>
> Patch 4 adds the H3 specific parameters to the sun6i dmaengine driver.
>
> Patch 5 adds the DTSI for the H3.
>
> Patch 6 adds a DT for the Orange Pi Plus SBC, which these patches
> were developed and tested with.
Cool stuff, thanks for your work on this. Do you have any plans to also
add support for the H3 to upstream u-boot ?
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Hans de Goede <hdegoede@redhat.com>
To: jenskuske@gmail.com,
"Maxime Ripard" <maxime.ripard@free-electrons.com>,
"Emilio López" <emilio@elopez.com.ar>,
"Mike Turquette" <mturquette@linaro.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Vinod Koul" <vinod.koul@intel.com>,
"Rob Herring" <robh+dt@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: Re: [linux-sunxi] [PATCH 0/6] ARM: sunxi: Introduce Allwinner H3 support
Date: Sat, 09 May 2015 17:58:43 +0200 [thread overview]
Message-ID: <554E2EB3.1000603@redhat.com> (raw)
In-Reply-To: <1430904693-1404-1-git-send-email-jenskuske@gmail.com>
Hi,
On 06-05-15 11:31, Jens Kuske wrote:
> Hi everyone,
>
> This patch series introduces basic kernel support for Allwinner's H3 SoC,
> mainly basic clocks and pinctrl. It also adds interrupts, timers,
> watchdog, RTC, dmaengine, MMC and UARTs, which are mostly compatible to
> those in earlier SoCs like A23 and A31, and can simply be reused.
>
> These patches are based on Maxime's sunxi/for-next branch from
> git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git
>
> Patch 1 adds machine support for the H3.
>
> Patch 2 adds support for the basic clocks. The AHB1/AHB2 split could
> need some discussion.
>
> Patch 3 adds the pin sets for the H3 main PIO.
>
> Patch 4 adds the H3 specific parameters to the sun6i dmaengine driver.
>
> Patch 5 adds the DTSI for the H3.
>
> Patch 6 adds a DT for the Orange Pi Plus SBC, which these patches
> were developed and tested with.
Cool stuff, thanks for your work on this. Do you have any plans to also
add support for the H3 to upstream u-boot ?
Regards,
Hans
next prev parent reply other threads:[~2015-05-09 15:58 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-06 9:31 [PATCH 0/6] ARM: sunxi: Introduce Allwinner H3 support Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 9:31 ` [PATCH 1/6] " Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 10:04 ` Maxime Ripard
2015-05-06 10:04 ` Maxime Ripard
2015-05-06 10:23 ` Jens Kuske
2015-05-06 10:23 ` Jens Kuske
2015-05-06 10:23 ` Jens Kuske
2015-05-06 12:22 ` Maxime Ripard
2015-05-06 12:22 ` Maxime Ripard
2015-05-06 12:22 ` Maxime Ripard
2015-05-06 9:31 ` [PATCH 2/6] clk: sunxi: Add H3 clocks support Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 9:47 ` Chen-Yu Tsai
2015-05-06 9:47 ` Chen-Yu Tsai
2015-05-06 9:47 ` Chen-Yu Tsai
2015-05-06 10:18 ` Jens Kuske
2015-05-06 10:18 ` Jens Kuske
2015-05-06 10:18 ` Jens Kuske
2015-05-09 11:29 ` Maxime Ripard
2015-05-09 11:29 ` Maxime Ripard
2015-05-09 11:29 ` Maxime Ripard
2015-05-09 11:27 ` Maxime Ripard
2015-05-09 11:27 ` Maxime Ripard
2015-05-09 11:27 ` Maxime Ripard
2015-05-10 10:54 ` Jens Kuske
2015-05-10 10:54 ` Jens Kuske
2015-05-10 10:54 ` Jens Kuske
2015-05-12 14:44 ` Maxime Ripard
2015-05-12 14:44 ` Maxime Ripard
2015-05-12 14:44 ` Maxime Ripard
2015-05-14 5:14 ` Chen-Yu Tsai
2015-05-14 5:14 ` Chen-Yu Tsai
2015-05-14 5:14 ` Chen-Yu Tsai
2015-05-15 12:49 ` Maxime Ripard
2015-05-15 12:49 ` Maxime Ripard
2015-05-15 12:49 ` Maxime Ripard
2015-05-06 9:31 ` [PATCH 3/6] pinctrl: sunxi: Add H3 PIO controller support Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 10:11 ` Maxime Ripard
2015-05-06 10:11 ` Maxime Ripard
2015-05-06 10:34 ` Jens Kuske
2015-05-06 10:34 ` Jens Kuske
2015-05-06 10:34 ` Jens Kuske
2015-05-06 12:23 ` Maxime Ripard
2015-05-06 12:23 ` Maxime Ripard
2015-05-06 12:23 ` Maxime Ripard
2015-05-07 8:10 ` Paul Bolle
2015-05-07 8:10 ` Paul Bolle
2015-05-07 8:10 ` Paul Bolle
2015-05-09 9:17 ` Jens Kuske
2015-05-09 9:17 ` Jens Kuske
2015-05-09 9:17 ` Jens Kuske
2015-05-09 12:19 ` Maxime Ripard
2015-05-09 12:19 ` Maxime Ripard
2015-05-09 12:19 ` Maxime Ripard
2015-05-06 9:31 ` [PATCH 4/6] dmaengine: sun6i: Add support for Allwinner H3 (sun8i) variant Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 10:13 ` Maxime Ripard
2015-05-06 10:13 ` Maxime Ripard
2015-05-06 10:13 ` Maxime Ripard
2015-05-08 3:44 ` Vinod Koul
2015-05-08 3:44 ` Vinod Koul
2015-05-08 3:44 ` Vinod Koul
2015-05-08 7:19 ` Maxime Ripard
2015-05-08 7:19 ` Maxime Ripard
2015-05-08 7:19 ` Maxime Ripard
2015-05-08 9:26 ` Vinod Koul
2015-05-08 9:26 ` Vinod Koul
2015-05-08 9:26 ` Vinod Koul
2015-05-06 9:31 ` [PATCH 5/6] ARM: dts: sunxi: Add Allwinner H3 DTSI Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 12:19 ` Maxime Ripard
2015-05-06 12:19 ` Maxime Ripard
2015-05-06 12:19 ` Maxime Ripard
2015-05-06 20:47 ` Jens Kuske
2015-05-06 20:47 ` Jens Kuske
2015-05-06 20:47 ` Jens Kuske
2015-05-09 11:44 ` Maxime Ripard
2015-05-09 11:44 ` Maxime Ripard
2015-05-09 11:44 ` Maxime Ripard
2015-05-11 8:11 ` Chen-Yu Tsai
2015-05-11 8:11 ` Chen-Yu Tsai
2015-05-11 8:11 ` Chen-Yu Tsai
2015-05-06 9:31 ` [PATCH 6/6] ARM: dts: sun8i: Add Orange Pi Plus support Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-09 15:58 ` Hans de Goede [this message]
2015-05-09 15:58 ` [linux-sunxi] [PATCH 0/6] ARM: sunxi: Introduce Allwinner H3 support Hans de Goede
2015-05-09 15:58 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=554E2EB3.1000603@redhat.com \
--to=hdegoede@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.