All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@linaro.org>
To: Feng Wu <feng.wu@intel.com>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: pbonzini@redhat.com, alex.williamson@redhat.com, joro@8bytes.org
Subject: Re: [v5 16/19] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd'
Date: Mon, 13 Jul 2015 15:09:55 +0200	[thread overview]
Message-ID: <55A3B8A3.8070403@linaro.org> (raw)
In-Reply-To: <1436780855-3617-17-git-send-email-feng.wu@intel.com>

On 07/13/2015 11:47 AM, Feng Wu wrote:
> This patch adds an arch specific hooks 'arch_update' in
> 'struct kvm_kernel_irqfd'. On Intel side, it is used to
> update the IRTE when VT-d posted-interrupts is used.
> 
> Signed-off-by: Feng Wu <feng.wu@intel.com>
> ---
>  arch/x86/kvm/x86.c        |  5 +++++
>  include/linux/kvm_host.h  |  3 +++
>  include/linux/kvm_irqfd.h |  2 ++
>  virt/kvm/eventfd.c        | 13 ++++++++++++-
>  4 files changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 62bbafe..a88e659 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -8063,6 +8063,11 @@ void kvm_arch_irq_consumer_init(struct irq_bypass_consumer *cons)
>  	cons->del_producer = kvm_arch_irq_bypass_del_producer;
>  }
>  
> +void kvm_arch_irqfd_init(struct kvm_kernel_irqfd *irqfd)
> +{
> +	irqfd->arch_update = kvm_arch_update_pi_irte;
> +}
> +
>  EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_exit);
>  EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_inj_virq);
>  EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_page_fault);
> diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
> index e693b3a..b37ebca 100644
> --- a/include/linux/kvm_host.h
> +++ b/include/linux/kvm_host.h
> @@ -33,6 +33,8 @@
>  
>  #include <asm/kvm_host.h>
>  
> +struct kvm_kernel_irqfd;
> +
>  /*
>   * The bit 16 ~ bit 31 of kvm_memory_region::flags are internally used
>   * in kvm, other bits are visible for userspace which are defined in
> @@ -1074,6 +1076,7 @@ extern struct kvm_device_ops kvm_arm_vgic_v2_ops;
>  extern struct kvm_device_ops kvm_arm_vgic_v3_ops;
>  
>  void kvm_arch_irq_consumer_init(struct irq_bypass_consumer *cons);
> +void kvm_arch_irqfd_init(struct kvm_kernel_irqfd *irqfd);
need to handle the case this is not implemented by the arch?


>  
>  #ifdef CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT
>  
> diff --git a/include/linux/kvm_irqfd.h b/include/linux/kvm_irqfd.h
> index cf9aad4..47a2696 100644
> --- a/include/linux/kvm_irqfd.h
> +++ b/include/linux/kvm_irqfd.h
> @@ -67,6 +67,8 @@ struct kvm_kernel_irqfd {
>  	struct work_struct shutdown;
>  	struct irq_bypass_consumer consumer;
>  	struct irq_bypass_producer *producer;
> +	int (*arch_update)(struct kvm *kvm, unsigned int host_irq,
> +			   uint32_t guest_irq, bool set);
you must document this cb cannot sleep I think
Eric
>  };
>  
>  #endif /* __LINUX_KVM_IRQFD_H */
> diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
> index 4225eea..762282c 100644
> --- a/virt/kvm/eventfd.c
> +++ b/virt/kvm/eventfd.c
> @@ -276,6 +276,7 @@ kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args)
>  	INIT_LIST_HEAD(&irqfd->list);
>  	INIT_WORK(&irqfd->inject, irqfd_inject);
>  	INIT_WORK(&irqfd->shutdown, irqfd_shutdown);
> +	kvm_arch_irqfd_init(irqfd);
>  	seqcount_init(&irqfd->irq_entry_sc);
>  
>  	f = fdget(args->fd);
> @@ -562,13 +563,23 @@ kvm_irqfd_release(struct kvm *kvm)
>   */
>  void kvm_irq_routing_update(struct kvm *kvm)
>  {
> +	int ret;
>  	struct kvm_kernel_irqfd *irqfd;
>  
>  	spin_lock_irq(&kvm->irqfds.lock);
>  
> -	list_for_each_entry(irqfd, &kvm->irqfds.items, list)
> +	list_for_each_entry(irqfd, &kvm->irqfds.items, list) {
>  		irqfd_update(kvm, irqfd);
>  
> +		if (irqfd->arch_update) {
> +			BUG_ON(!irqfd->producer);
> +			ret = irqfd->arch_update(
> +					irqfd->kvm, irqfd->producer->irq,
> +					irqfd->gsi, 1);
> +			WARN_ON(ret);
> +		}
> +	}
> +
>  	spin_unlock_irq(&kvm->irqfds.lock);
>  }
>  
> 

  reply	other threads:[~2015-07-13 13:09 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-13  9:47 [v5 00/19] Add VT-d Posted-Interrupts support Feng Wu
2015-07-13  9:47 ` [v5 01/19] KVM: Extend struct pi_desc for VT-d Posted-Interrupts Feng Wu
2015-07-13  9:47 ` [v5 02/19] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2015-07-13  9:47 ` [v5 03/19] KVM: Define a new interface kvm_intr_is_single_vcpu() Feng Wu
2015-07-13  9:47 ` [v5 04/19] KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu Feng Wu
2015-07-13  9:47 ` [v5 05/19] KVM: Add interfaces to control PI outside vmx Feng Wu
2015-07-13  9:47 ` [v5 06/19] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2015-07-13  9:47 ` [v5 07/19] KVM: make kvm_set_msi_irq() public Feng Wu
2015-07-13  9:47 ` [v5 08/19] vfio: Select IRQ_BYPASS_MANAGER for vfio PCI devices Feng Wu
2015-07-13  9:47 ` [v5 09/19] vfio: Register/unregister irq_bypass_producer Feng Wu
2015-07-13 12:55   ` Eric Auger
2015-07-13 18:57   ` Alex Williamson
2015-07-13  9:47 ` [v5 10/19] KVM, x86: Select IRQ_BYPASS_MANAGER for KVM_INTEL Feng Wu
2015-07-13  9:47 ` [v5 11/19] KVM: create kvm_irqfd.h Feng Wu
2015-07-13  9:47 ` [v5 12/19] KVM: eventfd: add irq bypass information in irqfd Feng Wu
2015-07-13  9:47 ` [v5 13/19] KVM: x86: Update IRTE for posted-interrupts Feng Wu
2015-07-13  9:47 ` [v5 14/19] KVM: x86: Add arch specific routines for irqbypass manager Feng Wu
2015-07-13 13:17   ` Eric Auger
2015-07-13  9:47 ` [v5 15/19] KVM: eventfd: add irq bypass consumer management Feng Wu
2015-07-13 13:16   ` Eric Auger
2015-07-13 13:47     ` Paolo Bonzini
2015-07-28  5:06       ` Wu, Feng
2015-07-13  9:47 ` [v5 16/19] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd' Feng Wu
2015-07-13 13:09   ` Eric Auger [this message]
2015-07-13  9:47 ` [v5 17/19] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2015-07-13  9:47 ` [v5 18/19] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2015-07-13  9:47 ` [v5 19/19] KVM: Warn if 'SN' is set during posting interrupts by software Feng Wu
2015-07-13 13:19 ` [v5 00/19] Add VT-d Posted-Interrupts support Eric Auger
2015-07-14  1:08   ` Wu, Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55A3B8A3.8070403@linaro.org \
    --to=eric.auger@linaro.org \
    --cc=alex.williamson@redhat.com \
    --cc=feng.wu@intel.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.