All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@linaro.org>
To: Feng Wu <feng.wu@intel.com>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: pbonzini@redhat.com, alex.williamson@redhat.com, joro@8bytes.org
Subject: Re: [v5 00/19] Add VT-d Posted-Interrupts support
Date: Mon, 13 Jul 2015 15:19:24 +0200	[thread overview]
Message-ID: <55A3BADC.4020308@linaro.org> (raw)
In-Reply-To: <1436780855-3617-1-git-send-email-feng.wu@intel.com>

Hi Feng,
On 07/13/2015 11:47 AM, Feng Wu wrote:
> VT-d Posted-Interrupts is an enhancement to CPU side Posted-Interrupt.
> With VT-d Posted-Interrupts enabled, external interrupts from
> direct-assigned devices can be delivered to guests without VMM
> intervention when guest is running in non-root mode.
> 
> You can find the VT-d Posted-Interrtups Spec. in the following URL:
> http://www.intel.com/content/www/us/en/intelligent-systems/intel-technology/vt-directed-io-spec.html
> 
> This series was part of http://thread.gmane.org/gmane.linux.kernel.iommu/7708. To make things clear, send out IOMMU part here.
> 
> This patch-set is based on the lastest x86/apic branch of tip tree.
> 
> Divide the whole series which contain multiple components into three parts:
> - Prerequisite changes to irq subsystem (already merged)
> - IOMMU part (already merged)
> - KVM and VFIO parts (this series)
> 
> v5:
> - Based on Alex and Eric's irq bypass manager:
> https://lkml.org/lkml/2015/7/10/663
> - Reuse some common patch from Eric

A comment about the overall structure. Previously you prefered to have 2
separate series, one usable by both of us and one with my forwarding
stuff. Why did you change your mind?

Best Regards

Eric
> 
> Eric Auger (3):
>   KVM: create kvm_irqfd.h
>   KVM: eventfd: add irq bypass information in irqfd
>   KVM: eventfd: add irq bypass consumer management
> 
> Feng Wu (16):
>   KVM: Extend struct pi_desc for VT-d Posted-Interrupts
>   KVM: Add some helper functions for Posted-Interrupts
>   KVM: Define a new interface kvm_intr_is_single_vcpu()
>   KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu
>   KVM: Add interfaces to control PI outside vmx
>   KVM: Make struct kvm_irq_routing_table accessible
>   KVM: make kvm_set_msi_irq() public
>   vfio: Select IRQ_BYPASS_MANAGER for vfio PCI devices
>   vfio: Register/unregister irq_bypass_producer
>   KVM, x86: Select IRQ_BYPASS_MANAGER for KVM_INTEL
>   KVM: x86: Update IRTE for posted-interrupts
>   KVM: x86: Add arch specific routines for irqbypass manager
>   KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd'
>   KVM: Update Posted-Interrupts Descriptor when vCPU is preempted
>   KVM: Update Posted-Interrupts Descriptor when vCPU is blocked
>   KVM: Warn if 'SN' is set during posting interrupts by software
> 
>  arch/x86/include/asm/kvm_host.h     |  15 ++
>  arch/x86/kvm/Kconfig                |   1 +
>  arch/x86/kvm/irq_comm.c             |  28 +++-
>  arch/x86/kvm/vmx.c                  | 278 +++++++++++++++++++++++++++++++++++-
>  arch/x86/kvm/x86.c                  | 160 +++++++++++++++++++--
>  drivers/vfio/pci/Kconfig            |   1 +
>  drivers/vfio/pci/vfio_pci_intrs.c   |  19 +++
>  drivers/vfio/pci/vfio_pci_private.h |   2 +
>  include/linux/kvm_host.h            |  23 +++
>  include/linux/kvm_irqfd.h           |  74 ++++++++++
>  virt/kvm/eventfd.c                  | 115 ++++++---------
>  virt/kvm/irqchip.c                  |  11 --
>  virt/kvm/kvm_main.c                 |   3 +
>  13 files changed, 632 insertions(+), 98 deletions(-)
>  create mode 100644 include/linux/kvm_irqfd.h
> 

  parent reply	other threads:[~2015-07-13 13:19 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-13  9:47 [v5 00/19] Add VT-d Posted-Interrupts support Feng Wu
2015-07-13  9:47 ` [v5 01/19] KVM: Extend struct pi_desc for VT-d Posted-Interrupts Feng Wu
2015-07-13  9:47 ` [v5 02/19] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2015-07-13  9:47 ` [v5 03/19] KVM: Define a new interface kvm_intr_is_single_vcpu() Feng Wu
2015-07-13  9:47 ` [v5 04/19] KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu Feng Wu
2015-07-13  9:47 ` [v5 05/19] KVM: Add interfaces to control PI outside vmx Feng Wu
2015-07-13  9:47 ` [v5 06/19] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2015-07-13  9:47 ` [v5 07/19] KVM: make kvm_set_msi_irq() public Feng Wu
2015-07-13  9:47 ` [v5 08/19] vfio: Select IRQ_BYPASS_MANAGER for vfio PCI devices Feng Wu
2015-07-13  9:47 ` [v5 09/19] vfio: Register/unregister irq_bypass_producer Feng Wu
2015-07-13 12:55   ` Eric Auger
2015-07-13 18:57   ` Alex Williamson
2015-07-13  9:47 ` [v5 10/19] KVM, x86: Select IRQ_BYPASS_MANAGER for KVM_INTEL Feng Wu
2015-07-13  9:47 ` [v5 11/19] KVM: create kvm_irqfd.h Feng Wu
2015-07-13  9:47 ` [v5 12/19] KVM: eventfd: add irq bypass information in irqfd Feng Wu
2015-07-13  9:47 ` [v5 13/19] KVM: x86: Update IRTE for posted-interrupts Feng Wu
2015-07-13  9:47 ` [v5 14/19] KVM: x86: Add arch specific routines for irqbypass manager Feng Wu
2015-07-13 13:17   ` Eric Auger
2015-07-13  9:47 ` [v5 15/19] KVM: eventfd: add irq bypass consumer management Feng Wu
2015-07-13 13:16   ` Eric Auger
2015-07-13 13:47     ` Paolo Bonzini
2015-07-28  5:06       ` Wu, Feng
2015-07-13  9:47 ` [v5 16/19] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd' Feng Wu
2015-07-13 13:09   ` Eric Auger
2015-07-13  9:47 ` [v5 17/19] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2015-07-13  9:47 ` [v5 18/19] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2015-07-13  9:47 ` [v5 19/19] KVM: Warn if 'SN' is set during posting interrupts by software Feng Wu
2015-07-13 13:19 ` Eric Auger [this message]
2015-07-14  1:08   ` [v5 00/19] Add VT-d Posted-Interrupts support Wu, Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55A3BADC.4020308@linaro.org \
    --to=eric.auger@linaro.org \
    --cc=alex.williamson@redhat.com \
    --cc=feng.wu@intel.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.