* [BUGFIX]
@ 2009-04-02 12:52 phcoder
2009-04-02 14:45 ` [BUGFIX] Bean
0 siblings, 1 reply; 15+ messages in thread
From: phcoder @ 2009-04-02 12:52 UTC (permalink / raw)
To: The development of GRUB 2
[-- Attachment #1: Type: text/plain, Size: 250 bytes --]
Hello symbols from command.h aren't exported correctly. Here's a bugfix.
It compiles with it but I haven't checked yet if compiled binary works.
Can someone familiar with build system have a look at this?
--
Regards
Vladimir 'phcoder' Serbinenko
[-- Attachment #2: ppcfix.diff --]
[-- Type: text/x-diff, Size: 1280 bytes --]
diff --git a/conf/powerpc-ieee1275.rmk b/conf/powerpc-ieee1275.rmk
index 437bf83..9ce1c9a 100644
--- a/conf/powerpc-ieee1275.rmk
+++ b/conf/powerpc-ieee1275.rmk
@@ -16,7 +16,8 @@ DEFSYMFILES += kernel_syms.lst
kernel_elf_HEADERS = boot.h cache.h device.h disk.h dl.h elf.h elfload.h \
env.h err.h file.h fs.h kernel.h misc.h mm.h net.h parser.h rescue.h \
symbol.h term.h time.h types.h powerpc/libgcc.h loader.h partition.h \
- pc_partition.h ieee1275/ieee1275.h machine/kernel.h handler.h
+ pc_partition.h ieee1275/ieee1275.h machine/kernel.h handler.h \
+ command.h list.h
symlist.c: $(addprefix include/grub/,$(kernel_elf_HEADERS)) config.h gensymlist.sh
/bin/sh gensymlist.sh $(filter %.h,$^) > $@ || (rm -f $@; exit 1)
@@ -88,8 +89,7 @@ kernel_elf_SOURCES = kern/powerpc/ieee1275/startup.S kern/ieee1275/cmain.c \
kern/parser.c kern/partition.c kern/env.c kern/powerpc/dl.c \
kern/generic/millisleep.c kern/time.c \
symlist.c kern/powerpc/cache.S
-kernel_elf_HEADERS = grub/powerpc/ieee1275/ieee1275.h list.h handler.h \
- command.h
+kernel_elf_HEADERS += grub/powerpc/ieee1275/ieee1275.h
kernel_elf_CFLAGS = $(COMMON_CFLAGS)
kernel_elf_ASFLAGS = $(COMMON_ASFLAGS)
kernel_elf_LDFLAGS = $(COMMON_LDFLAGS) -static-libgcc -lgcc \
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [BUGFIX]
2009-04-02 12:52 [BUGFIX] phcoder
@ 2009-04-02 14:45 ` Bean
2009-04-02 14:48 ` [BUGFIX] phcoder
0 siblings, 1 reply; 15+ messages in thread
From: Bean @ 2009-04-02 14:45 UTC (permalink / raw)
To: The development of GRUB 2
On Thu, Apr 2, 2009 at 8:52 PM, phcoder <phcoder@gmail.com> wrote:
> Hello symbols from command.h aren't exported correctly. Here's a bugfix. It
> compiles with it but I haven't checked yet if compiled binary works. Can
> someone familiar with build system have a look at this?
Hi,
It's a little wired, why would powerpc-ieee1275.rmk has two
kernel_elf_HEADERS in the first place ?
--
Bean
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [BUGFIX]
2009-04-02 14:45 ` [BUGFIX] Bean
@ 2009-04-02 14:48 ` phcoder
2009-04-02 15:55 ` [BUGFIX] Manoel Rebelo Abranches
0 siblings, 1 reply; 15+ messages in thread
From: phcoder @ 2009-04-02 14:48 UTC (permalink / raw)
To: The development of GRUB 2
Bean wrote:
> On Thu, Apr 2, 2009 at 8:52 PM, phcoder <phcoder@gmail.com> wrote:
>> Hello symbols from command.h aren't exported correctly. Here's a bugfix. It
>> compiles with it but I haven't checked yet if compiled binary works. Can
>> someone familiar with build system have a look at this?
>
> Hi,
>
> It's a little wired, why would powerpc-ieee1275.rmk has two
> kernel_elf_HEADERS in the first place ?
>
I have no idea, I was hoping that someone more familiar with build
system could tell me why it's done so
--
Regards
Vladimir 'phcoder' Serbinenko
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [BUGFIX]
2009-04-02 14:48 ` [BUGFIX] phcoder
@ 2009-04-02 15:55 ` Manoel Rebelo Abranches
2009-04-02 18:19 ` [BUGFIX] phcoder
0 siblings, 1 reply; 15+ messages in thread
From: Manoel Rebelo Abranches @ 2009-04-02 15:55 UTC (permalink / raw)
To: The development of GRUB 2
symlist.c is generated by gensymlist.sh script so only the patch for
conf/powerpc-ieee1275.rmk is really necessary.
On Thu, 2009-04-02 at 16:48 +0200, phcoder wrote:
> Bean wrote:
> > On Thu, Apr 2, 2009 at 8:52 PM, phcoder <phcoder@gmail.com> wrote:
> >> Hello symbols from command.h aren't exported correctly. Here's a bugfix. It
> >> compiles with it but I haven't checked yet if compiled binary works. Can
> >> someone familiar with build system have a look at this?
> >
> > Hi,
> >
> > It's a little wired, why would powerpc-ieee1275.rmk has two
> > kernel_elf_HEADERS in the first place ?
> >
> I have no idea, I was hoping that someone more familiar with build
> system could tell me why it's done so
>
--
Best Regards,
Manoel Rebelo Abranches
IBM Linux Technology Center Brazil
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [BUGFIX]
2009-04-02 15:55 ` [BUGFIX] Manoel Rebelo Abranches
@ 2009-04-02 18:19 ` phcoder
2009-04-03 5:06 ` [BUGFIX] Bean
2009-04-03 14:48 ` [BUGFIX] phcoder
0 siblings, 2 replies; 15+ messages in thread
From: phcoder @ 2009-04-02 18:19 UTC (permalink / raw)
To: The development of GRUB 2
Is kernel_elf_HEADERS used for anything else than symlist.c and
kernel-symlist,lst generation?
Manoel Rebelo Abranches wrote:
> symlist.c is generated by gensymlist.sh script so only the patch for
> conf/powerpc-ieee1275.rmk is really necessary.
>
> On Thu, 2009-04-02 at 16:48 +0200, phcoder wrote:
>> Bean wrote:
>>> On Thu, Apr 2, 2009 at 8:52 PM, phcoder <phcoder@gmail.com> wrote:
>>>> Hello symbols from command.h aren't exported correctly. Here's a bugfix. It
>>>> compiles with it but I haven't checked yet if compiled binary works. Can
>>>> someone familiar with build system have a look at this?
>>> Hi,
>>>
>>> It's a little wired, why would powerpc-ieee1275.rmk has two
>>> kernel_elf_HEADERS in the first place ?
>>>
>> I have no idea, I was hoping that someone more familiar with build
>> system could tell me why it's done so
>>
--
Regards
Vladimir 'phcoder' Serbinenko
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [BUGFIX]
2009-04-02 18:19 ` [BUGFIX] phcoder
@ 2009-04-03 5:06 ` Bean
2009-04-03 14:48 ` [BUGFIX] phcoder
1 sibling, 0 replies; 15+ messages in thread
From: Bean @ 2009-04-03 5:06 UTC (permalink / raw)
To: The development of GRUB 2
On Fri, Apr 3, 2009 at 2:19 AM, phcoder <phcoder@gmail.com> wrote:
> Is kernel_elf_HEADERS used for anything else than symlist.c and
> kernel-symlist,lst generation?
Hi,
I believe that kernel_elf_HEADERS is only used for symlist.c, so you
should be able to remove the second kernel_elf_HEADERS and still
compile properly.
--
Bean
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [BUGFIX]
2009-04-02 18:19 ` [BUGFIX] phcoder
2009-04-03 5:06 ` [BUGFIX] Bean
@ 2009-04-03 14:48 ` phcoder
2009-04-03 16:55 ` [BUGFIX] Pavel Roskin
2009-04-04 12:30 ` [BUGFIX] phcoder
1 sibling, 2 replies; 15+ messages in thread
From: phcoder @ 2009-04-03 14:48 UTC (permalink / raw)
To: The development of GRUB 2
[-- Attachment #1: Type: text/plain, Size: 1147 bytes --]
rgrep revealed no use for the second kernel_elf_HEADERS, so I propose to
remove it altogether
Is everybody comfortable with this patch? If I hear no oppositions in
couple of days I'll commit it.
phcoder wrote:
> Is kernel_elf_HEADERS used for anything else than symlist.c and
> kernel-symlist,lst generation?
> Manoel Rebelo Abranches wrote:
>> symlist.c is generated by gensymlist.sh script so only the patch for
>> conf/powerpc-ieee1275.rmk is really necessary.
>>
>> On Thu, 2009-04-02 at 16:48 +0200, phcoder wrote:
>>> Bean wrote:
>>>> On Thu, Apr 2, 2009 at 8:52 PM, phcoder <phcoder@gmail.com> wrote:
>>>>> Hello symbols from command.h aren't exported correctly. Here's a
>>>>> bugfix. It
>>>>> compiles with it but I haven't checked yet if compiled binary
>>>>> works. Can
>>>>> someone familiar with build system have a look at this?
>>>> Hi,
>>>>
>>>> It's a little wired, why would powerpc-ieee1275.rmk has two
>>>> kernel_elf_HEADERS in the first place ?
>>>>
>>> I have no idea, I was hoping that someone more familiar with build
>>> system could tell me why it's done so
>>>
>
>
--
Regards
Vladimir 'phcoder' Serbinenko
[-- Attachment #2: ppcfix.diff --]
[-- Type: text/x-diff, Size: 1615 bytes --]
diff --git a/ChangeLog b/ChangeLog
index 8532741..61279fa 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,8 @@
+2009-04-03 Vladimir Serbinenko <phcoder@gmail.com>
+
+ * conf/powerpc-ieee1275 (kernel_elf_HEADERS): add list.h and command.h
+ remove suplicate kernel_elf_HEADERS
+
2009-04-01 Pavel Roskin <proski@gnu.org>
* Makefile.in: Remove all references to MODULE_LDFLAGS, it's
diff --git a/conf/powerpc-ieee1275.rmk b/conf/powerpc-ieee1275.rmk
index 5aaaf56..9ba2981 100644
--- a/conf/powerpc-ieee1275.rmk
+++ b/conf/powerpc-ieee1275.rmk
@@ -16,7 +16,8 @@ DEFSYMFILES += kernel_syms.lst
kernel_elf_HEADERS = boot.h cache.h device.h disk.h dl.h elf.h elfload.h \
env.h err.h file.h fs.h kernel.h misc.h mm.h net.h parser.h rescue.h \
symbol.h term.h time.h types.h powerpc/libgcc.h loader.h partition.h \
- pc_partition.h ieee1275/ieee1275.h machine/kernel.h handler.h
+ pc_partition.h ieee1275/ieee1275.h machine/kernel.h handler.h list.h \
+ command.h
symlist.c: $(addprefix include/grub/,$(kernel_elf_HEADERS)) config.h gensymlist.sh
/bin/sh gensymlist.sh $(filter %.h,$^) > $@ || (rm -f $@; exit 1)
@@ -87,8 +88,6 @@ kernel_elf_SOURCES = kern/powerpc/ieee1275/startup.S kern/ieee1275/cmain.c \
kern/parser.c kern/partition.c kern/env.c kern/powerpc/dl.c \
kern/generic/millisleep.c kern/time.c \
symlist.c kern/powerpc/cache.S
-kernel_elf_HEADERS = grub/powerpc/ieee1275/ieee1275.h list.h handler.h \
- command.h
kernel_elf_CFLAGS = $(COMMON_CFLAGS)
kernel_elf_ASFLAGS = $(COMMON_ASFLAGS)
kernel_elf_LDFLAGS = $(COMMON_LDFLAGS) -static-libgcc -lgcc \
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [BUGFIX]
2009-04-03 14:48 ` [BUGFIX] phcoder
@ 2009-04-03 16:55 ` Pavel Roskin
2009-04-04 12:30 ` [BUGFIX] phcoder
1 sibling, 0 replies; 15+ messages in thread
From: Pavel Roskin @ 2009-04-03 16:55 UTC (permalink / raw)
To: The development of GRUB 2
On Fri, 2009-04-03 at 16:48 +0200, phcoder wrote:
> rgrep revealed no use for the second kernel_elf_HEADERS, so I propose to
> remove it altogether
> Is everybody comfortable with this patch? If I hear no oppositions in
> couple of days I'll commit it.
No objections. By the way, the same problems exists in
sparc64-ieee1275.rmk
Please change "suplicate" to "extraneous" in ChangeLog.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [BUGFIX]
2009-04-03 14:48 ` [BUGFIX] phcoder
2009-04-03 16:55 ` [BUGFIX] Pavel Roskin
@ 2009-04-04 12:30 ` phcoder
1 sibling, 0 replies; 15+ messages in thread
From: phcoder @ 2009-04-04 12:30 UTC (permalink / raw)
To: The development of GRUB 2
Commited
phcoder wrote:
> rgrep revealed no use for the second kernel_elf_HEADERS, so I propose to
> remove it altogether
> Is everybody comfortable with this patch? If I hear no oppositions in
> couple of days I'll commit it.
> phcoder wrote:
>> Is kernel_elf_HEADERS used for anything else than symlist.c and
>> kernel-symlist,lst generation?
>> Manoel Rebelo Abranches wrote:
>>> symlist.c is generated by gensymlist.sh script so only the patch for
>>> conf/powerpc-ieee1275.rmk is really necessary.
>>>
>>> On Thu, 2009-04-02 at 16:48 +0200, phcoder wrote:
>>>> Bean wrote:
>>>>> On Thu, Apr 2, 2009 at 8:52 PM, phcoder <phcoder@gmail.com> wrote:
>>>>>> Hello symbols from command.h aren't exported correctly. Here's a
>>>>>> bugfix. It
>>>>>> compiles with it but I haven't checked yet if compiled binary
>>>>>> works. Can
>>>>>> someone familiar with build system have a look at this?
>>>>> Hi,
>>>>>
>>>>> It's a little wired, why would powerpc-ieee1275.rmk has two
>>>>> kernel_elf_HEADERS in the first place ?
>>>>>
>>>> I have no idea, I was hoping that someone more familiar with build
>>>> system could tell me why it's done so
>>>>
>>
>>
>
>
--
Regards
Vladimir 'phcoder' Serbinenko
^ permalink raw reply [flat|nested] 15+ messages in thread
* [Bugfix]
@ 2015-07-30 16:44 ` Jiang Liu
0 siblings, 0 replies; 15+ messages in thread
From: Jiang Liu @ 2015-07-30 16:44 UTC (permalink / raw)
To: Thomas Gleixner, Alexander Holler, Mark Rustad, Alex Deucher,
Joerg Roedel
Cc: Tony Luck, x86-DgEjT+Ai2ygdnm+yROfE0A,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA, Tejun Heo,
Jiang Liu
Hi Alexander, Mark, Alex,
Could you please help to apply the debug patch and send me back
the dmesg? Please also help to turn kernel paramemter "apic=debug".
Hi Mark,
It seems that this regression is caused by support of multiple-MSI,
but I have no PCI card supportting multiple-MSI at hand. So may I remotely
access your system from Intel internal network? That will definitely speed
up fix.
Thanks!
Gerry
Signed-off-by: Jiang Liu <jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
drivers/iommu/amd_iommu.c | 15 +++++++++++++--
drivers/iommu/intel_irq_remapping.c | 4 ++++
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index a57e9b749895..c039ed9333a4 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -3916,8 +3916,8 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
union irte *irte = &data->irte_entry;
struct IO_APIC_route_entry *entry;
- data->irq_2_irte.devid = devid;
- data->irq_2_irte.index = index + sub_handle;
+ irte_info->devid = devid;
+ irte_info->index = index + sub_handle;
/* Setup IRTE for IOMMU */
irte->val = 0;
@@ -3926,6 +3926,10 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
irte->fields.destination = irq_cfg->dest_apicid;
irte->fields.dm = apic->irq_dest_mode;
irte->fields.valid = 1;
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: IRTE%d vector %d APICID%d data%p cfg%p\n",
+ irte_info->index, irte->fields.vector,
+ irte->fields.destination, data, irq_cfg);
switch (info->type) {
case X86_IRQ_ALLOC_TYPE_IOAPIC:
@@ -3972,6 +3976,9 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
info->type != X86_IRQ_ALLOC_TYPE_MSIX)
return -EINVAL;
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate %d MSI IRQ, VIRQ%d\n", nr_irqs, virq);
+
/*
* With IRQ remapping enabled, don't need contiguous CPU vectors
* to support multiple MSI interrupts.
@@ -3986,6 +3993,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
if (ret < 0)
return ret;
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate parent returns %d\n", ret);
ret = -ENOMEM;
data = kzalloc(sizeof(*data), GFP_KERNEL);
@@ -4005,6 +4014,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
kfree(data);
goto out_free_parent;
}
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate IRTE index %d\n", index);
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_domain_get_irq_data(domain, virq + i);
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index f15692a410c7..bb093bc6b334 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -1234,6 +1234,8 @@ static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
MSI_ADDR_IR_SHV |
MSI_ADDR_IR_INDEX1(index) |
MSI_ADDR_IR_INDEX2(index);
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate index%d, subhandle%d, irte%llx,%llx\n", index, sub_handle, irte->high, irte->low);
break;
default:
@@ -1305,6 +1307,8 @@ static int intel_irq_remapping_alloc(struct irq_domain *domain,
kfree(data);
goto out_free_parent;
}
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate VIRQ%d, count%d, index%d\n", virq, nr_irqs, index);
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_domain_get_irq_data(domain, virq + i);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [Bugfix]
@ 2015-07-30 16:44 ` Jiang Liu
0 siblings, 0 replies; 15+ messages in thread
From: Jiang Liu @ 2015-07-30 16:44 UTC (permalink / raw)
To: Thomas Gleixner, Alexander Holler, Mark Rustad, Alex Deucher,
Joerg Roedel
Cc: Jiang Liu, Tony Luck, Tejun Heo, linux-kernel, x86, iommu
Hi Alexander, Mark, Alex,
Could you please help to apply the debug patch and send me back
the dmesg? Please also help to turn kernel paramemter "apic=debug".
Hi Mark,
It seems that this regression is caused by support of multiple-MSI,
but I have no PCI card supportting multiple-MSI at hand. So may I remotely
access your system from Intel internal network? That will definitely speed
up fix.
Thanks!
Gerry
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
---
drivers/iommu/amd_iommu.c | 15 +++++++++++++--
drivers/iommu/intel_irq_remapping.c | 4 ++++
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index a57e9b749895..c039ed9333a4 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -3916,8 +3916,8 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
union irte *irte = &data->irte_entry;
struct IO_APIC_route_entry *entry;
- data->irq_2_irte.devid = devid;
- data->irq_2_irte.index = index + sub_handle;
+ irte_info->devid = devid;
+ irte_info->index = index + sub_handle;
/* Setup IRTE for IOMMU */
irte->val = 0;
@@ -3926,6 +3926,10 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
irte->fields.destination = irq_cfg->dest_apicid;
irte->fields.dm = apic->irq_dest_mode;
irte->fields.valid = 1;
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: IRTE%d vector %d APICID%d data%p cfg%p\n",
+ irte_info->index, irte->fields.vector,
+ irte->fields.destination, data, irq_cfg);
switch (info->type) {
case X86_IRQ_ALLOC_TYPE_IOAPIC:
@@ -3972,6 +3976,9 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
info->type != X86_IRQ_ALLOC_TYPE_MSIX)
return -EINVAL;
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate %d MSI IRQ, VIRQ%d\n", nr_irqs, virq);
+
/*
* With IRQ remapping enabled, don't need contiguous CPU vectors
* to support multiple MSI interrupts.
@@ -3986,6 +3993,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
if (ret < 0)
return ret;
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate parent returns %d\n", ret);
ret = -ENOMEM;
data = kzalloc(sizeof(*data), GFP_KERNEL);
@@ -4005,6 +4014,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
kfree(data);
goto out_free_parent;
}
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate IRTE index %d\n", index);
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_domain_get_irq_data(domain, virq + i);
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index f15692a410c7..bb093bc6b334 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -1234,6 +1234,8 @@ static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
MSI_ADDR_IR_SHV |
MSI_ADDR_IR_INDEX1(index) |
MSI_ADDR_IR_INDEX2(index);
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate index%d, subhandle%d, irte%llx,%llx\n", index, sub_handle, irte->high, irte->low);
break;
default:
@@ -1305,6 +1307,8 @@ static int intel_irq_remapping_alloc(struct irq_domain *domain,
kfree(data);
goto out_free_parent;
}
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate VIRQ%d, count%d, index%d\n", virq, nr_irqs, index);
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_domain_get_irq_data(domain, virq + i);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [Bugfix]
2015-07-30 16:44 ` [Bugfix] Jiang Liu
@ 2015-07-30 16:46 ` Jiang Liu
-1 siblings, 0 replies; 15+ messages in thread
From: Jiang Liu @ 2015-07-30 16:46 UTC (permalink / raw)
To: Thomas Gleixner, Alexander Holler, Mark Rustad, Alex Deucher,
Joerg Roedel
Cc: Tejun Heo, x86-DgEjT+Ai2ygdnm+yROfE0A,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA, Tony Luck,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Hi all,
Sorry, send email too quick. Will resend with correct title.
Thanks!
Gerry
On 2015/7/31 0:44, Jiang Liu wrote:
> Hi Alexander, Mark, Alex,
> Could you please help to apply the debug patch and send me back
> the dmesg? Please also help to turn kernel paramemter "apic=debug".
>
> Hi Mark,
> It seems that this regression is caused by support of multiple-MSI,
> but I have no PCI card supportting multiple-MSI at hand. So may I remotely
> access your system from Intel internal network? That will definitely speed
> up fix.
> Thanks!
> Gerry
>
> Signed-off-by: Jiang Liu <jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> ---
> drivers/iommu/amd_iommu.c | 15 +++++++++++++--
> drivers/iommu/intel_irq_remapping.c | 4 ++++
> 2 files changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> index a57e9b749895..c039ed9333a4 100644
> --- a/drivers/iommu/amd_iommu.c
> +++ b/drivers/iommu/amd_iommu.c
> @@ -3916,8 +3916,8 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
> union irte *irte = &data->irte_entry;
> struct IO_APIC_route_entry *entry;
>
> - data->irq_2_irte.devid = devid;
> - data->irq_2_irte.index = index + sub_handle;
> + irte_info->devid = devid;
> + irte_info->index = index + sub_handle;
>
> /* Setup IRTE for IOMMU */
> irte->val = 0;
> @@ -3926,6 +3926,10 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
> irte->fields.destination = irq_cfg->dest_apicid;
> irte->fields.dm = apic->irq_dest_mode;
> irte->fields.valid = 1;
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: IRTE%d vector %d APICID%d data%p cfg%p\n",
> + irte_info->index, irte->fields.vector,
> + irte->fields.destination, data, irq_cfg);
>
> switch (info->type) {
> case X86_IRQ_ALLOC_TYPE_IOAPIC:
> @@ -3972,6 +3976,9 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> info->type != X86_IRQ_ALLOC_TYPE_MSIX)
> return -EINVAL;
>
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate %d MSI IRQ, VIRQ%d\n", nr_irqs, virq);
> +
> /*
> * With IRQ remapping enabled, don't need contiguous CPU vectors
> * to support multiple MSI interrupts.
> @@ -3986,6 +3993,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
> if (ret < 0)
> return ret;
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate parent returns %d\n", ret);
>
> ret = -ENOMEM;
> data = kzalloc(sizeof(*data), GFP_KERNEL);
> @@ -4005,6 +4014,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> kfree(data);
> goto out_free_parent;
> }
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate IRTE index %d\n", index);
>
> for (i = 0; i < nr_irqs; i++) {
> irq_data = irq_domain_get_irq_data(domain, virq + i);
> diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
> index f15692a410c7..bb093bc6b334 100644
> --- a/drivers/iommu/intel_irq_remapping.c
> +++ b/drivers/iommu/intel_irq_remapping.c
> @@ -1234,6 +1234,8 @@ static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
> MSI_ADDR_IR_SHV |
> MSI_ADDR_IR_INDEX1(index) |
> MSI_ADDR_IR_INDEX2(index);
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate index%d, subhandle%d, irte%llx,%llx\n", index, sub_handle, irte->high, irte->low);
> break;
>
> default:
> @@ -1305,6 +1307,8 @@ static int intel_irq_remapping_alloc(struct irq_domain *domain,
> kfree(data);
> goto out_free_parent;
> }
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate VIRQ%d, count%d, index%d\n", virq, nr_irqs, index);
>
> for (i = 0; i < nr_irqs; i++) {
> irq_data = irq_domain_get_irq_data(domain, virq + i);
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [Bugfix]
@ 2015-07-30 16:46 ` Jiang Liu
0 siblings, 0 replies; 15+ messages in thread
From: Jiang Liu @ 2015-07-30 16:46 UTC (permalink / raw)
To: Thomas Gleixner, Alexander Holler, Mark Rustad, Alex Deucher,
Joerg Roedel
Cc: Tony Luck, Tejun Heo, linux-kernel, x86, iommu
Hi all,
Sorry, send email too quick. Will resend with correct title.
Thanks!
Gerry
On 2015/7/31 0:44, Jiang Liu wrote:
> Hi Alexander, Mark, Alex,
> Could you please help to apply the debug patch and send me back
> the dmesg? Please also help to turn kernel paramemter "apic=debug".
>
> Hi Mark,
> It seems that this regression is caused by support of multiple-MSI,
> but I have no PCI card supportting multiple-MSI at hand. So may I remotely
> access your system from Intel internal network? That will definitely speed
> up fix.
> Thanks!
> Gerry
>
> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
> ---
> drivers/iommu/amd_iommu.c | 15 +++++++++++++--
> drivers/iommu/intel_irq_remapping.c | 4 ++++
> 2 files changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> index a57e9b749895..c039ed9333a4 100644
> --- a/drivers/iommu/amd_iommu.c
> +++ b/drivers/iommu/amd_iommu.c
> @@ -3916,8 +3916,8 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
> union irte *irte = &data->irte_entry;
> struct IO_APIC_route_entry *entry;
>
> - data->irq_2_irte.devid = devid;
> - data->irq_2_irte.index = index + sub_handle;
> + irte_info->devid = devid;
> + irte_info->index = index + sub_handle;
>
> /* Setup IRTE for IOMMU */
> irte->val = 0;
> @@ -3926,6 +3926,10 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
> irte->fields.destination = irq_cfg->dest_apicid;
> irte->fields.dm = apic->irq_dest_mode;
> irte->fields.valid = 1;
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: IRTE%d vector %d APICID%d data%p cfg%p\n",
> + irte_info->index, irte->fields.vector,
> + irte->fields.destination, data, irq_cfg);
>
> switch (info->type) {
> case X86_IRQ_ALLOC_TYPE_IOAPIC:
> @@ -3972,6 +3976,9 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> info->type != X86_IRQ_ALLOC_TYPE_MSIX)
> return -EINVAL;
>
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate %d MSI IRQ, VIRQ%d\n", nr_irqs, virq);
> +
> /*
> * With IRQ remapping enabled, don't need contiguous CPU vectors
> * to support multiple MSI interrupts.
> @@ -3986,6 +3993,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
> if (ret < 0)
> return ret;
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate parent returns %d\n", ret);
>
> ret = -ENOMEM;
> data = kzalloc(sizeof(*data), GFP_KERNEL);
> @@ -4005,6 +4014,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> kfree(data);
> goto out_free_parent;
> }
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate IRTE index %d\n", index);
>
> for (i = 0; i < nr_irqs; i++) {
> irq_data = irq_domain_get_irq_data(domain, virq + i);
> diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
> index f15692a410c7..bb093bc6b334 100644
> --- a/drivers/iommu/intel_irq_remapping.c
> +++ b/drivers/iommu/intel_irq_remapping.c
> @@ -1234,6 +1234,8 @@ static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
> MSI_ADDR_IR_SHV |
> MSI_ADDR_IR_INDEX1(index) |
> MSI_ADDR_IR_INDEX2(index);
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate index%d, subhandle%d, irte%llx,%llx\n", index, sub_handle, irte->high, irte->low);
> break;
>
> default:
> @@ -1305,6 +1307,8 @@ static int intel_irq_remapping_alloc(struct irq_domain *domain,
> kfree(data);
> goto out_free_parent;
> }
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate VIRQ%d, count%d, index%d\n", virq, nr_irqs, index);
>
> for (i = 0; i < nr_irqs; i++) {
> irq_data = irq_domain_get_irq_data(domain, virq + i);
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [Bugfix]
2015-07-30 16:44 ` [Bugfix] Jiang Liu
@ 2015-07-30 18:34 ` Alex Deucher
-1 siblings, 0 replies; 15+ messages in thread
From: Alex Deucher @ 2015-07-30 18:34 UTC (permalink / raw)
To: Jiang Liu
Cc: Tony Luck, x86-DgEjT+Ai2ygdnm+yROfE0A, LKML,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA, Tejun Heo,
Alexander Holler, Thomas Gleixner, Mark Rustad
[-- Attachment #1: Type: text/plain, Size: 4559 bytes --]
On Thu, Jul 30, 2015 at 12:44 PM, Jiang Liu <jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> wrote:
> Hi Alexander, Mark, Alex,
> Could you please help to apply the debug patch and send me back
> the dmesg? Please also help to turn kernel paramemter "apic=debug".
See attached.
Thanks,
Alex
>
> Hi Mark,
> It seems that this regression is caused by support of multiple-MSI,
> but I have no PCI card supportting multiple-MSI at hand. So may I remotely
> access your system from Intel internal network? That will definitely speed
> up fix.
> Thanks!
> Gerry
>
> Signed-off-by: Jiang Liu <jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> ---
> drivers/iommu/amd_iommu.c | 15 +++++++++++++--
> drivers/iommu/intel_irq_remapping.c | 4 ++++
> 2 files changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> index a57e9b749895..c039ed9333a4 100644
> --- a/drivers/iommu/amd_iommu.c
> +++ b/drivers/iommu/amd_iommu.c
> @@ -3916,8 +3916,8 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
> union irte *irte = &data->irte_entry;
> struct IO_APIC_route_entry *entry;
>
> - data->irq_2_irte.devid = devid;
> - data->irq_2_irte.index = index + sub_handle;
> + irte_info->devid = devid;
> + irte_info->index = index + sub_handle;
>
> /* Setup IRTE for IOMMU */
> irte->val = 0;
> @@ -3926,6 +3926,10 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
> irte->fields.destination = irq_cfg->dest_apicid;
> irte->fields.dm = apic->irq_dest_mode;
> irte->fields.valid = 1;
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: IRTE%d vector %d APICID%d data%p cfg%p\n",
> + irte_info->index, irte->fields.vector,
> + irte->fields.destination, data, irq_cfg);
>
> switch (info->type) {
> case X86_IRQ_ALLOC_TYPE_IOAPIC:
> @@ -3972,6 +3976,9 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> info->type != X86_IRQ_ALLOC_TYPE_MSIX)
> return -EINVAL;
>
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate %d MSI IRQ, VIRQ%d\n", nr_irqs, virq);
> +
> /*
> * With IRQ remapping enabled, don't need contiguous CPU vectors
> * to support multiple MSI interrupts.
> @@ -3986,6 +3993,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
> if (ret < 0)
> return ret;
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate parent returns %d\n", ret);
>
> ret = -ENOMEM;
> data = kzalloc(sizeof(*data), GFP_KERNEL);
> @@ -4005,6 +4014,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> kfree(data);
> goto out_free_parent;
> }
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate IRTE index %d\n", index);
>
> for (i = 0; i < nr_irqs; i++) {
> irq_data = irq_domain_get_irq_data(domain, virq + i);
> diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
> index f15692a410c7..bb093bc6b334 100644
> --- a/drivers/iommu/intel_irq_remapping.c
> +++ b/drivers/iommu/intel_irq_remapping.c
> @@ -1234,6 +1234,8 @@ static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
> MSI_ADDR_IR_SHV |
> MSI_ADDR_IR_INDEX1(index) |
> MSI_ADDR_IR_INDEX2(index);
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate index%d, subhandle%d, irte%llx,%llx\n", index, sub_handle, irte->high, irte->low);
> break;
>
> default:
> @@ -1305,6 +1307,8 @@ static int intel_irq_remapping_alloc(struct irq_domain *domain,
> kfree(data);
> goto out_free_parent;
> }
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate VIRQ%d, count%d, index%d\n", virq, nr_irqs, index);
>
> for (i = 0; i < nr_irqs; i++) {
> irq_data = irq_domain_get_irq_data(domain, virq + i);
> --
> 1.7.10.4
>
[-- Attachment #2: dmesg.apic-debug --]
[-- Type: application/octet-stream, Size: 74262 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0-rc3+ (alex@cm) (gcc version 4.8.3 20140624 (Red Hat 4.8.3-1) (GCC) ) #801 SMP Thu Jul 30 14:05:58 EDT 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-rc3+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root LANG=en_US.UTF-8 modprobe.blacklist=amdgpu,radeon apic=debug 3
[ 0.000000] tseg: 007f800000
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007bc3afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bc3b000-0x000000007bc6afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bc6b000-0x000000007bf29fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bf2a000-0x000000007bfe5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007bfe6000-0x000000007e10afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007e10b000-0x000000007e10bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007e10c000-0x000000007e311fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007e312000-0x000000007e467fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007e468000-0x000000007f02efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f02f000-0x000000007f071fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f072000-0x000000007f7f0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f7f1000-0x000000007f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A88X Extreme6+, BIOS P2.70 01/15/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 00007F800000 mask FFFFFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000043f000000 aka 17392M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x7f800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000fd8a0-0x000fd8af] mapped at [ffff8800000fd8a0]
[ 0.000000] mpc: fd560-fd824
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02019000, 0x02019fff] PGTABLE
[ 0.000000] BRK [0x0201a000, 0x0201afff] PGTABLE
[ 0.000000] BRK [0x0201b000, 0x0201bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43ee00000-0x43effffff]
[ 0.000000] [mem 0x43ee00000-0x43effffff] page 2M
[ 0.000000] BRK [0x0201c000, 0x0201cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x420000000-0x43edfffff]
[ 0.000000] [mem 0x420000000-0x43edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41fffffff]
[ 0.000000] [mem 0x400000000-0x41fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bc3afff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bbfffff] page 2M
[ 0.000000] [mem 0x7bc00000-0x7bc3afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7bc6b000-0x7bf29fff]
[ 0.000000] [mem 0x7bc6b000-0x7bf29fff] page 4k
[ 0.000000] BRK [0x0201d000, 0x0201dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7e10b000-0x7e10bfff]
[ 0.000000] [mem 0x7e10b000-0x7e10bfff] page 4k
[ 0.000000] BRK [0x0201e000, 0x0201efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7e312000-0x7e467fff]
[ 0.000000] [mem 0x7e312000-0x7e467fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7f02f000-0x7f071fff]
[ 0.000000] [mem 0x7f02f000-0x7f071fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7f7f1000-0x7f7fffff]
[ 0.000000] [mem 0x7f7f1000-0x7f7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x34dec000-0x366edfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000007BFAE080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007BFB40E8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150619/tbfadt-654)
[ 0.000000] ACPI: DSDT 0x000000007BFAE190 005F58 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000007BFDC080 000040
[ 0.000000] ACPI: APIC 0x000000007BFB41F8 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007BFB4278 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007BFB42C0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000007BFB4300 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: AAFT 0x000000007BFB4338 0002F5 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: IVRS 0x000000007BFB4630 000078 (v02 AMD BANTRY 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x000000007BFB46A8 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000007BFB5248 00033B (v02 AMD BANTRY 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000007BFB5588 0005A0 (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000007BFB5B28 001115 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43efe6000-0x43eff9fff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007bc3afff]
[ 0.000000] node 0: [mem 0x000000007bc6b000-0x000000007bf29fff]
[ 0.000000] node 0: [mem 0x000000007e10b000-0x000000007e10bfff]
[ 0.000000] node 0: [mem 0x000000007e312000-0x000000007e467fff]
[ 0.000000] node 0: [mem 0x000000007f02f000-0x000000007f071fff]
[ 0.000000] node 0: [mem 0x000000007f7f1000-0x000000007f7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
[ 0.000000] On node 0 totalpages: 3911744
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7875 pages used for memmap
[ 0.000000] DMA32 zone: 503971 pages, LIFO batch:31
[ 0.000000] Normal zone: 53184 pages used for memmap
[ 0.000000] Normal zone: 3403776 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 5, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 5, APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 5, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 5, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 5, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 5, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 5, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 5, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 5, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 5, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 5, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 5, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 5, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 5, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 5, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffffffff5f8000 (fec01000)
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bc3b000-0x7bc6afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bf2a000-0x7bfe5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bfe6000-0x7e10afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7e10c000-0x7e311fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7e468000-0x7f02efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f072000-0x7f7f0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0x7f800000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88043ec00000 s95512 r8192 d31464 u524288
[ 0.000000] pcpu-alloc: s95512 r8192 d31464 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3850600
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-rc3+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root LANG=en_US.UTF-8 modprobe.blacklist=amdgpu,radeon apic=debug 3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 15292176K/15646976K available (7209K kernel code, 1204K rwdata, 3220K rodata, 1520K init, 1428K bss, 354800K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1000 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 3693.296 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 7386.59 BogoMIPS (lpj=3693296)
[ 0.000188] pid_max: default: 32768 minimum: 301
[ 0.000274] ACPI: Core revision 20150619
[ 0.003550] ACPI: All ACPI Tables successfully acquired
[ 0.003697] Security Framework initialized
[ 0.003778] SELinux: Initializing.
[ 0.003863] SELinux: Starting in permissive mode
[ 0.004842] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.009398] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011476] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.011577] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.012003] Initializing cgroup subsys blkio
[ 0.012089] Initializing cgroup subsys devices
[ 0.012172] Initializing cgroup subsys freezer
[ 0.012255] Initializing cgroup subsys net_cls
[ 0.012338] Initializing cgroup subsys perf_event
[ 0.012450] CPU: Physical Processor ID: 0
[ 0.012531] CPU: Processor Core ID: 0
[ 0.012613] mce: CPU supports 7 MCE banks
[ 0.012699] LVT offset 1 assigned for vector 0xf9
[ 0.012785] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.012868] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.013050] Freeing SMP alternatives memory: 28K (ffffffff81eab000 - ffffffff81eb2000)
[ 0.021644] ftrace: allocating 27833 entries in 109 pages
[ 0.110488] enabled ExtINT on CPU#0
[ 0.110799] ENABLING IO-APIC IRQs
[ 0.110882] init IO_APIC IRQs
[ 0.110883] apic 5 pin 0 not connected
[ 0.110895] IOAPIC[0]: Set routing entry (5-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.110899] IOAPIC[0]: Set routing entry (5-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.110903] IOAPIC[0]: Set routing entry (5-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.110905] IOAPIC[0]: Set routing entry (5-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.110908] IOAPIC[0]: Set routing entry (5-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1)
[ 0.110911] IOAPIC[0]: Set routing entry (5-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.110913] IOAPIC[0]: Set routing entry (5-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.110916] IOAPIC[0]: Set routing entry (5-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.110919] IOAPIC[0]: Set routing entry (5-9 -> 0x39 -> IRQ 9 Mode:1 Active:1 Dest:1)
[ 0.110921] IOAPIC[0]: Set routing entry (5-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1)
[ 0.110924] IOAPIC[0]: Set routing entry (5-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1)
[ 0.110927] IOAPIC[0]: Set routing entry (5-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.110929] IOAPIC[0]: Set routing entry (5-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.110936] IOAPIC[0]: Set routing entry (5-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.110940] IOAPIC[0]: Set routing entry (5-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.110941] apic 5 pin 16 not connected
[ 0.110942] apic 5 pin 17 not connected
[ 0.110942] apic 5 pin 18 not connected
[ 0.110943] apic 5 pin 19 not connected
[ 0.110944] apic 5 pin 20 not connected
[ 0.110944] apic 5 pin 21 not connected
[ 0.110945] apic 5 pin 22 not connected
[ 0.110946] apic 5 pin 23 not connected
[ 0.110946] apic 6 pin 0 not connected
[ 0.110947] apic 6 pin 1 not connected
[ 0.110948] apic 6 pin 2 not connected
[ 0.110948] apic 6 pin 3 not connected
[ 0.110949] apic 6 pin 4 not connected
[ 0.110950] apic 6 pin 5 not connected
[ 0.110950] apic 6 pin 6 not connected
[ 0.110951] apic 6 pin 7 not connected
[ 0.110952] apic 6 pin 8 not connected
[ 0.110952] apic 6 pin 9 not connected
[ 0.110953] apic 6 pin 10 not connected
[ 0.110954] apic 6 pin 11 not connected
[ 0.110954] apic 6 pin 12 not connected
[ 0.110955] apic 6 pin 13 not connected
[ 0.110956] apic 6 pin 14 not connected
[ 0.110956] apic 6 pin 15 not connected
[ 0.110957] apic 6 pin 16 not connected
[ 0.110957] apic 6 pin 17 not connected
[ 0.110958] apic 6 pin 18 not connected
[ 0.110959] apic 6 pin 19 not connected
[ 0.110959] apic 6 pin 20 not connected
[ 0.110960] apic 6 pin 21 not connected
[ 0.110961] apic 6 pin 22 not connected
[ 0.110961] apic 6 pin 23 not connected
[ 0.110962] apic 6 pin 24 not connected
[ 0.110963] apic 6 pin 25 not connected
[ 0.110963] apic 6 pin 26 not connected
[ 0.110964] apic 6 pin 27 not connected
[ 0.110964] apic 6 pin 28 not connected
[ 0.110965] apic 6 pin 29 not connected
[ 0.110966] apic 6 pin 30 not connected
[ 0.110966] apic 6 pin 31 not connected
[ 0.111096] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.121173] Using local APIC timer interrupts.
calibrating APIC timer ...
[ 0.223164] ... lapic delta = 623857
[ 0.223245] ... PM-Timer delta = 357950
[ 0.223326] ... PM-Timer result ok
[ 0.223407] ..... delta 623857
[ 0.223488] ..... mult: 26794454
[ 0.223568] ..... calibration result: 99817
[ 0.223650] ..... CPU clock speed is 3693.0231 MHz.
[ 0.223732] ..... host bus clock speed is 99.0817 MHz.
[ 0.223819] smpboot: CPU0: AMD A10-7850K APU with Radeon(TM) R7 Graphics (fam: 15, model: 30, stepping: 01)
[ 0.224054] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.224218] ... version: 0
[ 0.224299] ... bit width: 48
[ 0.224381] ... generic registers: 6
[ 0.224462] ... value mask: 0000ffffffffffff
[ 0.224544] ... max period: 00007fffffffffff
[ 0.224626] ... fixed-purpose events: 0
[ 0.224708] ... event mask: 000000000000003f
[ 0.225326] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.225527] x86: Booting SMP configuration:
[ 0.225610] .... node #0, CPUs: #1
[ 0.226708] masked ExtINT on CPU#1
[ 0.228903] #2
[ 0.230108] masked ExtINT on CPU#2
[ 0.233357] #3
[ 0.233357] masked ExtINT on CPU#3
[ 0.235465] x86: Booted up 1 node, 4 CPUs
[ 0.235709] smpboot: Total of 4 processors activated (29546.36 BogoMIPS)
[ 0.236502] devtmpfs: initialized
[ 0.236815] PM: Registering ACPI NVS region [mem 0x7bf2a000-0x7bfe5fff] (770048 bytes)
[ 0.236957] PM: Registering ACPI NVS region [mem 0x7e10c000-0x7e311fff] (2121728 bytes)
[ 0.237172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.237381] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.237462] pinctrl core: initialized pinctrl subsystem
[ 0.237582] RTC time: 18:20:22, date: 07/30/15
[ 0.237760] NET: Registered protocol family 16
[ 0.241880] cpuidle: using governor ladder
[ 0.245875] cpuidle: using governor menu
[ 0.246081] ACPI: bus type PCI registered
[ 0.246164] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.246327] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.246466] PCI: not using MMCONFIG
[ 0.246547] PCI: Using configuration type 1 for base access
[ 0.246629] PCI: Using configuration type 1 for extended access
[ 0.251231] ACPI: Added _OSI(Module Device)
[ 0.251317] ACPI: Added _OSI(Processor Device)
[ 0.251399] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.251480] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.252856] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.255027] ACPI: Interpreter enabled
[ 0.255115] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.255303] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.255499] ACPI: (supports S0 S3 S4 S5)
[ 0.255578] ACPI: Using IOAPIC for interrupt routing
[ 0.255674] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.255839] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.255999] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.260206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.260296] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.260582] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.260947] PCI host bridge to bus 0000:00
[ 0.261039] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.261122] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.261212] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.261295] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.261378] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.261462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.261600] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.261738] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.261883] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[ 0.261971] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
[ 0.262057] pci 0000:00:01.0: [1002:130f] type 00 class 0x030000
[ 0.262072] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.262078] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 0.262082] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.262086] pci 0000:00:01.0: reg 0x24: [mem 0xff700000-0xff73ffff]
[ 0.262090] pci 0000:00:01.0: reg 0x30: [mem 0xff740000-0xff75ffff pref]
[ 0.262105] pci 0000:00:01.0: supports D1 D2
[ 0.262106] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.262168] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
[ 0.262188] pci 0000:00:01.1: reg 0x10: [mem 0xff764000-0xff767fff 64bit]
[ 0.262213] pci 0000:00:01.1: supports D1 D2
[ 0.262271] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[ 0.262339] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[ 0.262408] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[ 0.262496] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.262530] pci 0000:00:10.0: reg 0x10: [mem 0xff76a000-0xff76bfff 64bit]
[ 0.262594] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.262632] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.262756] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[ 0.262793] pci 0000:00:10.1: reg 0x10: [mem 0xff768000-0xff769fff 64bit]
[ 0.262857] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.262895] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.263023] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.263043] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
[ 0.263050] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
[ 0.263057] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
[ 0.263065] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
[ 0.263072] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
[ 0.263079] pci 0000:00:11.0: reg 0x24: [mem 0xff771000-0xff7717ff]
[ 0.263152] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.263164] pci 0000:00:12.0: reg 0x10: [mem 0xff770000-0xff770fff]
[ 0.263239] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.263356] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.263375] pci 0000:00:12.2: reg 0x10: [mem 0xff76f000-0xff76f0ff]
[ 0.263426] pci 0000:00:12.2: supports D1 D2
[ 0.263427] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.263458] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.263575] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.263587] pci 0000:00:13.0: reg 0x10: [mem 0xff76e000-0xff76efff]
[ 0.263656] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.263777] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.263798] pci 0000:00:13.2: reg 0x10: [mem 0xff76d000-0xff76d0ff]
[ 0.263849] pci 0000:00:13.2: supports D1 D2
[ 0.263850] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.263881] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.264008] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.264103] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
[ 0.264115] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
[ 0.264122] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
[ 0.264129] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
[ 0.264136] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
[ 0.264143] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
[ 0.264159] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.264249] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.264333] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.264416] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.264555] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.264576] pci 0000:00:14.2: reg 0x10: [mem 0xff760000-0xff763fff 64bit]
[ 0.264619] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.264649] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.264762] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.264878] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.264933] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.265051] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.265063] pci 0000:00:14.5: reg 0x10: [mem 0xff76c000-0xff76cfff]
[ 0.265131] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.265260] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.265309] pci 0000:00:15.0: supports D1 D2
[ 0.265310] pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
[ 0.265344] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.265461] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.265509] pci 0000:00:15.2: supports D1 D2
[ 0.265510] pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
[ 0.265542] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.265659] pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400
[ 0.265707] pci 0000:00:15.3: supports D1 D2
[ 0.265708] pci 0000:00:15.3: PME# supported from D0 D3hot D3cold
[ 0.265740] pci 0000:00:15.3: System wakeup disabled by ACPI
[ 0.265863] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[ 0.265922] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[ 0.265981] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[ 0.266034] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[ 0.266087] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[ 0.266139] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[ 0.266281] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.266370] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.266372] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.266373] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.266375] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.266376] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.266378] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.266379] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.266418] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.266560] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.266601] pci 0000:03:00.0: reg 0x10: [mem 0xff600000-0xff607fff 64bit]
[ 0.266693] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.267862] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 0.267956] pci 0000:00:15.2: bridge window [mem 0xff600000-0xff6fffff]
[ 0.268044] pci 0000:04:00.0: [1969:10a1] type 00 class 0x020000
[ 0.268090] pci 0000:04:00.0: reg 0x10: [mem 0xff500000-0xff53ffff 64bit]
[ 0.268102] pci 0000:04:00.0: reg 0x18: [io 0xe000-0xe07f]
[ 0.268183] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.269862] pci 0000:00:15.3: PCI bridge to [bus 04]
[ 0.269952] pci 0000:00:15.3: bridge window [io 0xe000-0xefff]
[ 0.269956] pci 0000:00:15.3: bridge window [mem 0xff500000-0xff5fffff]
[ 0.270402] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
[ 0.270769] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
[ 0.271136] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 *10 11 14 15)
[ 0.271501] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 7 10 11 14 15)
[ 0.271854] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.272239] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.272607] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.272984] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.273583] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.273664] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.273807] vgaarb: loaded
[ 0.273887] vgaarb: bridge control possible 0000:00:01.0
[ 0.274043] SCSI subsystem initialized
[ 0.274216] libata version 3.00 loaded.
[ 0.274257] ACPI: bus type USB registered
[ 0.274354] usbcore: registered new interface driver usbfs
[ 0.274442] usbcore: registered new interface driver hub
[ 0.274533] usbcore: registered new device driver usb
[ 0.274724] PCI: Using ACPI for IRQ routing
[ 0.281308] PCI: pci_cache_line_size set to 64 bytes
[ 0.281366] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.281367] e820: reserve RAM buffer [mem 0x7bc3b000-0x7bffffff]
[ 0.281368] e820: reserve RAM buffer [mem 0x7bf2a000-0x7bffffff]
[ 0.281369] e820: reserve RAM buffer [mem 0x7e10c000-0x7fffffff]
[ 0.281370] e820: reserve RAM buffer [mem 0x7e468000-0x7fffffff]
[ 0.281372] e820: reserve RAM buffer [mem 0x7f072000-0x7fffffff]
[ 0.281372] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
[ 0.281374] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[ 0.281486] NetLabel: Initializing
[ 0.281568] NetLabel: domain hash size = 128
[ 0.281649] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.281738] NetLabel: unlabeled traffic allowed by default
[ 0.281886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.282080] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.284231] clocksource: Switched to clocksource hpet
[ 0.291143] pnp: PnP ACPI init
[ 0.291353] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.291435] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.291494] system 00:01: [mem 0x80000000-0xbfffffff] has been reserved
[ 0.291576] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291632] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.291713] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291808] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.291889] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291986] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292010] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.292056] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.292137] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292170] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.292314] pnp 00:08: [dma 0 disabled]
[ 0.292350] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.292532] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.292615] system 00:09: [io 0x040b] has been reserved
[ 0.292698] system 00:09: [io 0x04d6] has been reserved
[ 0.292782] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.292864] system 00:09: [io 0x0c14] has been reserved
[ 0.294741] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.294824] system 00:09: [io 0x0c52] has been reserved
[ 0.294907] system 00:09: [io 0x0c6c] has been reserved
[ 0.294990] system 00:09: [io 0x0c6f] has been reserved
[ 0.295072] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.295155] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.295242] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.295326] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.295409] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.295493] system 00:09: [io 0x0800-0x089f] could not be reserved
[ 0.295576] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.295660] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.295742] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.295825] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.295908] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.295992] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.296075] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.296158] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.296246] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.296329] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.296413] system 00:09: [mem 0xff800000-0xffffffff] has been reserved
[ 0.296497] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296633] pnp: PnP ACPI: found 10 devices
[ 0.303201] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.303365] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.303454] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.303539] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 0.303621] pci 0000:00:15.2: bridge window [mem 0xff600000-0xff6fffff]
[ 0.303706] pci 0000:00:15.3: PCI bridge to [bus 04]
[ 0.303786] pci 0000:00:15.3: bridge window [io 0xe000-0xefff]
[ 0.303869] pci 0000:00:15.3: bridge window [mem 0xff500000-0xff5fffff]
[ 0.303954] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.303956] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.303957] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.303958] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.303960] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.303961] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.303963] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.303965] pci_bus 0000:01: resource 4 [io 0x0000-0x03af window]
[ 0.303966] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.303967] pci_bus 0000:01: resource 6 [io 0x03b0-0x03df window]
[ 0.303968] pci_bus 0000:01: resource 7 [io 0x0d00-0xffff window]
[ 0.303970] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.303971] pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.303972] pci_bus 0000:01: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.303974] pci_bus 0000:03: resource 1 [mem 0xff600000-0xff6fffff]
[ 0.303975] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.303976] pci_bus 0000:04: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.304004] NET: Registered protocol family 2
[ 0.304309] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.304729] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305040] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.305169] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.305343] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.305547] NET: Registered protocol family 1
[ 0.305644] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.305735] IOAPIC[0]: Set routing entry (5-18 -> 0x41 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.305854] IOAPIC[0]: Set routing entry (5-17 -> 0x51 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 0.305961] IOAPIC[0]: Set routing entry (5-18 -> 0x61 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.378419] IOAPIC[0]: Set routing entry (5-17 -> 0x71 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 0.389415] IOAPIC[0]: Set routing entry (5-18 -> 0x81 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.461346] IOAPIC[0]: Set routing entry (5-17 -> 0x91 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 0.472346] IOAPIC[0]: Set routing entry (5-18 -> 0xa1 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.544279] IOAPIC[0]: Set routing entry (5-16 -> 0xb1 -> IRQ 16 Mode:1 Active:1 Dest:15)
[ 0.544304] IOAPIC[0]: Set routing entry (5-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.544352] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.544439] PCI: CLS 64 bytes, default 64
[ 0.544503] Unpacking initramfs...
[ 0.868084] Freeing initrd memory: 25608K (ffff880034dec000 - ffff8800366ee000)
[ 0.868269] AMD-Vi: IOMMU performance counters supported
[ 0.868472] ERROR: Unable to locate IOAPIC for GSI 56
[ 0.868554] pci 0000:00:00.2: PCI INT A: failed to register GSI
[ 0.869454] iommu: Adding device 0000:00:00.0 to group 0
[ 0.869902] iommu: Adding device 0000:00:01.0 to group 1
[ 0.869994] iommu: Using direct mapping for device 0000:00:01.0
[ 0.870089] iommu: Adding device 0000:00:01.1 to group 1
[ 0.870468] iommu: Adding device 0000:00:02.0 to group 2
[ 0.870910] iommu: Adding device 0000:00:03.0 to group 3
[ 0.871330] iommu: Adding device 0000:00:04.0 to group 4
[ 0.871765] iommu: Adding device 0000:00:10.0 to group 5
[ 0.871861] iommu: Adding device 0000:00:10.1 to group 5
[ 0.872276] iommu: Adding device 0000:00:11.0 to group 6
[ 0.872707] iommu: Adding device 0000:00:12.0 to group 7
[ 0.872801] iommu: Adding device 0000:00:12.2 to group 7
[ 0.873225] iommu: Adding device 0000:00:13.0 to group 8
[ 0.873318] iommu: Adding device 0000:00:13.2 to group 8
[ 0.873761] iommu: Adding device 0000:00:14.0 to group 9
[ 0.873856] iommu: Adding device 0000:00:14.1 to group 9
[ 0.873948] iommu: Adding device 0000:00:14.2 to group 9
[ 0.874040] iommu: Adding device 0000:00:14.3 to group 9
[ 0.874468] iommu: Adding device 0000:00:14.4 to group 10
[ 0.874888] iommu: Adding device 0000:00:14.5 to group 11
[ 0.875319] iommu: Adding device 0000:00:15.0 to group 12
[ 0.875417] iommu: Adding device 0000:00:15.2 to group 12
[ 0.875518] iommu: Adding device 0000:00:15.3 to group 12
[ 0.875964] iommu: Adding device 0000:00:18.0 to group 13
[ 0.876062] iommu: Adding device 0000:00:18.1 to group 13
[ 0.876159] iommu: Adding device 0000:00:18.2 to group 13
[ 0.876255] iommu: Adding device 0000:00:18.3 to group 13
[ 0.876350] iommu: Adding device 0000:00:18.4 to group 13
[ 0.876446] iommu: Adding device 0000:00:18.5 to group 13
[ 0.876541] iommu: Adding device 0000:03:00.0 to group 12
[ 0.876636] iommu: Adding device 0000:04:00.0 to group 12
[ 0.876735] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.876827] AMD-Vi: Extended features: PPR GT IA PC
[ 0.877041] AMD-Vi: Interrupt remapping enabled
[ 0.877324] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.879466] perf: AMD NB counters detected
[ 0.879570] perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
[ 0.879679] LVT offset 0 assigned for vector 0x400
[ 0.879772] perf: AMD IBS detected (0x000001ff)
[ 0.880408] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.880510] Initialise system trusted keyring
[ 0.880608] audit: initializing netlink subsys (disabled)
[ 0.880719] audit: type=2000 audit(1438280421.689:1): initialized
[ 0.881099] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.882750] VFS: Disk quotas dquot_6.6.0
[ 0.882859] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.883316] SELinux: Registering netfilter hooks
[ 0.886616] NET: Registered protocol family 38
[ 0.886720] Key type asymmetric registered
[ 0.886802] Asymmetric key parser 'x509' registered
[ 0.886910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.887096] io scheduler noop registered
[ 0.887182] io scheduler deadline registered
[ 0.887308] io scheduler cfq registered (default)
[ 0.887583] irqdomain: allocate 1 MSI IRQ, VIRQ25
[ 0.887683] irqdomain: allocate parent returns 0
[ 0.887772] irqdomain: allocate IRTE index 0
[ 0.887852] irqdomain: IRTE0 vector 225 APICID15 dataffff88042855a460 cfgffff8804285b0240
[ 0.888044] irqdomain: allocate 1 MSI IRQ, VIRQ26
[ 0.888124] irqdomain: allocate parent returns 0
[ 0.888205] irqdomain: allocate IRTE index 0
[ 0.888285] irqdomain: IRTE0 vector 34 APICID15 dataffff88042855a520 cfgffff8804285b0280
[ 0.888509] irqdomain: allocate 1 MSI IRQ, VIRQ27
[ 0.888589] irqdomain: allocate parent returns 0
[ 0.888690] irqdomain: allocate IRTE index 0
[ 0.888775] irqdomain: IRTE0 vector 66 APICID15 dataffff88042855a5e0 cfgffff8804285b02c0
[ 0.888983] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 0.889065] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 0.889082] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[ 0.889163] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.889245] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[ 0.889262] pcieport 0000:00:15.3: Signaling PME through PCIe PME interrupt
[ 0.889349] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.889430] pcie_pme 0000:00:15.3:pcie01: service driver pcie_pme loaded
[ 0.889435] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.889519] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.889704] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.889843] ACPI: Power Button [PWRB]
[ 0.889954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.890088] ACPI: Power Button [PWRF]
[ 0.890199] ACPI: acpi_idle registered with cpuidle
[ 0.890658] GHES: HEST is not enabled!
[ 0.890863] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.911466] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.912139] Non-volatile memory driver v1.3
[ 0.912248] Linux agpgart interface v0.103
[ 0.913652] loop: module loaded
[ 0.913839] ahci 0000:00:11.0: version 3.0
[ 0.913914] IOAPIC[0]: Set routing entry (5-19 -> 0x52 -> IRQ 19 Mode:1 Active:1 Dest:15)
[ 0.913954] irqdomain: allocate 4 MSI IRQ, VIRQ28
[ 0.914038] irqdomain: allocate parent returns 0
[ 0.914123] irqdomain: allocate IRTE index 0
[ 0.914205] irqdomain: IRTE0 vector 98 APICID15 dataffff8804285ee780 cfgffff880076e2d2c0
[ 0.914348] irqdomain: IRTE1 vector 114 APICID15 dataffff8804285ee7e0 cfgffff880076e2d300
[ 0.914485] irqdomain: IRTE2 vector 130 APICID15 dataffff8804285ee800 cfgffff880076e2d340
[ 0.914622] irqdomain: IRTE3 vector 146 APICID15 dataffff8804285ee820 cfgffff880076e2d380
[ 0.914822] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.914960] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
[ 0.915472] scsi host0: ahci
[ 0.915655] scsi host1: ahci
[ 0.915772] ata1: SATA max UDMA/133 abar m2048@0xff771000 port 0xff771100 irq 28
[ 0.915912] ata2: SATA max UDMA/133 abar m2048@0xff771000 port 0xff771180 irq 29
[ 0.916124] libphy: Fixed MDIO Bus: probed
[ 0.916308] IOAPIC[0]: Set routing entry (5-18 -> 0xa2 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.916322] QUIRK: Enable AMD PLL fix
[ 0.916330] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.916448] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 0.916764] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 0.917041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.917125] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.917269] usb usb1: Product: xHCI Host Controller
[ 0.917351] usb usb1: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.917433] usb usb1: SerialNumber: 0000:00:10.0
[ 0.917604] hub 1-0:1.0: USB hub found
[ 0.917708] hub 1-0:1.0: 2 ports detected
[ 0.917870] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.917984] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.920187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.920272] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.920410] usb usb2: Product: xHCI Host Controller
[ 0.920490] usb usb2: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.920570] usb usb2: SerialNumber: 0000:00:10.0
[ 0.920728] hub 2-0:1.0: USB hub found
[ 0.922446] hub 2-0:1.0: 2 ports detected
[ 0.922641] IOAPIC[0]: Set routing entry (5-17 -> 0x43 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 0.922660] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.922779] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.923089] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 0.923353] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.923434] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.923567] usb usb3: Product: xHCI Host Controller
[ 0.923653] usb usb3: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.923733] usb usb3: SerialNumber: 0000:00:10.1
[ 0.923891] hub 3-0:1.0: USB hub found
[ 0.923974] hub 3-0:1.0: 2 ports detected
[ 0.924115] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.924226] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 0.926510] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.926593] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.926739] usb usb4: Product: xHCI Host Controller
[ 0.926821] usb usb4: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.926903] usb usb4: SerialNumber: 0000:00:10.1
[ 0.927056] hub 4-0:1.0: USB hub found
[ 0.927144] hub 4-0:1.0: 2 ports detected
[ 0.927320] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.927433] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
[ 0.986845] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 0.987106] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.987189] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.987327] usb usb5: Product: xHCI Host Controller
[ 0.987410] usb usb5: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.987492] usb usb5: SerialNumber: 0000:03:00.0
[ 0.987672] hub 5-0:1.0: USB hub found
[ 0.987762] hub 5-0:1.0: 2 ports detected
[ 0.987907] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.988019] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
[ 0.988189] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.988278] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.988415] usb usb6: Product: xHCI Host Controller
[ 0.988497] usb usb6: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.988589] usb usb6: SerialNumber: 0000:03:00.0
[ 0.988740] hub 6-0:1.0: USB hub found
[ 0.988828] hub 6-0:1.0: 2 ports detected
[ 0.988975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.989060] ehci-pci: EHCI PCI platform driver
[ 0.989201] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.989314] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 7
[ 0.989453] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.989607] ehci-pci 0000:00:12.2: debug port 1
[ 0.989718] ehci-pci 0000:00:12.2: irq 17, io mem 0xff76f000
[ 0.995695] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.995845] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.995928] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.996067] usb usb7: Product: EHCI Host Controller
[ 0.996150] usb usb7: Manufacturer: Linux 4.2.0-rc3+ ehci_hcd
[ 0.996231] usb usb7: SerialNumber: 0000:00:12.2
[ 0.996448] hub 7-0:1.0: USB hub found
[ 0.996535] hub 7-0:1.0: 5 ports detected
[ 0.996874] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.997008] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 8
[ 0.997148] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.997292] ehci-pci 0000:00:13.2: debug port 1
[ 0.997401] ehci-pci 0000:00:13.2: irq 17, io mem 0xff76d000
[ 1.002696] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.002840] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.002920] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.003054] usb usb8: Product: EHCI Host Controller
[ 1.003134] usb usb8: Manufacturer: Linux 4.2.0-rc3+ ehci_hcd
[ 1.003213] usb usb8: SerialNumber: 0000:00:13.2
[ 1.003435] hub 8-0:1.0: USB hub found
[ 1.003521] hub 8-0:1.0: 5 ports detected
[ 1.003768] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.003854] ohci-pci: OHCI PCI platform driver
[ 1.004048] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.004186] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 9
[ 1.004354] ohci-pci 0000:00:12.0: irq 18, io mem 0xff770000
[ 1.058693] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.058781] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.058920] usb usb9: Product: OHCI PCI host controller
[ 1.059002] usb usb9: Manufacturer: Linux 4.2.0-rc3+ ohci_hcd
[ 1.059085] usb usb9: SerialNumber: 0000:00:12.0
[ 1.059319] hub 9-0:1.0: USB hub found
[ 1.059408] hub 9-0:1.0: 5 ports detected
[ 1.059719] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.059864] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 10
[ 1.060021] ohci-pci 0000:00:13.0: irq 18, io mem 0xff76e000
[ 1.114648] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.114736] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.114875] usb usb10: Product: OHCI PCI host controller
[ 1.114958] usb usb10: Manufacturer: Linux 4.2.0-rc3+ ohci_hcd
[ 1.115041] usb usb10: SerialNumber: 0000:00:13.0
[ 1.115278] hub 10-0:1.0: USB hub found
[ 1.115367] hub 10-0:1.0: 5 ports detected
[ 1.115673] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.115817] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 11
[ 1.115974] ohci-pci 0000:00:14.5: irq 18, io mem 0xff76c000
[ 1.170597] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.170684] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.170822] usb usb11: Product: OHCI PCI host controller
[ 1.170904] usb usb11: Manufacturer: Linux 4.2.0-rc3+ ohci_hcd
[ 1.170987] usb usb11: SerialNumber: 0000:00:14.5
[ 1.171307] hub 11-0:1.0: USB hub found
[ 1.171408] hub 11-0:1.0: 2 ports detected
[ 1.171606] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.171772] usbcore: registered new interface driver usbserial
[ 1.171863] usbcore: registered new interface driver usbserial_generic
[ 1.171953] usbserial: USB Serial support registered for generic
[ 1.172068] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.172156] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.172789] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.172976] mousedev: PS/2 mouse device common for all mice
[ 1.173221] rtc_cmos 00:05: RTC can wake from S4
[ 1.173416] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.173520] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.173720] device-mapper: uevent: version 1.0.3
[ 1.173865] device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com
[ 1.174178] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.174365] usbcore: registered new interface driver usbhid
[ 1.174461] usbhid: USB HID core driver
[ 1.174567] drop_monitor: Initializing network drop monitor service
[ 1.174708] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.174831] Initializing XFRM netlink socket
[ 1.175006] NET: Registered protocol family 10
[ 1.175262] mip6: Mobile IPv6
[ 1.175347] NET: Registered protocol family 17
[ 1.175776] ... APIC ID: 10000000 (10)
[ 1.175864] ... APIC VERSION: 80050010
[ 1.175947] 0000000000000000000000000000000000000000000000000000000000000000
[ 1.176239] 0000000000000000000000000000000000000000000000000000000000000000
[ 1.176533] 0000000000000000000000000000000000000000000000000000000000008000
[ 1.176907] number of MP IRQ sources: 15.
[ 1.176908] number of IO-APIC #5 registers: 24.
[ 1.176909] number of IO-APIC #6 registers: 32.
[ 1.176910] testing the IO APIC.......................
[ 1.177002] IO APIC #5......
[ 1.177003] .... register #00: 05000000
[ 1.177004] ....... : physical APIC id: 05
[ 1.177005] ....... : Delivery Type: 0
[ 1.177005] ....... : LTS : 0
[ 1.177006] .... register #01: 00178021
[ 1.177006] ....... : max redirection entries: 17
[ 1.177007] ....... : PRQ implemented: 1
[ 1.177008] ....... : IO APIC version: 21
[ 1.177008] .... register #02: 05000000
[ 1.177009] ....... : arbitration: 05
[ 1.177010] .... register #03: 05018021
[ 1.177010] ....... : Boot DT : 1
[ 1.177011] .... IRQ redirection table:
[ 1.177012] IOAPIC 0:
[ 1.177016] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177019] pin01, enabled , edge , high, V(01), IRR(0), S(0), physical, D(00), M(0)
[ 1.177022] pin02, enabled , edge , high, V(02), IRR(0), S(0), physical, D(00), M(0)
[ 1.177025] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177028] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177031] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177034] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177037] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177040] pin08, enabled , edge , high, V(08), IRR(0), S(0), physical, D(00), M(0)
[ 1.177043] pin09, enabled , level, low , V(09), IRR(0), S(0), physical, D(00), M(0)
[ 1.177046] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177049] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177052] pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177055] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177058] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177061] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177065] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177068] pin11, enabled , level, low , V(11), IRR(0), S(0), physical, D(00), M(0)
[ 1.177071] pin12, enabled , level, low , V(12), IRR(0), S(0), physical, D(00), M(0)
[ 1.177074] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177077] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177080] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177083] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177086] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177088] IO APIC #6......
[ 1.177088] .... register #00: 06000000
[ 1.177089] ....... : physical APIC id: 06
[ 1.177090] ....... : Delivery Type: 0
[ 1.177090] ....... : LTS : 0
[ 1.177091] .... register #01: 001F8021
[ 1.177092] ....... : max redirection entries: 1F
[ 1.177092] ....... : PRQ implemented: 1
[ 1.177093] ....... : IO APIC version: 21
[ 1.177094] .... register #02: 00000000
[ 1.177094] ....... : arbitration: 00
[ 1.177095] .... IRQ redirection table:
[ 1.177095] IOAPIC 1:
[ 1.177097] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177099] pin01, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177101] pin02, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177103] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177105] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177107] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177109] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177111] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177113] pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177115] pin09, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177117] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177119] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177121] pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177123] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177125] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177127] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177129] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177130] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177132] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177134] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177136] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177138] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177140] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177142] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177144] pin18, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177146] pin19, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177148] pin1a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177150] pin1b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177152] pin1c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177154] pin1d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177156] pin1e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177158] pin1f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177158] IRQ to pin mappings:
[ 1.177160] IRQ0 -> 0:2
[ 1.177162] IRQ1 -> 0:1
[ 1.177163] IRQ3 -> 0:3
[ 1.177164] IRQ4 -> 0:4
[ 1.177165] IRQ5 -> 0:5
[ 1.177166] IRQ6 -> 0:6
[ 1.177167] IRQ7 -> 0:7
[ 1.177168] IRQ8 -> 0:8
[ 1.177169] IRQ9 -> 0:9
[ 1.177170] IRQ10 -> 0:10
[ 1.177171] IRQ11 -> 0:11
[ 1.177172] IRQ12 -> 0:12
[ 1.177173] IRQ13 -> 0:13
[ 1.177174] IRQ14 -> 0:14
[ 1.177175] IRQ15 -> 0:15
[ 1.177176] IRQ16 -> 0:16
[ 1.177177] IRQ17 -> 0:17
[ 1.177179] IRQ18 -> 0:18
[ 1.177180] IRQ19 -> 0:19
[ 1.177182] .................................... done.
[ 1.177276] AVX version of gcm_enc/dec engaged.
[ 1.177359] AES CTR mode by8 optimization enabled
[ 1.198817] Loading compiled-in X.509 certificates
[ 1.199625] Loaded X.509 cert 'Magrathea: Glacier signing key: 4a92f06a48b93d0e272e9a2b615aff0f01e0bbba'
[ 1.199777] registered taskstats version 1
[ 1.200258] Magic number: 7:442:343
[ 1.200366] tty tty60: hash matches
[ 1.200523] rtc_cmos 00:05: setting system clock to 2015-07-30 18:20:23 UTC (1438280423)
[ 1.200736] PM: Hibernation image not present or could not be loaded.
[ 1.204949] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.219487] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 1.368967] usb 1-1: New USB device found, idVendor=046d, idProduct=c030
[ 1.369055] usb 1-1: New USB device strings: Mfr=4, Product=32, SerialNumber=0
[ 1.369194] usb 1-1: Product: iFeel Mouse
[ 1.369288] usb 1-1: Manufacturer: Logitech Inc.
[ 1.369578] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.369721] usb 1-1: ep 0x1 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.375355] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.375468] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.386213] input: Logitech Inc. iFeel Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/0003:046D:C030.0001/input/input3
[ 1.388431] hid-generic 0003:046D:C030.0001: input,hidraw0: USB HID v1.00 Mouse [Logitech Inc. iFeel Mouse ] on usb-0000:00:10.0-1/input0
[ 1.424579] ata1.00: HPA detected: current 156299375, native 156301488
[ 1.424670] ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133
[ 1.424753] ata1.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.482842] ata1.00: configured for UDMA/133
[ 1.483252] scsi 0:0:0:0: Direct-Access ATA ST380815AS B PQ: 0 ANSI: 5
[ 1.483579] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.483644] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.483913] sd 0:0:0:0: [sda] Write Protect is off
[ 1.484001] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.484037] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.531191] sda: sda1
[ 1.531628] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.880860] tsc: Refined TSC clocksource calibration: 3693.283 MHz
[ 1.880956] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a7918f751d, max_idle_ns: 881590915016 ns
[ 2.880167] clocksource: Switched to clocksource tsc
[ 6.370643] ata2.00: qc timeout (cmd 0xec)
[ 6.370735] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 6.830227] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 16.820846] ata2.00: qc timeout (cmd 0xec)
[ 16.820939] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 16.821025] ata2: limiting SATA link speed to 3.0 Gbps
[ 17.280411] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 47.252262] ata2.00: qc timeout (cmd 0xec)
[ 47.252354] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 47.711835] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 47.712397] Freeing unused kernel memory: 1520K (ffffffff81d2f000 - ffffffff81eab000)
[ 47.712539] Write protecting the kernel read-only data: 12288k
[ 47.713043] Freeing unused kernel memory: 972K (ffff88000170d000 - ffff880001800000)
[ 47.713440] Freeing unused kernel memory: 876K (ffff880001b25000 - ffff880001c00000)
[ 47.716237] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 47.716461] systemd[1]: Running in initial RAM disk.
[ 47.716973] systemd[1]: Set hostname to <cm>.
[ 47.717428] random: systemd urandom read with 18 bits of entropy available
[ 47.721777] systemd[1]: Expecting device dev-mapper-fedora\x2dswap.device...
[ 47.722072] systemd[1]: Expecting device dev-mapper-fedora\x2droot.device...
[ 47.722342] systemd[1]: Starting Timers.
[ 47.722664] systemd[1]: Reached target Timers.
[ 47.722802] systemd[1]: Starting Journal Socket.
[ 47.723161] systemd[1]: Listening on Journal Socket.
[ 47.723368] systemd[1]: Starting dracut cmdline hook...
[ 47.724073] systemd[1]: Starting Journal Service...
[ 47.725132] systemd[1]: Started Journal Service.
[ 47.725875] systemd[1]: Started Load Kernel Modules.
[ 47.725990] systemd[1]: Starting udev Kernel Socket.
[ 47.726361] systemd[1]: Listening on udev Kernel Socket.
[ 47.726497] systemd[1]: Starting udev Control Socket.
[ 47.726838] systemd[1]: Listening on udev Control Socket.
[ 47.726938] systemd[1]: Starting Sockets.
[ 47.727252] systemd[1]: Reached target Sockets.
[ 47.727351] systemd[1]: Starting Swap.
[ 47.727665] systemd[1]: Reached target Swap.
[ 47.727767] systemd[1]: Starting Local File Systems.
[ 47.728083] systemd[1]: Reached target Local File Systems.
[ 47.818694] systemd-udevd[221]: starting version 204
[ 47.854689] scsi host2: pata_atiixp
[ 47.854856] scsi host3: pata_atiixp
[ 47.854975] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 47.855060] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 48.734092] random: nonblocking pool is initialized
[ 48.779483] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
[ 48.779572] EXT4-fs (dm-0): write access will be enabled during recovery
[ 49.366182] EXT4-fs (dm-0): recovery complete
[ 49.382494] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 49.555858] systemd-journald[134]: Received SIGTERM
[ 50.433316] SELinux: Disabled at runtime.
[ 50.433417] SELinux: Unregistering netfilter hooks
[ 50.474243] audit: type=1404 audit(1438280472.819:2): selinux=0 auid=4294967295 ses=4294967295
[ 51.244110] LVM: Logical Volume autoactivation enabled.
[ 51.244114] LVM: Activation generator successfully completed.
[ 54.048569] systemd-udevd[423]: starting version 204
[ 54.118710] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 54.810785] acpi-cpufreq: overriding BIOS provided _PSD data
[ 54.996303] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 54.998414] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 55.145860] microcode: CPU0: patch_level=0x06003104
[ 55.414589] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 55.498601] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 55.498838] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
[ 55.547224] microcode: CPU1: patch_level=0x06003104
[ 55.547364] microcode: CPU2: patch_level=0x06003104
[ 55.547474] microcode: CPU3: patch_level=0x06003104
[ 55.547671] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 56.279636] MCE: In-kernel MCE decoding enabled.
[ 56.455101] EDAC MC: Ver: 3.0.0
[ 56.659857] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 57.318718] AMD64 EDAC driver v3.4.0
[ 57.318842] EDAC amd64: DRAM ECC disabled.
[ 57.318930] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 57.359450] Adding 16703484k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:16703484k FS
[ 57.825604] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [bc:5f:f4:f8:24:b7]
[ 58.651684] alx 0000:04:00.0 em1: renamed from eth0
[ 58.660655] systemd-udevd[432]: renamed network interface eth0 to em1
[ 58.939827] kvm: Nested Virtualization enabled
[ 58.939915] kvm: Nested Paging enabled
[ 59.068071] IOAPIC[1]: Set routing entry (6-3 -> 0x24 -> IRQ 47 Mode:1 Active:1 Dest:15)
[ 59.068086] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 59.068218] irqdomain: allocate 1 MSI IRQ, VIRQ48
[ 59.068309] irqdomain: allocate parent returns 0
[ 59.068400] irqdomain: allocate IRTE index 0
[ 59.068489] irqdomain: IRTE0 vector 68 APICID15 dataffff8804288fb320 cfgffff88007b526240
[ 59.141808] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
[ 59.142071] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[ 59.142277] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 59.144285] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 59.222016] snd_hda_codec_realtek hdaudioC1D0: ALC1150: SKU not ready 0x00000000
[ 59.222671] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 59.222824] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 59.222986] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 59.223137] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 59.223229] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 59.223320] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 59.223413] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 59.223506] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 59.223598] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 59.240920] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 59.241162] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 59.241349] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 59.241540] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 59.242849] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 59.243137] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[ 59.243431] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[ 142.431481] systemd-journald[398]: Received request to flush runtime journal from PID 1
[ 171.700294] audit: type=1305 audit(1438280594.159:3): audit_pid=495 old=0 auid=4294967295 ses=4294967295 res=1
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [Bugfix]
@ 2015-07-30 18:34 ` Alex Deucher
0 siblings, 0 replies; 15+ messages in thread
From: Alex Deucher @ 2015-07-30 18:34 UTC (permalink / raw)
To: Jiang Liu
Cc: Thomas Gleixner, Alexander Holler, Mark Rustad, Joerg Roedel,
Tony Luck, Tejun Heo, LKML, x86, iommu
[-- Attachment #1: Type: text/plain, Size: 4511 bytes --]
On Thu, Jul 30, 2015 at 12:44 PM, Jiang Liu <jiang.liu@linux.intel.com> wrote:
> Hi Alexander, Mark, Alex,
> Could you please help to apply the debug patch and send me back
> the dmesg? Please also help to turn kernel paramemter "apic=debug".
See attached.
Thanks,
Alex
>
> Hi Mark,
> It seems that this regression is caused by support of multiple-MSI,
> but I have no PCI card supportting multiple-MSI at hand. So may I remotely
> access your system from Intel internal network? That will definitely speed
> up fix.
> Thanks!
> Gerry
>
> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
> ---
> drivers/iommu/amd_iommu.c | 15 +++++++++++++--
> drivers/iommu/intel_irq_remapping.c | 4 ++++
> 2 files changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> index a57e9b749895..c039ed9333a4 100644
> --- a/drivers/iommu/amd_iommu.c
> +++ b/drivers/iommu/amd_iommu.c
> @@ -3916,8 +3916,8 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
> union irte *irte = &data->irte_entry;
> struct IO_APIC_route_entry *entry;
>
> - data->irq_2_irte.devid = devid;
> - data->irq_2_irte.index = index + sub_handle;
> + irte_info->devid = devid;
> + irte_info->index = index + sub_handle;
>
> /* Setup IRTE for IOMMU */
> irte->val = 0;
> @@ -3926,6 +3926,10 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
> irte->fields.destination = irq_cfg->dest_apicid;
> irte->fields.dm = apic->irq_dest_mode;
> irte->fields.valid = 1;
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: IRTE%d vector %d APICID%d data%p cfg%p\n",
> + irte_info->index, irte->fields.vector,
> + irte->fields.destination, data, irq_cfg);
>
> switch (info->type) {
> case X86_IRQ_ALLOC_TYPE_IOAPIC:
> @@ -3972,6 +3976,9 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> info->type != X86_IRQ_ALLOC_TYPE_MSIX)
> return -EINVAL;
>
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate %d MSI IRQ, VIRQ%d\n", nr_irqs, virq);
> +
> /*
> * With IRQ remapping enabled, don't need contiguous CPU vectors
> * to support multiple MSI interrupts.
> @@ -3986,6 +3993,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
> if (ret < 0)
> return ret;
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate parent returns %d\n", ret);
>
> ret = -ENOMEM;
> data = kzalloc(sizeof(*data), GFP_KERNEL);
> @@ -4005,6 +4014,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
> kfree(data);
> goto out_free_parent;
> }
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate IRTE index %d\n", index);
>
> for (i = 0; i < nr_irqs; i++) {
> irq_data = irq_domain_get_irq_data(domain, virq + i);
> diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
> index f15692a410c7..bb093bc6b334 100644
> --- a/drivers/iommu/intel_irq_remapping.c
> +++ b/drivers/iommu/intel_irq_remapping.c
> @@ -1234,6 +1234,8 @@ static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
> MSI_ADDR_IR_SHV |
> MSI_ADDR_IR_INDEX1(index) |
> MSI_ADDR_IR_INDEX2(index);
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate index%d, subhandle%d, irte%llx,%llx\n", index, sub_handle, irte->high, irte->low);
> break;
>
> default:
> @@ -1305,6 +1307,8 @@ static int intel_irq_remapping_alloc(struct irq_domain *domain,
> kfree(data);
> goto out_free_parent;
> }
> + if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
> + pr_warn("irqdomain: allocate VIRQ%d, count%d, index%d\n", virq, nr_irqs, index);
>
> for (i = 0; i < nr_irqs; i++) {
> irq_data = irq_domain_get_irq_data(domain, virq + i);
> --
> 1.7.10.4
>
[-- Attachment #2: dmesg.apic-debug --]
[-- Type: application/octet-stream, Size: 74262 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0-rc3+ (alex@cm) (gcc version 4.8.3 20140624 (Red Hat 4.8.3-1) (GCC) ) #801 SMP Thu Jul 30 14:05:58 EDT 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-rc3+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root LANG=en_US.UTF-8 modprobe.blacklist=amdgpu,radeon apic=debug 3
[ 0.000000] tseg: 007f800000
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007bc3afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bc3b000-0x000000007bc6afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bc6b000-0x000000007bf29fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bf2a000-0x000000007bfe5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007bfe6000-0x000000007e10afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007e10b000-0x000000007e10bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007e10c000-0x000000007e311fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007e312000-0x000000007e467fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007e468000-0x000000007f02efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f02f000-0x000000007f071fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f072000-0x000000007f7f0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f7f1000-0x000000007f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A88X Extreme6+, BIOS P2.70 01/15/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 00007F800000 mask FFFFFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000043f000000 aka 17392M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x7f800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000fd8a0-0x000fd8af] mapped at [ffff8800000fd8a0]
[ 0.000000] mpc: fd560-fd824
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02019000, 0x02019fff] PGTABLE
[ 0.000000] BRK [0x0201a000, 0x0201afff] PGTABLE
[ 0.000000] BRK [0x0201b000, 0x0201bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43ee00000-0x43effffff]
[ 0.000000] [mem 0x43ee00000-0x43effffff] page 2M
[ 0.000000] BRK [0x0201c000, 0x0201cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x420000000-0x43edfffff]
[ 0.000000] [mem 0x420000000-0x43edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41fffffff]
[ 0.000000] [mem 0x400000000-0x41fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bc3afff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bbfffff] page 2M
[ 0.000000] [mem 0x7bc00000-0x7bc3afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7bc6b000-0x7bf29fff]
[ 0.000000] [mem 0x7bc6b000-0x7bf29fff] page 4k
[ 0.000000] BRK [0x0201d000, 0x0201dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7e10b000-0x7e10bfff]
[ 0.000000] [mem 0x7e10b000-0x7e10bfff] page 4k
[ 0.000000] BRK [0x0201e000, 0x0201efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7e312000-0x7e467fff]
[ 0.000000] [mem 0x7e312000-0x7e467fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7f02f000-0x7f071fff]
[ 0.000000] [mem 0x7f02f000-0x7f071fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7f7f1000-0x7f7fffff]
[ 0.000000] [mem 0x7f7f1000-0x7f7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x34dec000-0x366edfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000007BFAE080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007BFB40E8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150619/tbfadt-654)
[ 0.000000] ACPI: DSDT 0x000000007BFAE190 005F58 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000007BFDC080 000040
[ 0.000000] ACPI: APIC 0x000000007BFB41F8 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007BFB4278 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007BFB42C0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000007BFB4300 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: AAFT 0x000000007BFB4338 0002F5 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: IVRS 0x000000007BFB4630 000078 (v02 AMD BANTRY 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x000000007BFB46A8 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000007BFB5248 00033B (v02 AMD BANTRY 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000007BFB5588 0005A0 (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000007BFB5B28 001115 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43efe6000-0x43eff9fff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007bc3afff]
[ 0.000000] node 0: [mem 0x000000007bc6b000-0x000000007bf29fff]
[ 0.000000] node 0: [mem 0x000000007e10b000-0x000000007e10bfff]
[ 0.000000] node 0: [mem 0x000000007e312000-0x000000007e467fff]
[ 0.000000] node 0: [mem 0x000000007f02f000-0x000000007f071fff]
[ 0.000000] node 0: [mem 0x000000007f7f1000-0x000000007f7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
[ 0.000000] On node 0 totalpages: 3911744
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7875 pages used for memmap
[ 0.000000] DMA32 zone: 503971 pages, LIFO batch:31
[ 0.000000] Normal zone: 53184 pages used for memmap
[ 0.000000] Normal zone: 3403776 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 5, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 5, APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 5, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 5, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 5, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 5, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 5, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 5, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 5, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 5, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 5, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 5, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 5, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 5, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 5, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffffffff5f8000 (fec01000)
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bc3b000-0x7bc6afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bf2a000-0x7bfe5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bfe6000-0x7e10afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7e10c000-0x7e311fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7e468000-0x7f02efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f072000-0x7f7f0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0x7f800000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88043ec00000 s95512 r8192 d31464 u524288
[ 0.000000] pcpu-alloc: s95512 r8192 d31464 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3850600
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-rc3+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root LANG=en_US.UTF-8 modprobe.blacklist=amdgpu,radeon apic=debug 3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 15292176K/15646976K available (7209K kernel code, 1204K rwdata, 3220K rodata, 1520K init, 1428K bss, 354800K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1000 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 3693.296 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 7386.59 BogoMIPS (lpj=3693296)
[ 0.000188] pid_max: default: 32768 minimum: 301
[ 0.000274] ACPI: Core revision 20150619
[ 0.003550] ACPI: All ACPI Tables successfully acquired
[ 0.003697] Security Framework initialized
[ 0.003778] SELinux: Initializing.
[ 0.003863] SELinux: Starting in permissive mode
[ 0.004842] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.009398] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011476] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.011577] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.012003] Initializing cgroup subsys blkio
[ 0.012089] Initializing cgroup subsys devices
[ 0.012172] Initializing cgroup subsys freezer
[ 0.012255] Initializing cgroup subsys net_cls
[ 0.012338] Initializing cgroup subsys perf_event
[ 0.012450] CPU: Physical Processor ID: 0
[ 0.012531] CPU: Processor Core ID: 0
[ 0.012613] mce: CPU supports 7 MCE banks
[ 0.012699] LVT offset 1 assigned for vector 0xf9
[ 0.012785] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.012868] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.013050] Freeing SMP alternatives memory: 28K (ffffffff81eab000 - ffffffff81eb2000)
[ 0.021644] ftrace: allocating 27833 entries in 109 pages
[ 0.110488] enabled ExtINT on CPU#0
[ 0.110799] ENABLING IO-APIC IRQs
[ 0.110882] init IO_APIC IRQs
[ 0.110883] apic 5 pin 0 not connected
[ 0.110895] IOAPIC[0]: Set routing entry (5-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.110899] IOAPIC[0]: Set routing entry (5-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.110903] IOAPIC[0]: Set routing entry (5-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.110905] IOAPIC[0]: Set routing entry (5-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.110908] IOAPIC[0]: Set routing entry (5-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1)
[ 0.110911] IOAPIC[0]: Set routing entry (5-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.110913] IOAPIC[0]: Set routing entry (5-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.110916] IOAPIC[0]: Set routing entry (5-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.110919] IOAPIC[0]: Set routing entry (5-9 -> 0x39 -> IRQ 9 Mode:1 Active:1 Dest:1)
[ 0.110921] IOAPIC[0]: Set routing entry (5-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1)
[ 0.110924] IOAPIC[0]: Set routing entry (5-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1)
[ 0.110927] IOAPIC[0]: Set routing entry (5-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.110929] IOAPIC[0]: Set routing entry (5-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.110936] IOAPIC[0]: Set routing entry (5-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.110940] IOAPIC[0]: Set routing entry (5-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.110941] apic 5 pin 16 not connected
[ 0.110942] apic 5 pin 17 not connected
[ 0.110942] apic 5 pin 18 not connected
[ 0.110943] apic 5 pin 19 not connected
[ 0.110944] apic 5 pin 20 not connected
[ 0.110944] apic 5 pin 21 not connected
[ 0.110945] apic 5 pin 22 not connected
[ 0.110946] apic 5 pin 23 not connected
[ 0.110946] apic 6 pin 0 not connected
[ 0.110947] apic 6 pin 1 not connected
[ 0.110948] apic 6 pin 2 not connected
[ 0.110948] apic 6 pin 3 not connected
[ 0.110949] apic 6 pin 4 not connected
[ 0.110950] apic 6 pin 5 not connected
[ 0.110950] apic 6 pin 6 not connected
[ 0.110951] apic 6 pin 7 not connected
[ 0.110952] apic 6 pin 8 not connected
[ 0.110952] apic 6 pin 9 not connected
[ 0.110953] apic 6 pin 10 not connected
[ 0.110954] apic 6 pin 11 not connected
[ 0.110954] apic 6 pin 12 not connected
[ 0.110955] apic 6 pin 13 not connected
[ 0.110956] apic 6 pin 14 not connected
[ 0.110956] apic 6 pin 15 not connected
[ 0.110957] apic 6 pin 16 not connected
[ 0.110957] apic 6 pin 17 not connected
[ 0.110958] apic 6 pin 18 not connected
[ 0.110959] apic 6 pin 19 not connected
[ 0.110959] apic 6 pin 20 not connected
[ 0.110960] apic 6 pin 21 not connected
[ 0.110961] apic 6 pin 22 not connected
[ 0.110961] apic 6 pin 23 not connected
[ 0.110962] apic 6 pin 24 not connected
[ 0.110963] apic 6 pin 25 not connected
[ 0.110963] apic 6 pin 26 not connected
[ 0.110964] apic 6 pin 27 not connected
[ 0.110964] apic 6 pin 28 not connected
[ 0.110965] apic 6 pin 29 not connected
[ 0.110966] apic 6 pin 30 not connected
[ 0.110966] apic 6 pin 31 not connected
[ 0.111096] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.121173] Using local APIC timer interrupts.
calibrating APIC timer ...
[ 0.223164] ... lapic delta = 623857
[ 0.223245] ... PM-Timer delta = 357950
[ 0.223326] ... PM-Timer result ok
[ 0.223407] ..... delta 623857
[ 0.223488] ..... mult: 26794454
[ 0.223568] ..... calibration result: 99817
[ 0.223650] ..... CPU clock speed is 3693.0231 MHz.
[ 0.223732] ..... host bus clock speed is 99.0817 MHz.
[ 0.223819] smpboot: CPU0: AMD A10-7850K APU with Radeon(TM) R7 Graphics (fam: 15, model: 30, stepping: 01)
[ 0.224054] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.224218] ... version: 0
[ 0.224299] ... bit width: 48
[ 0.224381] ... generic registers: 6
[ 0.224462] ... value mask: 0000ffffffffffff
[ 0.224544] ... max period: 00007fffffffffff
[ 0.224626] ... fixed-purpose events: 0
[ 0.224708] ... event mask: 000000000000003f
[ 0.225326] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.225527] x86: Booting SMP configuration:
[ 0.225610] .... node #0, CPUs: #1
[ 0.226708] masked ExtINT on CPU#1
[ 0.228903] #2
[ 0.230108] masked ExtINT on CPU#2
[ 0.233357] #3
[ 0.233357] masked ExtINT on CPU#3
[ 0.235465] x86: Booted up 1 node, 4 CPUs
[ 0.235709] smpboot: Total of 4 processors activated (29546.36 BogoMIPS)
[ 0.236502] devtmpfs: initialized
[ 0.236815] PM: Registering ACPI NVS region [mem 0x7bf2a000-0x7bfe5fff] (770048 bytes)
[ 0.236957] PM: Registering ACPI NVS region [mem 0x7e10c000-0x7e311fff] (2121728 bytes)
[ 0.237172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.237381] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.237462] pinctrl core: initialized pinctrl subsystem
[ 0.237582] RTC time: 18:20:22, date: 07/30/15
[ 0.237760] NET: Registered protocol family 16
[ 0.241880] cpuidle: using governor ladder
[ 0.245875] cpuidle: using governor menu
[ 0.246081] ACPI: bus type PCI registered
[ 0.246164] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.246327] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.246466] PCI: not using MMCONFIG
[ 0.246547] PCI: Using configuration type 1 for base access
[ 0.246629] PCI: Using configuration type 1 for extended access
[ 0.251231] ACPI: Added _OSI(Module Device)
[ 0.251317] ACPI: Added _OSI(Processor Device)
[ 0.251399] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.251480] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.252856] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.255027] ACPI: Interpreter enabled
[ 0.255115] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.255303] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.255499] ACPI: (supports S0 S3 S4 S5)
[ 0.255578] ACPI: Using IOAPIC for interrupt routing
[ 0.255674] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.255839] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.255999] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.260206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.260296] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.260582] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.260947] PCI host bridge to bus 0000:00
[ 0.261039] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.261122] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.261212] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.261295] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.261378] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.261462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.261600] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.261738] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.261883] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[ 0.261971] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
[ 0.262057] pci 0000:00:01.0: [1002:130f] type 00 class 0x030000
[ 0.262072] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.262078] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 0.262082] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.262086] pci 0000:00:01.0: reg 0x24: [mem 0xff700000-0xff73ffff]
[ 0.262090] pci 0000:00:01.0: reg 0x30: [mem 0xff740000-0xff75ffff pref]
[ 0.262105] pci 0000:00:01.0: supports D1 D2
[ 0.262106] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.262168] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
[ 0.262188] pci 0000:00:01.1: reg 0x10: [mem 0xff764000-0xff767fff 64bit]
[ 0.262213] pci 0000:00:01.1: supports D1 D2
[ 0.262271] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[ 0.262339] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[ 0.262408] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[ 0.262496] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.262530] pci 0000:00:10.0: reg 0x10: [mem 0xff76a000-0xff76bfff 64bit]
[ 0.262594] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.262632] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.262756] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[ 0.262793] pci 0000:00:10.1: reg 0x10: [mem 0xff768000-0xff769fff 64bit]
[ 0.262857] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.262895] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.263023] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.263043] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
[ 0.263050] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
[ 0.263057] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
[ 0.263065] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
[ 0.263072] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
[ 0.263079] pci 0000:00:11.0: reg 0x24: [mem 0xff771000-0xff7717ff]
[ 0.263152] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.263164] pci 0000:00:12.0: reg 0x10: [mem 0xff770000-0xff770fff]
[ 0.263239] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.263356] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.263375] pci 0000:00:12.2: reg 0x10: [mem 0xff76f000-0xff76f0ff]
[ 0.263426] pci 0000:00:12.2: supports D1 D2
[ 0.263427] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.263458] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.263575] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.263587] pci 0000:00:13.0: reg 0x10: [mem 0xff76e000-0xff76efff]
[ 0.263656] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.263777] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.263798] pci 0000:00:13.2: reg 0x10: [mem 0xff76d000-0xff76d0ff]
[ 0.263849] pci 0000:00:13.2: supports D1 D2
[ 0.263850] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.263881] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.264008] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.264103] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
[ 0.264115] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
[ 0.264122] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
[ 0.264129] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
[ 0.264136] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
[ 0.264143] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
[ 0.264159] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.264249] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.264333] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.264416] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.264555] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.264576] pci 0000:00:14.2: reg 0x10: [mem 0xff760000-0xff763fff 64bit]
[ 0.264619] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.264649] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.264762] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.264878] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.264933] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.265051] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.265063] pci 0000:00:14.5: reg 0x10: [mem 0xff76c000-0xff76cfff]
[ 0.265131] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.265260] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.265309] pci 0000:00:15.0: supports D1 D2
[ 0.265310] pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
[ 0.265344] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.265461] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.265509] pci 0000:00:15.2: supports D1 D2
[ 0.265510] pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
[ 0.265542] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.265659] pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400
[ 0.265707] pci 0000:00:15.3: supports D1 D2
[ 0.265708] pci 0000:00:15.3: PME# supported from D0 D3hot D3cold
[ 0.265740] pci 0000:00:15.3: System wakeup disabled by ACPI
[ 0.265863] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[ 0.265922] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[ 0.265981] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[ 0.266034] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[ 0.266087] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[ 0.266139] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[ 0.266281] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.266370] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.266372] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.266373] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.266375] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.266376] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.266378] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.266379] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.266418] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.266560] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.266601] pci 0000:03:00.0: reg 0x10: [mem 0xff600000-0xff607fff 64bit]
[ 0.266693] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.267862] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 0.267956] pci 0000:00:15.2: bridge window [mem 0xff600000-0xff6fffff]
[ 0.268044] pci 0000:04:00.0: [1969:10a1] type 00 class 0x020000
[ 0.268090] pci 0000:04:00.0: reg 0x10: [mem 0xff500000-0xff53ffff 64bit]
[ 0.268102] pci 0000:04:00.0: reg 0x18: [io 0xe000-0xe07f]
[ 0.268183] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.269862] pci 0000:00:15.3: PCI bridge to [bus 04]
[ 0.269952] pci 0000:00:15.3: bridge window [io 0xe000-0xefff]
[ 0.269956] pci 0000:00:15.3: bridge window [mem 0xff500000-0xff5fffff]
[ 0.270402] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
[ 0.270769] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
[ 0.271136] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 *10 11 14 15)
[ 0.271501] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 7 10 11 14 15)
[ 0.271854] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.272239] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.272607] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.272984] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.273583] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.273664] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.273807] vgaarb: loaded
[ 0.273887] vgaarb: bridge control possible 0000:00:01.0
[ 0.274043] SCSI subsystem initialized
[ 0.274216] libata version 3.00 loaded.
[ 0.274257] ACPI: bus type USB registered
[ 0.274354] usbcore: registered new interface driver usbfs
[ 0.274442] usbcore: registered new interface driver hub
[ 0.274533] usbcore: registered new device driver usb
[ 0.274724] PCI: Using ACPI for IRQ routing
[ 0.281308] PCI: pci_cache_line_size set to 64 bytes
[ 0.281366] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.281367] e820: reserve RAM buffer [mem 0x7bc3b000-0x7bffffff]
[ 0.281368] e820: reserve RAM buffer [mem 0x7bf2a000-0x7bffffff]
[ 0.281369] e820: reserve RAM buffer [mem 0x7e10c000-0x7fffffff]
[ 0.281370] e820: reserve RAM buffer [mem 0x7e468000-0x7fffffff]
[ 0.281372] e820: reserve RAM buffer [mem 0x7f072000-0x7fffffff]
[ 0.281372] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
[ 0.281374] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[ 0.281486] NetLabel: Initializing
[ 0.281568] NetLabel: domain hash size = 128
[ 0.281649] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.281738] NetLabel: unlabeled traffic allowed by default
[ 0.281886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.282080] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.284231] clocksource: Switched to clocksource hpet
[ 0.291143] pnp: PnP ACPI init
[ 0.291353] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.291435] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.291494] system 00:01: [mem 0x80000000-0xbfffffff] has been reserved
[ 0.291576] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291632] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.291713] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291808] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.291889] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291986] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292010] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.292056] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.292137] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292170] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.292314] pnp 00:08: [dma 0 disabled]
[ 0.292350] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.292532] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.292615] system 00:09: [io 0x040b] has been reserved
[ 0.292698] system 00:09: [io 0x04d6] has been reserved
[ 0.292782] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.292864] system 00:09: [io 0x0c14] has been reserved
[ 0.294741] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.294824] system 00:09: [io 0x0c52] has been reserved
[ 0.294907] system 00:09: [io 0x0c6c] has been reserved
[ 0.294990] system 00:09: [io 0x0c6f] has been reserved
[ 0.295072] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.295155] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.295242] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.295326] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.295409] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.295493] system 00:09: [io 0x0800-0x089f] could not be reserved
[ 0.295576] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.295660] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.295742] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.295825] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.295908] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.295992] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.296075] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.296158] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.296246] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.296329] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.296413] system 00:09: [mem 0xff800000-0xffffffff] has been reserved
[ 0.296497] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296633] pnp: PnP ACPI: found 10 devices
[ 0.303201] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.303365] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.303454] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.303539] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 0.303621] pci 0000:00:15.2: bridge window [mem 0xff600000-0xff6fffff]
[ 0.303706] pci 0000:00:15.3: PCI bridge to [bus 04]
[ 0.303786] pci 0000:00:15.3: bridge window [io 0xe000-0xefff]
[ 0.303869] pci 0000:00:15.3: bridge window [mem 0xff500000-0xff5fffff]
[ 0.303954] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.303956] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.303957] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.303958] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.303960] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.303961] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.303963] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.303965] pci_bus 0000:01: resource 4 [io 0x0000-0x03af window]
[ 0.303966] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.303967] pci_bus 0000:01: resource 6 [io 0x03b0-0x03df window]
[ 0.303968] pci_bus 0000:01: resource 7 [io 0x0d00-0xffff window]
[ 0.303970] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.303971] pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.303972] pci_bus 0000:01: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.303974] pci_bus 0000:03: resource 1 [mem 0xff600000-0xff6fffff]
[ 0.303975] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.303976] pci_bus 0000:04: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.304004] NET: Registered protocol family 2
[ 0.304309] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.304729] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305040] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.305169] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.305343] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.305547] NET: Registered protocol family 1
[ 0.305644] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.305735] IOAPIC[0]: Set routing entry (5-18 -> 0x41 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.305854] IOAPIC[0]: Set routing entry (5-17 -> 0x51 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 0.305961] IOAPIC[0]: Set routing entry (5-18 -> 0x61 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.378419] IOAPIC[0]: Set routing entry (5-17 -> 0x71 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 0.389415] IOAPIC[0]: Set routing entry (5-18 -> 0x81 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.461346] IOAPIC[0]: Set routing entry (5-17 -> 0x91 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 0.472346] IOAPIC[0]: Set routing entry (5-18 -> 0xa1 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.544279] IOAPIC[0]: Set routing entry (5-16 -> 0xb1 -> IRQ 16 Mode:1 Active:1 Dest:15)
[ 0.544304] IOAPIC[0]: Set routing entry (5-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.544352] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.544439] PCI: CLS 64 bytes, default 64
[ 0.544503] Unpacking initramfs...
[ 0.868084] Freeing initrd memory: 25608K (ffff880034dec000 - ffff8800366ee000)
[ 0.868269] AMD-Vi: IOMMU performance counters supported
[ 0.868472] ERROR: Unable to locate IOAPIC for GSI 56
[ 0.868554] pci 0000:00:00.2: PCI INT A: failed to register GSI
[ 0.869454] iommu: Adding device 0000:00:00.0 to group 0
[ 0.869902] iommu: Adding device 0000:00:01.0 to group 1
[ 0.869994] iommu: Using direct mapping for device 0000:00:01.0
[ 0.870089] iommu: Adding device 0000:00:01.1 to group 1
[ 0.870468] iommu: Adding device 0000:00:02.0 to group 2
[ 0.870910] iommu: Adding device 0000:00:03.0 to group 3
[ 0.871330] iommu: Adding device 0000:00:04.0 to group 4
[ 0.871765] iommu: Adding device 0000:00:10.0 to group 5
[ 0.871861] iommu: Adding device 0000:00:10.1 to group 5
[ 0.872276] iommu: Adding device 0000:00:11.0 to group 6
[ 0.872707] iommu: Adding device 0000:00:12.0 to group 7
[ 0.872801] iommu: Adding device 0000:00:12.2 to group 7
[ 0.873225] iommu: Adding device 0000:00:13.0 to group 8
[ 0.873318] iommu: Adding device 0000:00:13.2 to group 8
[ 0.873761] iommu: Adding device 0000:00:14.0 to group 9
[ 0.873856] iommu: Adding device 0000:00:14.1 to group 9
[ 0.873948] iommu: Adding device 0000:00:14.2 to group 9
[ 0.874040] iommu: Adding device 0000:00:14.3 to group 9
[ 0.874468] iommu: Adding device 0000:00:14.4 to group 10
[ 0.874888] iommu: Adding device 0000:00:14.5 to group 11
[ 0.875319] iommu: Adding device 0000:00:15.0 to group 12
[ 0.875417] iommu: Adding device 0000:00:15.2 to group 12
[ 0.875518] iommu: Adding device 0000:00:15.3 to group 12
[ 0.875964] iommu: Adding device 0000:00:18.0 to group 13
[ 0.876062] iommu: Adding device 0000:00:18.1 to group 13
[ 0.876159] iommu: Adding device 0000:00:18.2 to group 13
[ 0.876255] iommu: Adding device 0000:00:18.3 to group 13
[ 0.876350] iommu: Adding device 0000:00:18.4 to group 13
[ 0.876446] iommu: Adding device 0000:00:18.5 to group 13
[ 0.876541] iommu: Adding device 0000:03:00.0 to group 12
[ 0.876636] iommu: Adding device 0000:04:00.0 to group 12
[ 0.876735] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.876827] AMD-Vi: Extended features: PPR GT IA PC
[ 0.877041] AMD-Vi: Interrupt remapping enabled
[ 0.877324] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.879466] perf: AMD NB counters detected
[ 0.879570] perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
[ 0.879679] LVT offset 0 assigned for vector 0x400
[ 0.879772] perf: AMD IBS detected (0x000001ff)
[ 0.880408] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.880510] Initialise system trusted keyring
[ 0.880608] audit: initializing netlink subsys (disabled)
[ 0.880719] audit: type=2000 audit(1438280421.689:1): initialized
[ 0.881099] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.882750] VFS: Disk quotas dquot_6.6.0
[ 0.882859] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.883316] SELinux: Registering netfilter hooks
[ 0.886616] NET: Registered protocol family 38
[ 0.886720] Key type asymmetric registered
[ 0.886802] Asymmetric key parser 'x509' registered
[ 0.886910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.887096] io scheduler noop registered
[ 0.887182] io scheduler deadline registered
[ 0.887308] io scheduler cfq registered (default)
[ 0.887583] irqdomain: allocate 1 MSI IRQ, VIRQ25
[ 0.887683] irqdomain: allocate parent returns 0
[ 0.887772] irqdomain: allocate IRTE index 0
[ 0.887852] irqdomain: IRTE0 vector 225 APICID15 dataffff88042855a460 cfgffff8804285b0240
[ 0.888044] irqdomain: allocate 1 MSI IRQ, VIRQ26
[ 0.888124] irqdomain: allocate parent returns 0
[ 0.888205] irqdomain: allocate IRTE index 0
[ 0.888285] irqdomain: IRTE0 vector 34 APICID15 dataffff88042855a520 cfgffff8804285b0280
[ 0.888509] irqdomain: allocate 1 MSI IRQ, VIRQ27
[ 0.888589] irqdomain: allocate parent returns 0
[ 0.888690] irqdomain: allocate IRTE index 0
[ 0.888775] irqdomain: IRTE0 vector 66 APICID15 dataffff88042855a5e0 cfgffff8804285b02c0
[ 0.888983] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 0.889065] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 0.889082] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[ 0.889163] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.889245] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[ 0.889262] pcieport 0000:00:15.3: Signaling PME through PCIe PME interrupt
[ 0.889349] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.889430] pcie_pme 0000:00:15.3:pcie01: service driver pcie_pme loaded
[ 0.889435] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.889519] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.889704] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.889843] ACPI: Power Button [PWRB]
[ 0.889954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.890088] ACPI: Power Button [PWRF]
[ 0.890199] ACPI: acpi_idle registered with cpuidle
[ 0.890658] GHES: HEST is not enabled!
[ 0.890863] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.911466] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.912139] Non-volatile memory driver v1.3
[ 0.912248] Linux agpgart interface v0.103
[ 0.913652] loop: module loaded
[ 0.913839] ahci 0000:00:11.0: version 3.0
[ 0.913914] IOAPIC[0]: Set routing entry (5-19 -> 0x52 -> IRQ 19 Mode:1 Active:1 Dest:15)
[ 0.913954] irqdomain: allocate 4 MSI IRQ, VIRQ28
[ 0.914038] irqdomain: allocate parent returns 0
[ 0.914123] irqdomain: allocate IRTE index 0
[ 0.914205] irqdomain: IRTE0 vector 98 APICID15 dataffff8804285ee780 cfgffff880076e2d2c0
[ 0.914348] irqdomain: IRTE1 vector 114 APICID15 dataffff8804285ee7e0 cfgffff880076e2d300
[ 0.914485] irqdomain: IRTE2 vector 130 APICID15 dataffff8804285ee800 cfgffff880076e2d340
[ 0.914622] irqdomain: IRTE3 vector 146 APICID15 dataffff8804285ee820 cfgffff880076e2d380
[ 0.914822] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.914960] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
[ 0.915472] scsi host0: ahci
[ 0.915655] scsi host1: ahci
[ 0.915772] ata1: SATA max UDMA/133 abar m2048@0xff771000 port 0xff771100 irq 28
[ 0.915912] ata2: SATA max UDMA/133 abar m2048@0xff771000 port 0xff771180 irq 29
[ 0.916124] libphy: Fixed MDIO Bus: probed
[ 0.916308] IOAPIC[0]: Set routing entry (5-18 -> 0xa2 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 0.916322] QUIRK: Enable AMD PLL fix
[ 0.916330] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.916448] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 0.916764] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 0.917041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.917125] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.917269] usb usb1: Product: xHCI Host Controller
[ 0.917351] usb usb1: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.917433] usb usb1: SerialNumber: 0000:00:10.0
[ 0.917604] hub 1-0:1.0: USB hub found
[ 0.917708] hub 1-0:1.0: 2 ports detected
[ 0.917870] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.917984] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.920187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.920272] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.920410] usb usb2: Product: xHCI Host Controller
[ 0.920490] usb usb2: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.920570] usb usb2: SerialNumber: 0000:00:10.0
[ 0.920728] hub 2-0:1.0: USB hub found
[ 0.922446] hub 2-0:1.0: 2 ports detected
[ 0.922641] IOAPIC[0]: Set routing entry (5-17 -> 0x43 -> IRQ 17 Mode:1 Active:1 Dest:15)
[ 0.922660] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.922779] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.923089] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 0.923353] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.923434] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.923567] usb usb3: Product: xHCI Host Controller
[ 0.923653] usb usb3: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.923733] usb usb3: SerialNumber: 0000:00:10.1
[ 0.923891] hub 3-0:1.0: USB hub found
[ 0.923974] hub 3-0:1.0: 2 ports detected
[ 0.924115] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.924226] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 0.926510] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.926593] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.926739] usb usb4: Product: xHCI Host Controller
[ 0.926821] usb usb4: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.926903] usb usb4: SerialNumber: 0000:00:10.1
[ 0.927056] hub 4-0:1.0: USB hub found
[ 0.927144] hub 4-0:1.0: 2 ports detected
[ 0.927320] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.927433] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
[ 0.986845] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 0.987106] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.987189] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.987327] usb usb5: Product: xHCI Host Controller
[ 0.987410] usb usb5: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.987492] usb usb5: SerialNumber: 0000:03:00.0
[ 0.987672] hub 5-0:1.0: USB hub found
[ 0.987762] hub 5-0:1.0: 2 ports detected
[ 0.987907] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.988019] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
[ 0.988189] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.988278] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.988415] usb usb6: Product: xHCI Host Controller
[ 0.988497] usb usb6: Manufacturer: Linux 4.2.0-rc3+ xhci-hcd
[ 0.988589] usb usb6: SerialNumber: 0000:03:00.0
[ 0.988740] hub 6-0:1.0: USB hub found
[ 0.988828] hub 6-0:1.0: 2 ports detected
[ 0.988975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.989060] ehci-pci: EHCI PCI platform driver
[ 0.989201] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.989314] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 7
[ 0.989453] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.989607] ehci-pci 0000:00:12.2: debug port 1
[ 0.989718] ehci-pci 0000:00:12.2: irq 17, io mem 0xff76f000
[ 0.995695] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.995845] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.995928] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.996067] usb usb7: Product: EHCI Host Controller
[ 0.996150] usb usb7: Manufacturer: Linux 4.2.0-rc3+ ehci_hcd
[ 0.996231] usb usb7: SerialNumber: 0000:00:12.2
[ 0.996448] hub 7-0:1.0: USB hub found
[ 0.996535] hub 7-0:1.0: 5 ports detected
[ 0.996874] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.997008] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 8
[ 0.997148] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.997292] ehci-pci 0000:00:13.2: debug port 1
[ 0.997401] ehci-pci 0000:00:13.2: irq 17, io mem 0xff76d000
[ 1.002696] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.002840] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.002920] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.003054] usb usb8: Product: EHCI Host Controller
[ 1.003134] usb usb8: Manufacturer: Linux 4.2.0-rc3+ ehci_hcd
[ 1.003213] usb usb8: SerialNumber: 0000:00:13.2
[ 1.003435] hub 8-0:1.0: USB hub found
[ 1.003521] hub 8-0:1.0: 5 ports detected
[ 1.003768] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.003854] ohci-pci: OHCI PCI platform driver
[ 1.004048] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.004186] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 9
[ 1.004354] ohci-pci 0000:00:12.0: irq 18, io mem 0xff770000
[ 1.058693] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.058781] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.058920] usb usb9: Product: OHCI PCI host controller
[ 1.059002] usb usb9: Manufacturer: Linux 4.2.0-rc3+ ohci_hcd
[ 1.059085] usb usb9: SerialNumber: 0000:00:12.0
[ 1.059319] hub 9-0:1.0: USB hub found
[ 1.059408] hub 9-0:1.0: 5 ports detected
[ 1.059719] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.059864] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 10
[ 1.060021] ohci-pci 0000:00:13.0: irq 18, io mem 0xff76e000
[ 1.114648] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.114736] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.114875] usb usb10: Product: OHCI PCI host controller
[ 1.114958] usb usb10: Manufacturer: Linux 4.2.0-rc3+ ohci_hcd
[ 1.115041] usb usb10: SerialNumber: 0000:00:13.0
[ 1.115278] hub 10-0:1.0: USB hub found
[ 1.115367] hub 10-0:1.0: 5 ports detected
[ 1.115673] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.115817] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 11
[ 1.115974] ohci-pci 0000:00:14.5: irq 18, io mem 0xff76c000
[ 1.170597] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.170684] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.170822] usb usb11: Product: OHCI PCI host controller
[ 1.170904] usb usb11: Manufacturer: Linux 4.2.0-rc3+ ohci_hcd
[ 1.170987] usb usb11: SerialNumber: 0000:00:14.5
[ 1.171307] hub 11-0:1.0: USB hub found
[ 1.171408] hub 11-0:1.0: 2 ports detected
[ 1.171606] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.171772] usbcore: registered new interface driver usbserial
[ 1.171863] usbcore: registered new interface driver usbserial_generic
[ 1.171953] usbserial: USB Serial support registered for generic
[ 1.172068] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.172156] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.172789] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.172976] mousedev: PS/2 mouse device common for all mice
[ 1.173221] rtc_cmos 00:05: RTC can wake from S4
[ 1.173416] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.173520] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.173720] device-mapper: uevent: version 1.0.3
[ 1.173865] device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com
[ 1.174178] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.174365] usbcore: registered new interface driver usbhid
[ 1.174461] usbhid: USB HID core driver
[ 1.174567] drop_monitor: Initializing network drop monitor service
[ 1.174708] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.174831] Initializing XFRM netlink socket
[ 1.175006] NET: Registered protocol family 10
[ 1.175262] mip6: Mobile IPv6
[ 1.175347] NET: Registered protocol family 17
[ 1.175776] ... APIC ID: 10000000 (10)
[ 1.175864] ... APIC VERSION: 80050010
[ 1.175947] 0000000000000000000000000000000000000000000000000000000000000000
[ 1.176239] 0000000000000000000000000000000000000000000000000000000000000000
[ 1.176533] 0000000000000000000000000000000000000000000000000000000000008000
[ 1.176907] number of MP IRQ sources: 15.
[ 1.176908] number of IO-APIC #5 registers: 24.
[ 1.176909] number of IO-APIC #6 registers: 32.
[ 1.176910] testing the IO APIC.......................
[ 1.177002] IO APIC #5......
[ 1.177003] .... register #00: 05000000
[ 1.177004] ....... : physical APIC id: 05
[ 1.177005] ....... : Delivery Type: 0
[ 1.177005] ....... : LTS : 0
[ 1.177006] .... register #01: 00178021
[ 1.177006] ....... : max redirection entries: 17
[ 1.177007] ....... : PRQ implemented: 1
[ 1.177008] ....... : IO APIC version: 21
[ 1.177008] .... register #02: 05000000
[ 1.177009] ....... : arbitration: 05
[ 1.177010] .... register #03: 05018021
[ 1.177010] ....... : Boot DT : 1
[ 1.177011] .... IRQ redirection table:
[ 1.177012] IOAPIC 0:
[ 1.177016] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177019] pin01, enabled , edge , high, V(01), IRR(0), S(0), physical, D(00), M(0)
[ 1.177022] pin02, enabled , edge , high, V(02), IRR(0), S(0), physical, D(00), M(0)
[ 1.177025] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177028] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177031] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177034] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177037] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177040] pin08, enabled , edge , high, V(08), IRR(0), S(0), physical, D(00), M(0)
[ 1.177043] pin09, enabled , level, low , V(09), IRR(0), S(0), physical, D(00), M(0)
[ 1.177046] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177049] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177052] pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177055] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177058] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177061] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177065] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177068] pin11, enabled , level, low , V(11), IRR(0), S(0), physical, D(00), M(0)
[ 1.177071] pin12, enabled , level, low , V(12), IRR(0), S(0), physical, D(00), M(0)
[ 1.177074] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177077] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177080] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177083] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177086] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177088] IO APIC #6......
[ 1.177088] .... register #00: 06000000
[ 1.177089] ....... : physical APIC id: 06
[ 1.177090] ....... : Delivery Type: 0
[ 1.177090] ....... : LTS : 0
[ 1.177091] .... register #01: 001F8021
[ 1.177092] ....... : max redirection entries: 1F
[ 1.177092] ....... : PRQ implemented: 1
[ 1.177093] ....... : IO APIC version: 21
[ 1.177094] .... register #02: 00000000
[ 1.177094] ....... : arbitration: 00
[ 1.177095] .... IRQ redirection table:
[ 1.177095] IOAPIC 1:
[ 1.177097] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177099] pin01, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177101] pin02, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177103] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177105] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177107] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177109] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177111] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177113] pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177115] pin09, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177117] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177119] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177121] pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177123] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177125] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177127] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177129] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177130] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177132] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177134] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177136] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177138] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177140] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177142] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177144] pin18, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177146] pin19, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177148] pin1a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177150] pin1b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177152] pin1c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177154] pin1d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177156] pin1e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177158] pin1f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 1.177158] IRQ to pin mappings:
[ 1.177160] IRQ0 -> 0:2
[ 1.177162] IRQ1 -> 0:1
[ 1.177163] IRQ3 -> 0:3
[ 1.177164] IRQ4 -> 0:4
[ 1.177165] IRQ5 -> 0:5
[ 1.177166] IRQ6 -> 0:6
[ 1.177167] IRQ7 -> 0:7
[ 1.177168] IRQ8 -> 0:8
[ 1.177169] IRQ9 -> 0:9
[ 1.177170] IRQ10 -> 0:10
[ 1.177171] IRQ11 -> 0:11
[ 1.177172] IRQ12 -> 0:12
[ 1.177173] IRQ13 -> 0:13
[ 1.177174] IRQ14 -> 0:14
[ 1.177175] IRQ15 -> 0:15
[ 1.177176] IRQ16 -> 0:16
[ 1.177177] IRQ17 -> 0:17
[ 1.177179] IRQ18 -> 0:18
[ 1.177180] IRQ19 -> 0:19
[ 1.177182] .................................... done.
[ 1.177276] AVX version of gcm_enc/dec engaged.
[ 1.177359] AES CTR mode by8 optimization enabled
[ 1.198817] Loading compiled-in X.509 certificates
[ 1.199625] Loaded X.509 cert 'Magrathea: Glacier signing key: 4a92f06a48b93d0e272e9a2b615aff0f01e0bbba'
[ 1.199777] registered taskstats version 1
[ 1.200258] Magic number: 7:442:343
[ 1.200366] tty tty60: hash matches
[ 1.200523] rtc_cmos 00:05: setting system clock to 2015-07-30 18:20:23 UTC (1438280423)
[ 1.200736] PM: Hibernation image not present or could not be loaded.
[ 1.204949] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.219487] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 1.368967] usb 1-1: New USB device found, idVendor=046d, idProduct=c030
[ 1.369055] usb 1-1: New USB device strings: Mfr=4, Product=32, SerialNumber=0
[ 1.369194] usb 1-1: Product: iFeel Mouse
[ 1.369288] usb 1-1: Manufacturer: Logitech Inc.
[ 1.369578] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.369721] usb 1-1: ep 0x1 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.375355] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.375468] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.386213] input: Logitech Inc. iFeel Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/0003:046D:C030.0001/input/input3
[ 1.388431] hid-generic 0003:046D:C030.0001: input,hidraw0: USB HID v1.00 Mouse [Logitech Inc. iFeel Mouse ] on usb-0000:00:10.0-1/input0
[ 1.424579] ata1.00: HPA detected: current 156299375, native 156301488
[ 1.424670] ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133
[ 1.424753] ata1.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.482842] ata1.00: configured for UDMA/133
[ 1.483252] scsi 0:0:0:0: Direct-Access ATA ST380815AS B PQ: 0 ANSI: 5
[ 1.483579] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.483644] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.483913] sd 0:0:0:0: [sda] Write Protect is off
[ 1.484001] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.484037] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.531191] sda: sda1
[ 1.531628] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.880860] tsc: Refined TSC clocksource calibration: 3693.283 MHz
[ 1.880956] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a7918f751d, max_idle_ns: 881590915016 ns
[ 2.880167] clocksource: Switched to clocksource tsc
[ 6.370643] ata2.00: qc timeout (cmd 0xec)
[ 6.370735] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 6.830227] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 16.820846] ata2.00: qc timeout (cmd 0xec)
[ 16.820939] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 16.821025] ata2: limiting SATA link speed to 3.0 Gbps
[ 17.280411] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 47.252262] ata2.00: qc timeout (cmd 0xec)
[ 47.252354] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 47.711835] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 47.712397] Freeing unused kernel memory: 1520K (ffffffff81d2f000 - ffffffff81eab000)
[ 47.712539] Write protecting the kernel read-only data: 12288k
[ 47.713043] Freeing unused kernel memory: 972K (ffff88000170d000 - ffff880001800000)
[ 47.713440] Freeing unused kernel memory: 876K (ffff880001b25000 - ffff880001c00000)
[ 47.716237] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 47.716461] systemd[1]: Running in initial RAM disk.
[ 47.716973] systemd[1]: Set hostname to <cm>.
[ 47.717428] random: systemd urandom read with 18 bits of entropy available
[ 47.721777] systemd[1]: Expecting device dev-mapper-fedora\x2dswap.device...
[ 47.722072] systemd[1]: Expecting device dev-mapper-fedora\x2droot.device...
[ 47.722342] systemd[1]: Starting Timers.
[ 47.722664] systemd[1]: Reached target Timers.
[ 47.722802] systemd[1]: Starting Journal Socket.
[ 47.723161] systemd[1]: Listening on Journal Socket.
[ 47.723368] systemd[1]: Starting dracut cmdline hook...
[ 47.724073] systemd[1]: Starting Journal Service...
[ 47.725132] systemd[1]: Started Journal Service.
[ 47.725875] systemd[1]: Started Load Kernel Modules.
[ 47.725990] systemd[1]: Starting udev Kernel Socket.
[ 47.726361] systemd[1]: Listening on udev Kernel Socket.
[ 47.726497] systemd[1]: Starting udev Control Socket.
[ 47.726838] systemd[1]: Listening on udev Control Socket.
[ 47.726938] systemd[1]: Starting Sockets.
[ 47.727252] systemd[1]: Reached target Sockets.
[ 47.727351] systemd[1]: Starting Swap.
[ 47.727665] systemd[1]: Reached target Swap.
[ 47.727767] systemd[1]: Starting Local File Systems.
[ 47.728083] systemd[1]: Reached target Local File Systems.
[ 47.818694] systemd-udevd[221]: starting version 204
[ 47.854689] scsi host2: pata_atiixp
[ 47.854856] scsi host3: pata_atiixp
[ 47.854975] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 47.855060] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 48.734092] random: nonblocking pool is initialized
[ 48.779483] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
[ 48.779572] EXT4-fs (dm-0): write access will be enabled during recovery
[ 49.366182] EXT4-fs (dm-0): recovery complete
[ 49.382494] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 49.555858] systemd-journald[134]: Received SIGTERM
[ 50.433316] SELinux: Disabled at runtime.
[ 50.433417] SELinux: Unregistering netfilter hooks
[ 50.474243] audit: type=1404 audit(1438280472.819:2): selinux=0 auid=4294967295 ses=4294967295
[ 51.244110] LVM: Logical Volume autoactivation enabled.
[ 51.244114] LVM: Activation generator successfully completed.
[ 54.048569] systemd-udevd[423]: starting version 204
[ 54.118710] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 54.810785] acpi-cpufreq: overriding BIOS provided _PSD data
[ 54.996303] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 54.998414] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 55.145860] microcode: CPU0: patch_level=0x06003104
[ 55.414589] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 55.498601] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 55.498838] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
[ 55.547224] microcode: CPU1: patch_level=0x06003104
[ 55.547364] microcode: CPU2: patch_level=0x06003104
[ 55.547474] microcode: CPU3: patch_level=0x06003104
[ 55.547671] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 56.279636] MCE: In-kernel MCE decoding enabled.
[ 56.455101] EDAC MC: Ver: 3.0.0
[ 56.659857] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 57.318718] AMD64 EDAC driver v3.4.0
[ 57.318842] EDAC amd64: DRAM ECC disabled.
[ 57.318930] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 57.359450] Adding 16703484k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:16703484k FS
[ 57.825604] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [bc:5f:f4:f8:24:b7]
[ 58.651684] alx 0000:04:00.0 em1: renamed from eth0
[ 58.660655] systemd-udevd[432]: renamed network interface eth0 to em1
[ 58.939827] kvm: Nested Virtualization enabled
[ 58.939915] kvm: Nested Paging enabled
[ 59.068071] IOAPIC[1]: Set routing entry (6-3 -> 0x24 -> IRQ 47 Mode:1 Active:1 Dest:15)
[ 59.068086] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 59.068218] irqdomain: allocate 1 MSI IRQ, VIRQ48
[ 59.068309] irqdomain: allocate parent returns 0
[ 59.068400] irqdomain: allocate IRTE index 0
[ 59.068489] irqdomain: IRTE0 vector 68 APICID15 dataffff8804288fb320 cfgffff88007b526240
[ 59.141808] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
[ 59.142071] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[ 59.142277] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 59.144285] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 59.222016] snd_hda_codec_realtek hdaudioC1D0: ALC1150: SKU not ready 0x00000000
[ 59.222671] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 59.222824] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 59.222986] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 59.223137] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 59.223229] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 59.223320] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 59.223413] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 59.223506] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 59.223598] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 59.240920] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 59.241162] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 59.241349] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 59.241540] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 59.242849] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 59.243137] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[ 59.243431] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[ 142.431481] systemd-journald[398]: Received request to flush runtime journal from PID 1
[ 171.700294] audit: type=1305 audit(1438280594.159:3): audit_pid=495 old=0 auid=4294967295 ses=4294967295 res=1
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2015-07-30 18:34 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-07-30 16:44 [Bugfix] Jiang Liu
2015-07-30 16:44 ` [Bugfix] Jiang Liu
[not found] ` <1438274680-27916-1-git-send-email-jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-07-30 16:46 ` [Bugfix] Jiang Liu
2015-07-30 16:46 ` [Bugfix] Jiang Liu
2015-07-30 18:34 ` [Bugfix] Alex Deucher
2015-07-30 18:34 ` [Bugfix] Alex Deucher
-- strict thread matches above, loose matches on Subject: below --
2009-04-02 12:52 [BUGFIX] phcoder
2009-04-02 14:45 ` [BUGFIX] Bean
2009-04-02 14:48 ` [BUGFIX] phcoder
2009-04-02 15:55 ` [BUGFIX] Manoel Rebelo Abranches
2009-04-02 18:19 ` [BUGFIX] phcoder
2009-04-03 5:06 ` [BUGFIX] Bean
2009-04-03 14:48 ` [BUGFIX] phcoder
2009-04-03 16:55 ` [BUGFIX] Pavel Roskin
2009-04-04 12:30 ` [BUGFIX] phcoder
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.