From: michal.simek@xilinx.com (Michal Simek)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFCv3 2/4] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
Date: Tue, 4 Aug 2015 10:13:50 +0200 [thread overview]
Message-ID: <55C0743E.1090406@xilinx.com> (raw)
In-Reply-To: <1438305237-18497-3-git-send-email-moritz.fischer@ettus.com>
On 07/31/2015 03:13 AM, Moritz Fischer wrote:
> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
> ---
> arch/arm/boot/dts/zynq-7000.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index 0691508..6bebf02 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -1,5 +1,6 @@
> /*
> * Copyright (C) 2011 - 2014 Xilinx
> + * Copyright (C) 2015 National Instruments Corp.
> *
> * This software is licensed under the terms of the GNU General Public
> * License version 2, as published by the Free Software Foundation, and
> @@ -258,6 +259,13 @@
> reg = <0x100 0x100>;
> };
>
> + rstc: rstc at 200 {
> + compatible = "xlnx,zynq-reset";
> + reg = <0x200 0x48>;
> + #reset-cells = <1>;
> + syscon = <&slcr>;
> + };
> +
> pinctrl0: pinctrl at 700 {
> compatible = "xlnx,pinctrl-zynq";
> reg = <0x700 0x200>;
>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Thanks,
Michal
WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
To: Moritz Fischer
<moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org>,
p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org
Subject: Re: [RFCv3 2/4] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
Date: Tue, 4 Aug 2015 10:13:50 +0200 [thread overview]
Message-ID: <55C0743E.1090406@xilinx.com> (raw)
In-Reply-To: <1438305237-18497-3-git-send-email-moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org>
On 07/31/2015 03:13 AM, Moritz Fischer wrote:
> Signed-off-by: Moritz Fischer <moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org>
> ---
> arch/arm/boot/dts/zynq-7000.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index 0691508..6bebf02 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -1,5 +1,6 @@
> /*
> * Copyright (C) 2011 - 2014 Xilinx
> + * Copyright (C) 2015 National Instruments Corp.
> *
> * This software is licensed under the terms of the GNU General Public
> * License version 2, as published by the Free Software Foundation, and
> @@ -258,6 +259,13 @@
> reg = <0x100 0x100>;
> };
>
> + rstc: rstc@200 {
> + compatible = "xlnx,zynq-reset";
> + reg = <0x200 0x48>;
> + #reset-cells = <1>;
> + syscon = <&slcr>;
> + };
> +
> pinctrl0: pinctrl@700 {
> compatible = "xlnx,pinctrl-zynq";
> reg = <0x700 0x200>;
>
Acked-by: Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
Thanks,
Michal
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek@xilinx.com>
To: Moritz Fischer <moritz.fischer@ettus.com>, <p.zabel@pengutronix.de>
Cc: <mark.rutland@arm.com>, <devicetree@vger.kernel.org>,
<linux@arm.linux.org.uk>, <pawel.moll@arm.com>,
<ijc+devicetree@hellion.org.uk>, <michal.simek@xilinx.com>,
<linux-kernel@vger.kernel.org>, <robh+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <galak@codeaurora.org>,
<soren.brinkmann@xilinx.com>
Subject: Re: [RFCv3 2/4] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
Date: Tue, 4 Aug 2015 10:13:50 +0200 [thread overview]
Message-ID: <55C0743E.1090406@xilinx.com> (raw)
In-Reply-To: <1438305237-18497-3-git-send-email-moritz.fischer@ettus.com>
On 07/31/2015 03:13 AM, Moritz Fischer wrote:
> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
> ---
> arch/arm/boot/dts/zynq-7000.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index 0691508..6bebf02 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -1,5 +1,6 @@
> /*
> * Copyright (C) 2011 - 2014 Xilinx
> + * Copyright (C) 2015 National Instruments Corp.
> *
> * This software is licensed under the terms of the GNU General Public
> * License version 2, as published by the Free Software Foundation, and
> @@ -258,6 +259,13 @@
> reg = <0x100 0x100>;
> };
>
> + rstc: rstc@200 {
> + compatible = "xlnx,zynq-reset";
> + reg = <0x200 0x48>;
> + #reset-cells = <1>;
> + syscon = <&slcr>;
> + };
> +
> pinctrl0: pinctrl@700 {
> compatible = "xlnx,pinctrl-zynq";
> reg = <0x700 0x200>;
>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Thanks,
Michal
next prev parent reply other threads:[~2015-08-04 8:13 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-31 1:13 [RFCv3 0/4] Adding support for Zynq Reset Controller Moritz Fischer
2015-07-31 1:13 ` Moritz Fischer
2015-07-31 1:13 ` [RFCv3 1/4] docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings Moritz Fischer
2015-07-31 1:13 ` Moritz Fischer
2015-08-04 8:09 ` Philipp Zabel
2015-08-04 8:09 ` Philipp Zabel
2015-08-04 8:09 ` Philipp Zabel
2015-08-04 8:18 ` Michal Simek
2015-08-04 8:18 ` Michal Simek
2015-08-04 8:18 ` Michal Simek
2015-08-04 15:05 ` Moritz Fischer
2015-08-04 15:05 ` Moritz Fischer
2015-08-04 15:10 ` Philipp Zabel
2015-08-04 15:10 ` Philipp Zabel
2015-08-05 19:43 ` Moritz Fischer
2015-08-05 19:43 ` Moritz Fischer
2015-08-05 19:43 ` Moritz Fischer
2015-08-06 4:54 ` Michal Simek
2015-08-06 4:54 ` Michal Simek
2015-08-06 4:54 ` Michal Simek
2015-07-31 1:13 ` [RFCv3 2/4] dts: zynq: Add devicetree entry for Xilinx Zynq reset controller Moritz Fischer
2015-07-31 1:13 ` Moritz Fischer
2015-08-04 8:13 ` Michal Simek [this message]
2015-08-04 8:13 ` Michal Simek
2015-08-04 8:13 ` Michal Simek
2015-07-31 1:13 ` [RFCv3 3/4] reset: reset-zynq: Adding support " Moritz Fischer
2015-07-31 1:13 ` Moritz Fischer
2015-07-31 1:13 ` [RFCv3 4/4] ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER Moritz Fischer
2015-07-31 1:13 ` Moritz Fischer
2015-07-31 8:09 ` Michal Simek
2015-07-31 8:09 ` Michal Simek
2015-07-31 8:09 ` Michal Simek
2015-07-31 16:47 ` Sören Brinkmann
2015-07-31 16:47 ` Sören Brinkmann
2015-07-31 16:47 ` Sören Brinkmann
2015-08-04 8:38 ` Philipp Zabel
2015-08-04 8:38 ` Philipp Zabel
2015-08-04 8:38 ` Philipp Zabel
2015-08-04 14:11 ` Sören Brinkmann
2015-08-04 14:11 ` Sören Brinkmann
2015-08-04 14:11 ` Sören Brinkmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55C0743E.1090406@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.