From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Robert Jarzmik <robert.jarzmik@free.fr>,
Sascha Hauer <s.hauer@pengutronix.de>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
barebox@lists.infradead.org,
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Subject: Re: [PATCH 00/17] Armada 370/XP NAND driver
Date: Thu, 15 Oct 2015 23:17:01 +0200 [thread overview]
Message-ID: <562017CD.4050105@gmail.com> (raw)
In-Reply-To: <87wpur3ves.fsf@belgarion.home>
On 13.10.2015 12:38, Robert Jarzmik wrote:
> Sascha Hauer <s.hauer@pengutronix.de> writes:
>
>> In your temporary patch you have:
>>
>>> @@ -67,6 +71,9 @@ static int zylonite_devices_init(void)
>>> &smsc91x_pdata);
>>> add_generic_device("mrvl_nand", DEVICE_ID_DYNAMIC, NULL,
>>> 0x43100000, 0x1000, IORESOURCE_MEM, &nand_pdata);
>>> + clk = clk_get_sys("nand", NULL);
>>> + if (!IS_ERR(clk))
>>> + clkdev_add_physbase(clk, 0x43100000, NULL);
>>
>> Could it be that you register the clk lookup after the nand driver is probed? This
>> hunk should be moved before the nand device registration.
> That's what I had thought, but changing the order gave me a panic, so I didn't
> push forward.
Robert,
I pushed another version of the patch set with the following changes:
- Bail out of mrvl_nand_probe_dt early if
!IS_ENABLED(CONFIG_OFTREE) || host->dev->platform_data
- Move clkdev_add_physbase() before add_generic_device("mrvl_nand")
(Thanks Sascha!)
I hope the issues are resolved now and thanks a lot for testing
again!
Sebastian
> This is what I had, decoded in [1].
>
> Cheers.
>
> --
> Robert
>
> [1] My backtrace with the inversion :
>
> barebox@Zylonite:/ bootm /mnt/tftp/barebox.bin
> bootm /mnt/tftp/barebox.bin
> netconsole: netconsole initialized with 255.255.255.255:6662
> eth0: 100Mbps full duplex link detected
> DHCP client bound to address 192.168.1.232
>
> Loading ARM barebox image '/mnt/tftp/barebox.bin'
> commandline: ram=64M console=ttyS0,115200 mtdparts=pxa3xx_nand-0:128k@0(TIMH)ro,128k@128k(OBMI)ro,768k@256k(barebox),256k@1024k(barebox-env),12M@1280k(kernel),38016k@13568k(root)
> arch_number: 1233
> netconsole: port not set
> netconsole: registered as netconsole-1
> smc91c111 smc91c1110: chip is revision= 9, version= 2
> mdio_bus: miibus0: probed
> eth0: got preset MAC address: 00:0e:0c:a7:26:f7
> zylonite_devices_init(): clk = 83703328
> alloc_nand_resource(): clk_get() -> 83703328
> unable to handle NULL pointer dereference at address 0x00000004
> pc : [<83f15b9c>] lr : [<83f15b90>]
> sp : 83fffed0 ip : 000001b0 fp : 00000000
> r10: 00000002 r9 : 83706888 r8 : 83f8c88c
> r7 : 00000000 r6 : 00000000 r5 : 83706948 r4 : 00000000
> r3 : 83706888 r2 : 43100000 r1 : 83f60783 r0 : 00000000
> Flags: nZCv IRQs off FIQs off Mode SVC_32
> (mrvl_nand_probe+0x1ac/0x650) from device_probe (/drivers/base/driver.c:93)
> (device_probe+0x30/0xb8) from match.part.3 (/drivers/base/driver.c:153)
> (match.part.3+0x44/0x54) from register_device (/drivers/base/driver.c:192)
> (register_device+0x120/0x15c) from add_generic_device (/drivers/base/resource.c:84)
> (add_generic_device+0x3c/0x48) from zylonite_devices_init (/arch/arm/boards/zylonite/board.c:78)
> (zylonite_devices_init+0x9c/0x108) from start_barebox (/common/startup.c:101)
> (start_barebox+0x30/0xe8) from __start (/arch/arm/cpu/start.c:142)
> (__start+0x124/0x13c) from 0x8386c290
>
> (unwind_backtrace+0x0/0x90) from panic (/common/misc.c:209)
> (panic+0x28/0x38) from do_exception (/arch/arm/cpu/interrupts.c:85)
> (do_exception+0x10/0x14) from do_data_abort (/arch/arm/cpu/interrupts.c:139)
> (do_data_abort+0x2c/0x38) from do_abort_6 (:?)
> ### ERROR ### Please RESET the board ###
>
> And a special gift :
> rj@belgarion:~/mio_linux/barebox$ addr2line -i -e barebox 0x83f15b9c
> /home/rj/mio_linux/barebox/drivers/mtd/nand/nand_mrvl_nfc.c:1172
> /home/rj/mio_linux/barebox/drivers/mtd/nand/nand_mrvl_nfc.c:1202
>
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-10-15 21:17 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-08 22:06 [PATCH 00/17] Armada 370/XP NAND driver Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 01/17] arm: pxa: Prepare for NAND clkdev lookup on PXA3xx Sebastian Hesselbarth
2015-10-09 19:11 ` Robert Jarzmik
2015-10-09 19:13 ` Robert Jarzmik
2015-10-10 8:34 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 02/17] mtd: nand_mrvl_nfc: Use common clock for core clock Sebastian Hesselbarth
2015-10-10 8:35 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 03/17] mtd: nand: Clarify Marvell Orion Kconfig prompt Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 04/17] arm: pxa: Remove pxa_get_nandclk() Sebastian Hesselbarth
2015-10-10 8:35 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 05/17] mtd: nand_mrvl_nfc: Remove keep_config Sebastian Hesselbarth
2015-10-09 19:16 ` Robert Jarzmik
2015-10-09 19:32 ` Sebastian Hesselbarth
2015-10-09 21:14 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 06/17] mtd: nand_mrvl_nfc: Clear OOB data with 0xff instead of 0x00 Sebastian Hesselbarth
2015-10-10 8:38 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 07/17] mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase Sebastian Hesselbarth
2015-10-10 8:44 ` Robert Jarzmik
2015-10-10 9:36 ` Sebastian Hesselbarth
2015-10-10 9:49 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 08/17] mtd: nand_mrvl_nfc: Fix num-cs property parsing Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 09/17] mtd: nand_mrvl_nfc: Get ecc parameters from DT Sebastian Hesselbarth
2015-10-11 20:39 ` Robert Jarzmik
2015-10-12 6:28 ` Sascha Hauer
2015-10-12 7:32 ` Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 10/17] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 11/17] mtd: nand_mrvl_nfc: Add hwflags to distinguish different HW versions Sebastian Hesselbarth
2015-10-12 6:33 ` Sascha Hauer
2015-10-08 22:06 ` [PATCH 12/17] mtd: nand_mrvl_nfc: Add support for 4bit BCH HW ECC Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 13/17] mtd: nand_mrvl_nfc: Add support for 8bit " Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 14/17] mtd: nand_mrvl_nfc: Add support for HW BCH ECC Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 15/17] mtd: nand_mrvl_nfc: Add support for NDCB3 register Sebastian Hesselbarth
2015-10-10 8:48 ` Robert Jarzmik
2015-10-10 17:17 ` Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 16/17] mtd: nand_mrvl_nfc: Add support for Marvell Armada 370/XP Sebastian Hesselbarth
2015-10-10 8:48 ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 17/17] mtd: nand_mrvl_nfc: Add optimized timings for Samsung K9K8G08U Sebastian Hesselbarth
2015-10-12 10:38 ` [PATCH 00/17] Armada 370/XP NAND driver Robert Jarzmik
2015-10-12 18:41 ` Sebastian Hesselbarth
2015-10-12 19:16 ` Robert Jarzmik
2015-10-12 19:59 ` Sebastian Hesselbarth
2015-10-13 9:35 ` Robert Jarzmik
2015-10-13 9:53 ` Sebastian Hesselbarth
2015-10-13 10:27 ` Sascha Hauer
2015-10-13 10:38 ` Robert Jarzmik
2015-10-13 10:54 ` Sascha Hauer
2015-10-15 21:17 ` Sebastian Hesselbarth [this message]
2015-10-16 18:40 ` Robert Jarzmik
2015-10-16 19:32 ` Sebastian Hesselbarth
2015-10-20 19:25 ` Robert Jarzmik
2015-11-19 23:16 ` Sebastian Hesselbarth
2015-11-20 7:18 ` Robert Jarzmik
2015-10-12 17:55 ` [PATCH] of: mtd: Import of_get_nand_ecc_{step_size, strength} from Linux Sebastian Hesselbarth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=562017CD.4050105@gmail.com \
--to=sebastian.hesselbarth@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=robert.jarzmik@free.fr \
--cc=s.hauer@pengutronix.de \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.