All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Jarzmik <robert.jarzmik@free.fr>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
	barebox@lists.infradead.org,
	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Subject: Re: [PATCH 00/17] Armada 370/XP NAND driver
Date: Tue, 13 Oct 2015 12:38:51 +0200	[thread overview]
Message-ID: <87wpur3ves.fsf@belgarion.home> (raw)
In-Reply-To: <20151013102725.GH7858@pengutronix.de> (Sascha Hauer's message of "Tue, 13 Oct 2015 12:27:25 +0200")

Sascha Hauer <s.hauer@pengutronix.de> writes:

> In your temporary patch you have:
>
>> @@ -67,6 +71,9 @@ static int zylonite_devices_init(void)
>>  			   &smsc91x_pdata);
>>  	add_generic_device("mrvl_nand", DEVICE_ID_DYNAMIC, NULL,
>>  			   0x43100000, 0x1000, IORESOURCE_MEM, &nand_pdata);
>> +	clk = clk_get_sys("nand", NULL);
>> +	if (!IS_ERR(clk))
>> +		clkdev_add_physbase(clk, 0x43100000, NULL);
>
> Could it be that you register the clk lookup after the nand driver is probed? This
> hunk should be moved before the nand device registration.
That's what I had thought, but changing the order gave me a panic, so I didn't
push forward.

This is what I had, decoded in [1].

Cheers.

--
Robert

[1] My backtrace with the inversion :

barebox@Zylonite:/ bootm /mnt/tftp/barebox.bin
bootm /mnt/tftp/barebox.bin
netconsole: netconsole initialized with 255.255.255.255:6662
eth0: 100Mbps full duplex link detected
DHCP client bound to address 192.168.1.232

Loading ARM barebox image '/mnt/tftp/barebox.bin'
commandline: ram=64M console=ttyS0,115200   mtdparts=pxa3xx_nand-0:128k@0(TIMH)ro,128k@128k(OBMI)ro,768k@256k(barebox),256k@1024k(barebox-env),12M@1280k(kernel),38016k@13568k(root)
arch_number: 1233
netconsole: port not set
netconsole: registered as netconsole-1
smc91c111 smc91c1110: chip is revision= 9, version= 2
mdio_bus: miibus0: probed
eth0: got preset MAC address: 00:0e:0c:a7:26:f7
zylonite_devices_init(): clk = 83703328
alloc_nand_resource(): clk_get() -> 83703328
unable to handle NULL pointer dereference at address 0x00000004
pc : [<83f15b9c>]    lr : [<83f15b90>]
sp : 83fffed0  ip : 000001b0  fp : 00000000
r10: 00000002  r9 : 83706888  r8 : 83f8c88c
r7 : 00000000  r6 : 00000000  r5 : 83706948  r4 : 00000000
r3 : 83706888  r2 : 43100000  r1 : 83f60783  r0 : 00000000
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
(mrvl_nand_probe+0x1ac/0x650) from device_probe (/drivers/base/driver.c:93)
(device_probe+0x30/0xb8) from match.part.3 (/drivers/base/driver.c:153)
(match.part.3+0x44/0x54) from register_device (/drivers/base/driver.c:192)
(register_device+0x120/0x15c) from add_generic_device (/drivers/base/resource.c:84)
(add_generic_device+0x3c/0x48) from zylonite_devices_init (/arch/arm/boards/zylonite/board.c:78)
(zylonite_devices_init+0x9c/0x108) from start_barebox (/common/startup.c:101)
(start_barebox+0x30/0xe8) from __start (/arch/arm/cpu/start.c:142)
(__start+0x124/0x13c) from 0x8386c290

(unwind_backtrace+0x0/0x90) from panic (/common/misc.c:209)
(panic+0x28/0x38) from do_exception (/arch/arm/cpu/interrupts.c:85)
(do_exception+0x10/0x14) from do_data_abort (/arch/arm/cpu/interrupts.c:139)
(do_data_abort+0x2c/0x38) from do_abort_6 (:?)
### ERROR ### Please RESET the board ###

And a special gift :
rj@belgarion:~/mio_linux/barebox$ addr2line -i -e barebox 0x83f15b9c
/home/rj/mio_linux/barebox/drivers/mtd/nand/nand_mrvl_nfc.c:1172
/home/rj/mio_linux/barebox/drivers/mtd/nand/nand_mrvl_nfc.c:1202

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2015-10-13 10:44 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-08 22:06 [PATCH 00/17] Armada 370/XP NAND driver Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 01/17] arm: pxa: Prepare for NAND clkdev lookup on PXA3xx Sebastian Hesselbarth
2015-10-09 19:11   ` Robert Jarzmik
2015-10-09 19:13     ` Robert Jarzmik
2015-10-10  8:34   ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 02/17] mtd: nand_mrvl_nfc: Use common clock for core clock Sebastian Hesselbarth
2015-10-10  8:35   ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 03/17] mtd: nand: Clarify Marvell Orion Kconfig prompt Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 04/17] arm: pxa: Remove pxa_get_nandclk() Sebastian Hesselbarth
2015-10-10  8:35   ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 05/17] mtd: nand_mrvl_nfc: Remove keep_config Sebastian Hesselbarth
2015-10-09 19:16   ` Robert Jarzmik
2015-10-09 19:32     ` Sebastian Hesselbarth
2015-10-09 21:14       ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 06/17] mtd: nand_mrvl_nfc: Clear OOB data with 0xff instead of 0x00 Sebastian Hesselbarth
2015-10-10  8:38   ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 07/17] mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase Sebastian Hesselbarth
2015-10-10  8:44   ` Robert Jarzmik
2015-10-10  9:36     ` Sebastian Hesselbarth
2015-10-10  9:49       ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 08/17] mtd: nand_mrvl_nfc: Fix num-cs property parsing Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 09/17] mtd: nand_mrvl_nfc: Get ecc parameters from DT Sebastian Hesselbarth
2015-10-11 20:39   ` Robert Jarzmik
2015-10-12  6:28     ` Sascha Hauer
2015-10-12  7:32       ` Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 10/17] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 11/17] mtd: nand_mrvl_nfc: Add hwflags to distinguish different HW versions Sebastian Hesselbarth
2015-10-12  6:33   ` Sascha Hauer
2015-10-08 22:06 ` [PATCH 12/17] mtd: nand_mrvl_nfc: Add support for 4bit BCH HW ECC Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 13/17] mtd: nand_mrvl_nfc: Add support for 8bit " Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 14/17] mtd: nand_mrvl_nfc: Add support for HW BCH ECC Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 15/17] mtd: nand_mrvl_nfc: Add support for NDCB3 register Sebastian Hesselbarth
2015-10-10  8:48   ` Robert Jarzmik
2015-10-10 17:17     ` Sebastian Hesselbarth
2015-10-08 22:06 ` [PATCH 16/17] mtd: nand_mrvl_nfc: Add support for Marvell Armada 370/XP Sebastian Hesselbarth
2015-10-10  8:48   ` Robert Jarzmik
2015-10-08 22:06 ` [PATCH 17/17] mtd: nand_mrvl_nfc: Add optimized timings for Samsung K9K8G08U Sebastian Hesselbarth
2015-10-12 10:38 ` [PATCH 00/17] Armada 370/XP NAND driver Robert Jarzmik
2015-10-12 18:41   ` Sebastian Hesselbarth
2015-10-12 19:16     ` Robert Jarzmik
2015-10-12 19:59       ` Sebastian Hesselbarth
2015-10-13  9:35         ` Robert Jarzmik
2015-10-13  9:53           ` Sebastian Hesselbarth
2015-10-13 10:27             ` Sascha Hauer
2015-10-13 10:38               ` Robert Jarzmik [this message]
2015-10-13 10:54                 ` Sascha Hauer
2015-10-15 21:17                 ` Sebastian Hesselbarth
2015-10-16 18:40                   ` Robert Jarzmik
2015-10-16 19:32                     ` Sebastian Hesselbarth
2015-10-20 19:25                     ` Robert Jarzmik
2015-11-19 23:16                       ` Sebastian Hesselbarth
2015-11-20  7:18                         ` Robert Jarzmik
2015-10-12 17:55 ` [PATCH] of: mtd: Import of_get_nand_ecc_{step_size, strength} from Linux Sebastian Hesselbarth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87wpur3ves.fsf@belgarion.home \
    --to=robert.jarzmik@free.fr \
    --cc=barebox@lists.infradead.org \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=s.hauer@pengutronix.de \
    --cc=thomas.petazzoni@free-electrons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.