From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Alim Akhtar <alim.akhtar@samsung.com>,
lee.jones@linaro.org, broonie@kernel.org
Cc: mturquette@baylibre.com, linux-samsung-soc@vger.kernel.org,
linux-clk@vger.kernel.org, rtc-linux@googlegroups.com,
linux-kernel@vger.kernel.org,
Thomas Abraham <thomas.ab@samsung.com>
Subject: Re: [PATCH v3 2/5] mfd: sec: Add support for S2MPS15 PMIC
Date: Wed, 28 Oct 2015 10:28:05 +0900 [thread overview]
Message-ID: <563024A5.1050705@samsung.com> (raw)
In-Reply-To: <1445863883-5187-3-git-send-email-alim.akhtar@samsung.com>
On 26.10.2015 21:51, Alim Akhtar wrote:
> From: Thomas Abraham <thomas.ab@samsung.com>
>
> Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
> PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
> clock outputs and battery charger. This patch adds initial support for
> LDO and buck regulators of S2MPS15 device.
>
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> [Alim: Added s2mps15_devs like rtc and clk and related changes]
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
> drivers/mfd/sec-core.c | 31 +++++++
> drivers/mfd/sec-irq.c | 8 ++
> include/linux/mfd/samsung/core.h | 1 +
> include/linux/mfd/samsung/s2mps15.h | 158 +++++++++++++++++++++++++++++++++++
> 4 files changed, 198 insertions(+)
> create mode 100644 include/linux/mfd/samsung/s2mps15.h
>
> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> index 2626fc0b5b8c..db3d4d4ff805 100644
> --- a/drivers/mfd/sec-core.c
> +++ b/drivers/mfd/sec-core.c
> @@ -29,6 +29,7 @@
> #include <linux/mfd/samsung/s2mps11.h>
> #include <linux/mfd/samsung/s2mps13.h>
> #include <linux/mfd/samsung/s2mps14.h>
> +#include <linux/mfd/samsung/s2mps15.h>
> #include <linux/mfd/samsung/s2mpu02.h>
> #include <linux/mfd/samsung/s5m8763.h>
> #include <linux/mfd/samsung/s5m8767.h>
> @@ -96,6 +97,17 @@ static const struct mfd_cell s2mps14_devs[] = {
> }
> };
>
> +static const struct mfd_cell s2mps15_devs[] = {
> + {
> + .name = "s2mps15-pmic",
> + }, {
> + .name = "s2mps15-rtc",
> + }, {
> + .name = "s2mps15-clk",
> + .of_compatible = "samsung,s2mps15-clk",
> + },
I have different questions here. RTC and CLK module look the same as
S2MPS14. Then you should existing compatibles and names.
I'll ask in details about this in separate emails for patch 4 and 5.
Until questions are resolved, these looks wrong.
Best regards,
Krzysztof
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Alim Akhtar <alim.akhtar@samsung.com>,
lee.jones@linaro.org, broonie@kernel.org
Cc: mturquette@baylibre.com, linux-samsung-soc@vger.kernel.org,
linux-clk@vger.kernel.org, rtc-linux@googlegroups.com,
linux-kernel@vger.kernel.org,
Thomas Abraham <thomas.ab@samsung.com>
Subject: [rtc-linux] Re: [PATCH v3 2/5] mfd: sec: Add support for S2MPS15 PMIC
Date: Wed, 28 Oct 2015 10:28:05 +0900 [thread overview]
Message-ID: <563024A5.1050705@samsung.com> (raw)
In-Reply-To: <1445863883-5187-3-git-send-email-alim.akhtar@samsung.com>
On 26.10.2015 21:51, Alim Akhtar wrote:
> From: Thomas Abraham <thomas.ab@samsung.com>
>
> Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
> PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
> clock outputs and battery charger. This patch adds initial support for
> LDO and buck regulators of S2MPS15 device.
>
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> [Alim: Added s2mps15_devs like rtc and clk and related changes]
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
> drivers/mfd/sec-core.c | 31 +++++++
> drivers/mfd/sec-irq.c | 8 ++
> include/linux/mfd/samsung/core.h | 1 +
> include/linux/mfd/samsung/s2mps15.h | 158 +++++++++++++++++++++++++++++++++++
> 4 files changed, 198 insertions(+)
> create mode 100644 include/linux/mfd/samsung/s2mps15.h
>
> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> index 2626fc0b5b8c..db3d4d4ff805 100644
> --- a/drivers/mfd/sec-core.c
> +++ b/drivers/mfd/sec-core.c
> @@ -29,6 +29,7 @@
> #include <linux/mfd/samsung/s2mps11.h>
> #include <linux/mfd/samsung/s2mps13.h>
> #include <linux/mfd/samsung/s2mps14.h>
> +#include <linux/mfd/samsung/s2mps15.h>
> #include <linux/mfd/samsung/s2mpu02.h>
> #include <linux/mfd/samsung/s5m8763.h>
> #include <linux/mfd/samsung/s5m8767.h>
> @@ -96,6 +97,17 @@ static const struct mfd_cell s2mps14_devs[] = {
> }
> };
>
> +static const struct mfd_cell s2mps15_devs[] = {
> + {
> + .name = "s2mps15-pmic",
> + }, {
> + .name = "s2mps15-rtc",
> + }, {
> + .name = "s2mps15-clk",
> + .of_compatible = "samsung,s2mps15-clk",
> + },
I have different questions here. RTC and CLK module look the same as
S2MPS14. Then you should existing compatibles and names.
I'll ask in details about this in separate emails for patch 4 and 5.
Until questions are resolved, these looks wrong.
Best regards,
Krzysztof
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2015-10-28 1:28 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-26 12:51 [PATCH v3 0/5] mfd: sec: add S2MPS15 PMIC support Alim Akhtar
2015-10-26 12:51 ` [rtc-linux] " Alim Akhtar
2015-10-26 12:51 ` [PATCH v3 1/5] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC Alim Akhtar
2015-10-26 12:51 ` [rtc-linux] " Alim Akhtar
2015-10-26 12:51 ` [PATCH v3 2/5] mfd: sec: Add support for S2MPS15 PMIC Alim Akhtar
2015-10-26 12:51 ` [rtc-linux] " Alim Akhtar
2015-10-26 14:34 ` Lee Jones
2015-10-26 14:34 ` [rtc-linux] " Lee Jones
2015-10-28 1:15 ` Krzysztof Kozlowski
2015-10-28 1:15 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-28 8:46 ` Lee Jones
2015-10-28 8:46 ` [rtc-linux] " Lee Jones
2015-10-28 11:21 ` Alim Akhtar
2015-10-28 11:21 ` [rtc-linux] " Alim Akhtar
2015-10-28 13:47 ` Krzysztof Kozlowski
2015-10-28 13:47 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-28 13:44 ` Krzysztof Kozlowski
2015-10-28 13:44 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-28 13:51 ` Lee Jones
2015-10-28 13:51 ` [rtc-linux] " Lee Jones
2015-10-29 4:19 ` Alim Akhtar
2015-10-29 4:19 ` [rtc-linux] " Alim Akhtar
2015-10-28 1:28 ` Krzysztof Kozlowski [this message]
2015-10-28 1:28 ` Krzysztof Kozlowski
2015-10-26 12:51 ` [PATCH v3 3/5] regulator: s2mps11: add support for S2MPS15 regulators Alim Akhtar
2015-10-26 12:51 ` [rtc-linux] " Alim Akhtar
2015-10-26 12:51 ` [PATCH v3 4/5] clk: s2mps15: Add support for S2MPS15 clocks Alim Akhtar
2015-10-26 12:51 ` [rtc-linux] " Alim Akhtar
2015-10-28 1:22 ` Krzysztof Kozlowski
2015-10-28 1:22 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-28 3:36 ` Alim Akhtar
2015-10-28 3:36 ` [rtc-linux] " Alim Akhtar
2015-10-28 1:26 ` Krzysztof Kozlowski
2015-10-28 1:26 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-28 4:34 ` Krzysztof Kozlowski
2015-10-28 4:34 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-28 4:55 ` Alim Akhtar
2015-10-28 4:55 ` [rtc-linux] " Alim Akhtar
2015-10-28 5:36 ` Krzysztof Kozlowski
2015-10-28 5:36 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-26 12:51 ` [PATCH v3 5/5] drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC Alim Akhtar
2015-10-26 12:51 ` [rtc-linux] " Alim Akhtar
2015-10-27 22:59 ` Alexandre Belloni
2015-10-27 22:59 ` Alexandre Belloni
2015-10-28 1:29 ` Krzysztof Kozlowski
2015-10-28 1:29 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-28 1:53 ` Mark Brown
2015-10-28 1:53 ` [rtc-linux] " Mark Brown
2015-10-28 2:17 ` Krzysztof Kozlowski
2015-10-28 2:17 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-28 3:14 ` Alim Akhtar
2015-10-28 3:14 ` [rtc-linux] " Alim Akhtar
2015-10-28 3:31 ` Krzysztof Kozlowski
2015-10-28 3:31 ` [rtc-linux] " Krzysztof Kozlowski
2015-10-28 3:33 ` Alim Akhtar
2015-10-28 3:33 ` [rtc-linux] " Alim Akhtar
2015-10-28 9:48 ` Alexandre Belloni
2015-10-28 9:48 ` Alexandre Belloni
2015-10-28 10:30 ` Alim Akhtar
2015-10-28 10:30 ` Alim Akhtar
2015-10-28 13:35 ` Krzysztof Kozlowski
2015-10-28 13:35 ` Krzysztof Kozlowski
2015-10-28 13:31 ` Krzysztof Kozlowski
2015-10-28 13:31 ` Krzysztof Kozlowski
2015-10-28 13:43 ` Alexandre Belloni
2015-10-28 13:43 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=563024A5.1050705@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=alim.akhtar@samsung.com \
--cc=broonie@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rtc-linux@googlegroups.com \
--cc=thomas.ab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.