From: Chanwoo Choi <cw00.choi@samsung.com>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>,
myungjoo.ham@samsung.com, kyungmin.park@samsung.com,
kgene@kernel.org, s.nawrocki@samsung.com, tomasz.figa@gmail.com
Cc: rjw@rjwysocki.net, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, linux@arm.linux.org.uk,
linux.amoon@gmail.com, m.reichl@fivetechno.de,
tjakobi@math.uni-bielefeld.de, inki.dae@samsung.com,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 6/7] ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC
Date: Thu, 14 Apr 2016 08:16:47 +0900 [thread overview]
Message-ID: <570ED35F.8030401@samsung.com> (raw)
In-Reply-To: <570CD3AF.8040206@samsung.com>
On 2016년 04월 12일 19:53, Krzysztof Kozlowski wrote:
> On 04/08/2016 07:00 AM, Chanwoo Choi wrote:
>> This patch adds the AMBA bus nodes using VDD_INT for Exynos542x SoC.
>> Exynos542x has the following AMBA buses to translate data between
>> DRAM and sub-blocks.
>>
>> Following list specifies the detailed correlation between sub-block and clock:
>> - CLK_DOUT_ACLK400_WCORE clock for WCORE's AXI
>> - CLK_DOUT_ACLK100_NOC for NoC (Network on Chip)'s AXI
>> - CLK_DOUT_PCLK200_FSYS for FSYS's APB
>> - CLK_DOUT_ACLK200_FSYS for FSYS's AXI
>> - CLK_DOUT_ACLK200_FSYS2 for FSYS2's AXI
>> - CLK_DOUT_ACLK333 for MFC's AXI
>> - CLK_DOUT_ACLK266 for GEN's AXI
>> - CLK_DOUT_ACLK66 for PERIC/PERIR's AXI
>> - CLK_DOUT_ACLK333_G2D for G2D's AXI
>> - CLK_DOUT_ACLK266_G2D for ACP's AXI
>> - CLK_DOUT_ACLK300_JPEG for JPEG's AXI
>> - CLK_DOUT_ACLK166 for JPEG's APB
>> - CLK_DOUT_ACLK300_DISP1 for FIMD's AXI
>> - CLK_DOUT_ACLK400_DISP1 for DISP1's AXI
>> - CLK_DOUT_ACLK300_GSCL for GSCL Scaler's AXI
>> - CLK_DOUT_ACLK400_MSCL for MSCL's AXI
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos5420.dtsi | 371 ++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 371 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
>> index d80f3b66f017..1340024fa882 100644
>> --- a/arch/arm/boot/dts/exynos5420.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420.dtsi
>> @@ -1224,6 +1224,377 @@
>> power-domains = <&disp_pd>;
>> #iommu-cells = <0>;
>> };
>> +
>> + bus_wcore: bus_wcore {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_wcore_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_noc: bus_noc {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK100_NOC>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_noc_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_fsys_apb: bus_fsys_apb {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_fsys_apb_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_fsys: bus_fsys {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_fsys_apb_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_fsys2: bus_fsys2 {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_fsys2_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_mfc: bus_mfc {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK333>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_mfc_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_gen: bus_gen {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK266>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_gen_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_peri: bus_peri {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK66>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_peri_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_g2d: bus_g2d {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK333_G2D>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_g2d_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_g2d_acp: bus_g2d_acp {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK266_G2D>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_g2d_acp_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_jpeg: bus_jpeg {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_jpeg_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_jpeg_apb: bus_jpeg_apb {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK166>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_jpeg_apb_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_disp1_fimd: bus_disp1_fimd {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_disp1_fimd_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_disp1: bus_disp1 {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_disp1_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_gscl_scaler: bus_gscl_scaler {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_gscl_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_mscl: bus_mscl {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_mscl_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_wcore_opp_table: opp_table2 {
>> + compatible = "operating-points-v2";
>> +
>> + opp00 {
>> + opp-hz = /bits/ 64 <84000000>;
>> + opp-microvolt = <925000>;
>> + };
>> + opp01 {
>> + opp-hz = /bits/ 64 <111000000>;
>> + opp-microvolt = <950000>;
>> + };
>> + opp02 {
>> + opp-hz = /bits/ 64 <222000000>;
>> + opp-microvolt = <950000>;
>> + };
>> + opp03 {
>> + opp-hz = /bits/ 64 <333000000>;
>> + opp-microvolt = <950000>;
>> + };
>> + opp04 {
>> + opp-hz = /bits/ 64 <400000000>;
>> + opp-microvolt = <987500>;
>> + };
>> + };
>> +
>> + bus_noc_opp_table: opp_table3 {
>> + compatible = "operating-points-v2";
>> +
>> + opp00 {
>> + opp-hz = /bits/ 64 <66000000>;
>
> 67000000 so it won't be round down?
I'll change it. 66000000 -> 67000000.
>
> Beside that looks good. I am assuming the same apply strategy - I can
> take the DTS changes the bindings got accepted.
>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Thanks for the review.
Best Regards,
Chanwoo Choi
WARNING: multiple messages have this Message-ID (diff)
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/7] ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC
Date: Thu, 14 Apr 2016 08:16:47 +0900 [thread overview]
Message-ID: <570ED35F.8030401@samsung.com> (raw)
In-Reply-To: <570CD3AF.8040206@samsung.com>
On 2016? 04? 12? 19:53, Krzysztof Kozlowski wrote:
> On 04/08/2016 07:00 AM, Chanwoo Choi wrote:
>> This patch adds the AMBA bus nodes using VDD_INT for Exynos542x SoC.
>> Exynos542x has the following AMBA buses to translate data between
>> DRAM and sub-blocks.
>>
>> Following list specifies the detailed correlation between sub-block and clock:
>> - CLK_DOUT_ACLK400_WCORE clock for WCORE's AXI
>> - CLK_DOUT_ACLK100_NOC for NoC (Network on Chip)'s AXI
>> - CLK_DOUT_PCLK200_FSYS for FSYS's APB
>> - CLK_DOUT_ACLK200_FSYS for FSYS's AXI
>> - CLK_DOUT_ACLK200_FSYS2 for FSYS2's AXI
>> - CLK_DOUT_ACLK333 for MFC's AXI
>> - CLK_DOUT_ACLK266 for GEN's AXI
>> - CLK_DOUT_ACLK66 for PERIC/PERIR's AXI
>> - CLK_DOUT_ACLK333_G2D for G2D's AXI
>> - CLK_DOUT_ACLK266_G2D for ACP's AXI
>> - CLK_DOUT_ACLK300_JPEG for JPEG's AXI
>> - CLK_DOUT_ACLK166 for JPEG's APB
>> - CLK_DOUT_ACLK300_DISP1 for FIMD's AXI
>> - CLK_DOUT_ACLK400_DISP1 for DISP1's AXI
>> - CLK_DOUT_ACLK300_GSCL for GSCL Scaler's AXI
>> - CLK_DOUT_ACLK400_MSCL for MSCL's AXI
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos5420.dtsi | 371 ++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 371 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
>> index d80f3b66f017..1340024fa882 100644
>> --- a/arch/arm/boot/dts/exynos5420.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420.dtsi
>> @@ -1224,6 +1224,377 @@
>> power-domains = <&disp_pd>;
>> #iommu-cells = <0>;
>> };
>> +
>> + bus_wcore: bus_wcore {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_wcore_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_noc: bus_noc {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK100_NOC>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_noc_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_fsys_apb: bus_fsys_apb {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_fsys_apb_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_fsys: bus_fsys {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_fsys_apb_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_fsys2: bus_fsys2 {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_fsys2_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_mfc: bus_mfc {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK333>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_mfc_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_gen: bus_gen {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK266>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_gen_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_peri: bus_peri {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK66>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_peri_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_g2d: bus_g2d {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK333_G2D>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_g2d_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_g2d_acp: bus_g2d_acp {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK266_G2D>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_g2d_acp_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_jpeg: bus_jpeg {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_jpeg_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_jpeg_apb: bus_jpeg_apb {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK166>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_jpeg_apb_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_disp1_fimd: bus_disp1_fimd {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_disp1_fimd_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_disp1: bus_disp1 {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_disp1_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_gscl_scaler: bus_gscl_scaler {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_gscl_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_mscl: bus_mscl {
>> + compatible = "samsung,exynos-bus";
>> + clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
>> + clock-names = "bus";
>> + operating-points-v2 = <&bus_mscl_opp_table>;
>> + status = "disabled";
>> + };
>> +
>> + bus_wcore_opp_table: opp_table2 {
>> + compatible = "operating-points-v2";
>> +
>> + opp00 {
>> + opp-hz = /bits/ 64 <84000000>;
>> + opp-microvolt = <925000>;
>> + };
>> + opp01 {
>> + opp-hz = /bits/ 64 <111000000>;
>> + opp-microvolt = <950000>;
>> + };
>> + opp02 {
>> + opp-hz = /bits/ 64 <222000000>;
>> + opp-microvolt = <950000>;
>> + };
>> + opp03 {
>> + opp-hz = /bits/ 64 <333000000>;
>> + opp-microvolt = <950000>;
>> + };
>> + opp04 {
>> + opp-hz = /bits/ 64 <400000000>;
>> + opp-microvolt = <987500>;
>> + };
>> + };
>> +
>> + bus_noc_opp_table: opp_table3 {
>> + compatible = "operating-points-v2";
>> +
>> + opp00 {
>> + opp-hz = /bits/ 64 <66000000>;
>
> 67000000 so it won't be round down?
I'll change it. 66000000 -> 67000000.
>
> Beside that looks good. I am assuming the same apply strategy - I can
> take the DTS changes the bindings got accepted.
>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Thanks for the review.
Best Regards,
Chanwoo Choi
next prev parent reply other threads:[~2016-04-13 23:16 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-08 5:00 [PATCH 0/7] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3 Chanwoo Choi
2016-04-08 5:00 ` Chanwoo Choi
2016-04-08 5:00 ` [PATCH 1/7] PM / devfreq: event: Add new Exynos NoC probe driver Chanwoo Choi
2016-04-08 5:00 ` Chanwoo Choi
2016-04-08 5:00 ` Chanwoo Choi
2016-04-12 8:07 ` Krzysztof Kozlowski
2016-04-12 8:07 ` Krzysztof Kozlowski
2016-04-15 5:13 ` Chanwoo Choi
2016-04-15 5:13 ` Chanwoo Choi
2016-04-08 5:00 ` [PATCH 2/7] PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus Chanwoo Choi
2016-04-08 5:00 ` Chanwoo Choi
2016-04-11 15:45 ` Rob Herring
2016-04-11 15:45 ` Rob Herring
2016-04-15 6:08 ` Chanwoo Choi
2016-04-15 6:08 ` Chanwoo Choi
[not found] ` <1460091646-28701-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-04-08 5:00 ` [PATCH 3/7] ARM: dts: Add NoC Probe dt node for Exynos542x SoC Chanwoo Choi
2016-04-08 5:00 ` Chanwoo Choi
2016-04-08 5:00 ` Chanwoo Choi
2016-04-12 8:14 ` Krzysztof Kozlowski
2016-04-12 8:14 ` Krzysztof Kozlowski
2016-04-14 5:48 ` Chanwoo Choi
2016-04-14 5:48 ` Chanwoo Choi
2016-04-08 5:00 ` [PATCH 4/7] dt-bindings: clock: Add the clock id for ACLK clock of " Chanwoo Choi
2016-04-08 5:00 ` Chanwoo Choi
2016-04-12 11:29 ` Krzysztof Kozlowski
2016-04-12 11:29 ` Krzysztof Kozlowski
2016-04-08 5:00 ` [PATCH 5/7] clk: samsung: exynos542x: Add the clock id for ACLK Chanwoo Choi
2016-04-08 5:00 ` Chanwoo Choi
2016-04-12 11:25 ` Krzysztof Kozlowski
2016-04-12 11:25 ` Krzysztof Kozlowski
2016-04-13 6:20 ` Tomasz Figa
2016-04-13 6:20 ` Tomasz Figa
2016-04-14 6:28 ` Chanwoo Choi
2016-04-14 6:28 ` Chanwoo Choi
2016-04-08 5:00 ` [PATCH 6/7] ARM: dts: Add bus nodes using VDD_INT for Exynos542x SoC Chanwoo Choi
2016-04-08 5:00 ` Chanwoo Choi
2016-04-12 10:53 ` Krzysztof Kozlowski
2016-04-12 10:53 ` Krzysztof Kozlowski
2016-04-13 23:16 ` Chanwoo Choi [this message]
2016-04-13 23:16 ` Chanwoo Choi
2016-04-08 5:00 ` [PATCH 7/7] ARM: dts: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3 Chanwoo Choi
2016-04-08 5:00 ` Chanwoo Choi
2016-04-08 5:00 ` Chanwoo Choi
2016-04-12 10:59 ` Krzysztof Kozlowski
2016-04-12 10:59 ` Krzysztof Kozlowski
2016-04-13 23:14 ` Chanwoo Choi
2016-04-13 23:14 ` Chanwoo Choi
2016-04-08 12:55 ` [PATCH 0/7] PM / devfreq: Add NoCP devfreq-event and support busfreq on exyno5422-odroidxu3 Markus Reichl
2016-04-08 12:55 ` Markus Reichl
2016-04-08 12:55 ` Markus Reichl
2016-04-08 18:25 ` Chanwoo Choi
2016-04-08 18:25 ` Chanwoo Choi
2016-04-08 18:25 ` Chanwoo Choi
2016-04-08 18:11 ` Anand Moon
2016-04-08 18:11 ` Anand Moon
[not found] ` <CANAwSgQuWBRiRhjd-E-WaSdhe2njE262CEG8uVH83jJDGFJVKA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-04-08 18:24 ` Chanwoo Choi
2016-04-08 18:24 ` Chanwoo Choi
2016-04-08 18:24 ` Chanwoo Choi
2016-04-11 2:16 ` Chanwoo Choi
2016-04-11 2:16 ` Chanwoo Choi
2016-04-11 2:16 ` Chanwoo Choi
2016-04-11 4:01 ` Anand Moon
2016-04-11 4:01 ` Anand Moon
2016-04-11 4:01 ` Anand Moon
2016-04-11 4:03 ` Chanwoo Choi
2016-04-11 4:03 ` Chanwoo Choi
2016-04-11 4:03 ` Chanwoo Choi
2016-04-11 4:15 ` Chanwoo Choi
2016-04-11 4:15 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=570ED35F.8030401@samsung.com \
--to=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=inki.dae@samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux.amoon@gmail.com \
--cc=linux@arm.linux.org.uk \
--cc=m.reichl@fivetechno.de \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
--cc=pawel.moll@arm.com \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=tjakobi@math.uni-bielefeld.de \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.