[PATCH 0/2] arm: dra7: Add i2c6 instance hwmod and dt entries

[PATCH 0/2] arm: dra7: Add i2c6 instance hwmod and dt entries

[Ravikumar Kattekola]

DRA72x devices have a sixth i2c ocntroller instance.
Following patches add the required hwmod structure and
device tree nodes.

Reference doc: DRA72x TRM [ SPRUHP2Q ]

Tested on :
DRA72x Rev B EVM

Ravikumar Kattekola (2):
  arm: dra7: Add hwmod entry for i2c6
  dts: dra7: Add device tree node for i2c6

 arch/arm/boot/dts/dra7.dtsi               | 11 +++++++++++
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
 2 files changed, 34 insertions(+)

-- 
2.8.2.396.g5fe494c

[PATCH 0/2] arm: dra7: Add i2c6 instance hwmod and dt entries

[Ravikumar Kattekola]

DRA72x devices have a sixth i2c ocntroller instance.
Following patches add the required hwmod structure and
device tree nodes.

Reference doc: DRA72x TRM [ SPRUHP2Q ]

Tested on :
DRA72x Rev B EVM

Ravikumar Kattekola (2):
  arm: dra7: Add hwmod entry for i2c6
  dts: dra7: Add device tree node for i2c6

 arch/arm/boot/dts/dra7.dtsi               | 11 +++++++++++
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
 2 files changed, 34 insertions(+)

-- 
2.8.2.396.g5fe494c

[PATCH 0/2] arm: dra7: Add i2c6 instance hwmod and dt entries

[Ravikumar Kattekola]

DRA72x devices have a sixth i2c ocntroller instance.
Following patches add the required hwmod structure and
device tree nodes.

Reference doc: DRA72x TRM [ SPRUHP2Q ]

Tested on :
DRA72x Rev B EVM

Ravikumar Kattekola (2):
  arm: dra7: Add hwmod entry for i2c6
  dts: dra7: Add device tree node for i2c6

 arch/arm/boot/dts/dra7.dtsi               | 11 +++++++++++
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
 2 files changed, 34 insertions(+)

-- 
2.8.2.396.g5fe494c

[PATCH 1/2] arm: dra7: Add hwmod entry for i2c6

[Ravikumar Kattekola]

dra72x device has i2c6 controller.
Adding hwmod definition for the same.

Reference DRA72x TRM [ SPRUHP2Q ]

Signed-off-by: Ravikumar Kattekola <rk@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index d0e7e525..b84c0f7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1127,6 +1127,20 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
 	.dev_attr	= &i2c_dev_attr,
 };
 
+/* i2c6 */
+static struct omap_hwmod dra7xx_i2c6_hwmod = {
+	.name		= "i2c6",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
 /*
  * 'mailbox' class
  *
@@ -3186,6 +3200,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_per2 -> i2c6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__i2c6 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_i2c6_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_cfg -> mailbox1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = {
 	.master		= &dra7xx_l4_cfg_hwmod,
@@ -3857,6 +3879,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per1__i2c3,
 	&dra7xx_l4_per1__i2c4,
 	&dra7xx_l4_per1__i2c5,
+	&dra7xx_l4_per2__i2c6,
 	&dra7xx_l4_cfg__mailbox1,
 	&dra7xx_l4_per3__mailbox2,
 	&dra7xx_l4_per3__mailbox3,
-- 
2.8.2.396.g5fe494c

[PATCH 1/2] arm: dra7: Add hwmod entry for i2c6

[Ravikumar Kattekola]

dra72x device has i2c6 controller.
Adding hwmod definition for the same.

Reference DRA72x TRM [ SPRUHP2Q ]

Signed-off-by: Ravikumar Kattekola <rk@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index d0e7e525..b84c0f7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1127,6 +1127,20 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
 	.dev_attr	= &i2c_dev_attr,
 };
 
+/* i2c6 */
+static struct omap_hwmod dra7xx_i2c6_hwmod = {
+	.name		= "i2c6",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
 /*
  * 'mailbox' class
  *
@@ -3186,6 +3200,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_per2 -> i2c6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__i2c6 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_i2c6_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_cfg -> mailbox1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = {
 	.master		= &dra7xx_l4_cfg_hwmod,
@@ -3857,6 +3879,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per1__i2c3,
 	&dra7xx_l4_per1__i2c4,
 	&dra7xx_l4_per1__i2c5,
+	&dra7xx_l4_per2__i2c6,
 	&dra7xx_l4_cfg__mailbox1,
 	&dra7xx_l4_per3__mailbox2,
 	&dra7xx_l4_per3__mailbox3,
-- 
2.8.2.396.g5fe494c

[PATCH 1/2] arm: dra7: Add hwmod entry for i2c6

[Ravikumar Kattekola]

dra72x device has i2c6 controller.
Adding hwmod definition for the same.

Reference DRA72x TRM [ SPRUHP2Q ]

Signed-off-by: Ravikumar Kattekola <rk@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index d0e7e525..b84c0f7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1127,6 +1127,20 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
 	.dev_attr	= &i2c_dev_attr,
 };
 
+/* i2c6 */
+static struct omap_hwmod dra7xx_i2c6_hwmod = {
+	.name		= "i2c6",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
 /*
  * 'mailbox' class
  *
@@ -3186,6 +3200,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_per2 -> i2c6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__i2c6 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_i2c6_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_cfg -> mailbox1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = {
 	.master		= &dra7xx_l4_cfg_hwmod,
@@ -3857,6 +3879,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per1__i2c3,
 	&dra7xx_l4_per1__i2c4,
 	&dra7xx_l4_per1__i2c5,
+	&dra7xx_l4_per2__i2c6,
 	&dra7xx_l4_cfg__mailbox1,
 	&dra7xx_l4_per3__mailbox2,
 	&dra7xx_l4_per3__mailbox3,
-- 
2.8.2.396.g5fe494c

Re: [PATCH 1/2] arm: dra7: Add hwmod entry for i2c6

[Nishanth Menon]

On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
> dra72x device has i2c6 controller.
> Adding hwmod definition for the same.
> 
> Reference DRA72x TRM [ SPRUHP2Q ]
> 
> Signed-off-by: Ravikumar Kattekola <rk@ti.com>
> ---
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> index d0e7e525..b84c0f7 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> @@ -1127,6 +1127,20 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
>  	.dev_attr	= &i2c_dev_attr,
>  };
>  
> +/* i2c6 */
> +static struct omap_hwmod dra7xx_i2c6_hwmod = {
> +	.name		= "i2c6",
> +	.class		= &dra7xx_i2c_hwmod_class,
> +	.clkdm_name	= "l4per2_clkdm",
> +	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
> +	.main_clk	= "func_96m_fclk",
> +	.prcm = {
> +		.omap4 = {
> +		},
> +	},
> +	.dev_attr	= &i2c_dev_attr,
> +};
> +
>  /*
>   * 'mailbox' class
>   *
> @@ -3186,6 +3200,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
>  	.user		= OCP_USER_MPU | OCP_USER_SDMA,
>  };
>  
> +/* l4_per2 -> i2c6 */
> +static struct omap_hwmod_ocp_if dra7xx_l4_per2__i2c6 = {
> +	.master		= &dra7xx_l4_per2_hwmod,
> +	.slave		= &dra7xx_i2c6_hwmod,
> +	.clk		= "l3_iclk_div",
> +	.user		= OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
>  /* l4_cfg -> mailbox1 */
>  static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = {
>  	.master		= &dra7xx_l4_cfg_hwmod,
> @@ -3857,6 +3879,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
>  	&dra7xx_l4_per1__i2c3,
>  	&dra7xx_l4_per1__i2c4,
>  	&dra7xx_l4_per1__i2c5,
> +	&dra7xx_l4_per2__i2c6,
>  	&dra7xx_l4_cfg__mailbox1,
>  	&dra7xx_l4_per3__mailbox2,
>  	&dra7xx_l4_per3__mailbox3,
> 

responding to the specific patches themselves:
NAK. reasoning:
a) i2c6 is a custom IP integration with completely non-standard
dependencies with cross device dependencies for pretty much a specific
usecase -> usage is pretty much limited for generic support - the
decision is NOT to support this instance in Linux kernel - internal
discussion forwarded to developer.
b) the patches themselves are wrong -> it applies to DRA72x not
generic DRA7x platform
c) patches themselves are in the wrong format (wrong subject line etc).
d) patches don't handle the SoC internal device dependencies either ->
in short will not function in a generic solution for all variations of
platforms.

-- 
Regards,
Nishanth Menon

Re: [PATCH 1/2] arm: dra7: Add hwmod entry for i2c6

[Nishanth Menon]

On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
> dra72x device has i2c6 controller.
> Adding hwmod definition for the same.
> 
> Reference DRA72x TRM [ SPRUHP2Q ]
> 
> Signed-off-by: Ravikumar Kattekola <rk@ti.com>
> ---
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> index d0e7e525..b84c0f7 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> @@ -1127,6 +1127,20 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
>  	.dev_attr	= &i2c_dev_attr,
>  };
>  
> +/* i2c6 */
> +static struct omap_hwmod dra7xx_i2c6_hwmod = {
> +	.name		= "i2c6",
> +	.class		= &dra7xx_i2c_hwmod_class,
> +	.clkdm_name	= "l4per2_clkdm",
> +	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
> +	.main_clk	= "func_96m_fclk",
> +	.prcm = {
> +		.omap4 = {
> +		},
> +	},
> +	.dev_attr	= &i2c_dev_attr,
> +};
> +
>  /*
>   * 'mailbox' class
>   *
> @@ -3186,6 +3200,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
>  	.user		= OCP_USER_MPU | OCP_USER_SDMA,
>  };
>  
> +/* l4_per2 -> i2c6 */
> +static struct omap_hwmod_ocp_if dra7xx_l4_per2__i2c6 = {
> +	.master		= &dra7xx_l4_per2_hwmod,
> +	.slave		= &dra7xx_i2c6_hwmod,
> +	.clk		= "l3_iclk_div",
> +	.user		= OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
>  /* l4_cfg -> mailbox1 */
>  static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = {
>  	.master		= &dra7xx_l4_cfg_hwmod,
> @@ -3857,6 +3879,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
>  	&dra7xx_l4_per1__i2c3,
>  	&dra7xx_l4_per1__i2c4,
>  	&dra7xx_l4_per1__i2c5,
> +	&dra7xx_l4_per2__i2c6,
>  	&dra7xx_l4_cfg__mailbox1,
>  	&dra7xx_l4_per3__mailbox2,
>  	&dra7xx_l4_per3__mailbox3,
> 

responding to the specific patches themselves:
NAK. reasoning:
a) i2c6 is a custom IP integration with completely non-standard
dependencies with cross device dependencies for pretty much a specific
usecase -> usage is pretty much limited for generic support - the
decision is NOT to support this instance in Linux kernel - internal
discussion forwarded to developer.
b) the patches themselves are wrong -> it applies to DRA72x not
generic DRA7x platform
c) patches themselves are in the wrong format (wrong subject line etc).
d) patches don't handle the SoC internal device dependencies either ->
in short will not function in a generic solution for all variations of
platforms.

-- 
Regards,
Nishanth Menon

[PATCH 1/2] arm: dra7: Add hwmod entry for i2c6

[Nishanth Menon]

On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
> dra72x device has i2c6 controller.
> Adding hwmod definition for the same.
> 
> Reference DRA72x TRM [ SPRUHP2Q ]
> 
> Signed-off-by: Ravikumar Kattekola <rk@ti.com>
> ---
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> index d0e7e525..b84c0f7 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> @@ -1127,6 +1127,20 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
>  	.dev_attr	= &i2c_dev_attr,
>  };
>  
> +/* i2c6 */
> +static struct omap_hwmod dra7xx_i2c6_hwmod = {
> +	.name		= "i2c6",
> +	.class		= &dra7xx_i2c_hwmod_class,
> +	.clkdm_name	= "l4per2_clkdm",
> +	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
> +	.main_clk	= "func_96m_fclk",
> +	.prcm = {
> +		.omap4 = {
> +		},
> +	},
> +	.dev_attr	= &i2c_dev_attr,
> +};
> +
>  /*
>   * 'mailbox' class
>   *
> @@ -3186,6 +3200,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
>  	.user		= OCP_USER_MPU | OCP_USER_SDMA,
>  };
>  
> +/* l4_per2 -> i2c6 */
> +static struct omap_hwmod_ocp_if dra7xx_l4_per2__i2c6 = {
> +	.master		= &dra7xx_l4_per2_hwmod,
> +	.slave		= &dra7xx_i2c6_hwmod,
> +	.clk		= "l3_iclk_div",
> +	.user		= OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
>  /* l4_cfg -> mailbox1 */
>  static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = {
>  	.master		= &dra7xx_l4_cfg_hwmod,
> @@ -3857,6 +3879,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
>  	&dra7xx_l4_per1__i2c3,
>  	&dra7xx_l4_per1__i2c4,
>  	&dra7xx_l4_per1__i2c5,
> +	&dra7xx_l4_per2__i2c6,
>  	&dra7xx_l4_cfg__mailbox1,
>  	&dra7xx_l4_per3__mailbox2,
>  	&dra7xx_l4_per3__mailbox3,
> 

responding to the specific patches themselves:
NAK. reasoning:
a) i2c6 is a custom IP integration with completely non-standard
dependencies with cross device dependencies for pretty much a specific
usecase -> usage is pretty much limited for generic support - the
decision is NOT to support this instance in Linux kernel - internal
discussion forwarded to developer.
b) the patches themselves are wrong -> it applies to DRA72x not
generic DRA7x platform
c) patches themselves are in the wrong format (wrong subject line etc).
d) patches don't handle the SoC internal device dependencies either ->
in short will not function in a generic solution for all variations of
platforms.

-- 
Regards,
Nishanth Menon

Re: [PATCH 1/2] arm: dra7: Add hwmod entry for i2c6

[Lokesh Vutla]

On Wednesday 25 May 2016 06:23 PM, Ravikumar Kattekola wrote:
> dra72x device has i2c6 controller.
> Adding hwmod definition for the same.
> 
> Reference DRA72x TRM [ SPRUHP2Q ]
> 
> Signed-off-by: Ravikumar Kattekola <rk-l0cyMroinI0@public.gmane.org>
> ---
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> index d0e7e525..b84c0f7 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> @@ -1127,6 +1127,20 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
>  	.dev_attr	= &i2c_dev_attr,
>  };
>  
> +/* i2c6 */
> +static struct omap_hwmod dra7xx_i2c6_hwmod = {
> +	.name		= "i2c6",
> +	.class		= &dra7xx_i2c_hwmod_class,
> +	.clkdm_name	= "l4per2_clkdm",
> +	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
> +	.main_clk	= "func_96m_fclk",
> +	.prcm = {
> +		.omap4 = {
> +		},
> +	},
> +	.dev_attr	= &i2c_dev_attr,
> +};
> +
>  /*
>   * 'mailbox' class
>   *
> @@ -3186,6 +3200,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
>  	.user		= OCP_USER_MPU | OCP_USER_SDMA,
>  };
>  
> +/* l4_per2 -> i2c6 */
> +static struct omap_hwmod_ocp_if dra7xx_l4_per2__i2c6 = {
> +	.master		= &dra7xx_l4_per2_hwmod,
> +	.slave		= &dra7xx_i2c6_hwmod,
> +	.clk		= "l3_iclk_div",
> +	.user		= OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
>  /* l4_cfg -> mailbox1 */
>  static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = {
>  	.master		= &dra7xx_l4_cfg_hwmod,
> @@ -3857,6 +3879,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
>  	&dra7xx_l4_per1__i2c3,
>  	&dra7xx_l4_per1__i2c4,
>  	&dra7xx_l4_per1__i2c5,
> +	&dra7xx_l4_per2__i2c6,

If it is available only on dra72x, register the hwmod under
dra72x_hwmod_ocp_ifs. Also in $subject use dra72x to make things clear.

Thanks and regards,
Lokesh

>  	&dra7xx_l4_cfg__mailbox1,
>  	&dra7xx_l4_per3__mailbox2,
>  	&dra7xx_l4_per3__mailbox3,
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] arm: dra7: Add hwmod entry for i2c6

[Lokesh Vutla]

On Wednesday 25 May 2016 06:23 PM, Ravikumar Kattekola wrote:
> dra72x device has i2c6 controller.
> Adding hwmod definition for the same.
> 
> Reference DRA72x TRM [ SPRUHP2Q ]
> 
> Signed-off-by: Ravikumar Kattekola <rk@ti.com>
> ---
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> index d0e7e525..b84c0f7 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> @@ -1127,6 +1127,20 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
>  	.dev_attr	= &i2c_dev_attr,
>  };
>  
> +/* i2c6 */
> +static struct omap_hwmod dra7xx_i2c6_hwmod = {
> +	.name		= "i2c6",
> +	.class		= &dra7xx_i2c_hwmod_class,
> +	.clkdm_name	= "l4per2_clkdm",
> +	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
> +	.main_clk	= "func_96m_fclk",
> +	.prcm = {
> +		.omap4 = {
> +		},
> +	},
> +	.dev_attr	= &i2c_dev_attr,
> +};
> +
>  /*
>   * 'mailbox' class
>   *
> @@ -3186,6 +3200,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
>  	.user		= OCP_USER_MPU | OCP_USER_SDMA,
>  };
>  
> +/* l4_per2 -> i2c6 */
> +static struct omap_hwmod_ocp_if dra7xx_l4_per2__i2c6 = {
> +	.master		= &dra7xx_l4_per2_hwmod,
> +	.slave		= &dra7xx_i2c6_hwmod,
> +	.clk		= "l3_iclk_div",
> +	.user		= OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
>  /* l4_cfg -> mailbox1 */
>  static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = {
>  	.master		= &dra7xx_l4_cfg_hwmod,
> @@ -3857,6 +3879,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
>  	&dra7xx_l4_per1__i2c3,
>  	&dra7xx_l4_per1__i2c4,
>  	&dra7xx_l4_per1__i2c5,
> +	&dra7xx_l4_per2__i2c6,

If it is available only on dra72x, register the hwmod under
dra72x_hwmod_ocp_ifs. Also in $subject use dra72x to make things clear.

Thanks and regards,
Lokesh

>  	&dra7xx_l4_cfg__mailbox1,
>  	&dra7xx_l4_per3__mailbox2,
>  	&dra7xx_l4_per3__mailbox3,
> 

[PATCH 1/2] arm: dra7: Add hwmod entry for i2c6

[Lokesh Vutla]

On Wednesday 25 May 2016 06:23 PM, Ravikumar Kattekola wrote:
> dra72x device has i2c6 controller.
> Adding hwmod definition for the same.
> 
> Reference DRA72x TRM [ SPRUHP2Q ]
> 
> Signed-off-by: Ravikumar Kattekola <rk@ti.com>
> ---
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> index d0e7e525..b84c0f7 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> @@ -1127,6 +1127,20 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
>  	.dev_attr	= &i2c_dev_attr,
>  };
>  
> +/* i2c6 */
> +static struct omap_hwmod dra7xx_i2c6_hwmod = {
> +	.name		= "i2c6",
> +	.class		= &dra7xx_i2c_hwmod_class,
> +	.clkdm_name	= "l4per2_clkdm",
> +	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
> +	.main_clk	= "func_96m_fclk",
> +	.prcm = {
> +		.omap4 = {
> +		},
> +	},
> +	.dev_attr	= &i2c_dev_attr,
> +};
> +
>  /*
>   * 'mailbox' class
>   *
> @@ -3186,6 +3200,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
>  	.user		= OCP_USER_MPU | OCP_USER_SDMA,
>  };
>  
> +/* l4_per2 -> i2c6 */
> +static struct omap_hwmod_ocp_if dra7xx_l4_per2__i2c6 = {
> +	.master		= &dra7xx_l4_per2_hwmod,
> +	.slave		= &dra7xx_i2c6_hwmod,
> +	.clk		= "l3_iclk_div",
> +	.user		= OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
>  /* l4_cfg -> mailbox1 */
>  static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = {
>  	.master		= &dra7xx_l4_cfg_hwmod,
> @@ -3857,6 +3879,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
>  	&dra7xx_l4_per1__i2c3,
>  	&dra7xx_l4_per1__i2c4,
>  	&dra7xx_l4_per1__i2c5,
> +	&dra7xx_l4_per2__i2c6,

If it is available only on dra72x, register the hwmod under
dra72x_hwmod_ocp_ifs. Also in $subject use dra72x to make things clear.

Thanks and regards,
Lokesh

>  	&dra7xx_l4_cfg__mailbox1,
>  	&dra7xx_l4_per3__mailbox2,
>  	&dra7xx_l4_per3__mailbox3,
> 

[PATCH 2/2] dts: dra7: Add device tree node for i2c6

[Ravikumar Kattekola]

DRA72x devices have an extra i2c controller instance - i2c6
Adding device description for the same.

Reference : DRA72x_SR1.0 TRM [ SPRUHP2Q ]

Signed-off-by: Ravikumar Kattekola <rk@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 3a8f397..84729a1 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -27,6 +27,7 @@
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
+		i2c5 = &i2c6;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -929,6 +930,16 @@
 			status = "disabled";
 		};
 
+		i2c6: i2c@48458000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48458000 0x100>;
+			interrupts = <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c6";
+			status = "disabled";
+		};
+
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x4809c000 0x400>;
-- 
2.8.2.396.g5fe494c

[PATCH 2/2] dts: dra7: Add device tree node for i2c6

[Ravikumar Kattekola]

DRA72x devices have an extra i2c controller instance - i2c6
Adding device description for the same.

Reference : DRA72x_SR1.0 TRM [ SPRUHP2Q ]

Signed-off-by: Ravikumar Kattekola <rk@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 3a8f397..84729a1 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -27,6 +27,7 @@
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
+		i2c5 = &i2c6;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -929,6 +930,16 @@
 			status = "disabled";
 		};
 
+		i2c6: i2c@48458000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48458000 0x100>;
+			interrupts = <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c6";
+			status = "disabled";
+		};
+
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x4809c000 0x400>;
-- 
2.8.2.396.g5fe494c

[PATCH 2/2] dts: dra7: Add device tree node for i2c6

[Ravikumar Kattekola]

DRA72x devices have an extra i2c controller instance - i2c6
Adding device description for the same.

Reference : DRA72x_SR1.0 TRM [ SPRUHP2Q ]

Signed-off-by: Ravikumar Kattekola <rk@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 3a8f397..84729a1 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -27,6 +27,7 @@
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
+		i2c5 = &i2c6;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -929,6 +930,16 @@
 			status = "disabled";
 		};
 
+		i2c6: i2c at 48458000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48458000 0x100>;
+			interrupts = <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c6";
+			status = "disabled";
+		};
+
 		mmc1: mmc at 4809c000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x4809c000 0x400>;
-- 
2.8.2.396.g5fe494c

Re: [PATCH 2/2] dts: dra7: Add device tree node for i2c6

[Nishanth Menon]

On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
> DRA72x devices have an extra i2c controller instance - i2c6
> Adding device description for the same.
> 
> Reference : DRA72x_SR1.0 TRM [ SPRUHP2Q ]
> 
> Signed-off-by: Ravikumar Kattekola <rk@ti.com>
> ---
>  arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 3a8f397..84729a1 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -27,6 +27,7 @@
>  		i2c2 = &i2c3;
>  		i2c3 = &i2c4;
>  		i2c4 = &i2c5;
> +		i2c5 = &i2c6;
>  		serial0 = &uart1;
>  		serial1 = &uart2;
>  		serial2 = &uart3;
> @@ -929,6 +930,16 @@
>  			status = "disabled";
>  		};
>  
> +		i2c6: i2c@48458000 {
> +			compatible = "ti,omap4-i2c";
> +			reg = <0x48458000 0x100>;
> +			interrupts = <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			ti,hwmods = "i2c6";
> +			status = "disabled";
> +		};
> +
>  		mmc1: mmc@4809c000 {
>  			compatible = "ti,omap4-hsmmc";
>  			reg = <0x4809c000 0x400>;
> 
NAK again for the same reasoning.

-- 
Regards,
Nishanth Menon

Re: [PATCH 2/2] dts: dra7: Add device tree node for i2c6

[Nishanth Menon]

On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
> DRA72x devices have an extra i2c controller instance - i2c6
> Adding device description for the same.
> 
> Reference : DRA72x_SR1.0 TRM [ SPRUHP2Q ]
> 
> Signed-off-by: Ravikumar Kattekola <rk@ti.com>
> ---
>  arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 3a8f397..84729a1 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -27,6 +27,7 @@
>  		i2c2 = &i2c3;
>  		i2c3 = &i2c4;
>  		i2c4 = &i2c5;
> +		i2c5 = &i2c6;
>  		serial0 = &uart1;
>  		serial1 = &uart2;
>  		serial2 = &uart3;
> @@ -929,6 +930,16 @@
>  			status = "disabled";
>  		};
>  
> +		i2c6: i2c@48458000 {
> +			compatible = "ti,omap4-i2c";
> +			reg = <0x48458000 0x100>;
> +			interrupts = <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			ti,hwmods = "i2c6";
> +			status = "disabled";
> +		};
> +
>  		mmc1: mmc@4809c000 {
>  			compatible = "ti,omap4-hsmmc";
>  			reg = <0x4809c000 0x400>;
> 
NAK again for the same reasoning.

-- 
Regards,
Nishanth Menon

[PATCH 2/2] dts: dra7: Add device tree node for i2c6

[Nishanth Menon]

On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
> DRA72x devices have an extra i2c controller instance - i2c6
> Adding device description for the same.
> 
> Reference : DRA72x_SR1.0 TRM [ SPRUHP2Q ]
> 
> Signed-off-by: Ravikumar Kattekola <rk@ti.com>
> ---
>  arch/arm/boot/dts/dra7.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 3a8f397..84729a1 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -27,6 +27,7 @@
>  		i2c2 = &i2c3;
>  		i2c3 = &i2c4;
>  		i2c4 = &i2c5;
> +		i2c5 = &i2c6;
>  		serial0 = &uart1;
>  		serial1 = &uart2;
>  		serial2 = &uart3;
> @@ -929,6 +930,16 @@
>  			status = "disabled";
>  		};
>  
> +		i2c6: i2c at 48458000 {
> +			compatible = "ti,omap4-i2c";
> +			reg = <0x48458000 0x100>;
> +			interrupts = <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			ti,hwmods = "i2c6";
> +			status = "disabled";
> +		};
> +
>  		mmc1: mmc at 4809c000 {
>  			compatible = "ti,omap4-hsmmc";
>  			reg = <0x4809c000 0x400>;
> 
NAK again for the same reasoning.

-- 
Regards,
Nishanth Menon

Re: [PATCH 0/2] arm: dra7: Add i2c6 instance hwmod and dt entries

[Nishanth Menon]

On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
> DRA72x devices have a sixth i2c ocntroller instance.
> Following patches add the required hwmod structure and
> device tree nodes.
> 
> Reference doc: DRA72x TRM [ SPRUHP2Q ]
> 
> Tested on :
> DRA72x Rev B EVM
> 
> Ravikumar Kattekola (2):
>   arm: dra7: Add hwmod entry for i2c6
>   dts: dra7: Add device tree node for i2c6
> 
>  arch/arm/boot/dts/dra7.dtsi               | 11 +++++++++++
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>  2 files changed, 34 insertions(+)
> 
NAK. reasoning:
a) i2c6 is a custom IP integration with completely non-standard
dependencies with cross device dependencies for pretty much a specific
usecase -> usage is pretty much limited for generic support - the
decision is NOT to support this instance in Linux kernel - internal
discussion forwarded to developer.
b) the patches themselves are wrong -> it applies to DRA72x not
generic DRA7x platform
c) patches themselves are in the wrong format (wrong subject line etc).
d) patches don't handle the SoC internal device dependencies either ->
in short will not function in a generic solution for all variations of
platforms.

-- 
Regards,
Nishanth Menon

Re: [PATCH 0/2] arm: dra7: Add i2c6 instance hwmod and dt entries

[Nishanth Menon]

On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
> DRA72x devices have a sixth i2c ocntroller instance.
> Following patches add the required hwmod structure and
> device tree nodes.
> 
> Reference doc: DRA72x TRM [ SPRUHP2Q ]
> 
> Tested on :
> DRA72x Rev B EVM
> 
> Ravikumar Kattekola (2):
>   arm: dra7: Add hwmod entry for i2c6
>   dts: dra7: Add device tree node for i2c6
> 
>  arch/arm/boot/dts/dra7.dtsi               | 11 +++++++++++
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>  2 files changed, 34 insertions(+)
> 
NAK. reasoning:
a) i2c6 is a custom IP integration with completely non-standard
dependencies with cross device dependencies for pretty much a specific
usecase -> usage is pretty much limited for generic support - the
decision is NOT to support this instance in Linux kernel - internal
discussion forwarded to developer.
b) the patches themselves are wrong -> it applies to DRA72x not
generic DRA7x platform
c) patches themselves are in the wrong format (wrong subject line etc).
d) patches don't handle the SoC internal device dependencies either ->
in short will not function in a generic solution for all variations of
platforms.

-- 
Regards,
Nishanth Menon

[PATCH 0/2] arm: dra7: Add i2c6 instance hwmod and dt entries

[Nishanth Menon]

On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
> DRA72x devices have a sixth i2c ocntroller instance.
> Following patches add the required hwmod structure and
> device tree nodes.
> 
> Reference doc: DRA72x TRM [ SPRUHP2Q ]
> 
> Tested on :
> DRA72x Rev B EVM
> 
> Ravikumar Kattekola (2):
>   arm: dra7: Add hwmod entry for i2c6
>   dts: dra7: Add device tree node for i2c6
> 
>  arch/arm/boot/dts/dra7.dtsi               | 11 +++++++++++
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>  2 files changed, 34 insertions(+)
> 
NAK. reasoning:
a) i2c6 is a custom IP integration with completely non-standard
dependencies with cross device dependencies for pretty much a specific
usecase -> usage is pretty much limited for generic support - the
decision is NOT to support this instance in Linux kernel - internal
discussion forwarded to developer.
b) the patches themselves are wrong -> it applies to DRA72x not
generic DRA7x platform
c) patches themselves are in the wrong format (wrong subject line etc).
d) patches don't handle the SoC internal device dependencies either ->
in short will not function in a generic solution for all variations of
platforms.

-- 
Regards,
Nishanth Menon

Re: [PATCH 0/2] arm: dra7: Add i2c6 instance hwmod and dt entries

[Tero Kristo]

On 25/05/16 19:09, Nishanth Menon wrote:
> On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
>> DRA72x devices have a sixth i2c ocntroller instance.
>> Following patches add the required hwmod structure and
>> device tree nodes.
>>
>> Reference doc: DRA72x TRM [ SPRUHP2Q ]
>>
>> Tested on :
>> DRA72x Rev B EVM
>>
>> Ravikumar Kattekola (2):
>>    arm: dra7: Add hwmod entry for i2c6
>>    dts: dra7: Add device tree node for i2c6
>>
>>   arch/arm/boot/dts/dra7.dtsi               | 11 +++++++++++
>>   arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>>   2 files changed, 34 insertions(+)
>>
> NAK. reasoning:
> a) i2c6 is a custom IP integration with completely non-standard
> dependencies with cross device dependencies for pretty much a specific
> usecase -> usage is pretty much limited for generic support - the
> decision is NOT to support this instance in Linux kernel - internal
> discussion forwarded to developer.
> b) the patches themselves are wrong -> it applies to DRA72x not
> generic DRA7x platform
> c) patches themselves are in the wrong format (wrong subject line etc).
> d) patches don't handle the SoC internal device dependencies either ->
> in short will not function in a generic solution for all variations of
> platforms.
>

Yes please drop this, attempting to support it in upstream is just going 
to cause unnecessary pain.

-Tero

Re: [PATCH 0/2] arm: dra7: Add i2c6 instance hwmod and dt entries

[Tero Kristo]

On 25/05/16 19:09, Nishanth Menon wrote:
> On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
>> DRA72x devices have a sixth i2c ocntroller instance.
>> Following patches add the required hwmod structure and
>> device tree nodes.
>>
>> Reference doc: DRA72x TRM [ SPRUHP2Q ]
>>
>> Tested on :
>> DRA72x Rev B EVM
>>
>> Ravikumar Kattekola (2):
>>    arm: dra7: Add hwmod entry for i2c6
>>    dts: dra7: Add device tree node for i2c6
>>
>>   arch/arm/boot/dts/dra7.dtsi               | 11 +++++++++++
>>   arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>>   2 files changed, 34 insertions(+)
>>
> NAK. reasoning:
> a) i2c6 is a custom IP integration with completely non-standard
> dependencies with cross device dependencies for pretty much a specific
> usecase -> usage is pretty much limited for generic support - the
> decision is NOT to support this instance in Linux kernel - internal
> discussion forwarded to developer.
> b) the patches themselves are wrong -> it applies to DRA72x not
> generic DRA7x platform
> c) patches themselves are in the wrong format (wrong subject line etc).
> d) patches don't handle the SoC internal device dependencies either ->
> in short will not function in a generic solution for all variations of
> platforms.
>

Yes please drop this, attempting to support it in upstream is just going 
to cause unnecessary pain.

-Tero

[PATCH 0/2] arm: dra7: Add i2c6 instance hwmod and dt entries

[Tero Kristo]

On 25/05/16 19:09, Nishanth Menon wrote:
> On 05/25/2016 07:53 AM, Ravikumar Kattekola wrote:
>> DRA72x devices have a sixth i2c ocntroller instance.
>> Following patches add the required hwmod structure and
>> device tree nodes.
>>
>> Reference doc: DRA72x TRM [ SPRUHP2Q ]
>>
>> Tested on :
>> DRA72x Rev B EVM
>>
>> Ravikumar Kattekola (2):
>>    arm: dra7: Add hwmod entry for i2c6
>>    dts: dra7: Add device tree node for i2c6
>>
>>   arch/arm/boot/dts/dra7.dtsi               | 11 +++++++++++
>>   arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
>>   2 files changed, 34 insertions(+)
>>
> NAK. reasoning:
> a) i2c6 is a custom IP integration with completely non-standard
> dependencies with cross device dependencies for pretty much a specific
> usecase -> usage is pretty much limited for generic support - the
> decision is NOT to support this instance in Linux kernel - internal
> discussion forwarded to developer.
> b) the patches themselves are wrong -> it applies to DRA72x not
> generic DRA7x platform
> c) patches themselves are in the wrong format (wrong subject line etc).
> d) patches don't handle the SoC internal device dependencies either ->
> in short will not function in a generic solution for all variations of
> platforms.
>

Yes please drop this, attempting to support it in upstream is just going 
to cause unnecessary pain.

-Tero