From: "Dixit, Ashutosh" <ashutosh.dixit@intel.com>
To: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: <igt-dev@lists.freedesktop.org>
Subject: Re: [PATCH 05/13] tests/intel/xe_oa: Use same render copy width and height across tests
Date: Fri, 21 Feb 2025 18:48:55 -0800 [thread overview]
Message-ID: <857c5iofs8.wl-ashutosh.dixit@intel.com> (raw)
In-Reply-To: <20250215010628.1639986-6-umesh.nerlige.ramappa@intel.com>
On Fri, 14 Feb 2025 17:06:20 -0800, Umesh Nerlige Ramappa wrote:
>
> Use the same width and height for render copy frame across tests.
Use the same width and height for render copy frame to make execution times
uniform across tests.
>
> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
> ---
> tests/intel/xe_oa.c | 39 +++++++++++++++++++--------------------
> 1 file changed, 19 insertions(+), 20 deletions(-)
>
> diff --git a/tests/intel/xe_oa.c b/tests/intel/xe_oa.c
> index 7e40e9257..aaf92308a 100644
> --- a/tests/intel/xe_oa.c
> +++ b/tests/intel/xe_oa.c
> @@ -303,6 +303,7 @@ static uint64_t oa_exponent_default;
> static size_t default_oa_buffer_size;
> static struct intel_mmio_data mmio_data;
> static igt_render_copyfunc_t render_copy;
> +static uint32_t rc_width, rc_height;
>
> static struct intel_xe_perf_metric_set *metric_set(const struct drm_xe_engine_class_instance *hwe)
> {
> @@ -1089,6 +1090,8 @@ init_sys_info(void)
>
> intel_xe_perf_load_perf_configs(intel_xe_perf, drm_fd);
>
> + rc_width = 1920;
> + rc_height = 1080;
If this increases the execution time for the tests, we could go with the
smaller 800x600 size?
But otherwise this is:
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
> oa_exponent_default = max_oa_exponent_for_period_lte(1000000);
>
> default_oa_buffer_size = get_default_oa_buffer_size(drm_fd);
> @@ -1608,7 +1611,7 @@ static void load_helper_run(enum load load)
>
> while (!lh.exit) {
> render_copy(lh.ibb,
> - &lh.src, 0, 0, 1920, 1080,
> + &lh.src, 0, 0, rc_width, rc_height,
> &lh.dst, 0, 0);
>
> intel_bb_sync(lh.ibb);
> @@ -1645,8 +1648,8 @@ static void load_helper_init(void)
>
> lh.ibb = intel_bb_create_with_context(drm_fd, lh.context_id, lh.vm, NULL, BATCH_SZ);
>
> - scratch_buf_init(lh.bops, &lh.dst, 1920, 1080, 0);
> - scratch_buf_init(lh.bops, &lh.src, 1920, 1080, 0);
> + scratch_buf_init(lh.bops, &lh.dst, rc_width, rc_height, 0);
> + scratch_buf_init(lh.bops, &lh.src, rc_width, rc_height, 0);
> }
>
> static void load_helper_fini(void)
> @@ -3112,8 +3115,6 @@ static void single_ctx_helper(struct drm_xe_engine_class_instance *hwe)
> uint64_t delta_ts64, delta_oa32;
> uint64_t delta_ts64_ns, delta_oa32_ns;
> uint64_t delta_delta;
> - int width = 800;
> - int height = 600;
> #define INVALID_CTX_ID 0xffffffff
> uint32_t ctx0_id = INVALID_CTX_ID;
> uint32_t ctx1_id = INVALID_CTX_ID;
> @@ -3125,8 +3126,8 @@ static void single_ctx_helper(struct drm_xe_engine_class_instance *hwe)
> bops = buf_ops_create(drm_fd);
>
> for (int i = 0; i < ARRAY_SIZE(src); i++) {
> - scratch_buf_init(bops, &src[i], width, height, 0xff0000ff);
> - scratch_buf_init(bops, &dst[i], width, height, 0x00ff00ff);
> + scratch_buf_init(bops, &src[i], rc_width, rc_height, 0xff0000ff);
> + scratch_buf_init(bops, &dst[i], rc_width, rc_height, 0x00ff00ff);
> }
>
> vm = xe_vm_create(drm_fd, 0, 0);
> @@ -3139,7 +3140,7 @@ static void single_ctx_helper(struct drm_xe_engine_class_instance *hwe)
>
> /* Submit some early, unmeasured, work to the context we want */
> render_copy(ibb0,
> - &src[0], 0, 0, width, height,
> + &src[0], 0, 0, rc_width, rc_height,
> &dst[0], 0, 0);
>
> /* Initialize the context parameter to the perf open ioctl here */
> @@ -3175,7 +3176,7 @@ static void single_ctx_helper(struct drm_xe_engine_class_instance *hwe)
>
> /* This is the work/context that is measured for counter increments */
> render_copy(ibb0,
> - &src[0], 0, 0, width, height,
> + &src[0], 0, 0, rc_width, rc_height,
> &dst[0], 0, 0);
> intel_bb_flush_render(ibb0);
>
> @@ -3200,11 +3201,11 @@ static void single_ctx_helper(struct drm_xe_engine_class_instance *hwe)
> * context1
> */
> render_copy(ibb1,
> - &src[1], 0, 0, width, height,
> + &src[1], 0, 0, rc_width, rc_height,
> &dst[1], 0, 0);
>
> render_copy(ibb1,
> - &src[2], 0, 0, width, height,
> + &src[2], 0, 0, rc_width, rc_height,
> &dst[2], 0, 0);
> intel_bb_flush_render(ibb1);
>
> @@ -3325,7 +3326,7 @@ static void single_ctx_helper(struct drm_xe_engine_class_instance *hwe)
> igt_debug("n samples written = %"PRIu64"/%"PRIu64" (%ix%i)\n",
> accumulator.deltas[2 + 21],
> accumulator.deltas[2 + 26],
> - width, height);
> + rc_width, rc_height);
> accumulator_print(&accumulator, "filtered");
>
> /* Verify that the work actually happened by comparing the src
> @@ -3334,7 +3335,7 @@ static void single_ctx_helper(struct drm_xe_engine_class_instance *hwe)
> buf_map(drm_fd, &src[0], false);
> buf_map(drm_fd, &dst[0], false);
>
> - ret = memcmp(src[0].ptr, dst[0].ptr, 4 * width * height);
> + ret = memcmp(src[0].ptr, dst[0].ptr, 4 * rc_width * rc_height);
> intel_buf_unmap(&src[0]);
> intel_buf_unmap(&dst[0]);
>
> @@ -3350,9 +3351,9 @@ static void single_ctx_helper(struct drm_xe_engine_class_instance *hwe)
> /* Check that this test passed. The test measures the number of 2x2
> * samples written to the render target using the counter A26. For
> * OAR, this counter will only have increments relevant to this specific
> - * context. The value equals the width * height of the rendered work.
> + * context. The value equals the rc_width * rc_height of the rendered work.
> */
> - igt_assert_eq(accumulator.deltas[2 + 26], width * height);
> + igt_assert_eq(accumulator.deltas[2 + 26], rc_width * rc_height);
>
> skip_check:
> /* Clean up */
> @@ -4006,8 +4007,6 @@ __test_mmio_triggered_reports(struct drm_xe_engine_class_instance *hwe)
> struct buf_ops *bops;
> struct intel_bb *ibb;
> uint32_t context, vm;
> - int height = 600;
> - int width = 800;
> uint8_t *buf;
>
> bops = buf_ops_create(drm_fd);
> @@ -4019,8 +4018,8 @@ __test_mmio_triggered_reports(struct drm_xe_engine_class_instance *hwe)
> memset(dst_buf->ptr, 0, 4096);
> intel_buf_unmap(dst_buf);
>
> - scratch_buf_init(bops, &src, width, height, 0xff0000ff);
> - scratch_buf_init(bops, &dst, width, height, 0x00ff00ff);
> + scratch_buf_init(bops, &src, rc_width, rc_height, 0xff0000ff);
> + scratch_buf_init(bops, &dst, rc_width, rc_height, 0x00ff00ff);
>
> vm = xe_vm_create(drm_fd, 0, 0);
> context = xe_exec_queue_create(drm_fd, vm, hwe, 0);
> @@ -4039,7 +4038,7 @@ __test_mmio_triggered_reports(struct drm_xe_engine_class_instance *hwe)
>
> if (render_copy)
> render_copy(ibb,
> - &src, 0, 0, width, height,
> + &src, 0, 0, rc_width, rc_height,
> &dst, 0, 0);
>
> emit_mmio_triggered_report(ibb, 0xc0ffee22);
> --
> 2.34.1
>
next prev parent reply other threads:[~2025-02-22 2:48 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-15 1:06 [PATCH 00/13] Some refactor, rewrite and fixes for OA tests Umesh Nerlige Ramappa
2025-02-15 1:06 ` [PATCH 01/13] tests/intel/xe_oa: Use static for global variables Umesh Nerlige Ramappa
2025-02-18 17:28 ` Dixit, Ashutosh
2025-02-15 1:06 ` [PATCH 02/13] tests/intel/xe_oa: Drop unused macro Umesh Nerlige Ramappa
2025-02-18 17:32 ` Dixit, Ashutosh
2025-02-15 1:06 ` [PATCH 03/13] tests/intel/xe_oa: Rename oa_exp_1_millisec to oa_exponent_default Umesh Nerlige Ramappa
2025-02-22 2:42 ` Dixit, Ashutosh
2025-02-22 3:35 ` Dixit, Ashutosh
2025-02-15 1:06 ` [PATCH 04/13] tests/intel/xe_oa: Use default exponent for some tests Umesh Nerlige Ramappa
2025-02-22 2:43 ` Dixit, Ashutosh
2025-02-22 3:37 ` Dixit, Ashutosh
2025-02-15 1:06 ` [PATCH 05/13] tests/intel/xe_oa: Use same render copy width and height across tests Umesh Nerlige Ramappa
2025-02-22 2:48 ` Dixit, Ashutosh [this message]
2025-02-15 1:06 ` [PATCH 06/13] tests/intel/xe_oa: Rewrite the polling small buf test Umesh Nerlige Ramappa
2025-02-24 21:35 ` Dixit, Ashutosh
2025-02-25 4:26 ` Dixit, Ashutosh
2025-02-25 22:51 ` Umesh Nerlige Ramappa
2025-02-27 3:45 ` Dixit, Ashutosh
2025-02-15 1:06 ` [PATCH 07/13] tests/intel/xe_oa: Simplify the buffer-fill test Umesh Nerlige Ramappa
2025-02-24 21:33 ` Dixit, Ashutosh
2025-02-15 1:06 ` [PATCH 08/13] tests/intel/xe_oa: Use default buffer size for non-zero reason Umesh Nerlige Ramappa
2025-02-22 3:10 ` Dixit, Ashutosh
2025-02-15 1:06 ` [PATCH 09/13] tests/intel/xe_oa: Test oa buffer sizes Umesh Nerlige Ramappa
2025-02-18 18:34 ` Dixit, Ashutosh
2025-02-18 18:38 ` Dixit, Ashutosh
2025-02-18 18:44 ` Umesh Nerlige Ramappa
2025-02-22 0:13 ` Dixit, Ashutosh
2025-02-22 1:12 ` Umesh Nerlige Ramappa
2025-02-22 3:14 ` Dixit, Ashutosh
2025-02-15 1:06 ` [PATCH 10/13] tests/intel/xe_oa: Rewrite enable-disable test Umesh Nerlige Ramappa
2025-02-25 0:30 ` Dixit, Ashutosh
2025-02-25 2:54 ` Dixit, Ashutosh
2025-02-25 22:25 ` Umesh Nerlige Ramappa
2025-02-15 1:06 ` [PATCH 11/13] tests/intel/xe_oa: Enable unprivileged-single-ctx-counters and fix it Umesh Nerlige Ramappa
2025-02-25 3:53 ` Dixit, Ashutosh
2025-02-15 1:06 ` [PATCH 12/13] tests/intel/xe_oa: Fix mmio_trigger_reports testing Umesh Nerlige Ramappa
2025-02-22 3:32 ` Dixit, Ashutosh
2025-02-15 1:06 ` [PATCH 13/13] tests/intel/xe_oa: Set boundaries for OA exponent test Umesh Nerlige Ramappa
2025-02-22 3:17 ` Dixit, Ashutosh
2025-02-15 2:09 ` ✓ Xe.CI.BAT: success for Some refactor, rewrite and fixes for OA tests Patchwork
2025-02-15 2:23 ` ✗ i915.CI.BAT: failure " Patchwork
2025-02-18 18:32 ` Umesh Nerlige Ramappa
2025-02-16 8:05 ` ✗ Xe.CI.Full: " Patchwork
2025-02-18 18:38 ` Umesh Nerlige Ramappa
2025-02-18 18:40 ` Dixit, Ashutosh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=857c5iofs8.wl-ashutosh.dixit@intel.com \
--to=ashutosh.dixit@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=umesh.nerlige.ramappa@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.