All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup
@ 2011-03-04 13:32 ` Rajendra Nayak
  0 siblings, 0 replies; 6+ messages in thread
From: Rajendra Nayak @ 2011-03-04 13:32 UTC (permalink / raw)
  To: linux-omap
  Cc: ben-linux, paul, khilman, santosh.shilimkar, linux-arm-kernel,
	linux-i2c, Rajendra Nayak

For the I2C module to be wakeup capable, programming I2C_WE
register (which was skipped for OMAP4430) is needed
even on OMAP4.
This fixes i2c controller timeouts which were seen recently
with the static dependency being cleared between MPU and
L4PER clockdomains.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
Patch is based on 2.6.38-rc7 kernel.

 drivers/i2c/busses/i2c-omap.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 829a2a1..58a58c7 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -378,9 +378,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			 * REVISIT: Some wkup sources might not be needed.
 			 */
 			dev->westate = OMAP_I2C_WE_ALL;
-			if (dev->rev < OMAP_I2C_REV_ON_4430)
-				omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
-								dev->westate);
+			omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
 		}
 	}
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
-- 
1.7.0.4


^ permalink raw reply related	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2011-03-04 17:17 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-04 13:32 [PATCH] i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup Rajendra Nayak
2011-03-04 13:32 ` Rajendra Nayak
2011-03-04 17:00 ` Kevin Hilman
2011-03-04 17:00   ` Kevin Hilman
     [not found]   ` <87ei6mizxr.fsf-l0cyMroinI0@public.gmane.org>
2011-03-04 17:17     ` Ben Dooks
2011-03-04 17:17       ` Ben Dooks

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.