Re: [PATCH v2 2/6] mtd: spi-nor: add erase die (chip) capability

From: Fabio Estevam <festevam@denx.de>
To: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>,
	michael@walle.cc, pratyush@kernel.org,
	linux-mtd@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, bacem.daassi@infineon.com,
	miquel.raynal@bootlin.com, richard@nod.at
Subject: Re: [PATCH v2 2/6] mtd: spi-nor: add erase die (chip) capability
Date: Fri, 03 Nov 2023 10:37:15 -0300	[thread overview]
Message-ID: <9004acceea77d2f06aaff0ca5f916cd7@denx.de> (raw)
In-Reply-To: <b5c1d4d7-1583-4469-a604-dcf5bb3f96a4@linaro.org>

On 03/11/2023 10:26, Tudor Ambarus wrote:

> Which version of mtd-utils are you using? I guess the flash-erase

mtd-utils 2.1.5

> utility is written in a bad way. Please use the following while I check
> what flash_erase is doing:
> 
> time mtd_debug erase /dev/mtd0 0 134217728

"mtd_debug erase" gives the same time as well:

root@mcde3000a:~# time mtd_debug erase /dev/mtd0 0 134217728
[ 4322.114967] spi-nor spi0.0: ***** nor->reg_proto = 0x00010101
[ 4322.120861] spi-nor spi0.0: *****
[ 4322.124210] spi-nor spi0.0: ***** op.cmd.nbytes = 0x01
[ 4322.129478] spi-nor spi0.0: ***** op.cmd.buswidth = 0x01
[ 4322.134903] spi-nor spi0.0: ***** op.cmd.opcode = 0xc4
[ 4322.140154] spi-nor spi0.0: *****
[ 4322.143491] spi-nor spi0.0: ***** op.addr.nbytes = 0x04
[ 4322.148831] spi-nor spi0.0: ***** op.addr.buswidth = 0x01
[ 4322.154341] spi-nor spi0.0: ***** op.addr.buswidth = 0x0
[ 4322.159761] spi-nor spi0.0: *****
[ 4322.163098] spi-nor spi0.0: ***** op.dummy.nbytes = 0x00
[ 4322.168524] spi-nor spi0.0: ***** op.dummy.buswidth = 0x00
[ 4322.174118] spi-nor spi0.0: *****
[ 4322.177439] spi-nor spi0.0: ***** op.data.buswidth = 0x00
[ 4322.182948] spi-nor spi0.0: ***** op.data.nbytes = 0
[ 4439.966060] spi-nor spi0.0: ***** nor->reg_proto = 0x00010101
[ 4439.971920] spi-nor spi0.0: *****
[ 4439.975252] spi-nor spi0.0: ***** op.cmd.nbytes = 0x01
[ 4439.980511] spi-nor spi0.0: ***** op.cmd.buswidth = 0x01
[ 4439.985928] spi-nor spi0.0: ***** op.cmd.opcode = 0xc4
[ 4439.991174] spi-nor spi0.0: *****
[ 4439.994504] spi-nor spi0.0: ***** op.addr.nbytes = 0x04
[ 4439.999834] spi-nor spi0.0: ***** op.addr.buswidth = 0x01
[ 4440.005335] spi-nor spi0.0: ***** op.addr.buswidth = 0x4000000
[ 4440.011272] spi-nor spi0.0: *****
[ 4440.014604] spi-nor spi0.0: ***** op.dummy.nbytes = 0x00
[ 4440.020018] spi-nor spi0.0: ***** op.dummy.buswidth = 0x00
[ 4440.025606] spi-nor spi0.0: *****
[ 4440.028937] spi-nor spi0.0: ***** op.data.buswidth = 0x00
[ 4440.034438] spi-nor spi0.0: ***** op.data.nbytes = 0
Erased 134217728 bytes from address 0x00000000 in flash

real	3m57.384s
user	0m0.005s
sys	3m35.211s

Thanks


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/