All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: Chester Lin <clin@suse.com>
Cc: "Andreas Färber" <afaerber@suse.de>,
	"Rob Herring" <robh@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Jan Petrous" <jan.petrous@nxp.com>,
	netdev@vger.kernel.org, s32@nxp.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Matthias Brugger" <mbrugger@suse.com>
Subject: Re: [PATCH 2/5] dt-bindings: net: add schema for NXP S32CC dwmac glue driver
Date: Fri, 4 Nov 2022 14:30:11 +0100	[thread overview]
Message-ID: <Y2UT4yIqk0pV6FHA@lunn.ch> (raw)
In-Reply-To: <Y2T5/w8CvZH5ZlE2@linux-8mug>

> Here I just focus on GMAC since there are other LAN interfaces that S32 family
> uses [e.g. PFE]. According to the public GMACSUBSYS ref manual rev2[1] provided
> on NXP website, theoretically GMAC can run SGMII in 1000Mbps and 2500Mbps so I
> assume that supporting 1000BASE-X could be achievable. I'm not sure if any S32
> board variant might have SFP ports but RJ-45 [1000BASE-T] should be the major
> type used on S32G-EVB and S32G-RDB2.

SGMII at 2500Mbps does not exist. Lots of people get this wrong. It
will be 2500Base-X.

Does the clock need to change in order to support 2500Base-X? If i
understand you correctly, Linux does not control the clocks, and so
cannot change the clocks? So that probably means you cannot actually
support 2500Base-X? Once you have Linux actually controlling the
hardware, you can then make use of an SFP or a copper PHY which
supports 2.5G. The PHY will swap its host side between SGMII and
2500Base-X depending on what the line side negotiates, 1000Base-T or
2500Base-T. The MAC driver then needs to change its configuration to
suite.

	Andrew

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Andrew Lunn <andrew@lunn.ch>
To: Chester Lin <clin@suse.com>
Cc: "Andreas Färber" <afaerber@suse.de>,
	"Rob Herring" <robh@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Jan Petrous" <jan.petrous@nxp.com>,
	netdev@vger.kernel.org, s32@nxp.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Matthias Brugger" <mbrugger@suse.com>
Subject: Re: [PATCH 2/5] dt-bindings: net: add schema for NXP S32CC dwmac glue driver
Date: Fri, 4 Nov 2022 14:30:11 +0100	[thread overview]
Message-ID: <Y2UT4yIqk0pV6FHA@lunn.ch> (raw)
In-Reply-To: <Y2T5/w8CvZH5ZlE2@linux-8mug>

> Here I just focus on GMAC since there are other LAN interfaces that S32 family
> uses [e.g. PFE]. According to the public GMACSUBSYS ref manual rev2[1] provided
> on NXP website, theoretically GMAC can run SGMII in 1000Mbps and 2500Mbps so I
> assume that supporting 1000BASE-X could be achievable. I'm not sure if any S32
> board variant might have SFP ports but RJ-45 [1000BASE-T] should be the major
> type used on S32G-EVB and S32G-RDB2.

SGMII at 2500Mbps does not exist. Lots of people get this wrong. It
will be 2500Base-X.

Does the clock need to change in order to support 2500Base-X? If i
understand you correctly, Linux does not control the clocks, and so
cannot change the clocks? So that probably means you cannot actually
support 2500Base-X? Once you have Linux actually controlling the
hardware, you can then make use of an SFP or a copper PHY which
supports 2.5G. The PHY will swap its host side between SGMII and
2500Base-X depending on what the line side negotiates, 1000Base-T or
2500Base-T. The MAC driver then needs to change its configuration to
suite.

	Andrew

  reply	other threads:[~2022-11-04 13:32 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-31 10:10 [PATCH 0/5] Add GMAC support for S32 SoC family Chester Lin
2022-10-31 10:10 ` Chester Lin
2022-10-31 10:10 ` [PATCH 1/5] dt-bindings: net: snps, dwmac: add NXP S32CC support Chester Lin
2022-10-31 10:10   ` Chester Lin
2022-10-31 10:10 ` [PATCH 2/5] dt-bindings: net: add schema for NXP S32CC dwmac glue driver Chester Lin
2022-10-31 10:10   ` Chester Lin
2022-11-02 15:55   ` Rob Herring
2022-11-02 15:55     ` Rob Herring
2022-11-02 17:13     ` Andreas Färber
2022-11-02 17:13       ` Andreas Färber
2022-11-02 21:44       ` Rob Herring
2022-11-02 21:44         ` Rob Herring
2022-11-04 10:11         ` Chester Lin
2022-11-04 10:11           ` Chester Lin
2022-11-03 22:05       ` Andrew Lunn
2022-11-03 22:05         ` Andrew Lunn
2022-11-04 11:39         ` Chester Lin
2022-11-04 11:39           ` Chester Lin
2022-11-04 13:30           ` Andrew Lunn [this message]
2022-11-04 13:30             ` Andrew Lunn
2022-11-09  8:09             ` Chester Lin
2022-11-09  8:09               ` Chester Lin
2022-11-09 22:55           ` [EXT] " Jan Petrous
2022-11-09 22:55             ` Jan Petrous
2022-11-09 23:00             ` Andrew Lunn
2022-11-09 23:00               ` Andrew Lunn
2022-11-10  8:51               ` Jan Petrous
2022-11-10  8:51                 ` Jan Petrous
2022-11-10 13:04                 ` Andrew Lunn
2022-11-10 13:04                   ` Andrew Lunn
2022-11-09 22:55       ` Jan Petrous
2022-11-09 22:55         ` Jan Petrous
2022-10-31 10:10 ` [PATCH 3/5] net: stmmac: Add CSR clock 500Mhz/800Mhz support Chester Lin
2022-10-31 10:10   ` Chester Lin
2022-10-31 10:10 ` [PATCH 4/5] net: stmmac: Add AXI4 ACE control support Chester Lin
2022-10-31 10:10   ` Chester Lin
2022-10-31 10:10 ` [PATCH 5/5] net: stmmac: Add NXP S32 SoC family support Chester Lin
2022-10-31 10:10   ` Chester Lin
2022-10-31 13:27   ` Andrew Lunn
2022-10-31 13:27     ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y2UT4yIqk0pV6FHA@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=afaerber@suse.de \
    --cc=clin@suse.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=jan.petrous@nxp.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mbrugger@suse.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=s32@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.