[PATCH 1/2] flexcop: unneeded ATOMIC

[PATCH 1/2] flexcop: unneeded ATOMIC

[Oliver Neukum]

No need for GFP_ATOMIC during probe()

Signed-off-by: Oliver Neukum <oneukum@suse.com>
---
 drivers/media/usb/b2c2/flexcop-usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
index 7835bb0f32fc..98d9912a4efb 100644
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -446,7 +446,7 @@ static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
 	/* creating iso urbs */
 	for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
 		fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,
-			GFP_ATOMIC);
+			GFP_KERNEL);
 		if (fc_usb->iso_urb[i] == NULL) {
 			ret = -ENOMEM;
 			goto urb_error;
@@ -479,7 +479,7 @@ static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
 			frame_offset += frame_size;
 		}
 
-		if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
+		if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_KERNEL))) {
 			err("submitting urb %d failed with %d.", i, ret);
 			goto urb_error;
 		}
-- 
2.35.3

[PATCH 2/2] flexcop: allow for modern speeds

[Oliver Neukum]

High speed is no longer the ultimate in speed.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
---
 drivers/media/usb/b2c2/flexcop-usb.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
index 98d9912a4efb..52e9964c2e59 100644
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -525,6 +525,12 @@ static int flexcop_usb_init(struct flexcop_usb *fc_usb)
 	case USB_SPEED_HIGH:
 		info("running at HIGH speed.");
 		break;
+	case USB_SPEED_SUPER:
+		info("running at SUPER speed.");
+		break;
+	case USB_SPEED_SUPER_PLUS:
+		info("running at SUPER+ speed.");
+		break;
 	case USB_SPEED_UNKNOWN:
 	default:
 		err("cannot handle USB speed because it is unknown.");
-- 
2.35.3

Re: [PATCH 2/2] flexcop: allow for modern speeds

[Johan Hovold]

On Tue, May 17, 2022 at 03:11:09PM +0200, Oliver Neukum wrote:
> High speed is no longer the ultimate in speed.
> 
> Signed-off-by: Oliver Neukum <oneukum@suse.com>
> ---
>  drivers/media/usb/b2c2/flexcop-usb.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
> index 98d9912a4efb..52e9964c2e59 100644
> --- a/drivers/media/usb/b2c2/flexcop-usb.c
> +++ b/drivers/media/usb/b2c2/flexcop-usb.c
> @@ -525,6 +525,12 @@ static int flexcop_usb_init(struct flexcop_usb *fc_usb)
>  	case USB_SPEED_HIGH:
>  		info("running at HIGH speed.");
>  		break;
> +	case USB_SPEED_SUPER:
> +		info("running at SUPER speed.");
> +		break;
> +	case USB_SPEED_SUPER_PLUS:
> +		info("running at SUPER+ speed.");
> +		break;

Not sure this change is warranted, though. These devices aren't going to
start supporting SuperSpeed.

>  	case USB_SPEED_UNKNOWN:
>  	default:
>  		err("cannot handle USB speed because it is unknown.");

Johan

Re: [PATCH 1/2] flexcop: unneeded ATOMIC

[Johan Hovold]

On Tue, May 17, 2022 at 03:11:08PM +0200, Oliver Neukum wrote:
> No need for GFP_ATOMIC during probe()

Please add a "media: " prefix and use a verb (e.g. "replace") in
Subject.

> Signed-off-by: Oliver Neukum <oneukum@suse.com>
> ---
>  drivers/media/usb/b2c2/flexcop-usb.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
> index 7835bb0f32fc..98d9912a4efb 100644
> --- a/drivers/media/usb/b2c2/flexcop-usb.c
> +++ b/drivers/media/usb/b2c2/flexcop-usb.c
> @@ -446,7 +446,7 @@ static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
>  	/* creating iso urbs */
>  	for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
>  		fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,
> -			GFP_ATOMIC);
> +			GFP_KERNEL);
>  		if (fc_usb->iso_urb[i] == NULL) {
>  			ret = -ENOMEM;
>  			goto urb_error;
> @@ -479,7 +479,7 @@ static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
>  			frame_offset += frame_size;
>  		}
>  
> -		if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
> +		if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_KERNEL))) {

And add the missing space after the comma here.

>  			err("submitting urb %d failed with %d.", i, ret);
>  			goto urb_error;
>  		}

Change itself looks good otherwise.

Reviewed-by: Johan Hovold <johan@kernel.org>

Johan