Re: [PATCH 0/7] phy: qcom-qmp-combo: Support orientation switching

From: Abel Vesa <abel.vesa@linaro.org>
To: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Johan Hovold <johan@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/7] phy: qcom-qmp-combo: Support orientation switching
Date: Wed, 26 Apr 2023 17:25:58 +0300	[thread overview]
Message-ID: <ZEk0dnfoV9IlHlyt@linaro.org> (raw)
In-Reply-To: <20230425034010.3789376-1-quic_bjorande@quicinc.com>

On 23-04-24 20:40:03, Bjorn Andersson wrote:
> This adds support for USB and DisplayPort orientation switching to the
> QMP combo PHY, as well as updating the sc8280xp devices to include the
> QMP in the SuperSpeed graph.
> 

Tested this entire patchset on my X13s. Therefore:

Tested-by: Abel Vesa <abel.vesa@linaro.org>

> Bjorn Andersson (7):
>   dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and
>     orientation-switch
>   phy: qcom-qmp-combo: Move phy_mutex out of com_init/exit
>   phy: qcom-qmp-combo: Introduce orientation variable
>   phy: qcom-qmp-combo: Introduce orientation switching
>   phy: qcom-qmp-combo: Introduce drm_bridge
>   arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph
>   arm64: dts: qcom: sc8280xp-x13s: Add QMP to SuperSpeed graph
> 
>  .../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml    |  51 ++++
>  arch/arm64/boot/dts/qcom/sc8280xp-crd.dts     |  28 ++-
>  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    |  28 ++-
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi        |  34 +++
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c     | 227 ++++++++++++++----
>  5 files changed, 309 insertions(+), 59 deletions(-)
> 
> -- 
> 2.39.2
> 