* [Intel-xe] [PATCH 0/3] Add some performance and frequency sysfs nodes
@ 2023-09-01 12:15 Sujaritha Sundaresan
2023-09-01 12:08 ` [Intel-xe] ✗ CI.Patch_applied: failure for " Patchwork
` (3 more replies)
0 siblings, 4 replies; 17+ messages in thread
From: Sujaritha Sundaresan @ 2023-09-01 12:15 UTC (permalink / raw)
To: intel-xe; +Cc: Sujaritha Sundaresan
Adding base performace and vram frequency attributes to sysfs.
Sujaritha Sundaresan (3):
drm/xe: Add a couple of pcode helpers
drm/xe: Add base performance sysfs attributes
drm/xe: Sysfs entries to query vram fused min, max frequency
drivers/gpu/drm/xe/xe_guc_pc.c | 170 ++++++++++++++++++++++++++++++
drivers/gpu/drm/xe/xe_pcode.c | 28 +++++
drivers/gpu/drm/xe/xe_pcode.h | 3 +
drivers/gpu/drm/xe/xe_pcode_api.h | 19 ++++
4 files changed, 220 insertions(+)
--
2.25.1
^ permalink raw reply [flat|nested] 17+ messages in thread* [Intel-xe] ✗ CI.Patch_applied: failure for Add some performance and frequency sysfs nodes 2023-09-01 12:15 [Intel-xe] [PATCH 0/3] Add some performance and frequency sysfs nodes Sujaritha Sundaresan @ 2023-09-01 12:08 ` Patchwork 2023-09-01 12:15 ` [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers Sujaritha Sundaresan ` (2 subsequent siblings) 3 siblings, 0 replies; 17+ messages in thread From: Patchwork @ 2023-09-01 12:08 UTC (permalink / raw) To: Sujaritha Sundaresan; +Cc: intel-xe == Series Details == Series: Add some performance and frequency sysfs nodes URL : https://patchwork.freedesktop.org/series/123164/ State : failure == Summary == === Applying kernel patches on branch 'drm-xe-next' with base: === Base commit: e4a038763 fixup! drm/xe: Add min/max cap for engine scheduler properties === git am output follows === error: patch failed: drivers/gpu/drm/xe/xe_guc_pc.c:925 error: drivers/gpu/drm/xe/xe_guc_pc.c: patch does not apply hint: Use 'git am --show-current-patch' to see the failed patch Applying: drm/xe: Add a couple of pcode helpers Applying: drm/xe: Add base performance sysfs attributes Patch failed at 0002 drm/xe: Add base performance sysfs attributes When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". ^ permalink raw reply [flat|nested] 17+ messages in thread
* [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers 2023-09-01 12:15 [Intel-xe] [PATCH 0/3] Add some performance and frequency sysfs nodes Sujaritha Sundaresan 2023-09-01 12:08 ` [Intel-xe] ✗ CI.Patch_applied: failure for " Patchwork @ 2023-09-01 12:15 ` Sujaritha Sundaresan 2023-09-01 20:34 ` Rodrigo Vivi 2023-09-01 12:15 ` [Intel-xe] [PATCH 2/3] drm/xe: Add base performance sysfs attributes Sujaritha Sundaresan 2023-09-01 12:15 ` [Intel-xe] [PATCH 3/3, v2] drm/xe: Sysfs entries to query vram fused min, max frequency Sujaritha Sundaresan 3 siblings, 1 reply; 17+ messages in thread From: Sujaritha Sundaresan @ 2023-09-01 12:15 UTC (permalink / raw) To: intel-xe; +Cc: Sujaritha Sundaresan Some pcode commands take additional sub-commands and parameters. Add a couple of helpers to help formatting these commands to improve code readability. Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> --- drivers/gpu/drm/xe/xe_pcode.c | 28 ++++++++++++++++++++++++++++ drivers/gpu/drm/xe/xe_pcode.h | 3 +++ 2 files changed, 31 insertions(+) diff --git a/drivers/gpu/drm/xe/xe_pcode.c b/drivers/gpu/drm/xe/xe_pcode.c index 7f1bf2297f51..e45169f47500 100644 --- a/drivers/gpu/drm/xe/xe_pcode.c +++ b/drivers/gpu/drm/xe/xe_pcode.c @@ -104,6 +104,34 @@ int xe_pcode_read(struct xe_gt *gt, u32 mbox, u32 *val, u32 *val1) return err; } +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 *val) +{ + u32 mbox; + int err; + + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); + + err = xe_pcode_read(gt, mbox, val, NULL); + + return err; +} + +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 val) +{ + u32 mbox; + int err; + + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); + + err = xe_pcode_write(gt, mbox, val); + + return err; +} + static int xe_pcode_try_request(struct xe_gt *gt, u32 mbox, u32 request, u32 reply_mask, u32 reply, u32 *status, bool atomic, int timeout_us) diff --git a/drivers/gpu/drm/xe/xe_pcode.h b/drivers/gpu/drm/xe/xe_pcode.h index 3b4aa8c1a3ba..8d4103afd7e0 100644 --- a/drivers/gpu/drm/xe/xe_pcode.h +++ b/drivers/gpu/drm/xe/xe_pcode.h @@ -19,6 +19,9 @@ int xe_pcode_write_timeout(struct xe_gt *gt, u32 mbox, u32 val, #define xe_pcode_write(gt, mbox, val) \ xe_pcode_write_timeout(gt, mbox, val, 1) +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 *val); +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 val); + int xe_pcode_request(struct xe_gt *gt, u32 mbox, u32 request, u32 reply_mask, u32 reply, int timeout_ms); -- 2.25.1 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers 2023-09-01 12:15 ` [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers Sujaritha Sundaresan @ 2023-09-01 20:34 ` Rodrigo Vivi 2023-09-03 13:30 ` Sundaresan, Sujaritha 0 siblings, 1 reply; 17+ messages in thread From: Rodrigo Vivi @ 2023-09-01 20:34 UTC (permalink / raw) To: Sujaritha Sundaresan; +Cc: intel-xe On Fri, Sep 01, 2023 at 05:45:43PM +0530, Sujaritha Sundaresan wrote: > Some pcode commands take additional sub-commands and parameters. Add a > couple of helpers to help formatting these commands to improve code > readability. > > Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> > --- > drivers/gpu/drm/xe/xe_pcode.c | 28 ++++++++++++++++++++++++++++ > drivers/gpu/drm/xe/xe_pcode.h | 3 +++ > 2 files changed, 31 insertions(+) > > diff --git a/drivers/gpu/drm/xe/xe_pcode.c b/drivers/gpu/drm/xe/xe_pcode.c > index 7f1bf2297f51..e45169f47500 100644 > --- a/drivers/gpu/drm/xe/xe_pcode.c > +++ b/drivers/gpu/drm/xe/xe_pcode.c > @@ -104,6 +104,34 @@ int xe_pcode_read(struct xe_gt *gt, u32 mbox, u32 *val, u32 *val1) > return err; > } > a doc would be required... > +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 *val) a better name would be nice.... > +{ > + u32 mbox; > + int err; > + > + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) > + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) > + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); > + > + err = xe_pcode_read(gt, mbox, val, NULL); but why not simply modifying the existent one to accept 2 params? int xe_pcode_read(struct xe_gt *gt, u32 mbox_param1, u32 mbox_param2, u32 *val, u32 *val1) and the equivalent write... oh, and while doing that, could you please add the missing documentation to these 2 functions? Thanks, Rodrigo. > + > + return err; > +} > + > +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 val) > +{ > + u32 mbox; > + int err; > + > + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) > + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) > + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); > + > + err = xe_pcode_write(gt, mbox, val); > + > + return err; > +} > + > static int xe_pcode_try_request(struct xe_gt *gt, u32 mbox, > u32 request, u32 reply_mask, u32 reply, > u32 *status, bool atomic, int timeout_us) > diff --git a/drivers/gpu/drm/xe/xe_pcode.h b/drivers/gpu/drm/xe/xe_pcode.h > index 3b4aa8c1a3ba..8d4103afd7e0 100644 > --- a/drivers/gpu/drm/xe/xe_pcode.h > +++ b/drivers/gpu/drm/xe/xe_pcode.h > @@ -19,6 +19,9 @@ int xe_pcode_write_timeout(struct xe_gt *gt, u32 mbox, u32 val, > #define xe_pcode_write(gt, mbox, val) \ > xe_pcode_write_timeout(gt, mbox, val, 1) > > +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 *val); > +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 val); > + > int xe_pcode_request(struct xe_gt *gt, u32 mbox, u32 request, > u32 reply_mask, u32 reply, int timeout_ms); > > -- > 2.25.1 > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers 2023-09-01 20:34 ` Rodrigo Vivi @ 2023-09-03 13:30 ` Sundaresan, Sujaritha 2023-09-12 5:08 ` Sundaresan, Sujaritha 0 siblings, 1 reply; 17+ messages in thread From: Sundaresan, Sujaritha @ 2023-09-03 13:30 UTC (permalink / raw) To: Rodrigo Vivi; +Cc: intel-xe On 9/2/2023 2:04 AM, Rodrigo Vivi wrote: > On Fri, Sep 01, 2023 at 05:45:43PM +0530, Sujaritha Sundaresan wrote: >> Some pcode commands take additional sub-commands and parameters. Add a >> couple of helpers to help formatting these commands to improve code >> readability. >> >> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> >> --- >> drivers/gpu/drm/xe/xe_pcode.c | 28 ++++++++++++++++++++++++++++ >> drivers/gpu/drm/xe/xe_pcode.h | 3 +++ >> 2 files changed, 31 insertions(+) >> >> diff --git a/drivers/gpu/drm/xe/xe_pcode.c b/drivers/gpu/drm/xe/xe_pcode.c >> index 7f1bf2297f51..e45169f47500 100644 >> --- a/drivers/gpu/drm/xe/xe_pcode.c >> +++ b/drivers/gpu/drm/xe/xe_pcode.c >> @@ -104,6 +104,34 @@ int xe_pcode_read(struct xe_gt *gt, u32 mbox, u32 *val, u32 *val1) >> return err; >> } >> > a doc would be required... > >> +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 *val) > a better name would be nice.... > >> +{ >> + u32 mbox; >> + int err; >> + >> + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) >> + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) >> + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); >> + >> + err = xe_pcode_read(gt, mbox, val, NULL); > but why not simply modifying the existent one to accept 2 params? > > int xe_pcode_read(struct xe_gt *gt, u32 mbox_param1, u32 mbox_param2, > u32 *val, u32 *val1) > > and the equivalent write... > > oh, and while doing that, could you please add the missing documentation > to these 2 functions? > > Thanks, > Rodrigo. Sure that would work. Will add the docs as well. Thanks, Suja > >> + >> + return err; >> +} >> + >> +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 val) >> +{ >> + u32 mbox; >> + int err; >> + >> + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) >> + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) >> + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); >> + >> + err = xe_pcode_write(gt, mbox, val); >> + >> + return err; >> +} >> + >> static int xe_pcode_try_request(struct xe_gt *gt, u32 mbox, >> u32 request, u32 reply_mask, u32 reply, >> u32 *status, bool atomic, int timeout_us) >> diff --git a/drivers/gpu/drm/xe/xe_pcode.h b/drivers/gpu/drm/xe/xe_pcode.h >> index 3b4aa8c1a3ba..8d4103afd7e0 100644 >> --- a/drivers/gpu/drm/xe/xe_pcode.h >> +++ b/drivers/gpu/drm/xe/xe_pcode.h >> @@ -19,6 +19,9 @@ int xe_pcode_write_timeout(struct xe_gt *gt, u32 mbox, u32 val, >> #define xe_pcode_write(gt, mbox, val) \ >> xe_pcode_write_timeout(gt, mbox, val, 1) >> >> +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 *val); >> +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, u32 val); >> + >> int xe_pcode_request(struct xe_gt *gt, u32 mbox, u32 request, >> u32 reply_mask, u32 reply, int timeout_ms); >> >> -- >> 2.25.1 >> ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers 2023-09-03 13:30 ` Sundaresan, Sujaritha @ 2023-09-12 5:08 ` Sundaresan, Sujaritha 2023-09-12 14:33 ` Rodrigo Vivi 0 siblings, 1 reply; 17+ messages in thread From: Sundaresan, Sujaritha @ 2023-09-12 5:08 UTC (permalink / raw) To: Rodrigo Vivi; +Cc: intel-xe On 9/3/2023 7:00 PM, Sundaresan, Sujaritha wrote: > > On 9/2/2023 2:04 AM, Rodrigo Vivi wrote: >> On Fri, Sep 01, 2023 at 05:45:43PM +0530, Sujaritha Sundaresan wrote: >>> Some pcode commands take additional sub-commands and parameters. Add a >>> couple of helpers to help formatting these commands to improve code >>> readability. >>> >>> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> >>> --- >>> drivers/gpu/drm/xe/xe_pcode.c | 28 ++++++++++++++++++++++++++++ >>> drivers/gpu/drm/xe/xe_pcode.h | 3 +++ >>> 2 files changed, 31 insertions(+) >>> >>> diff --git a/drivers/gpu/drm/xe/xe_pcode.c >>> b/drivers/gpu/drm/xe/xe_pcode.c >>> index 7f1bf2297f51..e45169f47500 100644 >>> --- a/drivers/gpu/drm/xe/xe_pcode.c >>> +++ b/drivers/gpu/drm/xe/xe_pcode.c >>> @@ -104,6 +104,34 @@ int xe_pcode_read(struct xe_gt *gt, u32 mbox, >>> u32 *val, u32 *val1) >>> return err; >>> } >> a doc would be required... >> >>> +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, >>> u32 *val) >> a better name would be nice.... >> >>> +{ >>> + u32 mbox; >>> + int err; >>> + >>> + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) >>> + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) >>> + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); >>> + >>> + err = xe_pcode_read(gt, mbox, val, NULL); >> but why not simply modifying the existent one to accept 2 params? >> >> int xe_pcode_read(struct xe_gt *gt, u32 mbox_param1, u32 mbox_param2, >> u32 *val, u32 *val1) >> >> and the equivalent write... >> >> oh, and while doing that, could you please add the missing documentation >> to these 2 functions? >> >> Thanks, >> Rodrigo. > > Sure that would work. Will add the docs as well. > > Thanks, > > Suja Hi Rodrigo, Another question, I can change the existing pcode_read function, but would it be better to have a separate new write equivalent ? > >> >>> + >>> + return err; >>> +} >>> + >>> +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, >>> u32 val) >>> +{ >>> + u32 mbox; >>> + int err; >>> + >>> + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) >>> + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) >>> + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); >>> + >>> + err = xe_pcode_write(gt, mbox, val); >>> + >>> + return err; >>> +} >>> + >>> static int xe_pcode_try_request(struct xe_gt *gt, u32 mbox, >>> u32 request, u32 reply_mask, u32 reply, >>> u32 *status, bool atomic, int timeout_us) >>> diff --git a/drivers/gpu/drm/xe/xe_pcode.h >>> b/drivers/gpu/drm/xe/xe_pcode.h >>> index 3b4aa8c1a3ba..8d4103afd7e0 100644 >>> --- a/drivers/gpu/drm/xe/xe_pcode.h >>> +++ b/drivers/gpu/drm/xe/xe_pcode.h >>> @@ -19,6 +19,9 @@ int xe_pcode_write_timeout(struct xe_gt *gt, u32 >>> mbox, u32 val, >>> #define xe_pcode_write(gt, mbox, val) \ >>> xe_pcode_write_timeout(gt, mbox, val, 1) >>> +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, >>> u32 *val); >>> +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 p2, >>> u32 val); >>> + >>> int xe_pcode_request(struct xe_gt *gt, u32 mbox, u32 request, >>> u32 reply_mask, u32 reply, int timeout_ms); >>> -- >>> 2.25.1 >>> ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers 2023-09-12 5:08 ` Sundaresan, Sujaritha @ 2023-09-12 14:33 ` Rodrigo Vivi 2023-09-13 4:03 ` Sundaresan, Sujaritha 0 siblings, 1 reply; 17+ messages in thread From: Rodrigo Vivi @ 2023-09-12 14:33 UTC (permalink / raw) To: Sundaresan, Sujaritha; +Cc: intel-xe On Tue, Sep 12, 2023 at 10:38:50AM +0530, Sundaresan, Sujaritha wrote: > > On 9/3/2023 7:00 PM, Sundaresan, Sujaritha wrote: > > > > On 9/2/2023 2:04 AM, Rodrigo Vivi wrote: > > > On Fri, Sep 01, 2023 at 05:45:43PM +0530, Sujaritha Sundaresan wrote: > > > > Some pcode commands take additional sub-commands and parameters. Add a > > > > couple of helpers to help formatting these commands to improve code > > > > readability. > > > > > > > > Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> > > > > --- > > > > drivers/gpu/drm/xe/xe_pcode.c | 28 ++++++++++++++++++++++++++++ > > > > drivers/gpu/drm/xe/xe_pcode.h | 3 +++ > > > > 2 files changed, 31 insertions(+) > > > > > > > > diff --git a/drivers/gpu/drm/xe/xe_pcode.c > > > > b/drivers/gpu/drm/xe/xe_pcode.c > > > > index 7f1bf2297f51..e45169f47500 100644 > > > > --- a/drivers/gpu/drm/xe/xe_pcode.c > > > > +++ b/drivers/gpu/drm/xe/xe_pcode.c > > > > @@ -104,6 +104,34 @@ int xe_pcode_read(struct xe_gt *gt, u32 > > > > mbox, u32 *val, u32 *val1) > > > > return err; > > > > } > > > a doc would be required... > > > > > > > +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 > > > > p2, u32 *val) > > > a better name would be nice.... > > > > > > > +{ > > > > + u32 mbox; > > > > + int err; > > > > + > > > > + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) > > > > + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) > > > > + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); > > > > + > > > > + err = xe_pcode_read(gt, mbox, val, NULL); > > > but why not simply modifying the existent one to accept 2 params? > > > > > > int xe_pcode_read(struct xe_gt *gt, u32 mbox_param1, u32 mbox_param2, > > > u32 *val, u32 *val1) > > > > > > and the equivalent write... > > > > > > oh, and while doing that, could you please add the missing documentation > > > to these 2 functions? > > > > > > Thanks, > > > Rodrigo. > > > > Sure that would work. Will add the docs as well. > > > > Thanks, > > > > Suja > > Hi Rodrigo, > > Another question, > > I can change the existing pcode_read function, but would it be better to > have a separate new write equivalent ? I wonder if we should do s/xe_pcode_write_timeout(/xe_pcode_write( where timeout is still an argument but it can be null. And then we merge with your options here and make a single write fn. > > > > > > > > > > + > > > > + return err; > > > > +} > > > > + > > > > +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 > > > > p2, u32 val) > > > > +{ > > > > + u32 mbox; > > > > + int err; > > > > + > > > > + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) > > > > + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) > > > > + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); > > > > + > > > > + err = xe_pcode_write(gt, mbox, val); > > > > + > > > > + return err; > > > > +} > > > > + > > > > static int xe_pcode_try_request(struct xe_gt *gt, u32 mbox, > > > > u32 request, u32 reply_mask, u32 reply, > > > > u32 *status, bool atomic, int timeout_us) > > > > diff --git a/drivers/gpu/drm/xe/xe_pcode.h > > > > b/drivers/gpu/drm/xe/xe_pcode.h > > > > index 3b4aa8c1a3ba..8d4103afd7e0 100644 > > > > --- a/drivers/gpu/drm/xe/xe_pcode.h > > > > +++ b/drivers/gpu/drm/xe/xe_pcode.h > > > > @@ -19,6 +19,9 @@ int xe_pcode_write_timeout(struct xe_gt *gt, > > > > u32 mbox, u32 val, > > > > #define xe_pcode_write(gt, mbox, val) \ > > > > xe_pcode_write_timeout(gt, mbox, val, 1) > > > > +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 > > > > p2, u32 *val); > > > > +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 > > > > p2, u32 val); > > > > + > > > > int xe_pcode_request(struct xe_gt *gt, u32 mbox, u32 request, > > > > u32 reply_mask, u32 reply, int timeout_ms); > > > > -- > > > > 2.25.1 > > > > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers 2023-09-12 14:33 ` Rodrigo Vivi @ 2023-09-13 4:03 ` Sundaresan, Sujaritha 2023-09-25 8:13 ` Sundaresan, Sujaritha 0 siblings, 1 reply; 17+ messages in thread From: Sundaresan, Sujaritha @ 2023-09-13 4:03 UTC (permalink / raw) To: Rodrigo Vivi; +Cc: intel-xe On 9/12/2023 8:03 PM, Rodrigo Vivi wrote: > On Tue, Sep 12, 2023 at 10:38:50AM +0530, Sundaresan, Sujaritha wrote: >> On 9/3/2023 7:00 PM, Sundaresan, Sujaritha wrote: >>> On 9/2/2023 2:04 AM, Rodrigo Vivi wrote: >>>> On Fri, Sep 01, 2023 at 05:45:43PM +0530, Sujaritha Sundaresan wrote: >>>>> Some pcode commands take additional sub-commands and parameters. Add a >>>>> couple of helpers to help formatting these commands to improve code >>>>> readability. >>>>> >>>>> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> >>>>> --- >>>>> drivers/gpu/drm/xe/xe_pcode.c | 28 ++++++++++++++++++++++++++++ >>>>> drivers/gpu/drm/xe/xe_pcode.h | 3 +++ >>>>> 2 files changed, 31 insertions(+) >>>>> >>>>> diff --git a/drivers/gpu/drm/xe/xe_pcode.c >>>>> b/drivers/gpu/drm/xe/xe_pcode.c >>>>> index 7f1bf2297f51..e45169f47500 100644 >>>>> --- a/drivers/gpu/drm/xe/xe_pcode.c >>>>> +++ b/drivers/gpu/drm/xe/xe_pcode.c >>>>> @@ -104,6 +104,34 @@ int xe_pcode_read(struct xe_gt *gt, u32 >>>>> mbox, u32 *val, u32 *val1) >>>>> return err; >>>>> } >>>> a doc would be required... >>>> >>>>> +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 >>>>> p2, u32 *val) >>>> a better name would be nice.... >>>> >>>>> +{ >>>>> + u32 mbox; >>>>> + int err; >>>>> + >>>>> + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) >>>>> + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) >>>>> + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); >>>>> + >>>>> + err = xe_pcode_read(gt, mbox, val, NULL); >>>> but why not simply modifying the existent one to accept 2 params? >>>> >>>> int xe_pcode_read(struct xe_gt *gt, u32 mbox_param1, u32 mbox_param2, >>>> u32 *val, u32 *val1) >>>> >>>> and the equivalent write... >>>> >>>> oh, and while doing that, could you please add the missing documentation >>>> to these 2 functions? >>>> >>>> Thanks, >>>> Rodrigo. >>> Sure that would work. Will add the docs as well. >>> >>> Thanks, >>> >>> Suja >> Hi Rodrigo, >> >> Another question, >> >> I can change the existing pcode_read function, but would it be better to >> have a separate new write equivalent ? > I wonder if we should do s/xe_pcode_write_timeout(/xe_pcode_write( > > where timeout is still an argument but it can be null. > And then we merge with your options here and make a single write fn. I'll see if this works out. Thanks, Suja > >>>>> + >>>>> + return err; >>>>> +} >>>>> + >>>>> +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 >>>>> p2, u32 val) >>>>> +{ >>>>> + u32 mbox; >>>>> + int err; >>>>> + >>>>> + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) >>>>> + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) >>>>> + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); >>>>> + >>>>> + err = xe_pcode_write(gt, mbox, val); >>>>> + >>>>> + return err; >>>>> +} >>>>> + >>>>> static int xe_pcode_try_request(struct xe_gt *gt, u32 mbox, >>>>> u32 request, u32 reply_mask, u32 reply, >>>>> u32 *status, bool atomic, int timeout_us) >>>>> diff --git a/drivers/gpu/drm/xe/xe_pcode.h >>>>> b/drivers/gpu/drm/xe/xe_pcode.h >>>>> index 3b4aa8c1a3ba..8d4103afd7e0 100644 >>>>> --- a/drivers/gpu/drm/xe/xe_pcode.h >>>>> +++ b/drivers/gpu/drm/xe/xe_pcode.h >>>>> @@ -19,6 +19,9 @@ int xe_pcode_write_timeout(struct xe_gt *gt, >>>>> u32 mbox, u32 val, >>>>> #define xe_pcode_write(gt, mbox, val) \ >>>>> xe_pcode_write_timeout(gt, mbox, val, 1) >>>>> +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 >>>>> p2, u32 *val); >>>>> +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 >>>>> p2, u32 val); >>>>> + >>>>> int xe_pcode_request(struct xe_gt *gt, u32 mbox, u32 request, >>>>> u32 reply_mask, u32 reply, int timeout_ms); >>>>> -- >>>>> 2.25.1 >>>>> ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers 2023-09-13 4:03 ` Sundaresan, Sujaritha @ 2023-09-25 8:13 ` Sundaresan, Sujaritha 2023-09-26 17:39 ` Rodrigo Vivi 0 siblings, 1 reply; 17+ messages in thread From: Sundaresan, Sujaritha @ 2023-09-25 8:13 UTC (permalink / raw) To: Rodrigo Vivi; +Cc: intel-xe On 9/13/2023 9:33 AM, Sundaresan, Sujaritha wrote: > > On 9/12/2023 8:03 PM, Rodrigo Vivi wrote: >> On Tue, Sep 12, 2023 at 10:38:50AM +0530, Sundaresan, Sujaritha wrote: >>> On 9/3/2023 7:00 PM, Sundaresan, Sujaritha wrote: >>>> On 9/2/2023 2:04 AM, Rodrigo Vivi wrote: >>>>> On Fri, Sep 01, 2023 at 05:45:43PM +0530, Sujaritha Sundaresan wrote: >>>>>> Some pcode commands take additional sub-commands and parameters. >>>>>> Add a >>>>>> couple of helpers to help formatting these commands to improve code >>>>>> readability. >>>>>> >>>>>> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> >>>>>> --- >>>>>> drivers/gpu/drm/xe/xe_pcode.c | 28 ++++++++++++++++++++++++++++ >>>>>> drivers/gpu/drm/xe/xe_pcode.h | 3 +++ >>>>>> 2 files changed, 31 insertions(+) >>>>>> >>>>>> diff --git a/drivers/gpu/drm/xe/xe_pcode.c >>>>>> b/drivers/gpu/drm/xe/xe_pcode.c >>>>>> index 7f1bf2297f51..e45169f47500 100644 >>>>>> --- a/drivers/gpu/drm/xe/xe_pcode.c >>>>>> +++ b/drivers/gpu/drm/xe/xe_pcode.c >>>>>> @@ -104,6 +104,34 @@ int xe_pcode_read(struct xe_gt *gt, u32 >>>>>> mbox, u32 *val, u32 *val1) >>>>>> return err; >>>>>> } >>>>> a doc would be required... >>>>> >>>>>> +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 >>>>>> p2, u32 *val) >>>>> a better name would be nice.... >>>>> >>>>>> +{ >>>>>> + u32 mbox; >>>>>> + int err; >>>>>> + >>>>>> + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) >>>>>> + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) >>>>>> + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); >>>>>> + >>>>>> + err = xe_pcode_read(gt, mbox, val, NULL); >>>>> but why not simply modifying the existent one to accept 2 params? >>>>> >>>>> int xe_pcode_read(struct xe_gt *gt, u32 mbox_param1, u32 mbox_param2, >>>>> u32 *val, u32 *val1) >>>>> >>>>> and the equivalent write... >>>>> >>>>> oh, and while doing that, could you please add the missing >>>>> documentation >>>>> to these 2 functions? >>>>> >>>>> Thanks, >>>>> Rodrigo. >>>> Sure that would work. Will add the docs as well. >>>> >>>> Thanks, >>>> >>>> Suja >>> Hi Rodrigo, >>> >>> Another question, >>> >>> I can change the existing pcode_read function, but would it be >>> better to >>> have a separate new write equivalent ? >> I wonder if we should do s/xe_pcode_write_timeout(/xe_pcode_write( >> >> where timeout is still an argument but it can be null. >> And then we merge with your options here and make a single write fn. > > I'll see if this works out. > > Thanks, > > Suja > Hi Rodrigo, As I am making the final fixes, looks like it would be better to have separate new read/write functions. With changing the existing read/write functions, we are having to change the pcode_mailbox_rw function. That is causing issues with other existing functions. Shall I keep the new functions defined separately ? Thanks, Suja >> >>>>>> + >>>>>> + return err; >>>>>> +} >>>>>> + >>>>>> +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 >>>>>> p2, u32 val) >>>>>> +{ >>>>>> + u32 mbox; >>>>>> + int err; >>>>>> + >>>>>> + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) >>>>>> + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) >>>>>> + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); >>>>>> + >>>>>> + err = xe_pcode_write(gt, mbox, val); >>>>>> + >>>>>> + return err; >>>>>> +} >>>>>> + >>>>>> static int xe_pcode_try_request(struct xe_gt *gt, u32 mbox, >>>>>> u32 request, u32 reply_mask, u32 reply, >>>>>> u32 *status, bool atomic, int timeout_us) >>>>>> diff --git a/drivers/gpu/drm/xe/xe_pcode.h >>>>>> b/drivers/gpu/drm/xe/xe_pcode.h >>>>>> index 3b4aa8c1a3ba..8d4103afd7e0 100644 >>>>>> --- a/drivers/gpu/drm/xe/xe_pcode.h >>>>>> +++ b/drivers/gpu/drm/xe/xe_pcode.h >>>>>> @@ -19,6 +19,9 @@ int xe_pcode_write_timeout(struct xe_gt *gt, >>>>>> u32 mbox, u32 val, >>>>>> #define xe_pcode_write(gt, mbox, val) \ >>>>>> xe_pcode_write_timeout(gt, mbox, val, 1) >>>>>> +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 >>>>>> p2, u32 *val); >>>>>> +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 >>>>>> p2, u32 val); >>>>>> + >>>>>> int xe_pcode_request(struct xe_gt *gt, u32 mbox, u32 request, >>>>>> u32 reply_mask, u32 reply, int timeout_ms); >>>>>> -- >>>>>> 2.25.1 >>>>>> ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers 2023-09-25 8:13 ` Sundaresan, Sujaritha @ 2023-09-26 17:39 ` Rodrigo Vivi 0 siblings, 0 replies; 17+ messages in thread From: Rodrigo Vivi @ 2023-09-26 17:39 UTC (permalink / raw) To: Sundaresan, Sujaritha; +Cc: intel-xe On Mon, Sep 25, 2023 at 01:43:07PM +0530, Sundaresan, Sujaritha wrote: > > On 9/13/2023 9:33 AM, Sundaresan, Sujaritha wrote: > > > > On 9/12/2023 8:03 PM, Rodrigo Vivi wrote: > > > On Tue, Sep 12, 2023 at 10:38:50AM +0530, Sundaresan, Sujaritha wrote: > > > > On 9/3/2023 7:00 PM, Sundaresan, Sujaritha wrote: > > > > > On 9/2/2023 2:04 AM, Rodrigo Vivi wrote: > > > > > > On Fri, Sep 01, 2023 at 05:45:43PM +0530, Sujaritha Sundaresan wrote: > > > > > > > Some pcode commands take additional sub-commands and > > > > > > > parameters. Add a > > > > > > > couple of helpers to help formatting these commands to improve code > > > > > > > readability. > > > > > > > > > > > > > > Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> > > > > > > > --- > > > > > > > drivers/gpu/drm/xe/xe_pcode.c | 28 ++++++++++++++++++++++++++++ > > > > > > > drivers/gpu/drm/xe/xe_pcode.h | 3 +++ > > > > > > > 2 files changed, 31 insertions(+) > > > > > > > > > > > > > > diff --git a/drivers/gpu/drm/xe/xe_pcode.c > > > > > > > b/drivers/gpu/drm/xe/xe_pcode.c > > > > > > > index 7f1bf2297f51..e45169f47500 100644 > > > > > > > --- a/drivers/gpu/drm/xe/xe_pcode.c > > > > > > > +++ b/drivers/gpu/drm/xe/xe_pcode.c > > > > > > > @@ -104,6 +104,34 @@ int xe_pcode_read(struct xe_gt *gt, u32 > > > > > > > mbox, u32 *val, u32 *val1) > > > > > > > return err; > > > > > > > } > > > > > > a doc would be required... > > > > > > > > > > > > > +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 > > > > > > > p2, u32 *val) > > > > > > a better name would be nice.... > > > > > > > > > > > > > +{ > > > > > > > + u32 mbox; > > > > > > > + int err; > > > > > > > + > > > > > > > + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) > > > > > > > + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) > > > > > > > + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); > > > > > > > + > > > > > > > + err = xe_pcode_read(gt, mbox, val, NULL); > > > > > > but why not simply modifying the existent one to accept 2 params? > > > > > > > > > > > > int xe_pcode_read(struct xe_gt *gt, u32 mbox_param1, u32 mbox_param2, > > > > > > u32 *val, u32 *val1) > > > > > > > > > > > > and the equivalent write... > > > > > > > > > > > > oh, and while doing that, could you please add the > > > > > > missing documentation > > > > > > to these 2 functions? > > > > > > > > > > > > Thanks, > > > > > > Rodrigo. > > > > > Sure that would work. Will add the docs as well. > > > > > > > > > > Thanks, > > > > > > > > > > Suja > > > > Hi Rodrigo, > > > > > > > > Another question, > > > > > > > > I can change the existing pcode_read function, but would it be > > > > better to > > > > have a separate new write equivalent ? > > > I wonder if we should do s/xe_pcode_write_timeout(/xe_pcode_write( > > > > > > where timeout is still an argument but it can be null. > > > And then we merge with your options here and make a single write fn. > > > > I'll see if this works out. > > > > Thanks, > > > > Suja > > > Hi Rodrigo, > > As I am making the final fixes, looks like it would be better to have > separate new read/write functions. > > With changing the existing read/write functions, we are having to change the > pcode_mailbox_rw function. > > That is causing issues with other existing functions. Shall I keep the new > functions defined separately ? I'm really sorry for having missed this here. I still believe that there are ways of combining them, even if we have to change the internal rw function. But if that gets too complicated or too ugly fine, let's have something alternative, but with a better naming > > Thanks, > > Suja > > > > > > > > > > > + > > > > > > > + return err; > > > > > > > +} > > > > > > > + > > > > > > > +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 > > > > > > > p2, u32 val) > > > > > > > +{ > > > > > > > + u32 mbox; > > > > > > > + int err; > > > > > > > + > > > > > > > + mbox = REG_FIELD_PREP(PCODE_MB_COMMAND, mbcmd) > > > > > > > + | REG_FIELD_PREP(PCODE_MB_PARAM1, p1) > > > > > > > + | REG_FIELD_PREP(PCODE_MB_PARAM2, p2); > > > > > > > + > > > > > > > + err = xe_pcode_write(gt, mbox, val); > > > > > > > + > > > > > > > + return err; > > > > > > > +} > > > > > > > + > > > > > > > static int xe_pcode_try_request(struct xe_gt *gt, u32 mbox, > > > > > > > u32 request, u32 reply_mask, u32 reply, > > > > > > > u32 *status, bool atomic, int timeout_us) > > > > > > > diff --git a/drivers/gpu/drm/xe/xe_pcode.h > > > > > > > b/drivers/gpu/drm/xe/xe_pcode.h > > > > > > > index 3b4aa8c1a3ba..8d4103afd7e0 100644 > > > > > > > --- a/drivers/gpu/drm/xe/xe_pcode.h > > > > > > > +++ b/drivers/gpu/drm/xe/xe_pcode.h > > > > > > > @@ -19,6 +19,9 @@ int xe_pcode_write_timeout(struct xe_gt *gt, > > > > > > > u32 mbox, u32 val, > > > > > > > #define xe_pcode_write(gt, mbox, val) \ > > > > > > > xe_pcode_write_timeout(gt, mbox, val, 1) > > > > > > > +int xe_pcode_read_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 > > > > > > > p2, u32 *val); > > > > > > > +int xe_pcode_write_p(struct xe_gt *gt, u32 mbcmd, u32 p1, u32 > > > > > > > p2, u32 val); > > > > > > > + > > > > > > > int xe_pcode_request(struct xe_gt *gt, u32 mbox, u32 request, > > > > > > > u32 reply_mask, u32 reply, int timeout_ms); > > > > > > > -- > > > > > > > 2.25.1 > > > > > > > ^ permalink raw reply [flat|nested] 17+ messages in thread
* [Intel-xe] [PATCH 2/3] drm/xe: Add base performance sysfs attributes 2023-09-01 12:15 [Intel-xe] [PATCH 0/3] Add some performance and frequency sysfs nodes Sujaritha Sundaresan 2023-09-01 12:08 ` [Intel-xe] ✗ CI.Patch_applied: failure for " Patchwork 2023-09-01 12:15 ` [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers Sujaritha Sundaresan @ 2023-09-01 12:15 ` Sujaritha Sundaresan 2023-09-01 20:35 ` Rodrigo Vivi 2023-09-01 12:15 ` [Intel-xe] [PATCH 3/3, v2] drm/xe: Sysfs entries to query vram fused min, max frequency Sujaritha Sundaresan 3 siblings, 1 reply; 17+ messages in thread From: Sujaritha Sundaresan @ 2023-09-01 12:15 UTC (permalink / raw) To: intel-xe; +Cc: Sujaritha Sundaresan Add the following attribute to Xe sysfs - base_freq_factor - base_freq_factor.scale - base_freq_rp0 - base_freq_rpn Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> --- drivers/gpu/drm/xe/xe_guc_pc.c | 116 ++++++++++++++++++++++++++++++ drivers/gpu/drm/xe/xe_pcode_api.h | 19 +++++ 2 files changed, 135 insertions(+) diff --git a/drivers/gpu/drm/xe/xe_guc_pc.c b/drivers/gpu/drm/xe/xe_guc_pc.c index c03bb58e7049..6a139d1dbf66 100644 --- a/drivers/gpu/drm/xe/xe_guc_pc.c +++ b/drivers/gpu/drm/xe/xe_guc_pc.c @@ -20,6 +20,7 @@ #include "xe_map.h" #include "xe_mmio.h" #include "xe_pcode.h" +#include "xe_pcode_api.h" #define MCHBAR_MIRROR_BASE_SNB 0x140000 @@ -37,6 +38,9 @@ #define GT_FREQUENCY_MULTIPLIER 50 #define GEN9_FREQ_SCALER 3 +#define U8_8_VAL_MASK 0xffff +#define U8_8_SCALE_TO_VALUE "0.00390625" + /** * DOC: GuC Power Conservation (PC) * @@ -642,6 +646,112 @@ static const struct attribute *pc_attrs[] = { NULL }; +static ssize_t freq_factor_scale_show(struct device *dev, + struct device_attribute *attr, + char *buff) +{ + return sysfs_emit(buff, "%s\n", U8_8_SCALE_TO_VALUE); +} + +static ssize_t base_freq_factor_show(struct device *dev, + struct device_attribute *attr, + char *buff) +{ + struct kobject *kobj = &dev->kobj; + struct xe_gt *gt = kobj_to_gt(kobj); + u32 val; + int err; + + err = xe_pcode_read_p(gt, PVC_PCODE_QOS_MULTIPLIER_GET, + PCODE_MBOX_DOMAIN_CHIPLET, + PCODE_MBOX_DOMAIN_BASE, &val); + if (err) + return err; + + val &= U8_8_VAL_MASK; + + return sysfs_emit(buff, "%u\n", val); +} + +static ssize_t base_freq_factor_store(struct device *dev, + struct device_attribute *attr, + const char *buff, size_t count) +{ + struct kobject *kobj = &dev->kobj; + struct xe_gt *gt = kobj_to_gt(kobj); + u32 val; + int err; + + err = kstrtou32(buff, 0, &val); + if (err) + return err; + + if (val > U8_8_VAL_MASK) + return -EINVAL; + + err = xe_pcode_write_p(gt, PVC_PCODE_QOS_MULTIPLIER_SET, + PCODE_MBOX_DOMAIN_CHIPLET, + PCODE_MBOX_DOMAIN_BASE, val); + if (err) + return err; + + return count; +} +static DEVICE_ATTR_RW(base_freq_factor); +static struct device_attribute dev_attr_base_freq_factor_scale = + __ATTR(base_freq_factor.scale, 0444, freq_factor_scale_show, NULL); + + +static ssize_t base_freq_rp0_show(struct device *dev, struct device_attribute *attr, + char *buff) +{ + struct kobject *kobj = &dev->kobj; + struct xe_gt *gt = kobj_to_gt(kobj); + u32 val; + int err; + + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, + PCODE_MBOX_FC_SC_READ_FUSED_P0, + PCODE_MBOX_DOMAIN_BASE, &val); + if (err) + return err; + + /* data_out - Fused P0 for domain ID in units of 50 MHz */ + val *= GT_FREQUENCY_MULTIPLIER; + + return sysfs_emit(buff, "%u\n", val); +} +static DEVICE_ATTR_RO(base_freq_rp0); + +static ssize_t base_freq_rpn_show(struct device *dev, struct device_attribute *attr, + char *buff) +{ + struct kobject *kobj = &dev->kobj; + struct xe_gt *gt = kobj_to_gt(kobj); + u32 val; + int err; + + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, + PCODE_MBOX_FC_SC_READ_FUSED_PN, + PCODE_MBOX_DOMAIN_BASE, &val); + if (err) + return err; + + /* data_out - Fused Pn for domain ID in units of 50 MHz */ + val *= GT_FREQUENCY_MULTIPLIER; + + return sysfs_emit(buff, "%u\n", val); +} +static DEVICE_ATTR_RO(base_freq_rpn); + +static const struct attribute *pvc_perf_power_attrs[] = { + &dev_attr_base_freq_factor.attr, + &dev_attr_base_freq_factor_scale.attr, + &dev_attr_base_freq_rp0.attr, + &dev_attr_base_freq_rpn.attr, + NULL +}; + static void mtl_init_fused_rp_values(struct xe_guc_pc *pc) { struct xe_gt *gt = pc_to_gt(pc); @@ -925,6 +1035,12 @@ int xe_guc_pc_init(struct xe_guc_pc *pc) if (err) return err; + if (xe->info.platform == XE_PVC) { + err = sysfs_create_files(gt->sysfs, pvc_perf_power_attrs); + if (err) + return err; + } + err = drmm_add_action_or_reset(&xe->drm, pc_fini, pc); if (err) return err; diff --git a/drivers/gpu/drm/xe/xe_pcode_api.h b/drivers/gpu/drm/xe/xe_pcode_api.h index 837ff7c71280..da4114bfaa7a 100644 --- a/drivers/gpu/drm/xe/xe_pcode_api.h +++ b/drivers/gpu/drm/xe/xe_pcode_api.h @@ -30,6 +30,25 @@ #define PCODE_READ_MIN_FREQ_TABLE 0x9 #define PCODE_FREQ_RING_RATIO_SHIFT 16 +#define XEHP_PCODE_FREQUENCY_CONFIG 0x6e /* xehp, pvc */ +/* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */ +#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0 +#define PCODE_MBOX_FC_SC_READ_FUSED_PN 0x1 +/* PCODE_MBOX_DOMAIN_* - mailbox domain IDs */ +/* XEHP_PCODE_FREQUENCY_CONFIG param2 */ +#define PCODE_MBOX_DOMAIN_NONE 0x0 +#define PCODE_MBOX_DOMAIN_GT 0x1 +#define PCODE_MBOX_DOMAIN_HBM 0x2 +#define PCODE_MBOX_DOMAIN_MEDIAFF 0x3 +#define PCODE_MBOX_DOMAIN_MEDIA_SAMPLER 0x4 +#define PCODE_MBOX_DOMAIN_SYSTOLIC_ARRAY 0x5 +#define PCODE_MBOX_DOMAIN_CHIPLET 0x6 +#define PCODE_MBOX_DOMAIN_BASE_CHIPLET_LINK 0x7 +#define PCODE_MBOX_DOMAIN_BASE 0x8 +#define PVC_PCODE_QOS_MULTIPLIER_SET 0x67 +/* See PCODE_MBOX_DOMAIN_* - mailbox domain IDs - param1 and 2 */ +#define PVC_PCODE_QOS_MULTIPLIER_GET 0x66 + /* PCODE Init */ #define DGFX_PCODE_STATUS 0x7E #define DGFX_GET_INIT_STATUS 0x0 -- 2.25.1 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 2/3] drm/xe: Add base performance sysfs attributes 2023-09-01 12:15 ` [Intel-xe] [PATCH 2/3] drm/xe: Add base performance sysfs attributes Sujaritha Sundaresan @ 2023-09-01 20:35 ` Rodrigo Vivi 2023-09-03 13:36 ` Sundaresan, Sujaritha 0 siblings, 1 reply; 17+ messages in thread From: Rodrigo Vivi @ 2023-09-01 20:35 UTC (permalink / raw) To: Sujaritha Sundaresan; +Cc: intel-xe On Fri, Sep 01, 2023 at 05:45:44PM +0530, Sujaritha Sundaresan wrote: > Add the following attribute to Xe sysfs > - base_freq_factor > - base_freq_factor.scale > - base_freq_rp0 > - base_freq_rpn > > Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> > --- > drivers/gpu/drm/xe/xe_guc_pc.c | 116 ++++++++++++++++++++++++++++++ > drivers/gpu/drm/xe/xe_pcode_api.h | 19 +++++ > 2 files changed, 135 insertions(+) > > diff --git a/drivers/gpu/drm/xe/xe_guc_pc.c b/drivers/gpu/drm/xe/xe_guc_pc.c > index c03bb58e7049..6a139d1dbf66 100644 > --- a/drivers/gpu/drm/xe/xe_guc_pc.c > +++ b/drivers/gpu/drm/xe/xe_guc_pc.c again, this has nothing to do with guc_pc. We clearly need a new component to handle the frequency. > @@ -20,6 +20,7 @@ > #include "xe_map.h" > #include "xe_mmio.h" > #include "xe_pcode.h" > +#include "xe_pcode_api.h" > > #define MCHBAR_MIRROR_BASE_SNB 0x140000 > > @@ -37,6 +38,9 @@ > #define GT_FREQUENCY_MULTIPLIER 50 > #define GEN9_FREQ_SCALER 3 > > +#define U8_8_VAL_MASK 0xffff > +#define U8_8_SCALE_TO_VALUE "0.00390625" > + > /** > * DOC: GuC Power Conservation (PC) > * > @@ -642,6 +646,112 @@ static const struct attribute *pc_attrs[] = { > NULL > }; > > +static ssize_t freq_factor_scale_show(struct device *dev, > + struct device_attribute *attr, > + char *buff) > +{ > + return sysfs_emit(buff, "%s\n", U8_8_SCALE_TO_VALUE); > +} > + > +static ssize_t base_freq_factor_show(struct device *dev, > + struct device_attribute *attr, > + char *buff) > +{ > + struct kobject *kobj = &dev->kobj; > + struct xe_gt *gt = kobj_to_gt(kobj); > + u32 val; > + int err; > + > + err = xe_pcode_read_p(gt, PVC_PCODE_QOS_MULTIPLIER_GET, > + PCODE_MBOX_DOMAIN_CHIPLET, > + PCODE_MBOX_DOMAIN_BASE, &val); > + if (err) > + return err; > + > + val &= U8_8_VAL_MASK; > + > + return sysfs_emit(buff, "%u\n", val); > +} > + > +static ssize_t base_freq_factor_store(struct device *dev, > + struct device_attribute *attr, > + const char *buff, size_t count) > +{ > + struct kobject *kobj = &dev->kobj; > + struct xe_gt *gt = kobj_to_gt(kobj); > + u32 val; > + int err; > + > + err = kstrtou32(buff, 0, &val); > + if (err) > + return err; > + > + if (val > U8_8_VAL_MASK) > + return -EINVAL; > + > + err = xe_pcode_write_p(gt, PVC_PCODE_QOS_MULTIPLIER_SET, > + PCODE_MBOX_DOMAIN_CHIPLET, > + PCODE_MBOX_DOMAIN_BASE, val); > + if (err) > + return err; > + > + return count; > +} > +static DEVICE_ATTR_RW(base_freq_factor); > +static struct device_attribute dev_attr_base_freq_factor_scale = > + __ATTR(base_freq_factor.scale, 0444, freq_factor_scale_show, NULL); > + > + > +static ssize_t base_freq_rp0_show(struct device *dev, struct device_attribute *attr, > + char *buff) > +{ > + struct kobject *kobj = &dev->kobj; > + struct xe_gt *gt = kobj_to_gt(kobj); > + u32 val; > + int err; > + > + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, > + PCODE_MBOX_FC_SC_READ_FUSED_P0, > + PCODE_MBOX_DOMAIN_BASE, &val); > + if (err) > + return err; > + > + /* data_out - Fused P0 for domain ID in units of 50 MHz */ > + val *= GT_FREQUENCY_MULTIPLIER; > + > + return sysfs_emit(buff, "%u\n", val); > +} > +static DEVICE_ATTR_RO(base_freq_rp0); > + > +static ssize_t base_freq_rpn_show(struct device *dev, struct device_attribute *attr, > + char *buff) > +{ > + struct kobject *kobj = &dev->kobj; > + struct xe_gt *gt = kobj_to_gt(kobj); > + u32 val; > + int err; > + > + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, > + PCODE_MBOX_FC_SC_READ_FUSED_PN, > + PCODE_MBOX_DOMAIN_BASE, &val); > + if (err) > + return err; > + > + /* data_out - Fused Pn for domain ID in units of 50 MHz */ > + val *= GT_FREQUENCY_MULTIPLIER; > + > + return sysfs_emit(buff, "%u\n", val); > +} > +static DEVICE_ATTR_RO(base_freq_rpn); > + > +static const struct attribute *pvc_perf_power_attrs[] = { > + &dev_attr_base_freq_factor.attr, > + &dev_attr_base_freq_factor_scale.attr, > + &dev_attr_base_freq_rp0.attr, > + &dev_attr_base_freq_rpn.attr, > + NULL > +}; > + > static void mtl_init_fused_rp_values(struct xe_guc_pc *pc) > { > struct xe_gt *gt = pc_to_gt(pc); > @@ -925,6 +1035,12 @@ int xe_guc_pc_init(struct xe_guc_pc *pc) > if (err) > return err; > > + if (xe->info.platform == XE_PVC) { > + err = sysfs_create_files(gt->sysfs, pvc_perf_power_attrs); > + if (err) > + return err; > + } > + > err = drmm_add_action_or_reset(&xe->drm, pc_fini, pc); > if (err) > return err; > diff --git a/drivers/gpu/drm/xe/xe_pcode_api.h b/drivers/gpu/drm/xe/xe_pcode_api.h > index 837ff7c71280..da4114bfaa7a 100644 > --- a/drivers/gpu/drm/xe/xe_pcode_api.h > +++ b/drivers/gpu/drm/xe/xe_pcode_api.h > @@ -30,6 +30,25 @@ > #define PCODE_READ_MIN_FREQ_TABLE 0x9 > #define PCODE_FREQ_RING_RATIO_SHIFT 16 > > +#define XEHP_PCODE_FREQUENCY_CONFIG 0x6e /* xehp, pvc */ > +/* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */ > +#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0 > +#define PCODE_MBOX_FC_SC_READ_FUSED_PN 0x1 > +/* PCODE_MBOX_DOMAIN_* - mailbox domain IDs */ > +/* XEHP_PCODE_FREQUENCY_CONFIG param2 */ > +#define PCODE_MBOX_DOMAIN_NONE 0x0 > +#define PCODE_MBOX_DOMAIN_GT 0x1 > +#define PCODE_MBOX_DOMAIN_HBM 0x2 > +#define PCODE_MBOX_DOMAIN_MEDIAFF 0x3 > +#define PCODE_MBOX_DOMAIN_MEDIA_SAMPLER 0x4 > +#define PCODE_MBOX_DOMAIN_SYSTOLIC_ARRAY 0x5 > +#define PCODE_MBOX_DOMAIN_CHIPLET 0x6 > +#define PCODE_MBOX_DOMAIN_BASE_CHIPLET_LINK 0x7 > +#define PCODE_MBOX_DOMAIN_BASE 0x8 > +#define PVC_PCODE_QOS_MULTIPLIER_SET 0x67 > +/* See PCODE_MBOX_DOMAIN_* - mailbox domain IDs - param1 and 2 */ > +#define PVC_PCODE_QOS_MULTIPLIER_GET 0x66 > + > /* PCODE Init */ > #define DGFX_PCODE_STATUS 0x7E > #define DGFX_GET_INIT_STATUS 0x0 > -- > 2.25.1 > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 2/3] drm/xe: Add base performance sysfs attributes 2023-09-01 20:35 ` Rodrigo Vivi @ 2023-09-03 13:36 ` Sundaresan, Sujaritha 2023-09-12 8:48 ` Sundaresan, Sujaritha 0 siblings, 1 reply; 17+ messages in thread From: Sundaresan, Sujaritha @ 2023-09-03 13:36 UTC (permalink / raw) To: Rodrigo Vivi; +Cc: intel-xe On 9/2/2023 2:05 AM, Rodrigo Vivi wrote: > On Fri, Sep 01, 2023 at 05:45:44PM +0530, Sujaritha Sundaresan wrote: >> Add the following attribute to Xe sysfs >> - base_freq_factor >> - base_freq_factor.scale >> - base_freq_rp0 >> - base_freq_rpn >> >> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> >> --- >> drivers/gpu/drm/xe/xe_guc_pc.c | 116 ++++++++++++++++++++++++++++++ >> drivers/gpu/drm/xe/xe_pcode_api.h | 19 +++++ >> 2 files changed, 135 insertions(+) >> >> diff --git a/drivers/gpu/drm/xe/xe_guc_pc.c b/drivers/gpu/drm/xe/xe_guc_pc.c >> index c03bb58e7049..6a139d1dbf66 100644 >> --- a/drivers/gpu/drm/xe/xe_guc_pc.c >> +++ b/drivers/gpu/drm/xe/xe_guc_pc.c > again, this has nothing to do with guc_pc. > We clearly need a new component to handle the frequency. Right. will look to define a new xe_freq component Thanks, Suja > >> @@ -20,6 +20,7 @@ >> #include "xe_map.h" >> #include "xe_mmio.h" >> #include "xe_pcode.h" >> +#include "xe_pcode_api.h" >> >> #define MCHBAR_MIRROR_BASE_SNB 0x140000 >> >> @@ -37,6 +38,9 @@ >> #define GT_FREQUENCY_MULTIPLIER 50 >> #define GEN9_FREQ_SCALER 3 >> >> +#define U8_8_VAL_MASK 0xffff >> +#define U8_8_SCALE_TO_VALUE "0.00390625" >> + >> /** >> * DOC: GuC Power Conservation (PC) >> * >> @@ -642,6 +646,112 @@ static const struct attribute *pc_attrs[] = { >> NULL >> }; >> >> +static ssize_t freq_factor_scale_show(struct device *dev, >> + struct device_attribute *attr, >> + char *buff) >> +{ >> + return sysfs_emit(buff, "%s\n", U8_8_SCALE_TO_VALUE); >> +} >> + >> +static ssize_t base_freq_factor_show(struct device *dev, >> + struct device_attribute *attr, >> + char *buff) >> +{ >> + struct kobject *kobj = &dev->kobj; >> + struct xe_gt *gt = kobj_to_gt(kobj); >> + u32 val; >> + int err; >> + >> + err = xe_pcode_read_p(gt, PVC_PCODE_QOS_MULTIPLIER_GET, >> + PCODE_MBOX_DOMAIN_CHIPLET, >> + PCODE_MBOX_DOMAIN_BASE, &val); >> + if (err) >> + return err; >> + >> + val &= U8_8_VAL_MASK; >> + >> + return sysfs_emit(buff, "%u\n", val); >> +} >> + >> +static ssize_t base_freq_factor_store(struct device *dev, >> + struct device_attribute *attr, >> + const char *buff, size_t count) >> +{ >> + struct kobject *kobj = &dev->kobj; >> + struct xe_gt *gt = kobj_to_gt(kobj); >> + u32 val; >> + int err; >> + >> + err = kstrtou32(buff, 0, &val); >> + if (err) >> + return err; >> + >> + if (val > U8_8_VAL_MASK) >> + return -EINVAL; >> + >> + err = xe_pcode_write_p(gt, PVC_PCODE_QOS_MULTIPLIER_SET, >> + PCODE_MBOX_DOMAIN_CHIPLET, >> + PCODE_MBOX_DOMAIN_BASE, val); >> + if (err) >> + return err; >> + >> + return count; >> +} >> +static DEVICE_ATTR_RW(base_freq_factor); >> +static struct device_attribute dev_attr_base_freq_factor_scale = >> + __ATTR(base_freq_factor.scale, 0444, freq_factor_scale_show, NULL); >> + >> + >> +static ssize_t base_freq_rp0_show(struct device *dev, struct device_attribute *attr, >> + char *buff) >> +{ >> + struct kobject *kobj = &dev->kobj; >> + struct xe_gt *gt = kobj_to_gt(kobj); >> + u32 val; >> + int err; >> + >> + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, >> + PCODE_MBOX_FC_SC_READ_FUSED_P0, >> + PCODE_MBOX_DOMAIN_BASE, &val); >> + if (err) >> + return err; >> + >> + /* data_out - Fused P0 for domain ID in units of 50 MHz */ >> + val *= GT_FREQUENCY_MULTIPLIER; >> + >> + return sysfs_emit(buff, "%u\n", val); >> +} >> +static DEVICE_ATTR_RO(base_freq_rp0); >> + >> +static ssize_t base_freq_rpn_show(struct device *dev, struct device_attribute *attr, >> + char *buff) >> +{ >> + struct kobject *kobj = &dev->kobj; >> + struct xe_gt *gt = kobj_to_gt(kobj); >> + u32 val; >> + int err; >> + >> + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, >> + PCODE_MBOX_FC_SC_READ_FUSED_PN, >> + PCODE_MBOX_DOMAIN_BASE, &val); >> + if (err) >> + return err; >> + >> + /* data_out - Fused Pn for domain ID in units of 50 MHz */ >> + val *= GT_FREQUENCY_MULTIPLIER; >> + >> + return sysfs_emit(buff, "%u\n", val); >> +} >> +static DEVICE_ATTR_RO(base_freq_rpn); >> + >> +static const struct attribute *pvc_perf_power_attrs[] = { >> + &dev_attr_base_freq_factor.attr, >> + &dev_attr_base_freq_factor_scale.attr, >> + &dev_attr_base_freq_rp0.attr, >> + &dev_attr_base_freq_rpn.attr, >> + NULL >> +}; >> + >> static void mtl_init_fused_rp_values(struct xe_guc_pc *pc) >> { >> struct xe_gt *gt = pc_to_gt(pc); >> @@ -925,6 +1035,12 @@ int xe_guc_pc_init(struct xe_guc_pc *pc) >> if (err) >> return err; >> >> + if (xe->info.platform == XE_PVC) { >> + err = sysfs_create_files(gt->sysfs, pvc_perf_power_attrs); >> + if (err) >> + return err; >> + } >> + >> err = drmm_add_action_or_reset(&xe->drm, pc_fini, pc); >> if (err) >> return err; >> diff --git a/drivers/gpu/drm/xe/xe_pcode_api.h b/drivers/gpu/drm/xe/xe_pcode_api.h >> index 837ff7c71280..da4114bfaa7a 100644 >> --- a/drivers/gpu/drm/xe/xe_pcode_api.h >> +++ b/drivers/gpu/drm/xe/xe_pcode_api.h >> @@ -30,6 +30,25 @@ >> #define PCODE_READ_MIN_FREQ_TABLE 0x9 >> #define PCODE_FREQ_RING_RATIO_SHIFT 16 >> >> +#define XEHP_PCODE_FREQUENCY_CONFIG 0x6e /* xehp, pvc */ >> +/* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */ >> +#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0 >> +#define PCODE_MBOX_FC_SC_READ_FUSED_PN 0x1 >> +/* PCODE_MBOX_DOMAIN_* - mailbox domain IDs */ >> +/* XEHP_PCODE_FREQUENCY_CONFIG param2 */ >> +#define PCODE_MBOX_DOMAIN_NONE 0x0 >> +#define PCODE_MBOX_DOMAIN_GT 0x1 >> +#define PCODE_MBOX_DOMAIN_HBM 0x2 >> +#define PCODE_MBOX_DOMAIN_MEDIAFF 0x3 >> +#define PCODE_MBOX_DOMAIN_MEDIA_SAMPLER 0x4 >> +#define PCODE_MBOX_DOMAIN_SYSTOLIC_ARRAY 0x5 >> +#define PCODE_MBOX_DOMAIN_CHIPLET 0x6 >> +#define PCODE_MBOX_DOMAIN_BASE_CHIPLET_LINK 0x7 >> +#define PCODE_MBOX_DOMAIN_BASE 0x8 >> +#define PVC_PCODE_QOS_MULTIPLIER_SET 0x67 >> +/* See PCODE_MBOX_DOMAIN_* - mailbox domain IDs - param1 and 2 */ >> +#define PVC_PCODE_QOS_MULTIPLIER_GET 0x66 >> + >> /* PCODE Init */ >> #define DGFX_PCODE_STATUS 0x7E >> #define DGFX_GET_INIT_STATUS 0x0 >> -- >> 2.25.1 >> ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 2/3] drm/xe: Add base performance sysfs attributes 2023-09-03 13:36 ` Sundaresan, Sujaritha @ 2023-09-12 8:48 ` Sundaresan, Sujaritha 2023-09-12 14:34 ` Rodrigo Vivi 0 siblings, 1 reply; 17+ messages in thread From: Sundaresan, Sujaritha @ 2023-09-12 8:48 UTC (permalink / raw) To: Rodrigo Vivi; +Cc: intel-xe On 9/3/2023 7:06 PM, Sundaresan, Sujaritha wrote: > > On 9/2/2023 2:05 AM, Rodrigo Vivi wrote: >> On Fri, Sep 01, 2023 at 05:45:44PM +0530, Sujaritha Sundaresan wrote: >>> Add the following attribute to Xe sysfs >>> - base_freq_factor >>> - base_freq_factor.scale >>> - base_freq_rp0 >>> - base_freq_rpn >>> >>> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> >>> --- >>> drivers/gpu/drm/xe/xe_guc_pc.c | 116 >>> ++++++++++++++++++++++++++++++ >>> drivers/gpu/drm/xe/xe_pcode_api.h | 19 +++++ >>> 2 files changed, 135 insertions(+) >>> >>> diff --git a/drivers/gpu/drm/xe/xe_guc_pc.c >>> b/drivers/gpu/drm/xe/xe_guc_pc.c >>> index c03bb58e7049..6a139d1dbf66 100644 >>> --- a/drivers/gpu/drm/xe/xe_guc_pc.c >>> +++ b/drivers/gpu/drm/xe/xe_guc_pc.c >> again, this has nothing to do with guc_pc. >> We clearly need a new component to handle the frequency. > > Right. will look to define a new xe_freq component > > Thanks, > > Suja Hi Rodrigo, I've moved a lot of the frequency attributes I'm adding to a new file with a new xe_freq component. Does that work for this ? Thanks, Suja > > >> >>> @@ -20,6 +20,7 @@ >>> #include "xe_map.h" >>> #include "xe_mmio.h" >>> #include "xe_pcode.h" >>> +#include "xe_pcode_api.h" >>> #define MCHBAR_MIRROR_BASE_SNB 0x140000 >>> @@ -37,6 +38,9 @@ >>> #define GT_FREQUENCY_MULTIPLIER 50 >>> #define GEN9_FREQ_SCALER 3 >>> +#define U8_8_VAL_MASK 0xffff >>> +#define U8_8_SCALE_TO_VALUE "0.00390625" >>> + >>> /** >>> * DOC: GuC Power Conservation (PC) >>> * >>> @@ -642,6 +646,112 @@ static const struct attribute *pc_attrs[] = { >>> NULL >>> }; >>> +static ssize_t freq_factor_scale_show(struct device *dev, >>> + struct device_attribute *attr, >>> + char *buff) >>> +{ >>> + return sysfs_emit(buff, "%s\n", U8_8_SCALE_TO_VALUE); >>> +} >>> + >>> +static ssize_t base_freq_factor_show(struct device *dev, >>> + struct device_attribute *attr, >>> + char *buff) >>> +{ >>> + struct kobject *kobj = &dev->kobj; >>> + struct xe_gt *gt = kobj_to_gt(kobj); >>> + u32 val; >>> + int err; >>> + >>> + err = xe_pcode_read_p(gt, PVC_PCODE_QOS_MULTIPLIER_GET, >>> + PCODE_MBOX_DOMAIN_CHIPLET, >>> + PCODE_MBOX_DOMAIN_BASE, &val); >>> + if (err) >>> + return err; >>> + >>> + val &= U8_8_VAL_MASK; >>> + >>> + return sysfs_emit(buff, "%u\n", val); >>> +} >>> + >>> +static ssize_t base_freq_factor_store(struct device *dev, >>> + struct device_attribute *attr, >>> + const char *buff, size_t count) >>> +{ >>> + struct kobject *kobj = &dev->kobj; >>> + struct xe_gt *gt = kobj_to_gt(kobj); >>> + u32 val; >>> + int err; >>> + >>> + err = kstrtou32(buff, 0, &val); >>> + if (err) >>> + return err; >>> + >>> + if (val > U8_8_VAL_MASK) >>> + return -EINVAL; >>> + >>> + err = xe_pcode_write_p(gt, PVC_PCODE_QOS_MULTIPLIER_SET, >>> + PCODE_MBOX_DOMAIN_CHIPLET, >>> + PCODE_MBOX_DOMAIN_BASE, val); >>> + if (err) >>> + return err; >>> + >>> + return count; >>> +} >>> +static DEVICE_ATTR_RW(base_freq_factor); >>> +static struct device_attribute dev_attr_base_freq_factor_scale = >>> + __ATTR(base_freq_factor.scale, 0444, freq_factor_scale_show, >>> NULL); >>> + >>> + >>> +static ssize_t base_freq_rp0_show(struct device *dev, struct >>> device_attribute *attr, >>> + char *buff) >>> +{ >>> + struct kobject *kobj = &dev->kobj; >>> + struct xe_gt *gt = kobj_to_gt(kobj); >>> + u32 val; >>> + int err; >>> + >>> + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, >>> + PCODE_MBOX_FC_SC_READ_FUSED_P0, >>> + PCODE_MBOX_DOMAIN_BASE, &val); >>> + if (err) >>> + return err; >>> + >>> + /* data_out - Fused P0 for domain ID in units of 50 MHz */ >>> + val *= GT_FREQUENCY_MULTIPLIER; >>> + >>> + return sysfs_emit(buff, "%u\n", val); >>> +} >>> +static DEVICE_ATTR_RO(base_freq_rp0); >>> + >>> +static ssize_t base_freq_rpn_show(struct device *dev, struct >>> device_attribute *attr, >>> + char *buff) >>> +{ >>> + struct kobject *kobj = &dev->kobj; >>> + struct xe_gt *gt = kobj_to_gt(kobj); >>> + u32 val; >>> + int err; >>> + >>> + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, >>> + PCODE_MBOX_FC_SC_READ_FUSED_PN, >>> + PCODE_MBOX_DOMAIN_BASE, &val); >>> + if (err) >>> + return err; >>> + >>> + /* data_out - Fused Pn for domain ID in units of 50 MHz */ >>> + val *= GT_FREQUENCY_MULTIPLIER; >>> + >>> + return sysfs_emit(buff, "%u\n", val); >>> +} >>> +static DEVICE_ATTR_RO(base_freq_rpn); >>> + >>> +static const struct attribute *pvc_perf_power_attrs[] = { >>> + &dev_attr_base_freq_factor.attr, >>> + &dev_attr_base_freq_factor_scale.attr, >>> + &dev_attr_base_freq_rp0.attr, >>> + &dev_attr_base_freq_rpn.attr, >>> + NULL >>> +}; >>> + >>> static void mtl_init_fused_rp_values(struct xe_guc_pc *pc) >>> { >>> struct xe_gt *gt = pc_to_gt(pc); >>> @@ -925,6 +1035,12 @@ int xe_guc_pc_init(struct xe_guc_pc *pc) >>> if (err) >>> return err; >>> + if (xe->info.platform == XE_PVC) { >>> + err = sysfs_create_files(gt->sysfs, pvc_perf_power_attrs); >>> + if (err) >>> + return err; >>> + } >>> + >>> err = drmm_add_action_or_reset(&xe->drm, pc_fini, pc); >>> if (err) >>> return err; >>> diff --git a/drivers/gpu/drm/xe/xe_pcode_api.h >>> b/drivers/gpu/drm/xe/xe_pcode_api.h >>> index 837ff7c71280..da4114bfaa7a 100644 >>> --- a/drivers/gpu/drm/xe/xe_pcode_api.h >>> +++ b/drivers/gpu/drm/xe/xe_pcode_api.h >>> @@ -30,6 +30,25 @@ >>> #define PCODE_READ_MIN_FREQ_TABLE 0x9 >>> #define PCODE_FREQ_RING_RATIO_SHIFT 16 >>> +#define XEHP_PCODE_FREQUENCY_CONFIG 0x6e /* xehp, >>> pvc */ >>> +/* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */ >>> +#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0 >>> +#define PCODE_MBOX_FC_SC_READ_FUSED_PN 0x1 >>> +/* PCODE_MBOX_DOMAIN_* - mailbox domain IDs */ >>> +/* XEHP_PCODE_FREQUENCY_CONFIG param2 */ >>> +#define PCODE_MBOX_DOMAIN_NONE 0x0 >>> +#define PCODE_MBOX_DOMAIN_GT 0x1 >>> +#define PCODE_MBOX_DOMAIN_HBM 0x2 >>> +#define PCODE_MBOX_DOMAIN_MEDIAFF 0x3 >>> +#define PCODE_MBOX_DOMAIN_MEDIA_SAMPLER 0x4 >>> +#define PCODE_MBOX_DOMAIN_SYSTOLIC_ARRAY 0x5 >>> +#define PCODE_MBOX_DOMAIN_CHIPLET 0x6 >>> +#define PCODE_MBOX_DOMAIN_BASE_CHIPLET_LINK 0x7 >>> +#define PCODE_MBOX_DOMAIN_BASE 0x8 >>> +#define PVC_PCODE_QOS_MULTIPLIER_SET 0x67 >>> +/* See PCODE_MBOX_DOMAIN_* - mailbox domain IDs - param1 and 2 */ >>> +#define PVC_PCODE_QOS_MULTIPLIER_GET 0x66 >>> + >>> /* PCODE Init */ >>> #define DGFX_PCODE_STATUS 0x7E >>> #define DGFX_GET_INIT_STATUS 0x0 >>> -- >>> 2.25.1 >>> ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 2/3] drm/xe: Add base performance sysfs attributes 2023-09-12 8:48 ` Sundaresan, Sujaritha @ 2023-09-12 14:34 ` Rodrigo Vivi 2023-09-13 4:01 ` Sundaresan, Sujaritha 0 siblings, 1 reply; 17+ messages in thread From: Rodrigo Vivi @ 2023-09-12 14:34 UTC (permalink / raw) To: Sundaresan, Sujaritha; +Cc: intel-xe On Tue, Sep 12, 2023 at 02:18:55PM +0530, Sundaresan, Sujaritha wrote: > > On 9/3/2023 7:06 PM, Sundaresan, Sujaritha wrote: > > > > On 9/2/2023 2:05 AM, Rodrigo Vivi wrote: > > > On Fri, Sep 01, 2023 at 05:45:44PM +0530, Sujaritha Sundaresan wrote: > > > > Add the following attribute to Xe sysfs > > > > - base_freq_factor > > > > - base_freq_factor.scale > > > > - base_freq_rp0 > > > > - base_freq_rpn > > > > > > > > Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> > > > > --- > > > > drivers/gpu/drm/xe/xe_guc_pc.c | 116 > > > > ++++++++++++++++++++++++++++++ > > > > drivers/gpu/drm/xe/xe_pcode_api.h | 19 +++++ > > > > 2 files changed, 135 insertions(+) > > > > > > > > diff --git a/drivers/gpu/drm/xe/xe_guc_pc.c > > > > b/drivers/gpu/drm/xe/xe_guc_pc.c > > > > index c03bb58e7049..6a139d1dbf66 100644 > > > > --- a/drivers/gpu/drm/xe/xe_guc_pc.c > > > > +++ b/drivers/gpu/drm/xe/xe_guc_pc.c > > > again, this has nothing to do with guc_pc. > > > We clearly need a new component to handle the frequency. > > > > Right. will look to define a new xe_freq component > > > > Thanks, > > > > Suja > > Hi Rodrigo, > > I've moved a lot of the frequency attributes I'm adding to a new file > > with a new xe_freq component. > > Does that work for this ? I think so, but I might be missing something. Is this already in the mailing list or some branch that I could peak? > > Thanks, > > Suja > > > > > > > > > > > > @@ -20,6 +20,7 @@ > > > > #include "xe_map.h" > > > > #include "xe_mmio.h" > > > > #include "xe_pcode.h" > > > > +#include "xe_pcode_api.h" > > > > #define MCHBAR_MIRROR_BASE_SNB 0x140000 > > > > @@ -37,6 +38,9 @@ > > > > #define GT_FREQUENCY_MULTIPLIER 50 > > > > #define GEN9_FREQ_SCALER 3 > > > > +#define U8_8_VAL_MASK 0xffff > > > > +#define U8_8_SCALE_TO_VALUE "0.00390625" > > > > + > > > > /** > > > > * DOC: GuC Power Conservation (PC) > > > > * > > > > @@ -642,6 +646,112 @@ static const struct attribute *pc_attrs[] = { > > > > NULL > > > > }; > > > > +static ssize_t freq_factor_scale_show(struct device *dev, > > > > + struct device_attribute *attr, > > > > + char *buff) > > > > +{ > > > > + return sysfs_emit(buff, "%s\n", U8_8_SCALE_TO_VALUE); > > > > +} > > > > + > > > > +static ssize_t base_freq_factor_show(struct device *dev, > > > > + struct device_attribute *attr, > > > > + char *buff) > > > > +{ > > > > + struct kobject *kobj = &dev->kobj; > > > > + struct xe_gt *gt = kobj_to_gt(kobj); > > > > + u32 val; > > > > + int err; > > > > + > > > > + err = xe_pcode_read_p(gt, PVC_PCODE_QOS_MULTIPLIER_GET, > > > > + PCODE_MBOX_DOMAIN_CHIPLET, > > > > + PCODE_MBOX_DOMAIN_BASE, &val); > > > > + if (err) > > > > + return err; > > > > + > > > > + val &= U8_8_VAL_MASK; > > > > + > > > > + return sysfs_emit(buff, "%u\n", val); > > > > +} > > > > + > > > > +static ssize_t base_freq_factor_store(struct device *dev, > > > > + struct device_attribute *attr, > > > > + const char *buff, size_t count) > > > > +{ > > > > + struct kobject *kobj = &dev->kobj; > > > > + struct xe_gt *gt = kobj_to_gt(kobj); > > > > + u32 val; > > > > + int err; > > > > + > > > > + err = kstrtou32(buff, 0, &val); > > > > + if (err) > > > > + return err; > > > > + > > > > + if (val > U8_8_VAL_MASK) > > > > + return -EINVAL; > > > > + > > > > + err = xe_pcode_write_p(gt, PVC_PCODE_QOS_MULTIPLIER_SET, > > > > + PCODE_MBOX_DOMAIN_CHIPLET, > > > > + PCODE_MBOX_DOMAIN_BASE, val); > > > > + if (err) > > > > + return err; > > > > + > > > > + return count; > > > > +} > > > > +static DEVICE_ATTR_RW(base_freq_factor); > > > > +static struct device_attribute dev_attr_base_freq_factor_scale = > > > > + __ATTR(base_freq_factor.scale, 0444, > > > > freq_factor_scale_show, NULL); > > > > + > > > > + > > > > +static ssize_t base_freq_rp0_show(struct device *dev, struct > > > > device_attribute *attr, > > > > + char *buff) > > > > +{ > > > > + struct kobject *kobj = &dev->kobj; > > > > + struct xe_gt *gt = kobj_to_gt(kobj); > > > > + u32 val; > > > > + int err; > > > > + > > > > + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, > > > > + PCODE_MBOX_FC_SC_READ_FUSED_P0, > > > > + PCODE_MBOX_DOMAIN_BASE, &val); > > > > + if (err) > > > > + return err; > > > > + > > > > + /* data_out - Fused P0 for domain ID in units of 50 MHz */ > > > > + val *= GT_FREQUENCY_MULTIPLIER; > > > > + > > > > + return sysfs_emit(buff, "%u\n", val); > > > > +} > > > > +static DEVICE_ATTR_RO(base_freq_rp0); > > > > + > > > > +static ssize_t base_freq_rpn_show(struct device *dev, struct > > > > device_attribute *attr, > > > > + char *buff) > > > > +{ > > > > + struct kobject *kobj = &dev->kobj; > > > > + struct xe_gt *gt = kobj_to_gt(kobj); > > > > + u32 val; > > > > + int err; > > > > + > > > > + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, > > > > + PCODE_MBOX_FC_SC_READ_FUSED_PN, > > > > + PCODE_MBOX_DOMAIN_BASE, &val); > > > > + if (err) > > > > + return err; > > > > + > > > > + /* data_out - Fused Pn for domain ID in units of 50 MHz */ > > > > + val *= GT_FREQUENCY_MULTIPLIER; > > > > + > > > > + return sysfs_emit(buff, "%u\n", val); > > > > +} > > > > +static DEVICE_ATTR_RO(base_freq_rpn); > > > > + > > > > +static const struct attribute *pvc_perf_power_attrs[] = { > > > > + &dev_attr_base_freq_factor.attr, > > > > + &dev_attr_base_freq_factor_scale.attr, > > > > + &dev_attr_base_freq_rp0.attr, > > > > + &dev_attr_base_freq_rpn.attr, > > > > + NULL > > > > +}; > > > > + > > > > static void mtl_init_fused_rp_values(struct xe_guc_pc *pc) > > > > { > > > > struct xe_gt *gt = pc_to_gt(pc); > > > > @@ -925,6 +1035,12 @@ int xe_guc_pc_init(struct xe_guc_pc *pc) > > > > if (err) > > > > return err; > > > > + if (xe->info.platform == XE_PVC) { > > > > + err = sysfs_create_files(gt->sysfs, pvc_perf_power_attrs); > > > > + if (err) > > > > + return err; > > > > + } > > > > + > > > > err = drmm_add_action_or_reset(&xe->drm, pc_fini, pc); > > > > if (err) > > > > return err; > > > > diff --git a/drivers/gpu/drm/xe/xe_pcode_api.h > > > > b/drivers/gpu/drm/xe/xe_pcode_api.h > > > > index 837ff7c71280..da4114bfaa7a 100644 > > > > --- a/drivers/gpu/drm/xe/xe_pcode_api.h > > > > +++ b/drivers/gpu/drm/xe/xe_pcode_api.h > > > > @@ -30,6 +30,25 @@ > > > > #define PCODE_READ_MIN_FREQ_TABLE 0x9 > > > > #define PCODE_FREQ_RING_RATIO_SHIFT 16 > > > > +#define XEHP_PCODE_FREQUENCY_CONFIG 0x6e /* > > > > xehp, pvc */ > > > > +/* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */ > > > > +#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0 > > > > +#define PCODE_MBOX_FC_SC_READ_FUSED_PN 0x1 > > > > +/* PCODE_MBOX_DOMAIN_* - mailbox domain IDs */ > > > > +/* XEHP_PCODE_FREQUENCY_CONFIG param2 */ > > > > +#define PCODE_MBOX_DOMAIN_NONE 0x0 > > > > +#define PCODE_MBOX_DOMAIN_GT 0x1 > > > > +#define PCODE_MBOX_DOMAIN_HBM 0x2 > > > > +#define PCODE_MBOX_DOMAIN_MEDIAFF 0x3 > > > > +#define PCODE_MBOX_DOMAIN_MEDIA_SAMPLER 0x4 > > > > +#define PCODE_MBOX_DOMAIN_SYSTOLIC_ARRAY 0x5 > > > > +#define PCODE_MBOX_DOMAIN_CHIPLET 0x6 > > > > +#define PCODE_MBOX_DOMAIN_BASE_CHIPLET_LINK 0x7 > > > > +#define PCODE_MBOX_DOMAIN_BASE 0x8 > > > > +#define PVC_PCODE_QOS_MULTIPLIER_SET 0x67 > > > > +/* See PCODE_MBOX_DOMAIN_* - mailbox domain IDs - param1 and 2 */ > > > > +#define PVC_PCODE_QOS_MULTIPLIER_GET 0x66 > > > > + > > > > /* PCODE Init */ > > > > #define DGFX_PCODE_STATUS 0x7E > > > > #define DGFX_GET_INIT_STATUS 0x0 > > > > -- > > > > 2.25.1 > > > > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Intel-xe] [PATCH 2/3] drm/xe: Add base performance sysfs attributes 2023-09-12 14:34 ` Rodrigo Vivi @ 2023-09-13 4:01 ` Sundaresan, Sujaritha 0 siblings, 0 replies; 17+ messages in thread From: Sundaresan, Sujaritha @ 2023-09-13 4:01 UTC (permalink / raw) To: Rodrigo Vivi; +Cc: intel-xe On 9/12/2023 8:04 PM, Rodrigo Vivi wrote: > On Tue, Sep 12, 2023 at 02:18:55PM +0530, Sundaresan, Sujaritha wrote: >> On 9/3/2023 7:06 PM, Sundaresan, Sujaritha wrote: >>> On 9/2/2023 2:05 AM, Rodrigo Vivi wrote: >>>> On Fri, Sep 01, 2023 at 05:45:44PM +0530, Sujaritha Sundaresan wrote: >>>>> Add the following attribute to Xe sysfs >>>>> - base_freq_factor >>>>> - base_freq_factor.scale >>>>> - base_freq_rp0 >>>>> - base_freq_rpn >>>>> >>>>> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> >>>>> --- >>>>> drivers/gpu/drm/xe/xe_guc_pc.c | 116 >>>>> ++++++++++++++++++++++++++++++ >>>>> drivers/gpu/drm/xe/xe_pcode_api.h | 19 +++++ >>>>> 2 files changed, 135 insertions(+) >>>>> >>>>> diff --git a/drivers/gpu/drm/xe/xe_guc_pc.c >>>>> b/drivers/gpu/drm/xe/xe_guc_pc.c >>>>> index c03bb58e7049..6a139d1dbf66 100644 >>>>> --- a/drivers/gpu/drm/xe/xe_guc_pc.c >>>>> +++ b/drivers/gpu/drm/xe/xe_guc_pc.c >>>> again, this has nothing to do with guc_pc. >>>> We clearly need a new component to handle the frequency. >>> Right. will look to define a new xe_freq component >>> >>> Thanks, >>> >>> Suja >> Hi Rodrigo, >> >> I've moved a lot of the frequency attributes I'm adding to a new file >> >> with a new xe_freq component. >> >> Does that work for this ? > I think so, but I might be missing something. > Is this already in the mailing list or some branch that I could peak? > >> Thanks, >> >> Suja Sure I can share the branch. There is a throttle reasons patch on the ML, which is similar in concept. That's the direction I went with for the sysfs in this patch as well. Thanks, Suja >> >>> >>>>> @@ -20,6 +20,7 @@ >>>>> #include "xe_map.h" >>>>> #include "xe_mmio.h" >>>>> #include "xe_pcode.h" >>>>> +#include "xe_pcode_api.h" >>>>> #define MCHBAR_MIRROR_BASE_SNB 0x140000 >>>>> @@ -37,6 +38,9 @@ >>>>> #define GT_FREQUENCY_MULTIPLIER 50 >>>>> #define GEN9_FREQ_SCALER 3 >>>>> +#define U8_8_VAL_MASK 0xffff >>>>> +#define U8_8_SCALE_TO_VALUE "0.00390625" >>>>> + >>>>> /** >>>>> * DOC: GuC Power Conservation (PC) >>>>> * >>>>> @@ -642,6 +646,112 @@ static const struct attribute *pc_attrs[] = { >>>>> NULL >>>>> }; >>>>> +static ssize_t freq_factor_scale_show(struct device *dev, >>>>> + struct device_attribute *attr, >>>>> + char *buff) >>>>> +{ >>>>> + return sysfs_emit(buff, "%s\n", U8_8_SCALE_TO_VALUE); >>>>> +} >>>>> + >>>>> +static ssize_t base_freq_factor_show(struct device *dev, >>>>> + struct device_attribute *attr, >>>>> + char *buff) >>>>> +{ >>>>> + struct kobject *kobj = &dev->kobj; >>>>> + struct xe_gt *gt = kobj_to_gt(kobj); >>>>> + u32 val; >>>>> + int err; >>>>> + >>>>> + err = xe_pcode_read_p(gt, PVC_PCODE_QOS_MULTIPLIER_GET, >>>>> + PCODE_MBOX_DOMAIN_CHIPLET, >>>>> + PCODE_MBOX_DOMAIN_BASE, &val); >>>>> + if (err) >>>>> + return err; >>>>> + >>>>> + val &= U8_8_VAL_MASK; >>>>> + >>>>> + return sysfs_emit(buff, "%u\n", val); >>>>> +} >>>>> + >>>>> +static ssize_t base_freq_factor_store(struct device *dev, >>>>> + struct device_attribute *attr, >>>>> + const char *buff, size_t count) >>>>> +{ >>>>> + struct kobject *kobj = &dev->kobj; >>>>> + struct xe_gt *gt = kobj_to_gt(kobj); >>>>> + u32 val; >>>>> + int err; >>>>> + >>>>> + err = kstrtou32(buff, 0, &val); >>>>> + if (err) >>>>> + return err; >>>>> + >>>>> + if (val > U8_8_VAL_MASK) >>>>> + return -EINVAL; >>>>> + >>>>> + err = xe_pcode_write_p(gt, PVC_PCODE_QOS_MULTIPLIER_SET, >>>>> + PCODE_MBOX_DOMAIN_CHIPLET, >>>>> + PCODE_MBOX_DOMAIN_BASE, val); >>>>> + if (err) >>>>> + return err; >>>>> + >>>>> + return count; >>>>> +} >>>>> +static DEVICE_ATTR_RW(base_freq_factor); >>>>> +static struct device_attribute dev_attr_base_freq_factor_scale = >>>>> + __ATTR(base_freq_factor.scale, 0444, >>>>> freq_factor_scale_show, NULL); >>>>> + >>>>> + >>>>> +static ssize_t base_freq_rp0_show(struct device *dev, struct >>>>> device_attribute *attr, >>>>> + char *buff) >>>>> +{ >>>>> + struct kobject *kobj = &dev->kobj; >>>>> + struct xe_gt *gt = kobj_to_gt(kobj); >>>>> + u32 val; >>>>> + int err; >>>>> + >>>>> + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, >>>>> + PCODE_MBOX_FC_SC_READ_FUSED_P0, >>>>> + PCODE_MBOX_DOMAIN_BASE, &val); >>>>> + if (err) >>>>> + return err; >>>>> + >>>>> + /* data_out - Fused P0 for domain ID in units of 50 MHz */ >>>>> + val *= GT_FREQUENCY_MULTIPLIER; >>>>> + >>>>> + return sysfs_emit(buff, "%u\n", val); >>>>> +} >>>>> +static DEVICE_ATTR_RO(base_freq_rp0); >>>>> + >>>>> +static ssize_t base_freq_rpn_show(struct device *dev, struct >>>>> device_attribute *attr, >>>>> + char *buff) >>>>> +{ >>>>> + struct kobject *kobj = &dev->kobj; >>>>> + struct xe_gt *gt = kobj_to_gt(kobj); >>>>> + u32 val; >>>>> + int err; >>>>> + >>>>> + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, >>>>> + PCODE_MBOX_FC_SC_READ_FUSED_PN, >>>>> + PCODE_MBOX_DOMAIN_BASE, &val); >>>>> + if (err) >>>>> + return err; >>>>> + >>>>> + /* data_out - Fused Pn for domain ID in units of 50 MHz */ >>>>> + val *= GT_FREQUENCY_MULTIPLIER; >>>>> + >>>>> + return sysfs_emit(buff, "%u\n", val); >>>>> +} >>>>> +static DEVICE_ATTR_RO(base_freq_rpn); >>>>> + >>>>> +static const struct attribute *pvc_perf_power_attrs[] = { >>>>> + &dev_attr_base_freq_factor.attr, >>>>> + &dev_attr_base_freq_factor_scale.attr, >>>>> + &dev_attr_base_freq_rp0.attr, >>>>> + &dev_attr_base_freq_rpn.attr, >>>>> + NULL >>>>> +}; >>>>> + >>>>> static void mtl_init_fused_rp_values(struct xe_guc_pc *pc) >>>>> { >>>>> struct xe_gt *gt = pc_to_gt(pc); >>>>> @@ -925,6 +1035,12 @@ int xe_guc_pc_init(struct xe_guc_pc *pc) >>>>> if (err) >>>>> return err; >>>>> + if (xe->info.platform == XE_PVC) { >>>>> + err = sysfs_create_files(gt->sysfs, pvc_perf_power_attrs); >>>>> + if (err) >>>>> + return err; >>>>> + } >>>>> + >>>>> err = drmm_add_action_or_reset(&xe->drm, pc_fini, pc); >>>>> if (err) >>>>> return err; >>>>> diff --git a/drivers/gpu/drm/xe/xe_pcode_api.h >>>>> b/drivers/gpu/drm/xe/xe_pcode_api.h >>>>> index 837ff7c71280..da4114bfaa7a 100644 >>>>> --- a/drivers/gpu/drm/xe/xe_pcode_api.h >>>>> +++ b/drivers/gpu/drm/xe/xe_pcode_api.h >>>>> @@ -30,6 +30,25 @@ >>>>> #define PCODE_READ_MIN_FREQ_TABLE 0x9 >>>>> #define PCODE_FREQ_RING_RATIO_SHIFT 16 >>>>> +#define XEHP_PCODE_FREQUENCY_CONFIG 0x6e /* >>>>> xehp, pvc */ >>>>> +/* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */ >>>>> +#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0 >>>>> +#define PCODE_MBOX_FC_SC_READ_FUSED_PN 0x1 >>>>> +/* PCODE_MBOX_DOMAIN_* - mailbox domain IDs */ >>>>> +/* XEHP_PCODE_FREQUENCY_CONFIG param2 */ >>>>> +#define PCODE_MBOX_DOMAIN_NONE 0x0 >>>>> +#define PCODE_MBOX_DOMAIN_GT 0x1 >>>>> +#define PCODE_MBOX_DOMAIN_HBM 0x2 >>>>> +#define PCODE_MBOX_DOMAIN_MEDIAFF 0x3 >>>>> +#define PCODE_MBOX_DOMAIN_MEDIA_SAMPLER 0x4 >>>>> +#define PCODE_MBOX_DOMAIN_SYSTOLIC_ARRAY 0x5 >>>>> +#define PCODE_MBOX_DOMAIN_CHIPLET 0x6 >>>>> +#define PCODE_MBOX_DOMAIN_BASE_CHIPLET_LINK 0x7 >>>>> +#define PCODE_MBOX_DOMAIN_BASE 0x8 >>>>> +#define PVC_PCODE_QOS_MULTIPLIER_SET 0x67 >>>>> +/* See PCODE_MBOX_DOMAIN_* - mailbox domain IDs - param1 and 2 */ >>>>> +#define PVC_PCODE_QOS_MULTIPLIER_GET 0x66 >>>>> + >>>>> /* PCODE Init */ >>>>> #define DGFX_PCODE_STATUS 0x7E >>>>> #define DGFX_GET_INIT_STATUS 0x0 >>>>> -- >>>>> 2.25.1 >>>>> ^ permalink raw reply [flat|nested] 17+ messages in thread
* [Intel-xe] [PATCH 3/3, v2] drm/xe: Sysfs entries to query vram fused min, max frequency 2023-09-01 12:15 [Intel-xe] [PATCH 0/3] Add some performance and frequency sysfs nodes Sujaritha Sundaresan ` (2 preceding siblings ...) 2023-09-01 12:15 ` [Intel-xe] [PATCH 2/3] drm/xe: Add base performance sysfs attributes Sujaritha Sundaresan @ 2023-09-01 12:15 ` Sujaritha Sundaresan 3 siblings, 0 replies; 17+ messages in thread From: Sujaritha Sundaresan @ 2023-09-01 12:15 UTC (permalink / raw) To: intel-xe; +Cc: Sujaritha Sundaresan Add sysfs enteries for vram rp0 and vram rpn frequencies v2: Fix review comments (Anshuman) Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> --- drivers/gpu/drm/xe/xe_guc_pc.c | 54 ++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/drivers/gpu/drm/xe/xe_guc_pc.c b/drivers/gpu/drm/xe/xe_guc_pc.c index 6a139d1dbf66..5084da83896b 100644 --- a/drivers/gpu/drm/xe/xe_guc_pc.c +++ b/drivers/gpu/drm/xe/xe_guc_pc.c @@ -752,6 +752,54 @@ static const struct attribute *pvc_perf_power_attrs[] = { NULL }; +static ssize_t freq_vram_rp0_show(struct device *dev, struct device_attribute *attr, + char *buff) +{ + struct kobject *kobj = &dev->kobj; + struct xe_gt *gt = kobj_to_gt(kobj); + u32 val; + int err; + + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, + PCODE_MBOX_FC_SC_READ_FUSED_P0, + PCODE_MBOX_DOMAIN_HBM, &val); + if (err) + return err; + + /* data_out - Fused P0 for domain ID in units of 50 MHz */ + val *= GT_FREQUENCY_MULTIPLIER; + + return sysfs_emit(buff, "%u\n", val); +} +static DEVICE_ATTR_RO(freq_vram_rp0); + +static ssize_t freq_vram_rpn_show(struct device *dev, struct device_attribute *attr, + char *buff) +{ + struct kobject *kobj = &dev->kobj; + struct xe_gt *gt = kobj_to_gt(kobj); + u32 val; + int err; + + err = xe_pcode_read_p(gt, XEHP_PCODE_FREQUENCY_CONFIG, + PCODE_MBOX_FC_SC_READ_FUSED_PN, + PCODE_MBOX_DOMAIN_HBM, &val); + if (err) + return err; + + /* data_out - Fused P0 for domain ID in units of 50 MHz */ + val *= GT_FREQUENCY_MULTIPLIER; + + return sysfs_emit(buff, "%u\n", val); +} +static DEVICE_ATTR_RO(freq_vram_rpn); + +static const struct attribute *vram_freq_attrs[] = { + &dev_attr_freq_vram_rp0.attr, + &dev_attr_freq_vram_rpn.attr, + NULL +}; + static void mtl_init_fused_rp_values(struct xe_guc_pc *pc) { struct xe_gt *gt = pc_to_gt(pc); @@ -1041,6 +1089,12 @@ int xe_guc_pc_init(struct xe_guc_pc *pc) return err; } + if (xe->info.platform == XE_PVC) { + err = sysfs_create_files(tile->sysfs, vram_freq_attrs); + if (err) + return err; + } + err = drmm_add_action_or_reset(&xe->drm, pc_fini, pc); if (err) return err; -- 2.25.1 ^ permalink raw reply related [flat|nested] 17+ messages in thread
end of thread, other threads:[~2023-09-26 17:39 UTC | newest] Thread overview: 17+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2023-09-01 12:15 [Intel-xe] [PATCH 0/3] Add some performance and frequency sysfs nodes Sujaritha Sundaresan 2023-09-01 12:08 ` [Intel-xe] ✗ CI.Patch_applied: failure for " Patchwork 2023-09-01 12:15 ` [Intel-xe] [PATCH 1/3] drm/xe: Add a couple of pcode helpers Sujaritha Sundaresan 2023-09-01 20:34 ` Rodrigo Vivi 2023-09-03 13:30 ` Sundaresan, Sujaritha 2023-09-12 5:08 ` Sundaresan, Sujaritha 2023-09-12 14:33 ` Rodrigo Vivi 2023-09-13 4:03 ` Sundaresan, Sujaritha 2023-09-25 8:13 ` Sundaresan, Sujaritha 2023-09-26 17:39 ` Rodrigo Vivi 2023-09-01 12:15 ` [Intel-xe] [PATCH 2/3] drm/xe: Add base performance sysfs attributes Sujaritha Sundaresan 2023-09-01 20:35 ` Rodrigo Vivi 2023-09-03 13:36 ` Sundaresan, Sujaritha 2023-09-12 8:48 ` Sundaresan, Sujaritha 2023-09-12 14:34 ` Rodrigo Vivi 2023-09-13 4:01 ` Sundaresan, Sujaritha 2023-09-01 12:15 ` [Intel-xe] [PATCH 3/3, v2] drm/xe: Sysfs entries to query vram fused min, max frequency Sujaritha Sundaresan
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.