* [REGRESSION][BISECTED] Early boot hangs since f0551af02130
@ 2024-07-15 13:11 Christian Heusel
2024-07-23 11:42 ` Christian Heusel
2024-07-23 12:02 ` Borislav Petkov
0 siblings, 2 replies; 24+ messages in thread
From: Christian Heusel @ 2024-07-15 13:11 UTC (permalink / raw)
To: Thomas Gleixner, Borislav Petkov, regressions; +Cc: x86, rob
[-- Attachment #1.1: Type: text/plain, Size: 1293 bytes --]
Hello Thomas, hello Borislav,
Rob reports a regression on his AMD Ryzen 3 1300X CPU that causes him
early boot failures when he does not specify "iommu=off" on the command
line.
We have bisected the issue together [in the Arch Linux bugtracker][0]
and landed on the following commit as the culprit of the failure:
f0551af02130 ("x86/topology: Ignore non-present APIC IDs in a present package")
We have also tried the latest mainline kernel (at the time) 6.10rc6 to
no avail, while 6.10rc7 with f0551af02130 reverted worked.
Rob is in CC and available for further debugging, but since we already
had an encounter on another bug report I tried to gather some
information which was relevant back then, which you can find attached to
this email:
- output of "cpuid"
- dmesg of a working boot
- output of "cat /sys/kernel/debug/x86/topo/cpus/*"
Reported-by: Rob Newcater <rob@durendal.co.uk>
Reported-by: Christian Heusel <christian@heusel.eu>
Cheers,
Chris
[0]: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/64
---
#regzbot link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/56
#regzbot introduced: f0551af02130
#regzbot title: x86/topology: Early boot failure unless "iommu=off" is set
[-- Attachment #1.2: cpuid.txt --]
[-- Type: text/plain, Size: 140628 bytes --]
CPU 0:
vendor_id = "AuthenticAMD"
version information (1/eax):
processor type = primary processor (0)
family = 0xf (15)
model = 0x1 (1)
stepping id = 0x1 (1)
extended family = 0x8 (8)
extended model = 0x0 (0)
(family synth) = 0x17 (23)
(model synth) = 0x1 (1)
miscellaneous (1/ebx):
process local APIC physical ID = 0x0 (0)
maximum IDs for CPUs in pkg = 0x4 (4)
CLFLUSH line size = 0x8 (8)
brand index = 0x0 (0)
brand id = 0x00 (0): unknown
feature information (1/edx):
x87 FPU on chip = true
VME: virtual-8086 mode enhancement = true
DE: debugging extensions = true
PSE: page size extensions = true
TSC: time stamp counter = true
RDMSR and WRMSR support = true
PAE: physical address extensions = true
MCE: machine check exception = true
CMPXCHG8B inst. = true
APIC on chip = true
SYSENTER and SYSEXIT = true
MTRR: memory type range registers = true
PTE global bit = true
MCA: machine check architecture = true
CMOV: conditional move/compare instr = true
PAT: page attribute table = true
PSE-36: page size extension = true
PSN: processor serial number = false
CLFLUSH instruction = true
DS: debug store = false
ACPI: thermal monitor and clock ctrl = false
MMX Technology = true
FXSAVE/FXRSTOR = true
SSE extensions = true
SSE2 extensions = true
SS: self snoop = false
hyper-threading / multi-core supported = true
TM: therm. monitor = false
IA64 = false
PBE: pending break event = false
feature information (1/ecx):
PNI/SSE3: Prescott New Instructions = true
PCLMULDQ instruction = true
DTES64: 64-bit debug store = false
MONITOR/MWAIT = true
CPL-qualified debug store = false
VMX: virtual machine extensions = false
SMX: safer mode extensions = false
Enhanced Intel SpeedStep Technology = false
TM2: thermal monitor 2 = false
SSSE3 extensions = true
context ID: adaptive or shared L1 data = false
SDBG: IA32_DEBUG_INTERFACE = false
FMA instruction = true
CMPXCHG16B instruction = true
xTPR disable = false
PDCM: perfmon and debug = false
PCID: process context identifiers = false
DCA: direct cache access = false
SSE4.1 extensions = true
SSE4.2 extensions = true
x2APIC: extended xAPIC support = false
MOVBE instruction = true
POPCNT instruction = true
time stamp counter deadline = false
AES instruction = true
XSAVE/XSTOR states = true
OS-enabled XSAVE/XSTOR = true
AVX: advanced vector extensions = true
F16C half-precision convert instruction = true
RDRAND instruction = true
hypervisor guest status = false
cache and TLB information (2):
processor serial number = 0080-0F11-0000-0000-0000-0000
deterministic cache parameters (4):
--- cache 0 ---
cache type = no more caches (0)
MONITOR/MWAIT (5):
smallest monitor-line size (bytes) = 0x40 (64)
largest monitor-line size (bytes) = 0x40 (64)
enum of Monitor-MWAIT exts supported = true
supports intrs as break-event for MWAIT = true
monitorless MWAIT supported = false
number of C0 sub C-states using MWAIT = 0x0 (0)
number of C1 sub C-states using MWAIT = 0x0 (0)
number of C2 sub C-states using MWAIT = 0x0 (0)
number of C3 sub C-states using MWAIT = 0x0 (0)
number of C4 sub C-states using MWAIT = 0x0 (0)
number of C5 sub C-states using MWAIT = 0x0 (0)
number of C6 sub C-states using MWAIT = 0x0 (0)
number of C7 sub C-states using MWAIT = 0x0 (0)
Thermal and Power Management Features (6):
digital thermometer = false
Intel Turbo Boost Technology = false
ARAT always running APIC timer = true
PLN power limit notification = false
ECMD extended clock modulation duty = false
PTM package thermal management = false
HWP base registers = false
HWP notification = false
HWP activity window = false
HWP energy performance preference = false
HWP package level request = false
HDC base registers = false
Intel Turbo Boost Max Technology 3.0 = false
HWP capabilities = false
HWP PECI override = false
flexible HWP = false
IA32_HWP_REQUEST MSR fast access mode = false
HW_FEEDBACK MSRs supported = false
ignoring idle logical processor HWP req = false
Thread Director = false
IA32_HW_FEEDBACK_THREAD_CONFIG bit 25 = false
digital thermometer thresholds = 0x0 (0)
hardware coordination feedback = true
ACNT2 available = false
performance-energy bias capability = false
number of enh hardware feedback classes = 0x0 (0)
performance capability reporting = false
energy efficiency capability reporting = false
size of feedback struct (4KB pages) = 0x1 (1)
index of CPU's row in feedback struct = 0x0 (0)
extended feature flags (7):
FSGSBASE instructions = true
IA32_TSC_ADJUST MSR supported = false
SGX: Software Guard Extensions supported = false
BMI1 instructions = true
HLE hardware lock elision = false
AVX2: advanced vector extensions 2 = true
FDP_EXCPTN_ONLY = false
SMEP supervisor mode exec protection = true
BMI2 instructions = true
enhanced REP MOVSB/STOSB = false
INVPCID instruction = false
RTM: restricted transactional memory = false
RDT-CMT/PQoS cache monitoring = false
deprecated FPU CS/DS = false
MPX: intel memory protection extensions = false
RDT-CAT/PQE cache allocation = false
AVX512F: AVX-512 foundation instructions = false
AVX512DQ: double & quadword instructions = false
RDSEED instruction = true
ADX instructions = true
SMAP: supervisor mode access prevention = true
AVX512IFMA: integer fused multiply add = false
PCOMMIT instruction = false
CLFLUSHOPT instruction = true
CLWB instruction = false
Intel processor trace = false
AVX512PF: prefetch instructions = false
AVX512ER: exponent & reciprocal instrs = false
AVX512CD: conflict detection instrs = false
SHA instructions = true
AVX512BW: byte & word instructions = false
AVX512VL: vector length = false
PREFETCHWT1 = false
AVX512VBMI: vector byte manipulation = false
UMIP: user-mode instruction prevention = false
PKU protection keys for user-mode = false
OSPKE CR4.PKE and RDPKRU/WRPKRU = false
WAITPKG instructions = false
AVX512_VBMI2: byte VPCOMPRESS, VPEXPAND = false
CET_SS: CET shadow stack = false
GFNI: Galois Field New Instructions = false
VAES instructions = false
VPCLMULQDQ instruction = false
AVX512_VNNI: neural network instructions = false
AVX512_BITALG: bit count/shiffle = false
TME: Total Memory Encryption = false
AVX512: VPOPCNTDQ instruction = false
LA57: 57-bit addrs & 5-level paging = false
BNDLDX/BNDSTX MAWAU value in 64-bit mode = 0x0 (0)
RDPID: read processor ID supported = false
KL: key locker = false
bus lock detection = false
CLDEMOTE supports cache line demote = false
MOVDIRI instruction = false
MOVDIR64B instruction = false
ENQCMD instruction = false
SGX_LC: SGX launch config supported = false
PKS: supervisor protection keys = false
SGX-KEYS: SGX attestation services = false
AVX512_4VNNIW: neural network instrs = false
AVX512_4FMAPS: multiply acc single prec = false
fast short REP MOV = false
UINTR: user interrupts = false
AVX512_VP2INTERSECT: intersect mask regs = false
IA32_MCU_OPT_CTRL SRBDS mitigation MSR = false
VERW MD_CLEAR microcode support = false
RTM transaction always aborts = false
IA32_TSX_FORCE_ABORT MSR = false
SERIALIZE instruction = false
hybrid part = false
TSXLDTRK: TSX suspend load addr tracking = false
PCONFIG instruction = false
LBR: architectural last branch records = false
CET_IBT: CET indirect branch tracking = false
AMX-BF16: tile bfloat16 support = false
AVX512_FP16: fp16 support = false
AMX-TILE: tile architecture support = false
AMX-INT8: tile 8-bit integer support = false
IBRS/IBPB: indirect branch restrictions = false
STIBP: 1 thr indirect branch predictor = false
L1D_FLUSH: IA32_FLUSH_CMD MSR = false
IA32_ARCH_CAPABILITIES MSR = false
IA32_CORE_CAPABILITIES MSR = false
SSBD: speculative store bypass disable = false
Direct Cache Access Parameters (9):
PLATFORM_DCA_CAP MSR bits = 0
Architecture Performance Monitoring Features (0xa):
version ID = 0x0 (0)
number of counters per logical processor = 0x0 (0)
bit width of counter = 0x0 (0)
length of EBX bit vector = 0x0 (0)
core cycle event = not available
instruction retired event = not available
reference cycles event = not available
last-level cache ref event = not available
last-level cache miss event = not available
branch inst retired event = not available
branch mispred retired event = not available
topdown slots event = not available
topdown backend bound = not available
topdown bad speculation = not available
topdown frontend bound = not available
topdown retiring = not available
LBR inserts = not available
fixed counter 0 supported = false
fixed counter 1 supported = false
fixed counter 2 supported = false
fixed counter 3 supported = false
fixed counter 4 supported = false
fixed counter 5 supported = false
fixed counter 6 supported = false
fixed counter 7 supported = false
fixed counter 8 supported = false
fixed counter 9 supported = false
fixed counter 10 supported = false
fixed counter 11 supported = false
fixed counter 12 supported = false
fixed counter 13 supported = false
fixed counter 14 supported = false
fixed counter 15 supported = false
fixed counter 16 supported = false
fixed counter 17 supported = false
fixed counter 18 supported = false
fixed counter 19 supported = false
fixed counter 20 supported = false
fixed counter 21 supported = false
fixed counter 22 supported = false
fixed counter 23 supported = false
fixed counter 24 supported = false
fixed counter 25 supported = false
fixed counter 26 supported = false
fixed counter 27 supported = false
fixed counter 28 supported = false
fixed counter 29 supported = false
fixed counter 30 supported = false
fixed counter 31 supported = false
number of contiguous fixed counters = 0x0 (0)
bit width of fixed counters = 0x0 (0)
anythread deprecation = false
x2APIC features / processor topology (0xb):
extended APIC ID = 0
--- level 0 ---
level number = 0x0 (0)
level type = invalid (0)
bit width of level & previous levels = 0x0 (0)
number of logical processors at level = 0x0 (0)
XSAVE features (0xd/0):
XCR0 valid bit field mask = 0x0000000000000007
x87 state = true
SSE state = true
AVX state = true
MPX BNDREGS = false
MPX BNDCSR = false
AVX-512 opmask = false
AVX-512 ZMM_Hi256 = false
AVX-512 Hi16_ZMM = false
PKRU state = false
XTILECFG state = false
XTILEDATA state = false
bytes required by fields in XCR0 = 0x00000340 (832)
bytes required by XSAVE/XRSTOR area = 0x00000340 (832)
XSAVEOPT instruction = true
XSAVEC instruction = true
XGETBV instruction = true
XSAVES/XRSTORS instructions = true
XFD: extended feature disable supported = false
SAVE area size in bytes = 0x00000340 (832)
IA32_XSS valid bit field mask = 0x0000000000000000
PT state = false
PASID state = false
CET_U user state = false
CET_S supervisor state = false
HDC state = false
UINTR state = false
LBR state = false
HWP state = false
AVX/YMM features (0xd/2):
AVX/YMM save state byte size = 0x00000100 (256)
AVX/YMM save state byte offset = 0x00000240 (576)
supported in IA32_XSS or XCR0 = XCR0 (user state)
64-byte alignment in compacted XSAVE = false
XFD faulting supported = false
extended processor signature (0x80000001/eax):
family/generation = 0xf (15)
model = 0x1 (1)
stepping id = 0x1 (1)
extended family = 0x8 (8)
extended model = 0x0 (0)
(family synth) = 0x17 (23)
(model synth) = 0x1 (1)
extended feature flags (0x80000001/edx):
x87 FPU on chip = true
virtual-8086 mode enhancement = true
debugging extensions = true
page size extensions = true
time stamp counter = true
RDMSR and WRMSR support = true
physical address extensions = true
machine check exception = true
CMPXCHG8B inst. = true
APIC on chip = true
SYSCALL and SYSRET instructions = true
memory type range registers = true
global paging extension = true
machine check architecture = true
conditional move/compare instruction = true
page attribute table = true
page size extension = true
multiprocessing capable = false
no-execute page protection = true
AMD multimedia instruction extensions = true
MMX Technology = true
FXSAVE/FXRSTOR = true
SSE extensions = true
1-GB large page support = true
RDTSCP = true
long mode (AA-64) = true
3DNow! instruction extensions = false
3DNow! instructions = false
extended brand id (0x80000001/ebx):
raw = 0x20000000 (536870912)
BrandId = 0x0 (0)
PkgType = AM4 (2)
AMD feature flags (0x80000001/ecx):
LAHF/SAHF supported in 64-bit mode = true
CMP Legacy = true
SVM: secure virtual machine = true
extended APIC space = true
AltMovCr8 = true
LZCNT advanced bit manipulation = true
SSE4A support = true
misaligned SSE mode = true
3DNow! PREFETCH/PREFETCHW instructions = true
OS visible workaround = true
instruction based sampling = false
XOP support = false
SKINIT/STGI support = true
watchdog timer support = true
lightweight profiling support = false
4-operand FMA instruction = false
TCE: translation cache extension = true
NodeId MSR C001100C = false
TBM support = false
topology extensions = true
core performance counter extensions = true
NB/DF performance counter extensions = true
data breakpoint extension = true
performance time-stamp counter support = false
LLC performance counter extensions = true
MWAITX/MONITORX supported = true
Address mask extension support = false
brand = "AMD Ryzen 3 1300X Quad-Core Processor "
L1 TLB/cache information: 2M/4M pages & L1 TLB (0x80000005/eax):
instruction # entries = 0x40 (64)
instruction associativity = 0xff (255)
data # entries = 0x40 (64)
data associativity = 0xff (255)
L1 TLB/cache information: 4K pages & L1 TLB (0x80000005/ebx):
instruction # entries = 0x40 (64)
instruction associativity = 0xff (255)
data # entries = 0x40 (64)
data associativity = 0xff (255)
L1 data cache information (0x80000005/ecx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 0x8 (8)
size (KB) = 0x20 (32)
L1 instruction cache information (0x80000005/edx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 0x4 (4)
size (KB) = 0x40 (64)
L2 TLB/cache information: 2M/4M pages & L2 TLB (0x80000006/eax):
instruction # entries = 0x400 (1024)
instruction associativity = 8 to 15-way (6)
data # entries = 0x600 (1536)
data associativity = 2-way (2)
L2 TLB/cache information: 4K pages & L2 TLB (0x80000006/ebx):
instruction # entries = 0x400 (1024)
instruction associativity = 8 to 15-way (6)
data # entries = 0x600 (1536)
data associativity = 8 to 15-way (6)
L2 unified cache information (0x80000006/ecx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 8 to 15-way (6)
size (KB) = 0x200 (512)
L3 cache information (0x80000006/edx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 16 to 31-way (8)
size (in 512KB units) = 0x10 (16)
RAS Capability (0x80000007/ebx):
MCA overflow recovery support = true
SUCCOR support = true
HWA: hardware assert support = false
scalable MCA support = true
Advanced Power Management Features (0x80000007/ecx):
CmpUnitPwrSampleTimeRatio = 0x0 (0)
Advanced Power Management Features (0x80000007/edx):
TS: temperature sensing diode = true
FID: frequency ID control = false
VID: voltage ID control = false
TTP: thermal trip = true
TM: thermal monitor = true
STC: software thermal control = false
100 MHz multiplier control = false
hardware P-State control = true
TscInvariant = true
CPB: core performance boost = false
read-only effective frequency interface = true
processor feedback interface = false
APM power reporting = false
connected standby = true
RAPL: running average power limit = true
Physical Address and Linear Address Size (0x80000008/eax):
maximum physical address bits = 0x30 (48)
maximum linear (virtual) address bits = 0x30 (48)
maximum guest physical address bits = 0x0 (0)
Extended Feature Extensions ID (0x80000008/ebx):
CLZERO instruction = true
instructions retired count support = true
always save/restore error pointers = true
INVLPGB instruction = false
RDPRU instruction = false
memory bandwidth enforcement = false
MCOMMIT instruction = false
WBNOINVD instruction = false
IBPB: indirect branch prediction barrier = true
interruptible WBINVD, WBNOINVD = false
IBRS: indirect branch restr speculation = false
STIBP: 1 thr indirect branch predictor = false
CPU prefers: IBRS always on = false
CPU prefers: STIBP always on = false
IBRS preferred over software solution = false
IBRS provides same mode protection = false
EFER[LMSLE] not supported = false
INVLPGB supports TLB flush guest nested = false
ppin processor id number supported = false
SSBD: speculative store bypass disable = false
virtualized SSBD = false
SSBD fixed in hardware = false
CPPC: collaborative processor perf ctrl = false
PSFD: predictive store forward disable = false
not vulnerable to branch type confusion = false
IBPB_RET: ret addr predictor cleared = false
branch sampling feature support = false
(vuln to branch type confusion synth) = true
Size Identifiers (0x80000008/ecx):
number of threads = 0x4 (4)
ApicIdCoreIdSize = 0x4 (4)
performance time-stamp counter size = 40 bits (0)
Feature Extended Size (0x80000008/edx):
max page count for INVLPGB instruction = 0x0 (0)
RDPRU instruction max input support = 0x0 (0)
SVM Secure Virtual Machine (0x8000000a/eax):
SvmRev: SVM revision = 0x1 (1)
SVM Secure Virtual Machine (0x8000000a/edx):
nested paging = true
LBR virtualization = true
SVM lock = true
NRIP save = true
MSR based TSC rate control = true
VMCB clean bits support = true
flush by ASID = true
decode assists = true
PMC virtualization = false
SSSE3/SSE5 opcode set disable = false
pause intercept filter = true
pause filter threshold = true
AVIC: AMD virtual interrupt controller = true
virtualized VMLOAD/VMSAVE = true
virtualized global interrupt flag (GIF) = true
GMET: guest mode execute trap = false
X2AVIC: virtualized X2APIC = false
supervisor shadow stack = false
guest Spec_ctl support = false
ROGPT: read-only guest page table = false
host MCE override = false
INVLPGB/TLBSYNC hyperv interc enable = false
VNMI: NMI virtualization = false
IBS virtualization = false
extended LVT AVIC access changes = false
guest VMCB addr check = false
bus lock threshold = false
idlt HLT intercept = false
NASID: number of address space identifiers = 0x8000 (32768):
L1 TLB information: 1G pages (0x80000019/eax):
instruction # entries = 0x40 (64)
instruction associativity = full (15)
data # entries = 0x40 (64)
data associativity = full (15)
L2 TLB information: 1G pages (0x80000019/ebx):
instruction # entries = 0x0 (0)
instruction associativity = L2 off (0)
data # entries = 0x0 (0)
data associativity = L2 off (0)
Performance Optimization Identifiers (0x8000001a/eax):
128-bit SSE executed full-width = true
MOVU* better than MOVL*/MOVH* = true
256-bit SSE executed full-width = false
Instruction Based Sampling Identifiers (0x8000001b/eax):
IBS feature flags valid = true
IBS fetch sampling = true
IBS execution sampling = true
read write of op counter = true
op counting mode = true
branch target address reporting = true
IbsOpCurCnt and IbsOpMaxCnt extend 7 = true
invalid RIP indication support = true
fused branch micro-op indication support = true
IBS fetch control extended MSR support = true
IBS op data 4 MSR support = false
IBS L3 miss filtering support = false
Lightweight Profiling Capabilities: Availability (0x8000001c/eax):
lightweight profiling = false
LWPVAL instruction = false
instruction retired event = false
branch retired event = false
DC miss event = false
core clocks not halted event = false
core reference clocks not halted event = false
continuous mode sampling = false
tsc in event record = false
interrupt on threshold overflow = false
Lightweight Profiling Capabilities: Supported (0x8000001c/edx):
lightweight profiling = false
LWPVAL instruction = false
instruction retired event = false
branch retired event = false
DC miss event = false
core clocks not halted event = false
core reference clocks not halted event = false
continuous mode sampling = false
tsc in event record = false
interrupt on threshold overflow = false
Lightweight Profiling Capabilities (0x8000001c/ebx):
LWPCB byte size = 0x0 (0)
event record byte size = 0x0 (0)
maximum EventId = 0x0 (0)
EventInterval1 field offset = 0x0 (0)
Lightweight Profiling Capabilities (0x8000001c/ecx):
latency counter bit size = 0x0 (0)
data cache miss address valid = false
amount cache latency is rounded = 0x0 (0)
LWP implementation version = 0x0 (0)
event ring buffer size in records = 0x0 (0)
branch prediction filtering = false
IP filtering = false
cache level filtering = false
cache latency filteing = false
Cache Properties (0x8000001d):
--- cache 0 ---
type = data (1)
level = 0x1 (1)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x8 (8)
number of sets = 64
write-back invalidate = false
cache inclusive of lower levels = false
(synth size) = 32768 (32 KB)
--- cache 1 ---
type = instruction (2)
level = 0x1 (1)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x4 (4)
number of sets = 256
write-back invalidate = false
cache inclusive of lower levels = false
(synth size) = 65536 (64 KB)
--- cache 2 ---
type = unified (3)
level = 0x2 (2)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x8 (8)
number of sets = 1024
write-back invalidate = false
cache inclusive of lower levels = true
(synth size) = 524288 (512 KB)
--- cache 3 ---
type = unified (3)
level = 0x3 (3)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x1 (1)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x10 (16)
number of sets = 4096
write-back invalidate = true
cache inclusive of lower levels = false
(synth size) = 4194304 (4 MB)
extended APIC ID = 0
Core Identifiers (0x8000001e/ebx):
core ID = 0x0 (0)
threads per core = 0x1 (1)
Node Identifiers (0x8000001e/ecx):
node ID = 0x0 (0)
nodes per processor = 0x1 (1)
AMD Secure Encryption (0x8000001f):
SME: secure memory encryption support = true
SEV: secure encrypted virtualize support = true
VM page flush MSR support = true
SEV-ES: SEV encrypted state support = false
SEV-SNP: SEV secure nested paging = false
VMPL: VM permission levels = false
RMPQUERY instruction support = false
VMPL supervisor shadow stack support = false
Secure TSC supported = false
virtual TSC_AUX supported = false
hardware cache coher across enc domains = false
SEV guest exec only from 64-bit host = false
restricted injection = false
alternate injection = false
full debug state swap for SEV-ES/SEV-SNP = false
disallowing IBS use by host = false
VTE: SEV virtual transparent encryption = false
VMGEXIT parameter support = false
virtual TOM MSR support = false
IBS virtual support for SEV-ES/SEV-SNP = false
PMC virtual support for SEV-ES/SEV-SNP = false
RMPREAD instruction = false
VMSA register protection support = false
SMT protection support = false
secure AVIC support = false
allowed SEV features support = false
SVSM communication page MSR support = false
VIRT_RMPUPDATE & VIRT_PSMASH MSR support = false
write to hypervisor in-used allowed = false
IBPB on entry support = false
encryption bit position in PTE = 0x2f (47)
physical address space width reduction = 0x5 (5)
number of VM permission levels = 0x0 (0)
number of SEV-enabled guests supported = 0xf (15)
minimum SEV guest ASID = 0x0 (0)
(instruction supported synth):
CMPXCHG8B = true
conditional move/compare = true
PREFETCH/PREFETCHW = true
(multi-processing synth) = multi-core (c=4)
(multi-processing method) = AMD leaf 1/0x8000008
(APIC widths synth): CORE_width=2 SMT_width=0
(APIC synth): PKG_ID=0 CORE_ID=0 SMT_ID=0
(uarch synth) = AMD Zen, 14nm
(synth) = AMD Ryzen 1000 (Summit Ridge ZP-B1) [Zen], 14nm
CPU 1:
vendor_id = "AuthenticAMD"
version information (1/eax):
processor type = primary processor (0)
family = 0xf (15)
model = 0x1 (1)
stepping id = 0x1 (1)
extended family = 0x8 (8)
extended model = 0x0 (0)
(family synth) = 0x17 (23)
(model synth) = 0x1 (1)
miscellaneous (1/ebx):
process local APIC physical ID = 0x1 (1)
maximum IDs for CPUs in pkg = 0x4 (4)
CLFLUSH line size = 0x8 (8)
brand index = 0x0 (0)
brand id = 0x00 (0): unknown
feature information (1/edx):
x87 FPU on chip = true
VME: virtual-8086 mode enhancement = true
DE: debugging extensions = true
PSE: page size extensions = true
TSC: time stamp counter = true
RDMSR and WRMSR support = true
PAE: physical address extensions = true
MCE: machine check exception = true
CMPXCHG8B inst. = true
APIC on chip = true
SYSENTER and SYSEXIT = true
MTRR: memory type range registers = true
PTE global bit = true
MCA: machine check architecture = true
CMOV: conditional move/compare instr = true
PAT: page attribute table = true
PSE-36: page size extension = true
PSN: processor serial number = false
CLFLUSH instruction = true
DS: debug store = false
ACPI: thermal monitor and clock ctrl = false
MMX Technology = true
FXSAVE/FXRSTOR = true
SSE extensions = true
SSE2 extensions = true
SS: self snoop = false
hyper-threading / multi-core supported = true
TM: therm. monitor = false
IA64 = false
PBE: pending break event = false
feature information (1/ecx):
PNI/SSE3: Prescott New Instructions = true
PCLMULDQ instruction = true
DTES64: 64-bit debug store = false
MONITOR/MWAIT = true
CPL-qualified debug store = false
VMX: virtual machine extensions = false
SMX: safer mode extensions = false
Enhanced Intel SpeedStep Technology = false
TM2: thermal monitor 2 = false
SSSE3 extensions = true
context ID: adaptive or shared L1 data = false
SDBG: IA32_DEBUG_INTERFACE = false
FMA instruction = true
CMPXCHG16B instruction = true
xTPR disable = false
PDCM: perfmon and debug = false
PCID: process context identifiers = false
DCA: direct cache access = false
SSE4.1 extensions = true
SSE4.2 extensions = true
x2APIC: extended xAPIC support = false
MOVBE instruction = true
POPCNT instruction = true
time stamp counter deadline = false
AES instruction = true
XSAVE/XSTOR states = true
OS-enabled XSAVE/XSTOR = true
AVX: advanced vector extensions = true
F16C half-precision convert instruction = true
RDRAND instruction = true
hypervisor guest status = false
cache and TLB information (2):
processor serial number = 0080-0F11-0000-0000-0000-0000
deterministic cache parameters (4):
--- cache 0 ---
cache type = no more caches (0)
MONITOR/MWAIT (5):
smallest monitor-line size (bytes) = 0x40 (64)
largest monitor-line size (bytes) = 0x40 (64)
enum of Monitor-MWAIT exts supported = true
supports intrs as break-event for MWAIT = true
monitorless MWAIT supported = false
number of C0 sub C-states using MWAIT = 0x0 (0)
number of C1 sub C-states using MWAIT = 0x0 (0)
number of C2 sub C-states using MWAIT = 0x0 (0)
number of C3 sub C-states using MWAIT = 0x0 (0)
number of C4 sub C-states using MWAIT = 0x0 (0)
number of C5 sub C-states using MWAIT = 0x0 (0)
number of C6 sub C-states using MWAIT = 0x0 (0)
number of C7 sub C-states using MWAIT = 0x0 (0)
Thermal and Power Management Features (6):
digital thermometer = false
Intel Turbo Boost Technology = false
ARAT always running APIC timer = true
PLN power limit notification = false
ECMD extended clock modulation duty = false
PTM package thermal management = false
HWP base registers = false
HWP notification = false
HWP activity window = false
HWP energy performance preference = false
HWP package level request = false
HDC base registers = false
Intel Turbo Boost Max Technology 3.0 = false
HWP capabilities = false
HWP PECI override = false
flexible HWP = false
IA32_HWP_REQUEST MSR fast access mode = false
HW_FEEDBACK MSRs supported = false
ignoring idle logical processor HWP req = false
Thread Director = false
IA32_HW_FEEDBACK_THREAD_CONFIG bit 25 = false
digital thermometer thresholds = 0x0 (0)
hardware coordination feedback = true
ACNT2 available = false
performance-energy bias capability = false
number of enh hardware feedback classes = 0x0 (0)
performance capability reporting = false
energy efficiency capability reporting = false
size of feedback struct (4KB pages) = 0x1 (1)
index of CPU's row in feedback struct = 0x0 (0)
extended feature flags (7):
FSGSBASE instructions = true
IA32_TSC_ADJUST MSR supported = false
SGX: Software Guard Extensions supported = false
BMI1 instructions = true
HLE hardware lock elision = false
AVX2: advanced vector extensions 2 = true
FDP_EXCPTN_ONLY = false
SMEP supervisor mode exec protection = true
BMI2 instructions = true
enhanced REP MOVSB/STOSB = false
INVPCID instruction = false
RTM: restricted transactional memory = false
RDT-CMT/PQoS cache monitoring = false
deprecated FPU CS/DS = false
MPX: intel memory protection extensions = false
RDT-CAT/PQE cache allocation = false
AVX512F: AVX-512 foundation instructions = false
AVX512DQ: double & quadword instructions = false
RDSEED instruction = true
ADX instructions = true
SMAP: supervisor mode access prevention = true
AVX512IFMA: integer fused multiply add = false
PCOMMIT instruction = false
CLFLUSHOPT instruction = true
CLWB instruction = false
Intel processor trace = false
AVX512PF: prefetch instructions = false
AVX512ER: exponent & reciprocal instrs = false
AVX512CD: conflict detection instrs = false
SHA instructions = true
AVX512BW: byte & word instructions = false
AVX512VL: vector length = false
PREFETCHWT1 = false
AVX512VBMI: vector byte manipulation = false
UMIP: user-mode instruction prevention = false
PKU protection keys for user-mode = false
OSPKE CR4.PKE and RDPKRU/WRPKRU = false
WAITPKG instructions = false
AVX512_VBMI2: byte VPCOMPRESS, VPEXPAND = false
CET_SS: CET shadow stack = false
GFNI: Galois Field New Instructions = false
VAES instructions = false
VPCLMULQDQ instruction = false
AVX512_VNNI: neural network instructions = false
AVX512_BITALG: bit count/shiffle = false
TME: Total Memory Encryption = false
AVX512: VPOPCNTDQ instruction = false
LA57: 57-bit addrs & 5-level paging = false
BNDLDX/BNDSTX MAWAU value in 64-bit mode = 0x0 (0)
RDPID: read processor ID supported = false
KL: key locker = false
bus lock detection = false
CLDEMOTE supports cache line demote = false
MOVDIRI instruction = false
MOVDIR64B instruction = false
ENQCMD instruction = false
SGX_LC: SGX launch config supported = false
PKS: supervisor protection keys = false
SGX-KEYS: SGX attestation services = false
AVX512_4VNNIW: neural network instrs = false
AVX512_4FMAPS: multiply acc single prec = false
fast short REP MOV = false
UINTR: user interrupts = false
AVX512_VP2INTERSECT: intersect mask regs = false
IA32_MCU_OPT_CTRL SRBDS mitigation MSR = false
VERW MD_CLEAR microcode support = false
RTM transaction always aborts = false
IA32_TSX_FORCE_ABORT MSR = false
SERIALIZE instruction = false
hybrid part = false
TSXLDTRK: TSX suspend load addr tracking = false
PCONFIG instruction = false
LBR: architectural last branch records = false
CET_IBT: CET indirect branch tracking = false
AMX-BF16: tile bfloat16 support = false
AVX512_FP16: fp16 support = false
AMX-TILE: tile architecture support = false
AMX-INT8: tile 8-bit integer support = false
IBRS/IBPB: indirect branch restrictions = false
STIBP: 1 thr indirect branch predictor = false
L1D_FLUSH: IA32_FLUSH_CMD MSR = false
IA32_ARCH_CAPABILITIES MSR = false
IA32_CORE_CAPABILITIES MSR = false
SSBD: speculative store bypass disable = false
Direct Cache Access Parameters (9):
PLATFORM_DCA_CAP MSR bits = 0
Architecture Performance Monitoring Features (0xa):
version ID = 0x0 (0)
number of counters per logical processor = 0x0 (0)
bit width of counter = 0x0 (0)
length of EBX bit vector = 0x0 (0)
core cycle event = not available
instruction retired event = not available
reference cycles event = not available
last-level cache ref event = not available
last-level cache miss event = not available
branch inst retired event = not available
branch mispred retired event = not available
topdown slots event = not available
topdown backend bound = not available
topdown bad speculation = not available
topdown frontend bound = not available
topdown retiring = not available
LBR inserts = not available
fixed counter 0 supported = false
fixed counter 1 supported = false
fixed counter 2 supported = false
fixed counter 3 supported = false
fixed counter 4 supported = false
fixed counter 5 supported = false
fixed counter 6 supported = false
fixed counter 7 supported = false
fixed counter 8 supported = false
fixed counter 9 supported = false
fixed counter 10 supported = false
fixed counter 11 supported = false
fixed counter 12 supported = false
fixed counter 13 supported = false
fixed counter 14 supported = false
fixed counter 15 supported = false
fixed counter 16 supported = false
fixed counter 17 supported = false
fixed counter 18 supported = false
fixed counter 19 supported = false
fixed counter 20 supported = false
fixed counter 21 supported = false
fixed counter 22 supported = false
fixed counter 23 supported = false
fixed counter 24 supported = false
fixed counter 25 supported = false
fixed counter 26 supported = false
fixed counter 27 supported = false
fixed counter 28 supported = false
fixed counter 29 supported = false
fixed counter 30 supported = false
fixed counter 31 supported = false
number of contiguous fixed counters = 0x0 (0)
bit width of fixed counters = 0x0 (0)
anythread deprecation = false
x2APIC features / processor topology (0xb):
extended APIC ID = 0
--- level 0 ---
level number = 0x0 (0)
level type = invalid (0)
bit width of level & previous levels = 0x0 (0)
number of logical processors at level = 0x0 (0)
XSAVE features (0xd/0):
XCR0 valid bit field mask = 0x0000000000000007
x87 state = true
SSE state = true
AVX state = true
MPX BNDREGS = false
MPX BNDCSR = false
AVX-512 opmask = false
AVX-512 ZMM_Hi256 = false
AVX-512 Hi16_ZMM = false
PKRU state = false
XTILECFG state = false
XTILEDATA state = false
bytes required by fields in XCR0 = 0x00000340 (832)
bytes required by XSAVE/XRSTOR area = 0x00000340 (832)
XSAVEOPT instruction = true
XSAVEC instruction = true
XGETBV instruction = true
XSAVES/XRSTORS instructions = true
XFD: extended feature disable supported = false
SAVE area size in bytes = 0x00000340 (832)
IA32_XSS valid bit field mask = 0x0000000000000000
PT state = false
PASID state = false
CET_U user state = false
CET_S supervisor state = false
HDC state = false
UINTR state = false
LBR state = false
HWP state = false
AVX/YMM features (0xd/2):
AVX/YMM save state byte size = 0x00000100 (256)
AVX/YMM save state byte offset = 0x00000240 (576)
supported in IA32_XSS or XCR0 = XCR0 (user state)
64-byte alignment in compacted XSAVE = false
XFD faulting supported = false
extended processor signature (0x80000001/eax):
family/generation = 0xf (15)
model = 0x1 (1)
stepping id = 0x1 (1)
extended family = 0x8 (8)
extended model = 0x0 (0)
(family synth) = 0x17 (23)
(model synth) = 0x1 (1)
extended feature flags (0x80000001/edx):
x87 FPU on chip = true
virtual-8086 mode enhancement = true
debugging extensions = true
page size extensions = true
time stamp counter = true
RDMSR and WRMSR support = true
physical address extensions = true
machine check exception = true
CMPXCHG8B inst. = true
APIC on chip = true
SYSCALL and SYSRET instructions = true
memory type range registers = true
global paging extension = true
machine check architecture = true
conditional move/compare instruction = true
page attribute table = true
page size extension = true
multiprocessing capable = false
no-execute page protection = true
AMD multimedia instruction extensions = true
MMX Technology = true
FXSAVE/FXRSTOR = true
SSE extensions = true
1-GB large page support = true
RDTSCP = true
long mode (AA-64) = true
3DNow! instruction extensions = false
3DNow! instructions = false
extended brand id (0x80000001/ebx):
raw = 0x20000000 (536870912)
BrandId = 0x0 (0)
PkgType = AM4 (2)
AMD feature flags (0x80000001/ecx):
LAHF/SAHF supported in 64-bit mode = true
CMP Legacy = true
SVM: secure virtual machine = true
extended APIC space = true
AltMovCr8 = true
LZCNT advanced bit manipulation = true
SSE4A support = true
misaligned SSE mode = true
3DNow! PREFETCH/PREFETCHW instructions = true
OS visible workaround = true
instruction based sampling = false
XOP support = false
SKINIT/STGI support = true
watchdog timer support = true
lightweight profiling support = false
4-operand FMA instruction = false
TCE: translation cache extension = true
NodeId MSR C001100C = false
TBM support = false
topology extensions = true
core performance counter extensions = true
NB/DF performance counter extensions = true
data breakpoint extension = true
performance time-stamp counter support = false
LLC performance counter extensions = true
MWAITX/MONITORX supported = true
Address mask extension support = false
brand = "AMD Ryzen 3 1300X Quad-Core Processor "
L1 TLB/cache information: 2M/4M pages & L1 TLB (0x80000005/eax):
instruction # entries = 0x40 (64)
instruction associativity = 0xff (255)
data # entries = 0x40 (64)
data associativity = 0xff (255)
L1 TLB/cache information: 4K pages & L1 TLB (0x80000005/ebx):
instruction # entries = 0x40 (64)
instruction associativity = 0xff (255)
data # entries = 0x40 (64)
data associativity = 0xff (255)
L1 data cache information (0x80000005/ecx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 0x8 (8)
size (KB) = 0x20 (32)
L1 instruction cache information (0x80000005/edx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 0x4 (4)
size (KB) = 0x40 (64)
L2 TLB/cache information: 2M/4M pages & L2 TLB (0x80000006/eax):
instruction # entries = 0x400 (1024)
instruction associativity = 8 to 15-way (6)
data # entries = 0x600 (1536)
data associativity = 2-way (2)
L2 TLB/cache information: 4K pages & L2 TLB (0x80000006/ebx):
instruction # entries = 0x400 (1024)
instruction associativity = 8 to 15-way (6)
data # entries = 0x600 (1536)
data associativity = 8 to 15-way (6)
L2 unified cache information (0x80000006/ecx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 8 to 15-way (6)
size (KB) = 0x200 (512)
L3 cache information (0x80000006/edx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 16 to 31-way (8)
size (in 512KB units) = 0x10 (16)
RAS Capability (0x80000007/ebx):
MCA overflow recovery support = true
SUCCOR support = true
HWA: hardware assert support = false
scalable MCA support = true
Advanced Power Management Features (0x80000007/ecx):
CmpUnitPwrSampleTimeRatio = 0x0 (0)
Advanced Power Management Features (0x80000007/edx):
TS: temperature sensing diode = true
FID: frequency ID control = false
VID: voltage ID control = false
TTP: thermal trip = true
TM: thermal monitor = true
STC: software thermal control = false
100 MHz multiplier control = false
hardware P-State control = true
TscInvariant = true
CPB: core performance boost = false
read-only effective frequency interface = true
processor feedback interface = false
APM power reporting = false
connected standby = true
RAPL: running average power limit = true
Physical Address and Linear Address Size (0x80000008/eax):
maximum physical address bits = 0x30 (48)
maximum linear (virtual) address bits = 0x30 (48)
maximum guest physical address bits = 0x0 (0)
Extended Feature Extensions ID (0x80000008/ebx):
CLZERO instruction = true
instructions retired count support = true
always save/restore error pointers = true
INVLPGB instruction = false
RDPRU instruction = false
memory bandwidth enforcement = false
MCOMMIT instruction = false
WBNOINVD instruction = false
IBPB: indirect branch prediction barrier = true
interruptible WBINVD, WBNOINVD = false
IBRS: indirect branch restr speculation = false
STIBP: 1 thr indirect branch predictor = false
CPU prefers: IBRS always on = false
CPU prefers: STIBP always on = false
IBRS preferred over software solution = false
IBRS provides same mode protection = false
EFER[LMSLE] not supported = false
INVLPGB supports TLB flush guest nested = false
ppin processor id number supported = false
SSBD: speculative store bypass disable = false
virtualized SSBD = false
SSBD fixed in hardware = false
CPPC: collaborative processor perf ctrl = false
PSFD: predictive store forward disable = false
not vulnerable to branch type confusion = false
IBPB_RET: ret addr predictor cleared = false
branch sampling feature support = false
(vuln to branch type confusion synth) = true
Size Identifiers (0x80000008/ecx):
number of threads = 0x4 (4)
ApicIdCoreIdSize = 0x4 (4)
performance time-stamp counter size = 40 bits (0)
Feature Extended Size (0x80000008/edx):
max page count for INVLPGB instruction = 0x0 (0)
RDPRU instruction max input support = 0x0 (0)
SVM Secure Virtual Machine (0x8000000a/eax):
SvmRev: SVM revision = 0x1 (1)
SVM Secure Virtual Machine (0x8000000a/edx):
nested paging = true
LBR virtualization = true
SVM lock = true
NRIP save = true
MSR based TSC rate control = true
VMCB clean bits support = true
flush by ASID = true
decode assists = true
PMC virtualization = false
SSSE3/SSE5 opcode set disable = false
pause intercept filter = true
pause filter threshold = true
AVIC: AMD virtual interrupt controller = true
virtualized VMLOAD/VMSAVE = true
virtualized global interrupt flag (GIF) = true
GMET: guest mode execute trap = false
X2AVIC: virtualized X2APIC = false
supervisor shadow stack = false
guest Spec_ctl support = false
ROGPT: read-only guest page table = false
host MCE override = false
INVLPGB/TLBSYNC hyperv interc enable = false
VNMI: NMI virtualization = false
IBS virtualization = false
extended LVT AVIC access changes = false
guest VMCB addr check = false
bus lock threshold = false
idlt HLT intercept = false
NASID: number of address space identifiers = 0x8000 (32768):
L1 TLB information: 1G pages (0x80000019/eax):
instruction # entries = 0x40 (64)
instruction associativity = full (15)
data # entries = 0x40 (64)
data associativity = full (15)
L2 TLB information: 1G pages (0x80000019/ebx):
instruction # entries = 0x0 (0)
instruction associativity = L2 off (0)
data # entries = 0x0 (0)
data associativity = L2 off (0)
Performance Optimization Identifiers (0x8000001a/eax):
128-bit SSE executed full-width = true
MOVU* better than MOVL*/MOVH* = true
256-bit SSE executed full-width = false
Instruction Based Sampling Identifiers (0x8000001b/eax):
IBS feature flags valid = true
IBS fetch sampling = true
IBS execution sampling = true
read write of op counter = true
op counting mode = true
branch target address reporting = true
IbsOpCurCnt and IbsOpMaxCnt extend 7 = true
invalid RIP indication support = true
fused branch micro-op indication support = true
IBS fetch control extended MSR support = true
IBS op data 4 MSR support = false
IBS L3 miss filtering support = false
Lightweight Profiling Capabilities: Availability (0x8000001c/eax):
lightweight profiling = false
LWPVAL instruction = false
instruction retired event = false
branch retired event = false
DC miss event = false
core clocks not halted event = false
core reference clocks not halted event = false
continuous mode sampling = false
tsc in event record = false
interrupt on threshold overflow = false
Lightweight Profiling Capabilities: Supported (0x8000001c/edx):
lightweight profiling = false
LWPVAL instruction = false
instruction retired event = false
branch retired event = false
DC miss event = false
core clocks not halted event = false
core reference clocks not halted event = false
continuous mode sampling = false
tsc in event record = false
interrupt on threshold overflow = false
Lightweight Profiling Capabilities (0x8000001c/ebx):
LWPCB byte size = 0x0 (0)
event record byte size = 0x0 (0)
maximum EventId = 0x0 (0)
EventInterval1 field offset = 0x0 (0)
Lightweight Profiling Capabilities (0x8000001c/ecx):
latency counter bit size = 0x0 (0)
data cache miss address valid = false
amount cache latency is rounded = 0x0 (0)
LWP implementation version = 0x0 (0)
event ring buffer size in records = 0x0 (0)
branch prediction filtering = false
IP filtering = false
cache level filtering = false
cache latency filteing = false
Cache Properties (0x8000001d):
--- cache 0 ---
type = data (1)
level = 0x1 (1)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x8 (8)
number of sets = 64
write-back invalidate = false
cache inclusive of lower levels = false
(synth size) = 32768 (32 KB)
--- cache 1 ---
type = instruction (2)
level = 0x1 (1)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x4 (4)
number of sets = 256
write-back invalidate = false
cache inclusive of lower levels = false
(synth size) = 65536 (64 KB)
--- cache 2 ---
type = unified (3)
level = 0x2 (2)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x8 (8)
number of sets = 1024
write-back invalidate = false
cache inclusive of lower levels = true
(synth size) = 524288 (512 KB)
--- cache 3 ---
type = unified (3)
level = 0x3 (3)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x1 (1)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x10 (16)
number of sets = 4096
write-back invalidate = true
cache inclusive of lower levels = false
(synth size) = 4194304 (4 MB)
extended APIC ID = 1
Core Identifiers (0x8000001e/ebx):
core ID = 0x1 (1)
threads per core = 0x1 (1)
Node Identifiers (0x8000001e/ecx):
node ID = 0x0 (0)
nodes per processor = 0x1 (1)
AMD Secure Encryption (0x8000001f):
SME: secure memory encryption support = true
SEV: secure encrypted virtualize support = true
VM page flush MSR support = true
SEV-ES: SEV encrypted state support = false
SEV-SNP: SEV secure nested paging = false
VMPL: VM permission levels = false
RMPQUERY instruction support = false
VMPL supervisor shadow stack support = false
Secure TSC supported = false
virtual TSC_AUX supported = false
hardware cache coher across enc domains = false
SEV guest exec only from 64-bit host = false
restricted injection = false
alternate injection = false
full debug state swap for SEV-ES/SEV-SNP = false
disallowing IBS use by host = false
VTE: SEV virtual transparent encryption = false
VMGEXIT parameter support = false
virtual TOM MSR support = false
IBS virtual support for SEV-ES/SEV-SNP = false
PMC virtual support for SEV-ES/SEV-SNP = false
RMPREAD instruction = false
VMSA register protection support = false
SMT protection support = false
secure AVIC support = false
allowed SEV features support = false
SVSM communication page MSR support = false
VIRT_RMPUPDATE & VIRT_PSMASH MSR support = false
write to hypervisor in-used allowed = false
IBPB on entry support = false
encryption bit position in PTE = 0x2f (47)
physical address space width reduction = 0x5 (5)
number of VM permission levels = 0x0 (0)
number of SEV-enabled guests supported = 0xf (15)
minimum SEV guest ASID = 0x0 (0)
(instruction supported synth):
CMPXCHG8B = true
conditional move/compare = true
PREFETCH/PREFETCHW = true
(multi-processing synth) = multi-core (c=4)
(multi-processing method) = AMD leaf 1/0x8000008
(APIC widths synth): CORE_width=2 SMT_width=0
(APIC synth): PKG_ID=0 CORE_ID=1 SMT_ID=0
(uarch synth) = AMD Zen, 14nm
(synth) = AMD Ryzen 1000 (Summit Ridge ZP-B1) [Zen], 14nm
CPU 2:
vendor_id = "AuthenticAMD"
version information (1/eax):
processor type = primary processor (0)
family = 0xf (15)
model = 0x1 (1)
stepping id = 0x1 (1)
extended family = 0x8 (8)
extended model = 0x0 (0)
(family synth) = 0x17 (23)
(model synth) = 0x1 (1)
miscellaneous (1/ebx):
process local APIC physical ID = 0x8 (8)
maximum IDs for CPUs in pkg = 0x4 (4)
CLFLUSH line size = 0x8 (8)
brand index = 0x0 (0)
brand id = 0x00 (0): unknown
feature information (1/edx):
x87 FPU on chip = true
VME: virtual-8086 mode enhancement = true
DE: debugging extensions = true
PSE: page size extensions = true
TSC: time stamp counter = true
RDMSR and WRMSR support = true
PAE: physical address extensions = true
MCE: machine check exception = true
CMPXCHG8B inst. = true
APIC on chip = true
SYSENTER and SYSEXIT = true
MTRR: memory type range registers = true
PTE global bit = true
MCA: machine check architecture = true
CMOV: conditional move/compare instr = true
PAT: page attribute table = true
PSE-36: page size extension = true
PSN: processor serial number = false
CLFLUSH instruction = true
DS: debug store = false
ACPI: thermal monitor and clock ctrl = false
MMX Technology = true
FXSAVE/FXRSTOR = true
SSE extensions = true
SSE2 extensions = true
SS: self snoop = false
hyper-threading / multi-core supported = true
TM: therm. monitor = false
IA64 = false
PBE: pending break event = false
feature information (1/ecx):
PNI/SSE3: Prescott New Instructions = true
PCLMULDQ instruction = true
DTES64: 64-bit debug store = false
MONITOR/MWAIT = true
CPL-qualified debug store = false
VMX: virtual machine extensions = false
SMX: safer mode extensions = false
Enhanced Intel SpeedStep Technology = false
TM2: thermal monitor 2 = false
SSSE3 extensions = true
context ID: adaptive or shared L1 data = false
SDBG: IA32_DEBUG_INTERFACE = false
FMA instruction = true
CMPXCHG16B instruction = true
xTPR disable = false
PDCM: perfmon and debug = false
PCID: process context identifiers = false
DCA: direct cache access = false
SSE4.1 extensions = true
SSE4.2 extensions = true
x2APIC: extended xAPIC support = false
MOVBE instruction = true
POPCNT instruction = true
time stamp counter deadline = false
AES instruction = true
XSAVE/XSTOR states = true
OS-enabled XSAVE/XSTOR = true
AVX: advanced vector extensions = true
F16C half-precision convert instruction = true
RDRAND instruction = true
hypervisor guest status = false
cache and TLB information (2):
processor serial number = 0080-0F11-0000-0000-0000-0000
deterministic cache parameters (4):
--- cache 0 ---
cache type = no more caches (0)
MONITOR/MWAIT (5):
smallest monitor-line size (bytes) = 0x40 (64)
largest monitor-line size (bytes) = 0x40 (64)
enum of Monitor-MWAIT exts supported = true
supports intrs as break-event for MWAIT = true
monitorless MWAIT supported = false
number of C0 sub C-states using MWAIT = 0x0 (0)
number of C1 sub C-states using MWAIT = 0x0 (0)
number of C2 sub C-states using MWAIT = 0x0 (0)
number of C3 sub C-states using MWAIT = 0x0 (0)
number of C4 sub C-states using MWAIT = 0x0 (0)
number of C5 sub C-states using MWAIT = 0x0 (0)
number of C6 sub C-states using MWAIT = 0x0 (0)
number of C7 sub C-states using MWAIT = 0x0 (0)
Thermal and Power Management Features (6):
digital thermometer = false
Intel Turbo Boost Technology = false
ARAT always running APIC timer = true
PLN power limit notification = false
ECMD extended clock modulation duty = false
PTM package thermal management = false
HWP base registers = false
HWP notification = false
HWP activity window = false
HWP energy performance preference = false
HWP package level request = false
HDC base registers = false
Intel Turbo Boost Max Technology 3.0 = false
HWP capabilities = false
HWP PECI override = false
flexible HWP = false
IA32_HWP_REQUEST MSR fast access mode = false
HW_FEEDBACK MSRs supported = false
ignoring idle logical processor HWP req = false
Thread Director = false
IA32_HW_FEEDBACK_THREAD_CONFIG bit 25 = false
digital thermometer thresholds = 0x0 (0)
hardware coordination feedback = true
ACNT2 available = false
performance-energy bias capability = false
number of enh hardware feedback classes = 0x0 (0)
performance capability reporting = false
energy efficiency capability reporting = false
size of feedback struct (4KB pages) = 0x1 (1)
index of CPU's row in feedback struct = 0x0 (0)
extended feature flags (7):
FSGSBASE instructions = true
IA32_TSC_ADJUST MSR supported = false
SGX: Software Guard Extensions supported = false
BMI1 instructions = true
HLE hardware lock elision = false
AVX2: advanced vector extensions 2 = true
FDP_EXCPTN_ONLY = false
SMEP supervisor mode exec protection = true
BMI2 instructions = true
enhanced REP MOVSB/STOSB = false
INVPCID instruction = false
RTM: restricted transactional memory = false
RDT-CMT/PQoS cache monitoring = false
deprecated FPU CS/DS = false
MPX: intel memory protection extensions = false
RDT-CAT/PQE cache allocation = false
AVX512F: AVX-512 foundation instructions = false
AVX512DQ: double & quadword instructions = false
RDSEED instruction = true
ADX instructions = true
SMAP: supervisor mode access prevention = true
AVX512IFMA: integer fused multiply add = false
PCOMMIT instruction = false
CLFLUSHOPT instruction = true
CLWB instruction = false
Intel processor trace = false
AVX512PF: prefetch instructions = false
AVX512ER: exponent & reciprocal instrs = false
AVX512CD: conflict detection instrs = false
SHA instructions = true
AVX512BW: byte & word instructions = false
AVX512VL: vector length = false
PREFETCHWT1 = false
AVX512VBMI: vector byte manipulation = false
UMIP: user-mode instruction prevention = false
PKU protection keys for user-mode = false
OSPKE CR4.PKE and RDPKRU/WRPKRU = false
WAITPKG instructions = false
AVX512_VBMI2: byte VPCOMPRESS, VPEXPAND = false
CET_SS: CET shadow stack = false
GFNI: Galois Field New Instructions = false
VAES instructions = false
VPCLMULQDQ instruction = false
AVX512_VNNI: neural network instructions = false
AVX512_BITALG: bit count/shiffle = false
TME: Total Memory Encryption = false
AVX512: VPOPCNTDQ instruction = false
LA57: 57-bit addrs & 5-level paging = false
BNDLDX/BNDSTX MAWAU value in 64-bit mode = 0x0 (0)
RDPID: read processor ID supported = false
KL: key locker = false
bus lock detection = false
CLDEMOTE supports cache line demote = false
MOVDIRI instruction = false
MOVDIR64B instruction = false
ENQCMD instruction = false
SGX_LC: SGX launch config supported = false
PKS: supervisor protection keys = false
SGX-KEYS: SGX attestation services = false
AVX512_4VNNIW: neural network instrs = false
AVX512_4FMAPS: multiply acc single prec = false
fast short REP MOV = false
UINTR: user interrupts = false
AVX512_VP2INTERSECT: intersect mask regs = false
IA32_MCU_OPT_CTRL SRBDS mitigation MSR = false
VERW MD_CLEAR microcode support = false
RTM transaction always aborts = false
IA32_TSX_FORCE_ABORT MSR = false
SERIALIZE instruction = false
hybrid part = false
TSXLDTRK: TSX suspend load addr tracking = false
PCONFIG instruction = false
LBR: architectural last branch records = false
CET_IBT: CET indirect branch tracking = false
AMX-BF16: tile bfloat16 support = false
AVX512_FP16: fp16 support = false
AMX-TILE: tile architecture support = false
AMX-INT8: tile 8-bit integer support = false
IBRS/IBPB: indirect branch restrictions = false
STIBP: 1 thr indirect branch predictor = false
L1D_FLUSH: IA32_FLUSH_CMD MSR = false
IA32_ARCH_CAPABILITIES MSR = false
IA32_CORE_CAPABILITIES MSR = false
SSBD: speculative store bypass disable = false
Direct Cache Access Parameters (9):
PLATFORM_DCA_CAP MSR bits = 0
Architecture Performance Monitoring Features (0xa):
version ID = 0x0 (0)
number of counters per logical processor = 0x0 (0)
bit width of counter = 0x0 (0)
length of EBX bit vector = 0x0 (0)
core cycle event = not available
instruction retired event = not available
reference cycles event = not available
last-level cache ref event = not available
last-level cache miss event = not available
branch inst retired event = not available
branch mispred retired event = not available
topdown slots event = not available
topdown backend bound = not available
topdown bad speculation = not available
topdown frontend bound = not available
topdown retiring = not available
LBR inserts = not available
fixed counter 0 supported = false
fixed counter 1 supported = false
fixed counter 2 supported = false
fixed counter 3 supported = false
fixed counter 4 supported = false
fixed counter 5 supported = false
fixed counter 6 supported = false
fixed counter 7 supported = false
fixed counter 8 supported = false
fixed counter 9 supported = false
fixed counter 10 supported = false
fixed counter 11 supported = false
fixed counter 12 supported = false
fixed counter 13 supported = false
fixed counter 14 supported = false
fixed counter 15 supported = false
fixed counter 16 supported = false
fixed counter 17 supported = false
fixed counter 18 supported = false
fixed counter 19 supported = false
fixed counter 20 supported = false
fixed counter 21 supported = false
fixed counter 22 supported = false
fixed counter 23 supported = false
fixed counter 24 supported = false
fixed counter 25 supported = false
fixed counter 26 supported = false
fixed counter 27 supported = false
fixed counter 28 supported = false
fixed counter 29 supported = false
fixed counter 30 supported = false
fixed counter 31 supported = false
number of contiguous fixed counters = 0x0 (0)
bit width of fixed counters = 0x0 (0)
anythread deprecation = false
x2APIC features / processor topology (0xb):
extended APIC ID = 0
--- level 0 ---
level number = 0x0 (0)
level type = invalid (0)
bit width of level & previous levels = 0x0 (0)
number of logical processors at level = 0x0 (0)
XSAVE features (0xd/0):
XCR0 valid bit field mask = 0x0000000000000007
x87 state = true
SSE state = true
AVX state = true
MPX BNDREGS = false
MPX BNDCSR = false
AVX-512 opmask = false
AVX-512 ZMM_Hi256 = false
AVX-512 Hi16_ZMM = false
PKRU state = false
XTILECFG state = false
XTILEDATA state = false
bytes required by fields in XCR0 = 0x00000340 (832)
bytes required by XSAVE/XRSTOR area = 0x00000340 (832)
XSAVEOPT instruction = true
XSAVEC instruction = true
XGETBV instruction = true
XSAVES/XRSTORS instructions = true
XFD: extended feature disable supported = false
SAVE area size in bytes = 0x00000340 (832)
IA32_XSS valid bit field mask = 0x0000000000000000
PT state = false
PASID state = false
CET_U user state = false
CET_S supervisor state = false
HDC state = false
UINTR state = false
LBR state = false
HWP state = false
AVX/YMM features (0xd/2):
AVX/YMM save state byte size = 0x00000100 (256)
AVX/YMM save state byte offset = 0x00000240 (576)
supported in IA32_XSS or XCR0 = XCR0 (user state)
64-byte alignment in compacted XSAVE = false
XFD faulting supported = false
extended processor signature (0x80000001/eax):
family/generation = 0xf (15)
model = 0x1 (1)
stepping id = 0x1 (1)
extended family = 0x8 (8)
extended model = 0x0 (0)
(family synth) = 0x17 (23)
(model synth) = 0x1 (1)
extended feature flags (0x80000001/edx):
x87 FPU on chip = true
virtual-8086 mode enhancement = true
debugging extensions = true
page size extensions = true
time stamp counter = true
RDMSR and WRMSR support = true
physical address extensions = true
machine check exception = true
CMPXCHG8B inst. = true
APIC on chip = true
SYSCALL and SYSRET instructions = true
memory type range registers = true
global paging extension = true
machine check architecture = true
conditional move/compare instruction = true
page attribute table = true
page size extension = true
multiprocessing capable = false
no-execute page protection = true
AMD multimedia instruction extensions = true
MMX Technology = true
FXSAVE/FXRSTOR = true
SSE extensions = true
1-GB large page support = true
RDTSCP = true
long mode (AA-64) = true
3DNow! instruction extensions = false
3DNow! instructions = false
extended brand id (0x80000001/ebx):
raw = 0x20000000 (536870912)
BrandId = 0x0 (0)
PkgType = AM4 (2)
AMD feature flags (0x80000001/ecx):
LAHF/SAHF supported in 64-bit mode = true
CMP Legacy = true
SVM: secure virtual machine = true
extended APIC space = true
AltMovCr8 = true
LZCNT advanced bit manipulation = true
SSE4A support = true
misaligned SSE mode = true
3DNow! PREFETCH/PREFETCHW instructions = true
OS visible workaround = true
instruction based sampling = false
XOP support = false
SKINIT/STGI support = true
watchdog timer support = true
lightweight profiling support = false
4-operand FMA instruction = false
TCE: translation cache extension = true
NodeId MSR C001100C = false
TBM support = false
topology extensions = true
core performance counter extensions = true
NB/DF performance counter extensions = true
data breakpoint extension = true
performance time-stamp counter support = false
LLC performance counter extensions = true
MWAITX/MONITORX supported = true
Address mask extension support = false
brand = "AMD Ryzen 3 1300X Quad-Core Processor "
L1 TLB/cache information: 2M/4M pages & L1 TLB (0x80000005/eax):
instruction # entries = 0x40 (64)
instruction associativity = 0xff (255)
data # entries = 0x40 (64)
data associativity = 0xff (255)
L1 TLB/cache information: 4K pages & L1 TLB (0x80000005/ebx):
instruction # entries = 0x40 (64)
instruction associativity = 0xff (255)
data # entries = 0x40 (64)
data associativity = 0xff (255)
L1 data cache information (0x80000005/ecx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 0x8 (8)
size (KB) = 0x20 (32)
L1 instruction cache information (0x80000005/edx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 0x4 (4)
size (KB) = 0x40 (64)
L2 TLB/cache information: 2M/4M pages & L2 TLB (0x80000006/eax):
instruction # entries = 0x400 (1024)
instruction associativity = 8 to 15-way (6)
data # entries = 0x600 (1536)
data associativity = 2-way (2)
L2 TLB/cache information: 4K pages & L2 TLB (0x80000006/ebx):
instruction # entries = 0x400 (1024)
instruction associativity = 8 to 15-way (6)
data # entries = 0x600 (1536)
data associativity = 8 to 15-way (6)
L2 unified cache information (0x80000006/ecx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 8 to 15-way (6)
size (KB) = 0x200 (512)
L3 cache information (0x80000006/edx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 16 to 31-way (8)
size (in 512KB units) = 0x10 (16)
RAS Capability (0x80000007/ebx):
MCA overflow recovery support = true
SUCCOR support = true
HWA: hardware assert support = false
scalable MCA support = true
Advanced Power Management Features (0x80000007/ecx):
CmpUnitPwrSampleTimeRatio = 0x0 (0)
Advanced Power Management Features (0x80000007/edx):
TS: temperature sensing diode = true
FID: frequency ID control = false
VID: voltage ID control = false
TTP: thermal trip = true
TM: thermal monitor = true
STC: software thermal control = false
100 MHz multiplier control = false
hardware P-State control = true
TscInvariant = true
CPB: core performance boost = false
read-only effective frequency interface = true
processor feedback interface = false
APM power reporting = false
connected standby = true
RAPL: running average power limit = true
Physical Address and Linear Address Size (0x80000008/eax):
maximum physical address bits = 0x30 (48)
maximum linear (virtual) address bits = 0x30 (48)
maximum guest physical address bits = 0x0 (0)
Extended Feature Extensions ID (0x80000008/ebx):
CLZERO instruction = true
instructions retired count support = true
always save/restore error pointers = true
INVLPGB instruction = false
RDPRU instruction = false
memory bandwidth enforcement = false
MCOMMIT instruction = false
WBNOINVD instruction = false
IBPB: indirect branch prediction barrier = true
interruptible WBINVD, WBNOINVD = false
IBRS: indirect branch restr speculation = false
STIBP: 1 thr indirect branch predictor = false
CPU prefers: IBRS always on = false
CPU prefers: STIBP always on = false
IBRS preferred over software solution = false
IBRS provides same mode protection = false
EFER[LMSLE] not supported = false
INVLPGB supports TLB flush guest nested = false
ppin processor id number supported = false
SSBD: speculative store bypass disable = false
virtualized SSBD = false
SSBD fixed in hardware = false
CPPC: collaborative processor perf ctrl = false
PSFD: predictive store forward disable = false
not vulnerable to branch type confusion = false
IBPB_RET: ret addr predictor cleared = false
branch sampling feature support = false
(vuln to branch type confusion synth) = true
Size Identifiers (0x80000008/ecx):
number of threads = 0x4 (4)
ApicIdCoreIdSize = 0x4 (4)
performance time-stamp counter size = 40 bits (0)
Feature Extended Size (0x80000008/edx):
max page count for INVLPGB instruction = 0x0 (0)
RDPRU instruction max input support = 0x0 (0)
SVM Secure Virtual Machine (0x8000000a/eax):
SvmRev: SVM revision = 0x1 (1)
SVM Secure Virtual Machine (0x8000000a/edx):
nested paging = true
LBR virtualization = true
SVM lock = true
NRIP save = true
MSR based TSC rate control = true
VMCB clean bits support = true
flush by ASID = true
decode assists = true
PMC virtualization = false
SSSE3/SSE5 opcode set disable = false
pause intercept filter = true
pause filter threshold = true
AVIC: AMD virtual interrupt controller = true
virtualized VMLOAD/VMSAVE = true
virtualized global interrupt flag (GIF) = true
GMET: guest mode execute trap = false
X2AVIC: virtualized X2APIC = false
supervisor shadow stack = false
guest Spec_ctl support = false
ROGPT: read-only guest page table = false
host MCE override = false
INVLPGB/TLBSYNC hyperv interc enable = false
VNMI: NMI virtualization = false
IBS virtualization = false
extended LVT AVIC access changes = false
guest VMCB addr check = false
bus lock threshold = false
idlt HLT intercept = false
NASID: number of address space identifiers = 0x8000 (32768):
L1 TLB information: 1G pages (0x80000019/eax):
instruction # entries = 0x40 (64)
instruction associativity = full (15)
data # entries = 0x40 (64)
data associativity = full (15)
L2 TLB information: 1G pages (0x80000019/ebx):
instruction # entries = 0x0 (0)
instruction associativity = L2 off (0)
data # entries = 0x0 (0)
data associativity = L2 off (0)
Performance Optimization Identifiers (0x8000001a/eax):
128-bit SSE executed full-width = true
MOVU* better than MOVL*/MOVH* = true
256-bit SSE executed full-width = false
Instruction Based Sampling Identifiers (0x8000001b/eax):
IBS feature flags valid = true
IBS fetch sampling = true
IBS execution sampling = true
read write of op counter = true
op counting mode = true
branch target address reporting = true
IbsOpCurCnt and IbsOpMaxCnt extend 7 = true
invalid RIP indication support = true
fused branch micro-op indication support = true
IBS fetch control extended MSR support = true
IBS op data 4 MSR support = false
IBS L3 miss filtering support = false
Lightweight Profiling Capabilities: Availability (0x8000001c/eax):
lightweight profiling = false
LWPVAL instruction = false
instruction retired event = false
branch retired event = false
DC miss event = false
core clocks not halted event = false
core reference clocks not halted event = false
continuous mode sampling = false
tsc in event record = false
interrupt on threshold overflow = false
Lightweight Profiling Capabilities: Supported (0x8000001c/edx):
lightweight profiling = false
LWPVAL instruction = false
instruction retired event = false
branch retired event = false
DC miss event = false
core clocks not halted event = false
core reference clocks not halted event = false
continuous mode sampling = false
tsc in event record = false
interrupt on threshold overflow = false
Lightweight Profiling Capabilities (0x8000001c/ebx):
LWPCB byte size = 0x0 (0)
event record byte size = 0x0 (0)
maximum EventId = 0x0 (0)
EventInterval1 field offset = 0x0 (0)
Lightweight Profiling Capabilities (0x8000001c/ecx):
latency counter bit size = 0x0 (0)
data cache miss address valid = false
amount cache latency is rounded = 0x0 (0)
LWP implementation version = 0x0 (0)
event ring buffer size in records = 0x0 (0)
branch prediction filtering = false
IP filtering = false
cache level filtering = false
cache latency filteing = false
Cache Properties (0x8000001d):
--- cache 0 ---
type = data (1)
level = 0x1 (1)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x8 (8)
number of sets = 64
write-back invalidate = false
cache inclusive of lower levels = false
(synth size) = 32768 (32 KB)
--- cache 1 ---
type = instruction (2)
level = 0x1 (1)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x4 (4)
number of sets = 256
write-back invalidate = false
cache inclusive of lower levels = false
(synth size) = 65536 (64 KB)
--- cache 2 ---
type = unified (3)
level = 0x2 (2)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x8 (8)
number of sets = 1024
write-back invalidate = false
cache inclusive of lower levels = true
(synth size) = 524288 (512 KB)
--- cache 3 ---
type = unified (3)
level = 0x3 (3)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x1 (1)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x10 (16)
number of sets = 4096
write-back invalidate = true
cache inclusive of lower levels = false
(synth size) = 4194304 (4 MB)
extended APIC ID = 8
Core Identifiers (0x8000001e/ebx):
core ID = 0x8 (8)
threads per core = 0x1 (1)
Node Identifiers (0x8000001e/ecx):
node ID = 0x0 (0)
nodes per processor = 0x1 (1)
AMD Secure Encryption (0x8000001f):
SME: secure memory encryption support = true
SEV: secure encrypted virtualize support = true
VM page flush MSR support = true
SEV-ES: SEV encrypted state support = false
SEV-SNP: SEV secure nested paging = false
VMPL: VM permission levels = false
RMPQUERY instruction support = false
VMPL supervisor shadow stack support = false
Secure TSC supported = false
virtual TSC_AUX supported = false
hardware cache coher across enc domains = false
SEV guest exec only from 64-bit host = false
restricted injection = false
alternate injection = false
full debug state swap for SEV-ES/SEV-SNP = false
disallowing IBS use by host = false
VTE: SEV virtual transparent encryption = false
VMGEXIT parameter support = false
virtual TOM MSR support = false
IBS virtual support for SEV-ES/SEV-SNP = false
PMC virtual support for SEV-ES/SEV-SNP = false
RMPREAD instruction = false
VMSA register protection support = false
SMT protection support = false
secure AVIC support = false
allowed SEV features support = false
SVSM communication page MSR support = false
VIRT_RMPUPDATE & VIRT_PSMASH MSR support = false
write to hypervisor in-used allowed = false
IBPB on entry support = false
encryption bit position in PTE = 0x2f (47)
physical address space width reduction = 0x5 (5)
number of VM permission levels = 0x0 (0)
number of SEV-enabled guests supported = 0xf (15)
minimum SEV guest ASID = 0x0 (0)
(instruction supported synth):
CMPXCHG8B = true
conditional move/compare = true
PREFETCH/PREFETCHW = true
(multi-processing synth) = multi-core (c=4)
(multi-processing method) = AMD leaf 1/0x8000008
(APIC widths synth): CORE_width=2 SMT_width=0
(APIC synth): PKG_ID=2 CORE_ID=0 SMT_ID=0
(uarch synth) = AMD Zen, 14nm
(synth) = AMD Ryzen 1000 (Summit Ridge ZP-B1) [Zen], 14nm
CPU 3:
vendor_id = "AuthenticAMD"
version information (1/eax):
processor type = primary processor (0)
family = 0xf (15)
model = 0x1 (1)
stepping id = 0x1 (1)
extended family = 0x8 (8)
extended model = 0x0 (0)
(family synth) = 0x17 (23)
(model synth) = 0x1 (1)
miscellaneous (1/ebx):
process local APIC physical ID = 0x9 (9)
maximum IDs for CPUs in pkg = 0x4 (4)
CLFLUSH line size = 0x8 (8)
brand index = 0x0 (0)
brand id = 0x00 (0): unknown
feature information (1/edx):
x87 FPU on chip = true
VME: virtual-8086 mode enhancement = true
DE: debugging extensions = true
PSE: page size extensions = true
TSC: time stamp counter = true
RDMSR and WRMSR support = true
PAE: physical address extensions = true
MCE: machine check exception = true
CMPXCHG8B inst. = true
APIC on chip = true
SYSENTER and SYSEXIT = true
MTRR: memory type range registers = true
PTE global bit = true
MCA: machine check architecture = true
CMOV: conditional move/compare instr = true
PAT: page attribute table = true
PSE-36: page size extension = true
PSN: processor serial number = false
CLFLUSH instruction = true
DS: debug store = false
ACPI: thermal monitor and clock ctrl = false
MMX Technology = true
FXSAVE/FXRSTOR = true
SSE extensions = true
SSE2 extensions = true
SS: self snoop = false
hyper-threading / multi-core supported = true
TM: therm. monitor = false
IA64 = false
PBE: pending break event = false
feature information (1/ecx):
PNI/SSE3: Prescott New Instructions = true
PCLMULDQ instruction = true
DTES64: 64-bit debug store = false
MONITOR/MWAIT = true
CPL-qualified debug store = false
VMX: virtual machine extensions = false
SMX: safer mode extensions = false
Enhanced Intel SpeedStep Technology = false
TM2: thermal monitor 2 = false
SSSE3 extensions = true
context ID: adaptive or shared L1 data = false
SDBG: IA32_DEBUG_INTERFACE = false
FMA instruction = true
CMPXCHG16B instruction = true
xTPR disable = false
PDCM: perfmon and debug = false
PCID: process context identifiers = false
DCA: direct cache access = false
SSE4.1 extensions = true
SSE4.2 extensions = true
x2APIC: extended xAPIC support = false
MOVBE instruction = true
POPCNT instruction = true
time stamp counter deadline = false
AES instruction = true
XSAVE/XSTOR states = true
OS-enabled XSAVE/XSTOR = true
AVX: advanced vector extensions = true
F16C half-precision convert instruction = true
RDRAND instruction = true
hypervisor guest status = false
cache and TLB information (2):
processor serial number = 0080-0F11-0000-0000-0000-0000
deterministic cache parameters (4):
--- cache 0 ---
cache type = no more caches (0)
MONITOR/MWAIT (5):
smallest monitor-line size (bytes) = 0x40 (64)
largest monitor-line size (bytes) = 0x40 (64)
enum of Monitor-MWAIT exts supported = true
supports intrs as break-event for MWAIT = true
monitorless MWAIT supported = false
number of C0 sub C-states using MWAIT = 0x0 (0)
number of C1 sub C-states using MWAIT = 0x0 (0)
number of C2 sub C-states using MWAIT = 0x0 (0)
number of C3 sub C-states using MWAIT = 0x0 (0)
number of C4 sub C-states using MWAIT = 0x0 (0)
number of C5 sub C-states using MWAIT = 0x0 (0)
number of C6 sub C-states using MWAIT = 0x0 (0)
number of C7 sub C-states using MWAIT = 0x0 (0)
Thermal and Power Management Features (6):
digital thermometer = false
Intel Turbo Boost Technology = false
ARAT always running APIC timer = true
PLN power limit notification = false
ECMD extended clock modulation duty = false
PTM package thermal management = false
HWP base registers = false
HWP notification = false
HWP activity window = false
HWP energy performance preference = false
HWP package level request = false
HDC base registers = false
Intel Turbo Boost Max Technology 3.0 = false
HWP capabilities = false
HWP PECI override = false
flexible HWP = false
IA32_HWP_REQUEST MSR fast access mode = false
HW_FEEDBACK MSRs supported = false
ignoring idle logical processor HWP req = false
Thread Director = false
IA32_HW_FEEDBACK_THREAD_CONFIG bit 25 = false
digital thermometer thresholds = 0x0 (0)
hardware coordination feedback = true
ACNT2 available = false
performance-energy bias capability = false
number of enh hardware feedback classes = 0x0 (0)
performance capability reporting = false
energy efficiency capability reporting = false
size of feedback struct (4KB pages) = 0x1 (1)
index of CPU's row in feedback struct = 0x0 (0)
extended feature flags (7):
FSGSBASE instructions = true
IA32_TSC_ADJUST MSR supported = false
SGX: Software Guard Extensions supported = false
BMI1 instructions = true
HLE hardware lock elision = false
AVX2: advanced vector extensions 2 = true
FDP_EXCPTN_ONLY = false
SMEP supervisor mode exec protection = true
BMI2 instructions = true
enhanced REP MOVSB/STOSB = false
INVPCID instruction = false
RTM: restricted transactional memory = false
RDT-CMT/PQoS cache monitoring = false
deprecated FPU CS/DS = false
MPX: intel memory protection extensions = false
RDT-CAT/PQE cache allocation = false
AVX512F: AVX-512 foundation instructions = false
AVX512DQ: double & quadword instructions = false
RDSEED instruction = true
ADX instructions = true
SMAP: supervisor mode access prevention = true
AVX512IFMA: integer fused multiply add = false
PCOMMIT instruction = false
CLFLUSHOPT instruction = true
CLWB instruction = false
Intel processor trace = false
AVX512PF: prefetch instructions = false
AVX512ER: exponent & reciprocal instrs = false
AVX512CD: conflict detection instrs = false
SHA instructions = true
AVX512BW: byte & word instructions = false
AVX512VL: vector length = false
PREFETCHWT1 = false
AVX512VBMI: vector byte manipulation = false
UMIP: user-mode instruction prevention = false
PKU protection keys for user-mode = false
OSPKE CR4.PKE and RDPKRU/WRPKRU = false
WAITPKG instructions = false
AVX512_VBMI2: byte VPCOMPRESS, VPEXPAND = false
CET_SS: CET shadow stack = false
GFNI: Galois Field New Instructions = false
VAES instructions = false
VPCLMULQDQ instruction = false
AVX512_VNNI: neural network instructions = false
AVX512_BITALG: bit count/shiffle = false
TME: Total Memory Encryption = false
AVX512: VPOPCNTDQ instruction = false
LA57: 57-bit addrs & 5-level paging = false
BNDLDX/BNDSTX MAWAU value in 64-bit mode = 0x0 (0)
RDPID: read processor ID supported = false
KL: key locker = false
bus lock detection = false
CLDEMOTE supports cache line demote = false
MOVDIRI instruction = false
MOVDIR64B instruction = false
ENQCMD instruction = false
SGX_LC: SGX launch config supported = false
PKS: supervisor protection keys = false
SGX-KEYS: SGX attestation services = false
AVX512_4VNNIW: neural network instrs = false
AVX512_4FMAPS: multiply acc single prec = false
fast short REP MOV = false
UINTR: user interrupts = false
AVX512_VP2INTERSECT: intersect mask regs = false
IA32_MCU_OPT_CTRL SRBDS mitigation MSR = false
VERW MD_CLEAR microcode support = false
RTM transaction always aborts = false
IA32_TSX_FORCE_ABORT MSR = false
SERIALIZE instruction = false
hybrid part = false
TSXLDTRK: TSX suspend load addr tracking = false
PCONFIG instruction = false
LBR: architectural last branch records = false
CET_IBT: CET indirect branch tracking = false
AMX-BF16: tile bfloat16 support = false
AVX512_FP16: fp16 support = false
AMX-TILE: tile architecture support = false
AMX-INT8: tile 8-bit integer support = false
IBRS/IBPB: indirect branch restrictions = false
STIBP: 1 thr indirect branch predictor = false
L1D_FLUSH: IA32_FLUSH_CMD MSR = false
IA32_ARCH_CAPABILITIES MSR = false
IA32_CORE_CAPABILITIES MSR = false
SSBD: speculative store bypass disable = false
Direct Cache Access Parameters (9):
PLATFORM_DCA_CAP MSR bits = 0
Architecture Performance Monitoring Features (0xa):
version ID = 0x0 (0)
number of counters per logical processor = 0x0 (0)
bit width of counter = 0x0 (0)
length of EBX bit vector = 0x0 (0)
core cycle event = not available
instruction retired event = not available
reference cycles event = not available
last-level cache ref event = not available
last-level cache miss event = not available
branch inst retired event = not available
branch mispred retired event = not available
topdown slots event = not available
topdown backend bound = not available
topdown bad speculation = not available
topdown frontend bound = not available
topdown retiring = not available
LBR inserts = not available
fixed counter 0 supported = false
fixed counter 1 supported = false
fixed counter 2 supported = false
fixed counter 3 supported = false
fixed counter 4 supported = false
fixed counter 5 supported = false
fixed counter 6 supported = false
fixed counter 7 supported = false
fixed counter 8 supported = false
fixed counter 9 supported = false
fixed counter 10 supported = false
fixed counter 11 supported = false
fixed counter 12 supported = false
fixed counter 13 supported = false
fixed counter 14 supported = false
fixed counter 15 supported = false
fixed counter 16 supported = false
fixed counter 17 supported = false
fixed counter 18 supported = false
fixed counter 19 supported = false
fixed counter 20 supported = false
fixed counter 21 supported = false
fixed counter 22 supported = false
fixed counter 23 supported = false
fixed counter 24 supported = false
fixed counter 25 supported = false
fixed counter 26 supported = false
fixed counter 27 supported = false
fixed counter 28 supported = false
fixed counter 29 supported = false
fixed counter 30 supported = false
fixed counter 31 supported = false
number of contiguous fixed counters = 0x0 (0)
bit width of fixed counters = 0x0 (0)
anythread deprecation = false
x2APIC features / processor topology (0xb):
extended APIC ID = 0
--- level 0 ---
level number = 0x0 (0)
level type = invalid (0)
bit width of level & previous levels = 0x0 (0)
number of logical processors at level = 0x0 (0)
XSAVE features (0xd/0):
XCR0 valid bit field mask = 0x0000000000000007
x87 state = true
SSE state = true
AVX state = true
MPX BNDREGS = false
MPX BNDCSR = false
AVX-512 opmask = false
AVX-512 ZMM_Hi256 = false
AVX-512 Hi16_ZMM = false
PKRU state = false
XTILECFG state = false
XTILEDATA state = false
bytes required by fields in XCR0 = 0x00000340 (832)
bytes required by XSAVE/XRSTOR area = 0x00000340 (832)
XSAVEOPT instruction = true
XSAVEC instruction = true
XGETBV instruction = true
XSAVES/XRSTORS instructions = true
XFD: extended feature disable supported = false
SAVE area size in bytes = 0x00000340 (832)
IA32_XSS valid bit field mask = 0x0000000000000000
PT state = false
PASID state = false
CET_U user state = false
CET_S supervisor state = false
HDC state = false
UINTR state = false
LBR state = false
HWP state = false
AVX/YMM features (0xd/2):
AVX/YMM save state byte size = 0x00000100 (256)
AVX/YMM save state byte offset = 0x00000240 (576)
supported in IA32_XSS or XCR0 = XCR0 (user state)
64-byte alignment in compacted XSAVE = false
XFD faulting supported = false
extended processor signature (0x80000001/eax):
family/generation = 0xf (15)
model = 0x1 (1)
stepping id = 0x1 (1)
extended family = 0x8 (8)
extended model = 0x0 (0)
(family synth) = 0x17 (23)
(model synth) = 0x1 (1)
extended feature flags (0x80000001/edx):
x87 FPU on chip = true
virtual-8086 mode enhancement = true
debugging extensions = true
page size extensions = true
time stamp counter = true
RDMSR and WRMSR support = true
physical address extensions = true
machine check exception = true
CMPXCHG8B inst. = true
APIC on chip = true
SYSCALL and SYSRET instructions = true
memory type range registers = true
global paging extension = true
machine check architecture = true
conditional move/compare instruction = true
page attribute table = true
page size extension = true
multiprocessing capable = false
no-execute page protection = true
AMD multimedia instruction extensions = true
MMX Technology = true
FXSAVE/FXRSTOR = true
SSE extensions = true
1-GB large page support = true
RDTSCP = true
long mode (AA-64) = true
3DNow! instruction extensions = false
3DNow! instructions = false
extended brand id (0x80000001/ebx):
raw = 0x20000000 (536870912)
BrandId = 0x0 (0)
PkgType = AM4 (2)
AMD feature flags (0x80000001/ecx):
LAHF/SAHF supported in 64-bit mode = true
CMP Legacy = true
SVM: secure virtual machine = true
extended APIC space = true
AltMovCr8 = true
LZCNT advanced bit manipulation = true
SSE4A support = true
misaligned SSE mode = true
3DNow! PREFETCH/PREFETCHW instructions = true
OS visible workaround = true
instruction based sampling = false
XOP support = false
SKINIT/STGI support = true
watchdog timer support = true
lightweight profiling support = false
4-operand FMA instruction = false
TCE: translation cache extension = true
NodeId MSR C001100C = false
TBM support = false
topology extensions = true
core performance counter extensions = true
NB/DF performance counter extensions = true
data breakpoint extension = true
performance time-stamp counter support = false
LLC performance counter extensions = true
MWAITX/MONITORX supported = true
Address mask extension support = false
brand = "AMD Ryzen 3 1300X Quad-Core Processor "
L1 TLB/cache information: 2M/4M pages & L1 TLB (0x80000005/eax):
instruction # entries = 0x40 (64)
instruction associativity = 0xff (255)
data # entries = 0x40 (64)
data associativity = 0xff (255)
L1 TLB/cache information: 4K pages & L1 TLB (0x80000005/ebx):
instruction # entries = 0x40 (64)
instruction associativity = 0xff (255)
data # entries = 0x40 (64)
data associativity = 0xff (255)
L1 data cache information (0x80000005/ecx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 0x8 (8)
size (KB) = 0x20 (32)
L1 instruction cache information (0x80000005/edx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 0x4 (4)
size (KB) = 0x40 (64)
L2 TLB/cache information: 2M/4M pages & L2 TLB (0x80000006/eax):
instruction # entries = 0x400 (1024)
instruction associativity = 8 to 15-way (6)
data # entries = 0x600 (1536)
data associativity = 2-way (2)
L2 TLB/cache information: 4K pages & L2 TLB (0x80000006/ebx):
instruction # entries = 0x400 (1024)
instruction associativity = 8 to 15-way (6)
data # entries = 0x600 (1536)
data associativity = 8 to 15-way (6)
L2 unified cache information (0x80000006/ecx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 8 to 15-way (6)
size (KB) = 0x200 (512)
L3 cache information (0x80000006/edx):
line size (bytes) = 0x40 (64)
lines per tag = 0x1 (1)
associativity = 16 to 31-way (8)
size (in 512KB units) = 0x10 (16)
RAS Capability (0x80000007/ebx):
MCA overflow recovery support = true
SUCCOR support = true
HWA: hardware assert support = false
scalable MCA support = true
Advanced Power Management Features (0x80000007/ecx):
CmpUnitPwrSampleTimeRatio = 0x0 (0)
Advanced Power Management Features (0x80000007/edx):
TS: temperature sensing diode = true
FID: frequency ID control = false
VID: voltage ID control = false
TTP: thermal trip = true
TM: thermal monitor = true
STC: software thermal control = false
100 MHz multiplier control = false
hardware P-State control = true
TscInvariant = true
CPB: core performance boost = false
read-only effective frequency interface = true
processor feedback interface = false
APM power reporting = false
connected standby = true
RAPL: running average power limit = true
Physical Address and Linear Address Size (0x80000008/eax):
maximum physical address bits = 0x30 (48)
maximum linear (virtual) address bits = 0x30 (48)
maximum guest physical address bits = 0x0 (0)
Extended Feature Extensions ID (0x80000008/ebx):
CLZERO instruction = true
instructions retired count support = true
always save/restore error pointers = true
INVLPGB instruction = false
RDPRU instruction = false
memory bandwidth enforcement = false
MCOMMIT instruction = false
WBNOINVD instruction = false
IBPB: indirect branch prediction barrier = true
interruptible WBINVD, WBNOINVD = false
IBRS: indirect branch restr speculation = false
STIBP: 1 thr indirect branch predictor = false
CPU prefers: IBRS always on = false
CPU prefers: STIBP always on = false
IBRS preferred over software solution = false
IBRS provides same mode protection = false
EFER[LMSLE] not supported = false
INVLPGB supports TLB flush guest nested = false
ppin processor id number supported = false
SSBD: speculative store bypass disable = false
virtualized SSBD = false
SSBD fixed in hardware = false
CPPC: collaborative processor perf ctrl = false
PSFD: predictive store forward disable = false
not vulnerable to branch type confusion = false
IBPB_RET: ret addr predictor cleared = false
branch sampling feature support = false
(vuln to branch type confusion synth) = true
Size Identifiers (0x80000008/ecx):
number of threads = 0x4 (4)
ApicIdCoreIdSize = 0x4 (4)
performance time-stamp counter size = 40 bits (0)
Feature Extended Size (0x80000008/edx):
max page count for INVLPGB instruction = 0x0 (0)
RDPRU instruction max input support = 0x0 (0)
SVM Secure Virtual Machine (0x8000000a/eax):
SvmRev: SVM revision = 0x1 (1)
SVM Secure Virtual Machine (0x8000000a/edx):
nested paging = true
LBR virtualization = true
SVM lock = true
NRIP save = true
MSR based TSC rate control = true
VMCB clean bits support = true
flush by ASID = true
decode assists = true
PMC virtualization = false
SSSE3/SSE5 opcode set disable = false
pause intercept filter = true
pause filter threshold = true
AVIC: AMD virtual interrupt controller = true
virtualized VMLOAD/VMSAVE = true
virtualized global interrupt flag (GIF) = true
GMET: guest mode execute trap = false
X2AVIC: virtualized X2APIC = false
supervisor shadow stack = false
guest Spec_ctl support = false
ROGPT: read-only guest page table = false
host MCE override = false
INVLPGB/TLBSYNC hyperv interc enable = false
VNMI: NMI virtualization = false
IBS virtualization = false
extended LVT AVIC access changes = false
guest VMCB addr check = false
bus lock threshold = false
idlt HLT intercept = false
NASID: number of address space identifiers = 0x8000 (32768):
L1 TLB information: 1G pages (0x80000019/eax):
instruction # entries = 0x40 (64)
instruction associativity = full (15)
data # entries = 0x40 (64)
data associativity = full (15)
L2 TLB information: 1G pages (0x80000019/ebx):
instruction # entries = 0x0 (0)
instruction associativity = L2 off (0)
data # entries = 0x0 (0)
data associativity = L2 off (0)
Performance Optimization Identifiers (0x8000001a/eax):
128-bit SSE executed full-width = true
MOVU* better than MOVL*/MOVH* = true
256-bit SSE executed full-width = false
Instruction Based Sampling Identifiers (0x8000001b/eax):
IBS feature flags valid = true
IBS fetch sampling = true
IBS execution sampling = true
read write of op counter = true
op counting mode = true
branch target address reporting = true
IbsOpCurCnt and IbsOpMaxCnt extend 7 = true
invalid RIP indication support = true
fused branch micro-op indication support = true
IBS fetch control extended MSR support = true
IBS op data 4 MSR support = false
IBS L3 miss filtering support = false
Lightweight Profiling Capabilities: Availability (0x8000001c/eax):
lightweight profiling = false
LWPVAL instruction = false
instruction retired event = false
branch retired event = false
DC miss event = false
core clocks not halted event = false
core reference clocks not halted event = false
continuous mode sampling = false
tsc in event record = false
interrupt on threshold overflow = false
Lightweight Profiling Capabilities: Supported (0x8000001c/edx):
lightweight profiling = false
LWPVAL instruction = false
instruction retired event = false
branch retired event = false
DC miss event = false
core clocks not halted event = false
core reference clocks not halted event = false
continuous mode sampling = false
tsc in event record = false
interrupt on threshold overflow = false
Lightweight Profiling Capabilities (0x8000001c/ebx):
LWPCB byte size = 0x0 (0)
event record byte size = 0x0 (0)
maximum EventId = 0x0 (0)
EventInterval1 field offset = 0x0 (0)
Lightweight Profiling Capabilities (0x8000001c/ecx):
latency counter bit size = 0x0 (0)
data cache miss address valid = false
amount cache latency is rounded = 0x0 (0)
LWP implementation version = 0x0 (0)
event ring buffer size in records = 0x0 (0)
branch prediction filtering = false
IP filtering = false
cache level filtering = false
cache latency filteing = false
Cache Properties (0x8000001d):
--- cache 0 ---
type = data (1)
level = 0x1 (1)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x8 (8)
number of sets = 64
write-back invalidate = false
cache inclusive of lower levels = false
(synth size) = 32768 (32 KB)
--- cache 1 ---
type = instruction (2)
level = 0x1 (1)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x4 (4)
number of sets = 256
write-back invalidate = false
cache inclusive of lower levels = false
(synth size) = 65536 (64 KB)
--- cache 2 ---
type = unified (3)
level = 0x2 (2)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x0 (0)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x8 (8)
number of sets = 1024
write-back invalidate = false
cache inclusive of lower levels = true
(synth size) = 524288 (512 KB)
--- cache 3 ---
type = unified (3)
level = 0x3 (3)
self-initializing = true
fully associative = false
extra cores sharing this cache = 0x1 (1)
line size in bytes = 0x40 (64)
physical line partitions = 0x1 (1)
number of ways = 0x10 (16)
number of sets = 4096
write-back invalidate = true
cache inclusive of lower levels = false
(synth size) = 4194304 (4 MB)
extended APIC ID = 9
Core Identifiers (0x8000001e/ebx):
core ID = 0x9 (9)
threads per core = 0x1 (1)
Node Identifiers (0x8000001e/ecx):
node ID = 0x0 (0)
nodes per processor = 0x1 (1)
AMD Secure Encryption (0x8000001f):
SME: secure memory encryption support = true
SEV: secure encrypted virtualize support = true
VM page flush MSR support = true
SEV-ES: SEV encrypted state support = false
SEV-SNP: SEV secure nested paging = false
VMPL: VM permission levels = false
RMPQUERY instruction support = false
VMPL supervisor shadow stack support = false
Secure TSC supported = false
virtual TSC_AUX supported = false
hardware cache coher across enc domains = false
SEV guest exec only from 64-bit host = false
restricted injection = false
alternate injection = false
full debug state swap for SEV-ES/SEV-SNP = false
disallowing IBS use by host = false
VTE: SEV virtual transparent encryption = false
VMGEXIT parameter support = false
virtual TOM MSR support = false
IBS virtual support for SEV-ES/SEV-SNP = false
PMC virtual support for SEV-ES/SEV-SNP = false
RMPREAD instruction = false
VMSA register protection support = false
SMT protection support = false
secure AVIC support = false
allowed SEV features support = false
SVSM communication page MSR support = false
VIRT_RMPUPDATE & VIRT_PSMASH MSR support = false
write to hypervisor in-used allowed = false
IBPB on entry support = false
encryption bit position in PTE = 0x2f (47)
physical address space width reduction = 0x5 (5)
number of VM permission levels = 0x0 (0)
number of SEV-enabled guests supported = 0xf (15)
minimum SEV guest ASID = 0x0 (0)
(instruction supported synth):
CMPXCHG8B = true
conditional move/compare = true
PREFETCH/PREFETCHW = true
(multi-processing synth) = multi-core (c=4)
(multi-processing method) = AMD leaf 1/0x8000008
(APIC widths synth): CORE_width=2 SMT_width=0
(APIC synth): PKG_ID=2 CORE_ID=1 SMT_ID=0
(uarch synth) = AMD Zen, 14nm
(synth) = AMD Ryzen 1000 (Summit Ridge ZP-B1) [Zen], 14nm
[-- Attachment #1.3: dmesg.txt --]
[-- Type: text/plain, Size: 86780 bytes --]
[ 0.000000] Linux version 6.9.9-arch1-1 (linux@archlinux) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Fri, 12 Jul 2024 00:06:53 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e317bc8b-4ecb-4d50-8a10-16c83daf75b3 rw nvidia-drm.modeset=1 iommu=off
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000dbb65fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbb66000-0x00000000dbc62fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dbc63000-0x00000000dbcdffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dbce0000-0x00000000dc1effff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dc1f0000-0x00000000dcee7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dcee8000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f37ffff] usable
[ 0.000000] The simpledrm driver will not be probed
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0xcebca018-0xcebd8057] usable ==> usable
[ 0.000000] e820: update [mem 0xceb99018-0xcebc9257] usable ==> usable
[ 0.000000] e820: update [mem 0xceb68018-0xceb98257] usable ==> usable
[ 0.000000] e820: update [mem 0xceb48018-0xceb67457] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009cfffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000000a20a000-0x000000000affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000ceb48017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb48018-0x00000000ceb67457] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb67458-0x00000000ceb68017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb68018-0x00000000ceb98257] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb98258-0x00000000ceb99017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb99018-0x00000000cebc9257] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cebc9258-0x00000000cebca017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cebca018-0x00000000cebd8057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cebd8058-0x00000000dbb65fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dbb66000-0x00000000dbc62fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dbc63000-0x00000000dbcdffff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000dbce0000-0x00000000dc1effff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000dc1f0000-0x00000000dcee7fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dcee8000-0x00000000deffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f37ffff] usable
[ 0.000000] efi: EFI v2.7 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xdc16f000 ACPI=0xdc16f000 SMBIOS=0xdcd1a000 SMBIOS 3.0=0xdcd19000 ESRT=0xda43ca18 MEMATTR=0xd77e3018 INITRD=0xd2e47e98 RNG=0xdbcdf018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem35: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[ 0.000000] efi: Remove mem36: MMIO range=[0xfd100000-0xfdffffff] (15MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd100000-0xfdffffff] reserved
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
[ 0.000000] efi: Remove mem38: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
[ 0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] reserved
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem40: MMIO range=[0xfec30000-0xfec30fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem41: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem42: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
[ 0.000000] efi: Not removing mem43: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[ 0.000000] efi: Not removing mem44: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
[ 0.000000] efi: Not removing mem45: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
[ 0.000000] efi: Remove mem46: MMIO range=[0xfee00000-0xfeefffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfee00000-0xfeefffff] reserved
[ 0.000000] efi: Remove mem47: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. AB350M-D3V/AB350M-D3V-CF, BIOS F23 08/08/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3493.137 MHz processor
[ 0.000574] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000577] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000590] last_pfn = 0x21f380 max_arch_pfn = 0x400000000
[ 0.000597] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
[ 0.000599] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000824] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000832] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.004881] esrt: Reserving ESRT space from 0x00000000da43ca18 to 0x00000000da43ca50.
[ 0.004887] e820: update [mem 0xda43c000-0xda43cfff] usable ==> reserved
[ 0.004905] Using GB pages for direct mapping
[ 0.005872] Secure boot disabled
[ 0.005873] RAMDISK: [mem 0xcebd9000-0xcf49bfff]
[ 0.005892] ACPI: Early table checksum verification disabled
[ 0.005895] ACPI: RSDP 0x00000000DC16F000 000024 (v02 ALASKA)
[ 0.005898] ACPI: XSDT 0x00000000DC16F098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005904] ACPI: FACP 0x00000000DC1761E8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.005908] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20230628/tbfadt-615)
[ 0.005912] ACPI: DSDT 0x00000000DC16F1D8 00700F (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.005915] ACPI: FACS 0x00000000DC1D8E00 000040
[ 0.005918] ACPI: APIC 0x00000000DC176300 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.005921] ACPI: FPDT 0x00000000DC1763E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005924] ACPI: FIDT 0x00000000DC176428 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005926] ACPI: SSDT 0x00000000DC1764C8 008C98 (v02 ALASKA A M I 00000002 MSFT 04000000)
[ 0.005929] ACPI: CRAT 0x00000000DC17F160 000850 (v01 ALASKA A M I 00000001 AMD 00000001)
[ 0.005932] ACPI: CDIT 0x00000000DC17F9B0 000029 (v01 ALASKA A M I 00000001 AMD 00000001)
[ 0.005935] ACPI: SSDT 0x00000000DC17F9E0 002DBA (v01 ALASKA A M I 00000001 INTL 20120913)
[ 0.005938] ACPI: MCFG 0x00000000DC1827A0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.005940] ACPI: HPET 0x00000000DC1827E0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.005943] ACPI: SSDT 0x00000000DC182818 000024 (v01 ALASKA A M I 00001000 INTL 20120913)
[ 0.005946] ACPI: UEFI 0x00000000DC182840 000048 (v01 ALASKA A M I 00000000 00000000)
[ 0.005949] ACPI: BGRT 0x00000000DC182888 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005951] ACPI: IVRS 0x00000000DC1828C0 0000D0 (v02 ALASKA A M I 00000001 AMD 00000000)
[ 0.005954] ACPI: SSDT 0x00000000DC182990 001A41 (v01 ALASKA A M I 00000001 INTL 20120913)
[ 0.005957] ACPI: SSDT 0x00000000DC1843D8 0000F8 (v01 ALASKA A M I 00001000 INTL 20120913)
[ 0.005960] ACPI: WSMT 0x00000000DC1844D0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005962] ACPI: Reserving FACP table memory at [mem 0xdc1761e8-0xdc1762fb]
[ 0.005963] ACPI: Reserving DSDT table memory at [mem 0xdc16f1d8-0xdc1761e6]
[ 0.005964] ACPI: Reserving FACS table memory at [mem 0xdc1d8e00-0xdc1d8e3f]
[ 0.005965] ACPI: Reserving APIC table memory at [mem 0xdc176300-0xdc1763dd]
[ 0.005966] ACPI: Reserving FPDT table memory at [mem 0xdc1763e0-0xdc176423]
[ 0.005967] ACPI: Reserving FIDT table memory at [mem 0xdc176428-0xdc1764c3]
[ 0.005968] ACPI: Reserving SSDT table memory at [mem 0xdc1764c8-0xdc17f15f]
[ 0.005969] ACPI: Reserving CRAT table memory at [mem 0xdc17f160-0xdc17f9af]
[ 0.005970] ACPI: Reserving CDIT table memory at [mem 0xdc17f9b0-0xdc17f9d8]
[ 0.005971] ACPI: Reserving SSDT table memory at [mem 0xdc17f9e0-0xdc182799]
[ 0.005972] ACPI: Reserving MCFG table memory at [mem 0xdc1827a0-0xdc1827db]
[ 0.005973] ACPI: Reserving HPET table memory at [mem 0xdc1827e0-0xdc182817]
[ 0.005974] ACPI: Reserving SSDT table memory at [mem 0xdc182818-0xdc18283b]
[ 0.005974] ACPI: Reserving UEFI table memory at [mem 0xdc182840-0xdc182887]
[ 0.005975] ACPI: Reserving BGRT table memory at [mem 0xdc182888-0xdc1828bf]
[ 0.005976] ACPI: Reserving IVRS table memory at [mem 0xdc1828c0-0xdc18298f]
[ 0.005977] ACPI: Reserving SSDT table memory at [mem 0xdc182990-0xdc1843d0]
[ 0.005978] ACPI: Reserving SSDT table memory at [mem 0xdc1843d8-0xdc1844cf]
[ 0.005979] ACPI: Reserving WSMT table memory at [mem 0xdc1844d0-0xdc1844f7]
[ 0.006062] No NUMA configuration found
[ 0.006063] Faking a node at [mem 0x0000000000000000-0x000000021f37ffff]
[ 0.006065] NODE_DATA(0) allocated [mem 0x21f37b000-0x21f37ffff]
[ 0.006091] Zone ranges:
[ 0.006092] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.006093] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.006095] Normal [mem 0x0000000100000000-0x000000021f37ffff]
[ 0.006096] Device empty
[ 0.006097] Movable zone start for each node
[ 0.006098] Early memory node ranges
[ 0.006098] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.006100] node 0: [mem 0x0000000000100000-0x0000000009cfffff]
[ 0.006101] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.006102] node 0: [mem 0x000000000a20a000-0x000000000affffff]
[ 0.006103] node 0: [mem 0x000000000b020000-0x00000000dbb65fff]
[ 0.006104] node 0: [mem 0x00000000dcee8000-0x00000000deffffff]
[ 0.006105] node 0: [mem 0x0000000100000000-0x000000021f37ffff]
[ 0.006106] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f37ffff]
[ 0.006111] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.006136] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.006347] On node 0, zone DMA32: 768 pages in unavailable ranges
[ 0.006369] On node 0, zone DMA32: 10 pages in unavailable ranges
[ 0.013898] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.014040] On node 0, zone DMA32: 4994 pages in unavailable ranges
[ 0.024692] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.024735] On node 0, zone Normal: 3200 pages in unavailable ranges
[ 0.025170] ACPI: PM-Timer IO Port: 0x808
[ 0.025177] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025181] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.025198] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.025203] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.025205] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.025207] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.025211] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.025212] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.025222] e820: update [mem 0xd8135000-0xd8179fff] usable ==> reserved
[ 0.025244] CPU topo: Max. logical packages: 1
[ 0.025245] CPU topo: Max. logical dies: 1
[ 0.025246] CPU topo: Max. dies per package: 1
[ 0.025250] CPU topo: Max. threads per core: 1
[ 0.025251] CPU topo: Num. cores per package: 4
[ 0.025252] CPU topo: Num. threads per package: 4
[ 0.025252] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.025253] CPU topo: Rejected CPUs 12
[ 0.025277] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.025279] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.025281] PM: hibernation: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
[ 0.025282] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
[ 0.025284] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.025286] PM: hibernation: Registered nosave memory: [mem 0xceb48000-0xceb48fff]
[ 0.025288] PM: hibernation: Registered nosave memory: [mem 0xceb67000-0xceb67fff]
[ 0.025288] PM: hibernation: Registered nosave memory: [mem 0xceb68000-0xceb68fff]
[ 0.025290] PM: hibernation: Registered nosave memory: [mem 0xceb98000-0xceb98fff]
[ 0.025291] PM: hibernation: Registered nosave memory: [mem 0xceb99000-0xceb99fff]
[ 0.025293] PM: hibernation: Registered nosave memory: [mem 0xcebc9000-0xcebc9fff]
[ 0.025293] PM: hibernation: Registered nosave memory: [mem 0xcebca000-0xcebcafff]
[ 0.025295] PM: hibernation: Registered nosave memory: [mem 0xcebd8000-0xcebd8fff]
[ 0.025297] PM: hibernation: Registered nosave memory: [mem 0xd8135000-0xd8179fff]
[ 0.025299] PM: hibernation: Registered nosave memory: [mem 0xda43c000-0xda43cfff]
[ 0.025301] PM: hibernation: Registered nosave memory: [mem 0xdbb66000-0xdbc62fff]
[ 0.025301] PM: hibernation: Registered nosave memory: [mem 0xdbc63000-0xdbcdffff]
[ 0.025302] PM: hibernation: Registered nosave memory: [mem 0xdbce0000-0xdc1effff]
[ 0.025303] PM: hibernation: Registered nosave memory: [mem 0xdc1f0000-0xdcee7fff]
[ 0.025305] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[ 0.025306] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xfe9fffff]
[ 0.025306] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.025307] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfec0ffff]
[ 0.025308] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.025309] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.025310] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.025310] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.025311] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.025312] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.025313] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.025313] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.025314] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.025315] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.025316] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.025317] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.025317] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.025318] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xffffffff]
[ 0.025320] [mem 0xe0000000-0xfe9fffff] available for PCI devices
[ 0.025321] Booting paravirtualized kernel on bare hardware
[ 0.025324] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.030564] setup_percpu: NR_CPUS:320 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.030917] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[ 0.030924] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[ 0.030926] pcpu-alloc: [0] 0 1 2 3
[ 0.030947] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e317bc8b-4ecb-4d50-8a10-16c83daf75b3 rw nvidia-drm.modeset=1 iommu=off
[ 0.031012] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[ 0.031980] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.032655] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.032698] Fallback order for Node 0: 0
[ 0.032703] Built 1 zonelists, mobility grouping on. Total pages: 2051232
[ 0.032705] Policy zone: Normal
[ 0.033011] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.051366] Memory: 8075740K/8335820K available (18432K kernel code, 2165K rwdata, 13260K rodata, 3420K init, 3600K bss, 259820K reserved, 0K cma-reserved)
[ 0.051567] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.051603] ftrace: allocating 50028 entries in 196 pages
[ 0.059238] ftrace: allocated 196 pages with 3 groups
[ 0.059319] Dynamic Preempt: full
[ 0.059356] rcu: Preemptible hierarchical RCU implementation.
[ 0.059356] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.059357] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.059358] Trampoline variant of Tasks RCU enabled.
[ 0.059359] Rude variant of Tasks RCU enabled.
[ 0.059359] Tracing variant of Tasks RCU enabled.
[ 0.059360] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.059361] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.059367] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.059368] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.059369] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.063201] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[ 0.063395] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.063530] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.063558] Console: colour dummy device 80x25
[ 0.063561] printk: legacy console [tty0] enabled
[ 0.063602] ACPI: Core revision 20230628
[ 0.063720] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.063747] APIC: Switch to symmetric I/O mode setup
[ 0.064586] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080414] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3259fe1cf6e, max_idle_ns: 440795365631 ns
[ 0.080419] Calibrating delay loop (skipped), value calculated using timer frequency.. 6989.36 BogoMIPS (lpj=11643790)
[ 0.080430] AMD Zen1 DIV0 bug detected. Disable SMT for full protection.
[ 0.080432] SVM disabled (by BIOS) in MSR_VM_CR
[ 0.080460] LVT offset 1 assigned for vector 0xf9
[ 0.080525] LVT offset 2 assigned for vector 0xf4
[ 0.080541] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.080542] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.080546] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.080548] Spectre V2 : Mitigation: Retpolines
[ 0.080548] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.080549] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.080550] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.080550] RETBleed: Mitigation: untrained return thunk
[ 0.080552] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.080553] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.080558] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.080559] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.080560] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.080561] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.080562] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.097434] Freeing SMP alternatives memory: 40K
[ 0.097438] pid_max: default: 32768 minimum: 301
[ 0.099055] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[ 0.099076] landlock: Up and running.
[ 0.099077] Yama: becoming mindful.
[ 0.099083] LSM support for eBPF active
[ 0.099111] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.099123] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.206501] smpboot: CPU0: AMD Ryzen 3 1300X Quad-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[ 0.206665] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.206669] ... version: 0
[ 0.206670] ... bit width: 48
[ 0.206671] ... generic registers: 6
[ 0.206672] ... value mask: 0000ffffffffffff
[ 0.206673] ... max period: 00007fffffffffff
[ 0.206673] ... fixed-purpose events: 0
[ 0.206674] ... event mask: 000000000000003f
[ 0.206737] signal: max sigframe size: 1776
[ 0.206767] rcu: Hierarchical SRCU implementation.
[ 0.206768] rcu: Max phase no-delay instances is 1000.
[ 0.207083] MCE: In-kernel MCE decoding enabled.
[ 0.207083] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.207083] smp: Bringing up secondary CPUs ...
[ 0.207083] smpboot: x86: Booting SMP configuration:
[ 0.207083] .... node #0, CPUs: #1 #2 #3
[ 0.212419] smp: Brought up 1 node, 4 CPUs
[ 0.212419] smpboot: Total of 4 processors activated (27956.47 BogoMIPS)
[ 0.213901] devtmpfs: initialized
[ 0.213901] x86/mm: Memory block size: 128MB
[ 0.214399] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
[ 0.214399] ACPI: PM: Registering ACPI NVS region [mem 0xdbce0000-0xdc1effff] (5308416 bytes)
[ 0.214399] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.214399] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.214399] pinctrl core: initialized pinctrl subsystem
[ 0.214399] PM: RTC time: 18:08:34, date: 2024-07-14
[ 0.214399] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.214567] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.214686] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.214810] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.214822] audit: initializing netlink subsys (disabled)
[ 0.214832] audit: type=2000 audit(1720980514.149:1): state=initialized audit_enabled=0 res=1
[ 0.214832] thermal_sys: Registered thermal governor 'fair_share'
[ 0.214832] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.214832] thermal_sys: Registered thermal governor 'step_wise'
[ 0.214832] thermal_sys: Registered thermal governor 'user_space'
[ 0.214832] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.214832] cpuidle: using governor ladder
[ 0.214832] cpuidle: using governor menu
[ 0.214832] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.214832] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[ 0.214832] PCI: Using configuration type 1 for base access
[ 0.214832] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.217131] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.217131] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.217131] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.217131] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.217137] Demotion targets for Node 0: null
[ 0.217175] ACPI: Added _OSI(Module Device)
[ 0.217176] ACPI: Added _OSI(Processor Device)
[ 0.217177] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.217178] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.225236] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.227524] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.231071] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.231071] ACPI: Interpreter enabled
[ 0.231071] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.231071] ACPI: Using IOAPIC for interrupt routing
[ 0.231600] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.231601] PCI: Using E820 reservations for host bridge windows
[ 0.231836] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.240587] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.240594] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.240677] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[ 0.240828] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.240838] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.241223] PCI host bridge to bus 0000:00
[ 0.241225] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.241227] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.241228] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.241229] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.241231] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.241232] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[ 0.241233] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.241235] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.241249] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 conventional PCI endpoint
[ 0.241330] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 conventional PCI endpoint
[ 0.241414] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.241462] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400 PCIe Root Port
[ 0.241476] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.241481] pci 0000:00:01.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.241570] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.241747] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 PCIe Root Port
[ 0.241761] pci 0000:00:01.3: PCI bridge to [bus 02-0a]
[ 0.241765] pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
[ 0.241767] pci 0000:00:01.3: bridge window [mem 0xf6400000-0xf77fffff]
[ 0.241772] pci 0000:00:01.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.241853] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[ 0.242058] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.242124] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.242173] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 PCIe Root Port
[ 0.242192] pci 0000:00:03.1: PCI bridge to [bus 0b]
[ 0.242196] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.242199] pci 0000:00:03.1: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.242206] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.242470] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.242676] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.242742] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.242788] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 PCIe Root Port
[ 0.242801] pci 0000:00:07.1: PCI bridge to [bus 0c]
[ 0.242806] pci 0000:00:07.1: bridge window [mem 0xf7800000-0xf7afffff]
[ 0.242822] pci 0000:00:07.1: enabling Extended Tags
[ 0.242888] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.243064] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.243113] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 PCIe Root Port
[ 0.243127] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.243131] pci 0000:00:08.1: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.243388] pci 0000:00:08.1: enabling Extended Tags
[ 0.243457] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.243664] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.243873] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.244088] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 conventional PCI endpoint
[ 0.244124] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 conventional PCI endpoint
[ 0.244156] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 conventional PCI endpoint
[ 0.244189] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 conventional PCI endpoint
[ 0.244222] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 conventional PCI endpoint
[ 0.244254] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 conventional PCI endpoint
[ 0.244287] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 conventional PCI endpoint
[ 0.244319] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 conventional PCI endpoint
[ 0.244434] pci 0000:01:00.0: [144d:a804] type 00 class 0x010802 PCIe Endpoint
[ 0.244449] pci 0000:01:00.0: BAR 0 [mem 0xf7c00000-0xf7c03fff 64bit]
[ 0.244646] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.244721] pci 0000:02:00.0: [1022:43bb] type 00 class 0x0c0330 PCIe Legacy Endpoint
[ 0.244737] pci 0000:02:00.0: BAR 0 [mem 0xf77a0000-0xf77a7fff 64bit]
[ 0.244819] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.244959] pci 0000:02:00.1: [1022:43b7] type 00 class 0x010601 PCIe Legacy Endpoint
[ 0.245001] pci 0000:02:00.1: BAR 5 [mem 0xf7780000-0xf779ffff]
[ 0.245008] pci 0000:02:00.1: ROM [mem 0xf7700000-0xf777ffff pref]
[ 0.245049] pci 0000:02:00.1: PME# supported from D3hot D3cold
[ 0.245124] pci 0000:02:00.2: [1022:43b2] type 01 class 0x060400 PCIe Switch Upstream Port
[ 0.245149] pci 0000:02:00.2: PCI bridge to [bus 03-0a]
[ 0.245155] pci 0000:02:00.2: bridge window [io 0xd000-0xefff]
[ 0.245157] pci 0000:02:00.2: bridge window [mem 0xf6400000-0xf76fffff]
[ 0.245166] pci 0000:02:00.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.245216] pci 0000:02:00.2: PME# supported from D3hot D3cold
[ 0.245310] pci 0000:00:01.3: PCI bridge to [bus 02-0a]
[ 0.245398] pci 0000:03:00.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.245425] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.245505] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.245610] pci 0000:03:01.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.245636] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.245716] pci 0000:03:01.0: PME# supported from D3hot D3cold
[ 0.245824] pci 0000:03:04.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.245850] pci 0000:03:04.0: PCI bridge to [bus 06]
[ 0.245856] pci 0000:03:04.0: bridge window [io 0xe000-0xefff]
[ 0.245858] pci 0000:03:04.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 0.245867] pci 0000:03:04.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.245934] pci 0000:03:04.0: PME# supported from D3hot D3cold
[ 0.246038] pci 0000:03:05.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.246065] pci 0000:03:05.0: PCI bridge to [bus 07]
[ 0.246145] pci 0000:03:05.0: PME# supported from D3hot D3cold
[ 0.246249] pci 0000:03:06.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.246276] pci 0000:03:06.0: PCI bridge to [bus 08-09]
[ 0.246281] pci 0000:03:06.0: bridge window [io 0xd000-0xdfff]
[ 0.246284] pci 0000:03:06.0: bridge window [mem 0xf6400000-0xf74fffff]
[ 0.246358] pci 0000:03:06.0: PME# supported from D3hot D3cold
[ 0.246466] pci 0000:03:07.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.246493] pci 0000:03:07.0: PCI bridge to [bus 0a]
[ 0.246573] pci 0000:03:07.0: PME# supported from D3hot D3cold
[ 0.246685] pci 0000:02:00.2: PCI bridge to [bus 03-0a]
[ 0.246725] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.246770] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.246845] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[ 0.246871] pci 0000:06:00.0: BAR 0 [io 0xe000-0xe0ff]
[ 0.246907] pci 0000:06:00.0: BAR 2 [mem 0xf7600000-0xf7600fff 64bit]
[ 0.246929] pci 0000:06:00.0: BAR 4 [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.247078] pci 0000:06:00.0: supports D1 D2
[ 0.247079] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.247287] pci 0000:03:04.0: PCI bridge to [bus 06]
[ 0.247326] pci 0000:03:05.0: PCI bridge to [bus 07]
[ 0.247415] pci 0000:08:00.0: [8086:10c9] type 00 class 0x020000 PCIe Endpoint
[ 0.247451] pci 0000:08:00.0: BAR 0 [mem 0xf7420000-0xf743ffff]
[ 0.247471] pci 0000:08:00.0: BAR 1 [mem 0xf7000000-0xf73fffff]
[ 0.247491] pci 0000:08:00.0: BAR 2 [io 0xd020-0xd03f]
[ 0.247511] pci 0000:08:00.0: BAR 3 [mem 0xf74c4000-0xf74c7fff]
[ 0.247567] pci 0000:08:00.0: ROM [mem 0xf6c00000-0xf6ffffff pref]
[ 0.247741] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.247818] pci 0000:08:00.0: VF BAR 0 [mem 0xf74a0000-0xf74a3fff 64bit]
[ 0.247820] pci 0000:08:00.0: VF BAR 0 [mem 0xf74a0000-0xf74bffff 64bit]: contains BAR 0 for 8 VFs
[ 0.247868] pci 0000:08:00.0: VF BAR 3 [mem 0xf7480000-0xf7483fff 64bit]
[ 0.247869] pci 0000:08:00.0: VF BAR 3 [mem 0xf7480000-0xf749ffff 64bit]: contains BAR 3 for 8 VFs
[ 0.248070] pci 0000:08:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:03:06.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 0.248224] pci 0000:08:00.1: [8086:10c9] type 00 class 0x020000 PCIe Endpoint
[ 0.248260] pci 0000:08:00.1: BAR 0 [mem 0xf7400000-0xf741ffff]
[ 0.248280] pci 0000:08:00.1: BAR 1 [mem 0xf6800000-0xf6bfffff]
[ 0.248300] pci 0000:08:00.1: BAR 2 [io 0xd000-0xd01f]
[ 0.248319] pci 0000:08:00.1: BAR 3 [mem 0xf74c0000-0xf74c3fff]
[ 0.248376] pci 0000:08:00.1: ROM [mem 0xf6400000-0xf67fffff pref]
[ 0.248549] pci 0000:08:00.1: PME# supported from D0 D3hot D3cold
[ 0.248625] pci 0000:08:00.1: VF BAR 0 [mem 0xf7460000-0xf7463fff 64bit]
[ 0.248626] pci 0000:08:00.1: VF BAR 0 [mem 0xf7460000-0xf747ffff 64bit]: contains BAR 0 for 8 VFs
[ 0.248674] pci 0000:08:00.1: VF BAR 3 [mem 0xf7440000-0xf7443fff 64bit]
[ 0.248675] pci 0000:08:00.1: VF BAR 3 [mem 0xf7440000-0xf745ffff 64bit]: contains BAR 3 for 8 VFs
[ 0.249019] pci 0000:03:06.0: PCI bridge to [bus 08-09]
[ 0.249058] pci 0000:03:07.0: PCI bridge to [bus 0a]
[ 0.249448] pci 0000:0b:00.0: [10de:1d01] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.249465] pci 0000:0b:00.0: BAR 0 [mem 0xf5000000-0xf5ffffff]
[ 0.249479] pci 0000:0b:00.0: BAR 1 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.249492] pci 0000:0b:00.0: BAR 3 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.249501] pci 0000:0b:00.0: BAR 5 [io 0xf000-0xf07f]
[ 0.249510] pci 0000:0b:00.0: ROM [mem 0xf6000000-0xf607ffff pref]
[ 0.249544] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.249682] pci 0000:0b:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:03.1 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 0.249762] pci 0000:0b:00.1: [10de:0fb8] type 00 class 0x040300 PCIe Endpoint
[ 0.249778] pci 0000:0b:00.1: BAR 0 [mem 0xf6080000-0xf6083fff]
[ 0.249962] pci 0000:00:03.1: PCI bridge to [bus 0b]
[ 0.250028] pci 0000:0c:00.0: [1022:145a] type 00 class 0x130000 PCIe Endpoint
[ 0.250051] pci 0000:0c:00.0: enabling Extended Tags
[ 0.250135] pci 0000:0c:00.2: [1022:1456] type 00 class 0x108000 PCIe Endpoint
[ 0.250146] pci 0000:0c:00.2: BAR 2 [mem 0xf7900000-0xf79fffff]
[ 0.250154] pci 0000:0c:00.2: BAR 5 [mem 0xf7a00000-0xf7a01fff]
[ 0.250160] pci 0000:0c:00.2: enabling Extended Tags
[ 0.250259] pci 0000:0c:00.3: [1022:145c] type 00 class 0x0c0330 PCIe Endpoint
[ 0.250268] pci 0000:0c:00.3: BAR 0 [mem 0xf7800000-0xf78fffff 64bit]
[ 0.250288] pci 0000:0c:00.3: enabling Extended Tags
[ 0.250316] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
[ 0.250396] pci 0000:00:07.1: PCI bridge to [bus 0c]
[ 0.250470] pci 0000:0d:00.0: [1022:1455] type 00 class 0x130000 PCIe Endpoint
[ 0.250493] pci 0000:0d:00.0: enabling Extended Tags
[ 0.250584] pci 0000:0d:00.2: [1022:7901] type 00 class 0x010601 PCIe Endpoint
[ 0.250609] pci 0000:0d:00.2: BAR 5 [mem 0xf7b08000-0xf7b08fff]
[ 0.250617] pci 0000:0d:00.2: enabling Extended Tags
[ 0.250648] pci 0000:0d:00.2: PME# supported from D3hot D3cold
[ 0.250721] pci 0000:0d:00.3: [1022:1457] type 00 class 0x040300 PCIe Endpoint
[ 0.250728] pci 0000:0d:00.3: BAR 0 [mem 0xf7b00000-0xf7b07fff]
[ 0.250746] pci 0000:0d:00.3: enabling Extended Tags
[ 0.250776] pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold
[ 0.250853] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.251239] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.251291] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.251336] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.251392] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.251442] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.251482] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.251523] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.251564] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.252060] iommu: Default domain type: Translated
[ 0.252060] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.252060] SCSI subsystem initialized
[ 0.252060] libata version 3.00 loaded.
[ 0.252060] ACPI: bus type USB registered
[ 0.252060] usbcore: registered new interface driver usbfs
[ 0.252060] usbcore: registered new interface driver hub
[ 0.252060] usbcore: registered new device driver usb
[ 0.252060] EDAC MC: Ver: 3.0.0
[ 0.252060] efivars: Registered efivars operations
[ 0.252060] NetLabel: Initializing
[ 0.252060] NetLabel: domain hash size = 128
[ 0.252060] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.252060] NetLabel: unlabeled traffic allowed by default
[ 0.252060] mctp: management component transport protocol core
[ 0.252060] NET: Registered PF_MCTP protocol family
[ 0.252060] PCI: Using ACPI for IRQ routing
[ 0.254734] PCI: pci_cache_line_size set to 64 bytes
[ 0.254810] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[ 0.254812] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.254813] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.254814] e820: reserve RAM buffer [mem 0xceb48018-0xcfffffff]
[ 0.254815] e820: reserve RAM buffer [mem 0xceb68018-0xcfffffff]
[ 0.254816] e820: reserve RAM buffer [mem 0xceb99018-0xcfffffff]
[ 0.254817] e820: reserve RAM buffer [mem 0xcebca018-0xcfffffff]
[ 0.254818] e820: reserve RAM buffer [mem 0xd8135000-0xdbffffff]
[ 0.254819] e820: reserve RAM buffer [mem 0xda43c000-0xdbffffff]
[ 0.254820] e820: reserve RAM buffer [mem 0xdbb66000-0xdbffffff]
[ 0.254821] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.254822] e820: reserve RAM buffer [mem 0x21f380000-0x21fffffff]
[ 0.257103] pci 0000:0b:00.0: vgaarb: setting as boot VGA device
[ 0.257103] pci 0000:0b:00.0: vgaarb: bridge control possible
[ 0.257103] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.257103] vgaarb: loaded
[ 0.257120] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.257124] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.259197] clocksource: Switched to clocksource tsc-early
[ 0.259248] VFS: Disk quotas dquot_6.6.0
[ 0.259248] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.259248] pnp: PnP ACPI init
[ 0.259248] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.259248] system 00:02: [io 0x0a00-0x0a2f] has been reserved
[ 0.259248] system 00:02: [io 0x0a30-0x0a3f] has been reserved
[ 0.259248] system 00:02: [io 0x0a40-0x0a4f] has been reserved
[ 0.259248] pnp 00:03: [dma 0 disabled]
[ 0.259248] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.259248] system 00:04: [io 0x040b] has been reserved
[ 0.259248] system 00:04: [io 0x04d6] has been reserved
[ 0.259248] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.259248] system 00:04: [io 0x0c14] has been reserved
[ 0.259248] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.259248] system 00:04: [io 0x0c52] has been reserved
[ 0.259248] system 00:04: [io 0x0c6c] has been reserved
[ 0.259248] system 00:04: [io 0x0c6f] has been reserved
[ 0.259248] system 00:04: [io 0x0cd0-0x0cd1] has been reserved
[ 0.259248] system 00:04: [io 0x0cd2-0x0cd3] has been reserved
[ 0.259248] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.259248] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.259248] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.259248] system 00:04: [io 0x0800-0x089f] has been reserved
[ 0.259248] system 00:04: [io 0x0b00-0x0b0f] has been reserved
[ 0.259248] system 00:04: [io 0x0b20-0x0b3f] has been reserved
[ 0.259248] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.259248] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.259248] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.259248] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.259248] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.259248] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.259248] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.259248] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.259248] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.259248] pnp: PnP ACPI: found 5 devices
[ 0.264105] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.264153] NET: Registered PF_INET protocol family
[ 0.264254] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.275856] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.275885] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.275922] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.276104] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.276216] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.276275] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.276304] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.276326] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.276369] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.276376] NET: Registered PF_XDP protocol family
[ 0.276396] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.276402] pci 0000:00:01.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.276409] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.276418] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.276428] pci 0000:03:04.0: PCI bridge to [bus 06]
[ 0.276430] pci 0000:03:04.0: bridge window [io 0xe000-0xefff]
[ 0.276434] pci 0000:03:04.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 0.276437] pci 0000:03:04.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.276443] pci 0000:03:05.0: PCI bridge to [bus 07]
[ 0.276452] pci 0000:03:06.0: PCI bridge to [bus 08-09]
[ 0.276454] pci 0000:03:06.0: bridge window [io 0xd000-0xdfff]
[ 0.276458] pci 0000:03:06.0: bridge window [mem 0xf6400000-0xf74fffff]
[ 0.276465] pci 0000:03:07.0: PCI bridge to [bus 0a]
[ 0.276474] pci 0000:02:00.2: PCI bridge to [bus 03-0a]
[ 0.276476] pci 0000:02:00.2: bridge window [io 0xd000-0xefff]
[ 0.276479] pci 0000:02:00.2: bridge window [mem 0xf6400000-0xf76fffff]
[ 0.276482] pci 0000:02:00.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.276487] pci 0000:00:01.3: PCI bridge to [bus 02-0a]
[ 0.276488] pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
[ 0.276491] pci 0000:00:01.3: bridge window [mem 0xf6400000-0xf77fffff]
[ 0.276493] pci 0000:00:01.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.276498] pci 0000:00:03.1: PCI bridge to [bus 0b]
[ 0.276499] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.276502] pci 0000:00:03.1: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.276505] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.276509] pci 0000:00:07.1: PCI bridge to [bus 0c]
[ 0.276511] pci 0000:00:07.1: bridge window [mem 0xf7800000-0xf7afffff]
[ 0.276515] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.276517] pci 0000:00:08.1: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.276523] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.276524] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.276526] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.276527] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.276528] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.276529] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfec2ffff window]
[ 0.276531] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[ 0.276532] pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.276534] pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
[ 0.276535] pci_bus 0000:02: resource 1 [mem 0xf6400000-0xf77fffff]
[ 0.276536] pci_bus 0000:02: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.276537] pci_bus 0000:03: resource 0 [io 0xd000-0xefff]
[ 0.276538] pci_bus 0000:03: resource 1 [mem 0xf6400000-0xf76fffff]
[ 0.276539] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.276541] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.276542] pci_bus 0000:06: resource 1 [mem 0xf7600000-0xf76fffff]
[ 0.276543] pci_bus 0000:06: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.276544] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
[ 0.276545] pci_bus 0000:08: resource 1 [mem 0xf6400000-0xf74fffff]
[ 0.276547] pci_bus 0000:0b: resource 0 [io 0xf000-0xffff]
[ 0.276548] pci_bus 0000:0b: resource 1 [mem 0xf5000000-0xf60fffff]
[ 0.276549] pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.276550] pci_bus 0000:0c: resource 1 [mem 0xf7800000-0xf7afffff]
[ 0.276551] pci_bus 0000:0d: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.276800] pci 0000:0b:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.276832] pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0
[ 0.276993] PCI: CLS 64 bytes, default 64
[ 0.277048] Trying to unpack rootfs image as initramfs...
[ 0.282086] Initialise system trusted keyrings
[ 0.282096] Key type blacklist registered
[ 0.282131] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.282138] zbud: loaded
[ 0.282214] fuse: init (API version 7.40)
[ 0.282273] integrity: Platform Keyring initialized
[ 0.282275] integrity: Machine keyring initialized
[ 0.293078] Key type asymmetric registered
[ 0.293080] Asymmetric key parser 'x509' registered
[ 0.293105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.293145] io scheduler mq-deadline registered
[ 0.293147] io scheduler kyber registered
[ 0.293159] io scheduler bfq registered
[ 0.294970] pcieport 0000:00:01.1: PME: Signaling with IRQ 25
[ 0.295047] pcieport 0000:00:01.1: AER: enabled with IRQ 25
[ 0.295543] pcieport 0000:00:01.3: PME: Signaling with IRQ 26
[ 0.295594] pcieport 0000:00:01.3: AER: enabled with IRQ 26
[ 0.295796] pcieport 0000:00:03.1: PME: Signaling with IRQ 27
[ 0.295856] pcieport 0000:00:03.1: AER: enabled with IRQ 27
[ 0.296384] pcieport 0000:00:07.1: PME: Signaling with IRQ 28
[ 0.296436] pcieport 0000:00:07.1: AER: enabled with IRQ 28
[ 0.296709] pcieport 0000:00:08.1: PME: Signaling with IRQ 30
[ 0.296760] pcieport 0000:00:08.1: AER: enabled with IRQ 30
[ 0.297600] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.297707] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.297727] ACPI: button: Power Button [PWRB]
[ 0.297751] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.300512] ACPI: button: Power Button [PWRF]
[ 0.300947] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.301163] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.302995] Non-volatile memory driver v1.3
[ 0.302996] Linux agpgart interface v0.103
[ 0.303032] ACPI: bus type drm_connector registered
[ 0.303496] ahci 0000:02:00.1: version 3.0
[ 0.303608] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[ 0.303643] ahci 0000:02:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.303646] ahci 0000:02:00.1: 4/8 ports implemented (port mask 0x33)
[ 0.303647] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.304042] scsi host0: ahci
[ 0.304125] scsi host1: ahci
[ 0.304213] scsi host2: ahci
[ 0.304281] scsi host3: ahci
[ 0.304350] scsi host4: ahci
[ 0.304418] scsi host5: ahci
[ 0.304514] scsi host6: ahci
[ 0.304584] scsi host7: ahci
[ 0.304609] ata1: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780100 irq 40 lpm-pol 3
[ 0.304612] ata2: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780180 irq 40 lpm-pol 3
[ 0.304613] ata3: DUMMY
[ 0.304614] ata4: DUMMY
[ 0.304615] ata5: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780300 irq 40 lpm-pol 3
[ 0.304617] ata6: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780380 irq 40 lpm-pol 3
[ 0.304618] ata7: DUMMY
[ 0.304618] ata8: DUMMY
[ 0.304749] ahci 0000:0d:00.2: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.304752] ahci 0000:0d:00.2: 2/2 ports implemented (port mask 0x3)
[ 0.304754] ahci 0000:0d:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs
[ 0.304933] scsi host8: ahci
[ 0.305021] scsi host9: ahci
[ 0.305047] ata9: SATA max UDMA/133 abar m4096@0xf7b08000 port 0xf7b08100 irq 42 lpm-pol 0
[ 0.305050] ata10: SATA max UDMA/133 abar m4096@0xf7b08000 port 0xf7b08180 irq 42 lpm-pol 0
[ 0.305127] usbcore: registered new interface driver usbserial_generic
[ 0.305131] usbserial: USB Serial support registered for generic
[ 0.305194] rtc_cmos 00:01: RTC can wake from S4
[ 0.305569] rtc_cmos 00:01: registered as rtc0
[ 0.305632] rtc_cmos 00:01: setting system clock to 2024-07-14T18:08:34 UTC (1720980514)
[ 0.305670] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.305702] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[ 0.305738] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.305856] Relocating firmware framebuffer to offset 0x0000000001000000[d] within [mem 0xf0000000-0xf1ffffff flags 0x14220c]
[ 0.305879] efifb: probing for efifb
[ 0.305889] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
[ 0.305890] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.305891] efifb: scrolling: redraw
[ 0.305892] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.305932] fbcon: Deferring console take-over
[ 0.305933] fb0: EFI VGA frame buffer device
[ 0.305954] hid: raw HID events driver (C) Jiri Kosina
[ 0.306017] drop_monitor: Initializing network drop monitor service
[ 0.306105] NET: Registered PF_INET6 protocol family
[ 0.313856] Freeing initrd memory: 8972K
[ 0.318014] Segment Routing with IPv6
[ 0.318017] RPL Segment Routing with IPv6
[ 0.318025] In-situ OAM (IOAM) with IPv6
[ 0.318047] NET: Registered PF_PACKET protocol family
[ 0.318383] microcode: Current revision: 0x08001137
[ 0.318446] IPI shorthand broadcast: enabled
[ 0.319872] sched_clock: Marking stable (319186347, 293470)->(324870445, -5390628)
[ 0.319957] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.319995] registered taskstats version 1
[ 0.320162] Loading compiled-in X.509 certificates
[ 0.322842] Loaded X.509 cert 'Build time autogenerated kernel key: 2ce73bf767cd6b37ac7b2e4f01ec460d66782ee8'
[ 0.325587] zswap: loaded using pool zstd/zsmalloc
[ 0.325871] Key type .fscrypt registered
[ 0.325873] Key type fscrypt-provisioning registered
[ 0.326748] PM: Magic number: 0:34:140
[ 0.326824] acpi device:11: hash matches
[ 0.329581] RAS: Correctable Errors collector initialized.
[ 0.340838] clk: Disabling unused clocks
[ 0.340842] PM: genpd: Disabling unused power domains
[ 0.619495] ata9: SATA link down (SStatus 0 SControl 300)
[ 0.621129] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.622830] ata10: SATA link down (SStatus 0 SControl 300)
[ 0.934466] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.249758] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.290301] tsc: Refined TSC clocksource calibration: 3493.437 MHz
[ 1.290303] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325b1901053, max_idle_ns: 440795306184 ns
[ 1.290316] clocksource: Switched to clocksource tsc
[ 1.563078] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.564387] Freeing unused decrypted memory: 2028K
[ 1.564815] Freeing unused kernel image (initmem) memory: 3420K
[ 1.564817] Write protecting the kernel read-only data: 32768k
[ 1.565068] Freeing unused kernel image (rodata/data gap) memory: 1076K
[ 1.608678] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.608682] rodata_test: all tests were successful
[ 1.608687] Run /init as init process
[ 1.608689] with arguments:
[ 1.608690] /init
[ 1.608691] with environment:
[ 1.608691] HOME=/
[ 1.608692] TERM=linux
[ 1.608693] BOOT_IMAGE=/boot/vmlinuz-linux
[ 1.642311] fbcon: Taking over console
[ 1.642429] Console: switching to colour frame buffer device 128x48
[ 1.741339] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.741349] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 1.755140] nvme nvme0: pci function 0000:01:00.0
[ 1.773108] nvme nvme0: 4/0/0 default/read/poll queues
[ 1.795691] nvme0n1: p1 p2 p3 p4 p5
[ 1.796680] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000010048000010
[ 1.796896] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.796900] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.796904] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.796956] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ 1.796958] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.796969] usb usb1: Product: xHCI Host Controller
[ 1.796971] usb usb1: Manufacturer: Linux 6.9.9-arch1-1 xhci-hcd
[ 1.796972] usb usb1: SerialNumber: 0000:02:00.0
[ 1.797103] hub 1-0:1.0: USB hub found
[ 1.797119] hub 1-0:1.0: 10 ports detected
[ 1.797428] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.797446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[ 1.797448] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.797449] usb usb2: Product: xHCI Host Controller
[ 1.797450] usb usb2: Manufacturer: Linux 6.9.9-arch1-1 xhci-hcd
[ 1.797451] usb usb2: SerialNumber: 0000:02:00.0
[ 1.797517] hub 2-0:1.0: USB hub found
[ 1.797525] hub 2-0:1.0: 4 ports detected
[ 1.797606] usb: port power management may be unreliable
[ 1.797753] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[ 1.797757] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3
[ 1.797846] xhci_hcd 0000:0c:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000010
[ 1.797950] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[ 1.797952] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4
[ 1.797954] xhci_hcd 0000:0c:00.3: Host supports USB 3.0 SuperSpeed
[ 1.797980] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ 1.797982] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.797983] usb usb3: Product: xHCI Host Controller
[ 1.797984] usb usb3: Manufacturer: Linux 6.9.9-arch1-1 xhci-hcd
[ 1.797985] usb usb3: SerialNumber: 0000:0c:00.3
[ 1.798061] hub 3-0:1.0: USB hub found
[ 1.798068] hub 3-0:1.0: 4 ports detected
[ 1.798230] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.798248] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09
[ 1.798249] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.798251] usb usb4: Product: xHCI Host Controller
[ 1.798252] usb usb4: Manufacturer: Linux 6.9.9-arch1-1 xhci-hcd
[ 1.798253] usb usb4: SerialNumber: 0000:0c:00.3
[ 1.798321] hub 4-0:1.0: USB hub found
[ 1.798328] hub 4-0:1.0: 4 ports detected
[ 1.902495] EXT4-fs (nvme0n1p2): mounted filesystem e317bc8b-4ecb-4d50-8a10-16c83daf75b3 r/w with ordered data mode. Quota mode: none.
[ 1.976830] systemd[1]: systemd 256.2-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[ 1.976836] systemd[1]: Detected architecture x86-64.
[ 1.977629] systemd[1]: Hostname set to <aquilonia>.
[ 2.053641] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 2.207632] usb 1-5: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 2.207636] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.207637] usb 1-5: Product: USB 2.0 Hub
[ 2.212642] hub 1-5:1.0: USB hub found
[ 2.215615] hub 1-5:1.0: 4 ports detected
[ 2.353630] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[ 2.516982] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 2.578997] systemd[1]: /usr/lib/systemd/system/shorewall6.service:17: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 2.580364] systemd[1]: /usr/lib/systemd/system/shorewall.service:16: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 2.641105] systemd[1]: Queued start job for default target Graphical Interface.
[ 2.684622] systemd[1]: Created slice Slice /system/dirmngr.
[ 2.685004] systemd[1]: Created slice Slice /system/getty.
[ 2.685326] systemd[1]: Created slice Slice /system/gpg-agent.
[ 2.685662] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 2.685998] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 2.686328] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 2.686671] systemd[1]: Created slice Slice /system/keyboxd.
[ 2.687025] systemd[1]: Created slice Slice /system/modprobe.
[ 2.687351] systemd[1]: Created slice Slice /system/netctl.
[ 2.687684] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 2.687920] systemd[1]: Created slice User and Session Slice.
[ 2.688034] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.688145] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.688353] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.688457] systemd[1]: Expecting device /dev/disk/by-uuid/0b65f5a0-93cf-4a0a-8a8f-f4bf9226f42c...
[ 2.688543] systemd[1]: Expecting device /dev/disk/by-uuid/239d593f-624d-4dea-9861-d6b13c23eb78...
[ 2.688623] systemd[1]: Expecting device /dev/disk/by-uuid/9607-240E...
[ 2.688687] systemd[1]: Expecting device /dev/disk/by-uuid/be771001-b8ee-4984-9a81-5e565c762a52...
[ 2.688768] systemd[1]: Expecting device /sys/subsystem/net/devices/enp6s0...
[ 2.688834] systemd[1]: Expecting device /sys/subsystem/net/devices/enp8s0f0...
[ 2.688904] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.688968] systemd[1]: Reached target Login Prompts.
[ 2.689025] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 2.689104] systemd[1]: Reached target Host and Network Name Lookups.
[ 2.689173] systemd[1]: Reached target Remote File Systems.
[ 2.689234] systemd[1]: Reached target Slice Units.
[ 2.689299] systemd[1]: Reached target Local Verity Protected Volumes.
[ 2.689433] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.689569] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.692449] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 2.692566] systemd[1]: Reached target RPC Port Mapper.
[ 2.693854] systemd[1]: Listening on Process Core Dump Socket.
[ 2.694589] systemd[1]: Listening on Credential Encryption/Decryption.
[ 2.694737] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.694866] systemd[1]: Listening on Journal Sockets.
[ 2.694948] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.694964] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.695034] systemd[1]: Listening on udev Control Socket.
[ 2.695132] systemd[1]: Listening on udev Kernel Socket.
[ 2.695891] systemd[1]: Mounting Huge Pages File System...
[ 2.696422] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.696986] systemd[1]: Mounting Kernel Debug File System...
[ 2.698718] systemd[1]: Mounting Kernel Trace File System...
[ 2.700471] systemd[1]: Starting Create List of Static Device Nodes...
[ 2.702135] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 2.702443] usb 1-6: New USB device found, idVendor=03f0, idProduct=4811, bcdDevice= 1.00
[ 2.702447] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.702448] usb 1-6: Product: PSC 1600 series
[ 2.702450] usb 1-6: Manufacturer: HP
[ 2.702451] usb 1-6: SerialNumber: MY584F13PVL0
[ 2.703311] systemd[1]: Starting Load Kernel Module configfs...
[ 2.705058] systemd[1]: Starting Load Kernel Module dm_mod...
[ 2.707032] systemd[1]: Starting Load Kernel Module drm...
[ 2.708859] systemd[1]: Starting Load Kernel Module fuse...
[ 2.713221] systemd[1]: Starting Load Kernel Module loop...
[ 2.714484] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 2.714532] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 2.715836] systemd[1]: Starting Journal Service...
[ 2.718132] systemd[1]: Starting Load Kernel Modules...
[ 2.720023] device-mapper: uevent: version 1.0.3
[ 2.720181] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 2.720519] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.721308] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.722991] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.723120] loop: module loaded
[ 2.724256] systemd[1]: Starting Load udev Rules from Credentials...
[ 2.727838] systemd[1]: Starting Coldplug All udev Devices...
[ 2.732873] systemd[1]: Mounted Huge Pages File System.
[ 2.735232] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.736569] systemd[1]: Mounted Kernel Debug File System.
[ 2.737912] systemd[1]: Mounted Kernel Trace File System.
[ 2.739369] systemd[1]: Finished Create List of Static Device Nodes.
[ 2.740896] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 2.741026] systemd[1]: Finished Load Kernel Module configfs.
[ 2.742466] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 2.742590] systemd[1]: Finished Load Kernel Module dm_mod.
[ 2.744003] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 2.744126] systemd[1]: Finished Load Kernel Module drm.
[ 2.745472] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 2.745596] systemd[1]: Finished Load Kernel Module fuse.
[ 2.746887] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 2.747243] systemd[1]: Finished Load Kernel Module loop.
[ 2.747490] EXT4-fs (nvme0n1p2): re-mounted e317bc8b-4ecb-4d50-8a10-16c83daf75b3 r/w. Quota mode: none.
[ 2.748844] systemd[1]: Finished Load udev Rules from Credentials.
[ 2.751264] systemd-journald[291]: Collecting audit messages is disabled.
[ 2.753954] systemd[1]: Mounting FUSE Control File System...
[ 2.762475] systemd[1]: Mounting Kernel Configuration File System...
[ 2.763617] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 2.767230] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 2.769001] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.770229] systemd[1]: Mounted FUSE Control File System.
[ 2.774194] systemd[1]: Mounted Kernel Configuration File System.
[ 2.775826] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 2.780307] usb 1-5.3: new full-speed USB device number 4 using xhci_hcd
[ 2.780350] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 2.793893] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[ 2.795254] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[ 2.797109] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.806994] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 2.808304] systemd[1]: Reached target Preparation for Local File Systems.
[ 2.810507] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 2.827476] systemd[1]: Finished Coldplug All udev Devices.
[ 2.846880] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ 2.935070] systemd[1]: Found device Samsung SSD 960 EVO 250GB swap.
[ 2.946376] systemd[1]: Found device Samsung SSD 960 EVO 250GB home.
[ 2.955474] systemd[1]: Found device Samsung SSD 960 EVO 250GB var.
[ 2.963219] systemd[1]: Found device Samsung SSD 960 EVO 250GB 1.
[ 2.966051] systemd[1]: Activating swap /dev/disk/by-uuid/239d593f-624d-4dea-9861-d6b13c23eb78...
[ 2.995524] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 2.996956] systemd[1]: Starting File System Check on /dev/disk/by-uuid/0b65f5a0-93cf-4a0a-8a8f-f4bf9226f42c...
[ 2.999508] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.999515] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 2.999602] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 2.999756] Adding 4194300k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:4194300k SS
[ 3.003746] systemd[1]: Starting File System Check on /dev/disk/by-uuid/9607-240E...
[ 3.007346] systemd[1]: Starting File System Check on /dev/disk/by-uuid/be771001-b8ee-4984-9a81-5e565c762a52...
[ 3.009321] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 3.009325] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.018033] ccp 0000:0c:00.2: enabling device (0000 -> 0002)
[ 3.019448] cryptd: max_cpu_qlen set to 1000
[ 3.024732] ccp 0000:0c:00.2: ccp enabled
[ 3.024736] ccp 0000:0c:00.2: psp: unable to access the device: you might be running a broken BIOS.
[ 3.025020] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 3.025095] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 3.025161] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 3.036912] systemd[1]: Activated swap /dev/disk/by-uuid/239d593f-624d-4dea-9861-d6b13c23eb78.
[ 3.040916] systemd[1]: Finished File System Check on /dev/disk/by-uuid/0b65f5a0-93cf-4a0a-8a8f-f4bf9226f42c.
[ 3.042491] systemd[1]: Reached target Swaps.
[ 3.043549] AVX2 version of gcm_enc/dec engaged.
[ 3.043927] AES CTR mode by8 optimization enabled
[ 3.060721] systemd[1]: Finished File System Check on /dev/disk/by-uuid/9607-240E.
[ 3.065543] systemd[1]: Finished File System Check on /dev/disk/by-uuid/be771001-b8ee-4984-9a81-5e565c762a52.
[ 3.147341] systemd[1]: Starting Virtual Console Setup...
[ 3.153816] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
[ 3.153974] systemd[1]: Stopped Virtual Console Setup.
[ 3.156365] systemd[1]: Starting Virtual Console Setup...
[ 3.168929] it87: Found IT8792E/IT8795E chip at 0xa60, revision 3
[ 3.183694] snd_hda_intel 0000:0b:00.1: Disabling MSI
[ 3.183705] snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client
[ 3.183801] snd_hda_intel 0000:0d:00.3: enabling device (0000 -> 0002)
[ 3.212467] systemd[1]: Finished Virtual Console Setup.
[ 3.221234] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input3
[ 3.221276] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input4
[ 3.221307] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input5
[ 3.221336] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input6
[ 3.232668] usb 1-5.3: New USB device found, idVendor=046d, idProduct=c318, bcdDevice=55.03
[ 3.232675] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.232677] usb 1-5.3: Product: Logitech Illuminated Keyboard
[ 3.232678] usb 1-5.3: Manufacturer: Logitech
[ 3.236285] AMD Address Translation Library initialized
[ 3.239289] intel_rapl_common: Found RAPL domain package
[ 3.239294] intel_rapl_common: Found RAPL domain core
[ 3.244938] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 3.244944] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.244946] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.244948] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.244949] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 3.244950] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.244952] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.244953] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.244954] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.250157] systemd[1]: Starting Load Kernel Module dm_mod...
[ 3.254494] systemd[1]: Starting Load Kernel Module loop...
[ 3.260395] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 3.260518] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 3.260722] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 3.260769] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 3.260820] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[ 3.260841] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 3.261900] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input7
[ 3.261940] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input8
[ 3.261972] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input9
[ 3.262221] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input10
[ 3.262257] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input11
[ 3.276131] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 3.276164] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 3.276245] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 3.276278] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 3.276321] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[ 3.276339] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 3.280656] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 3.280813] systemd[1]: Finished Load Kernel Module loop.
[ 3.282574] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 3.282712] systemd[1]: Finished Load Kernel Module dm_mod.
[ 3.284780] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 3.456983] usb 1-5.4: new low-speed USB device number 5 using xhci_hcd
[ 3.482539] nvidia: loading out-of-tree module taints kernel.
[ 3.482548] nvidia: module license 'NVIDIA' taints kernel.
[ 3.482549] Disabling lock debugging due to kernel taint
[ 3.482553] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 3.482554] nvidia: module license taints kernel.
[ 3.736965] systemd[1]: Mounting /boot/efi...
[ 3.739127] systemd[1]: Mounting /home...
[ 3.778139] systemd[1]: Mounting Temporary Directory /tmp...
[ 3.779663] systemd[1]: var.mount: Directory /var to mount over is not empty, mounting anyway.
[ 3.781029] systemd[1]: Mounting /var...
[ 3.785676] systemd[1]: Mounted Temporary Directory /tmp.
[ 3.786324] EXT4-fs (nvme0n1p5): mounted filesystem be771001-b8ee-4984-9a81-5e565c762a52 r/w with ordered data mode. Quota mode: none.
[ 3.788074] systemd[1]: Mounted /home.
[ 3.788673] EXT4-fs (nvme0n1p4): mounted filesystem 0b65f5a0-93cf-4a0a-8a8f-f4bf9226f42c r/w with ordered data mode. Quota mode: none.
[ 3.790623] systemd[1]: Mounted /var.
[ 3.792822] systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of an unmet condition check (ConditionPathExists=/var/lib/machines.raw).
[ 3.794010] systemd[1]: Starting RPC Bind...
[ 3.796125] systemd[1]: Starting Load/Save OS Random Seed...
[ 3.797615] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 3.808070] systemd[1]: Finished Load/Save OS Random Seed.
[ 3.819640] usb 1-5.4: New USB device found, idVendor=03f0, idProduct=0941, bcdDevice= 1.00
[ 3.819645] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.819647] usb 1-5.4: Product: HP X500 USB Optical Mouse
[ 3.819649] usb 1-5.4: Manufacturer: PixArt
[ 3.820530] systemd[1]: Started RPC Bind.
[ 3.834140] systemd[1]: Started Journal Service.
[ 3.860485] systemd-journald[291]: Received client request to flush runtime journal.
[ 3.939897] usb-storage 1-6:1.3: USB Mass Storage device detected
[ 3.940378] scsi host10: usb-storage 1-6:1.3
[ 3.940412] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[ 3.940680] usbcore: registered new interface driver usb-storage
[ 3.941924] nvidia 0000:0b:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.968222] usblp 1-6:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4811
[ 3.968261] usbcore: registered new interface driver usblp
[ 3.968340] usbcore: registered new interface driver uas
[ 3.989485] dca service started, version 1.12.1
[ 4.009259] pps_core: LinuxPPS API ver. 1 registered
[ 4.009264] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.013357] PTP clock support registered
[ 4.028437] igb: Intel(R) Gigabit Ethernet Network Driver
[ 4.028441] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 4.048726] r8169 0000:06:00.0 eth0: RTL8168g/8111g, e0:d5:5e:68:14:c5, XID 4c0, IRQ 68
[ 4.048732] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 4.057245] r8169 0000:06:00.0 enp6s0: renamed from eth0
[ 4.063128] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 555.58.02 Tue Jun 25 01:39:15 UTC 2024
[ 4.090809] usbcore: registered new interface driver usbhid
[ 4.090815] usbhid: USB HID core driver
[ 4.101581] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5.3/1-5.3:1.0/0003:046D:C318.0001/input/input12
[ 4.111092] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[ 4.112842] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 555.58.02 Tue Jun 25 01:10:21 UTC 2024
[ 4.157869] hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:02:00.0-5.3/input0
[ 4.158110] input: Logitech Logitech Illuminated Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5.3/1-5.3:1.1/0003:046D:C318.0002/input/input13
[ 4.213012] igb 0000:08:00.0: added PHC on eth0
[ 4.213049] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 4.213051] igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 80:61:5f:0a:2c:fc
[ 4.213135] igb 0000:08:00.0: eth0: PBA No: E43709-006
[ 4.213136] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 4.214440] hid-generic 0003:046D:C318.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:02:00.0-5.3/input1
[ 4.214553] input: PixArt HP X500 USB Optical Mouse as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5.4/1-5.4:1.0/0003:03F0:0941.0003/input/input15
[ 4.214592] hid-generic 0003:03F0:0941.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP X500 USB Optical Mouse] on usb-0000:02:00.0-5.4/input0
[ 4.285815] [drm] [nvidia-drm] [GPU ID 0x00000b00] Loading driver
[ 4.289716] nvidia-uvm: Loaded the UVM driver, major device number 235.
[ 4.301026] mousedev: PS/2 mouse device common for all mice
[ 4.399671] igb 0000:08:00.1: added PHC on eth1
[ 4.399709] igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 4.399710] igb 0000:08:00.1: eth1: (PCIe:2.5Gb/s:Width x1) 80:61:5f:0a:2c:fd
[ 4.399795] igb 0000:08:00.1: eth1: PBA No: E43709-006
[ 4.399796] igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 4.402544] igb 0000:08:00.1 enp8s0f1: renamed from eth1
[ 4.402783] igb 0000:08:00.0 enp8s0f0: renamed from eth0
[ 4.945875] scsi 10:0:0:0: Direct-Access HP PSC 1610 1.00 PQ: 0 ANSI: 2
[ 4.946848] sd 10:0:0:0: [sda] Media removed, stopped polling
[ 4.947044] sd 10:0:0:0: [sda] Attached SCSI removable disk
[ 5.076979] Generic FE-GE Realtek PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC)
[ 5.267052] r8169 0000:06:00.0 enp6s0: Link is Down
[ 5.356501] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:0b:00.0 on minor 0
[ 7.814235] igb 0000:08:00.0 enp8s0f0: igb: enp8s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 7.940020] r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 78.298531] tun: Universal TUN/TAP device driver, 1.6
[ 92.317516] OUTPUT REJECT IN= OUT=tun0 SRC=fde6:007a:7d20:1566:0000:0000:0000:10f0 DST=2600:1901:0000:38d7:0000:0000:0000:0000 LEN=80 TC=0 HOPLIMIT=64 FLOWLBL=126214 PROTO=TCP SPT=44798 DPT=80 WINDOW=64770 RES=0x00 SYN URGP=0
[ 92.646737] OUTPUT REJECT IN= OUT=tun0 SRC=fde6:007a:7d20:1566:0000:0000:0000:10f0 DST=2600:1901:0000:38d7:0000:0000:0000:0000 LEN=80 TC=0 HOPLIMIT=64 FLOWLBL=801456 PROTO=TCP SPT=44810 DPT=80 WINDOW=64770 RES=0x00 SYN URGP=0
[ 152.347257] OUTPUT REJECT IN= OUT=tun0 SRC=fde6:007a:7d20:1566:0000:0000:0000:10f0 DST=2600:1901:0000:38d7:0000:0000:0000:0000 LEN=80 TC=0 HOPLIMIT=64 FLOWLBL=909126 PROTO=TCP SPT=36982 DPT=80 WINDOW=64770 RES=0x00 SYN URGP=0
[-- Attachment #1.4: topo_cpus.txt --]
[-- Type: text/plain, Size: 1588 bytes --]
online: 1
initial_apicid: 0
apicid: 0
pkg_id: 0
die_id: 0
cu_id: 255
core_id: 0
logical_pkg_id: 0
logical_die_id: 0
llc_id: 0
l2c_id: 65535
amd_node_id: 0
amd_nodes_per_pkg: 1
num_threads: 4
num_cores: 4
max_dies_per_pkg: 1
max_threads_per_core:1
online: 1
initial_apicid: 1
apicid: 1
pkg_id: 0
die_id: 0
cu_id: 255
core_id: 1
logical_pkg_id: 0
logical_die_id: 0
llc_id: 0
l2c_id: 65535
amd_node_id: 0
amd_nodes_per_pkg: 1
num_threads: 4
num_cores: 4
max_dies_per_pkg: 1
max_threads_per_core:1
online: 1
initial_apicid: 8
apicid: 8
pkg_id: 0
die_id: 0
cu_id: 255
core_id: 8
logical_pkg_id: 0
logical_die_id: 0
llc_id: 1
l2c_id: 65535
amd_node_id: 0
amd_nodes_per_pkg: 1
num_threads: 4
num_cores: 4
max_dies_per_pkg: 1
max_threads_per_core:1
online: 1
initial_apicid: 9
apicid: 9
pkg_id: 0
die_id: 0
cu_id: 255
core_id: 9
logical_pkg_id: 0
logical_die_id: 0
llc_id: 1
l2c_id: 65535
amd_node_id: 0
amd_nodes_per_pkg: 1
num_threads: 4
num_cores: 4
max_dies_per_pkg: 1
max_threads_per_core:1
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-15 13:11 [REGRESSION][BISECTED] Early boot hangs since f0551af02130 Christian Heusel
@ 2024-07-23 11:42 ` Christian Heusel
2024-07-23 12:02 ` Borislav Petkov
1 sibling, 0 replies; 24+ messages in thread
From: Christian Heusel @ 2024-07-23 11:42 UTC (permalink / raw)
To: Thomas Gleixner, Borislav Petkov, regressions; +Cc: x86, rob
[-- Attachment #1: Type: text/plain, Size: 665 bytes --]
On 24/07/15 03:11PM, Christian Heusel wrote:
> Hello Thomas, hello Borislav,
>
> Rob reports a regression on his AMD Ryzen 3 1300X CPU that causes him
> early boot failures when he does not specify "iommu=off" on the command
> line.
>
> We have bisected the issue together [in the Arch Linux bugtracker][0]
> and landed on the following commit as the culprit of the failure:
>
> f0551af02130 ("x86/topology: Ignore non-present APIC IDs in a present package")
>
Just asking again, did anybody have a chance to look at the above report
so far? It has now been a week since it has initially been sent out :)
Cheers,
Chris
#regzbot poke
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-15 13:11 [REGRESSION][BISECTED] Early boot hangs since f0551af02130 Christian Heusel
2024-07-23 11:42 ` Christian Heusel
@ 2024-07-23 12:02 ` Borislav Petkov
2024-07-23 22:08 ` Christian Heusel
1 sibling, 1 reply; 24+ messages in thread
From: Borislav Petkov @ 2024-07-23 12:02 UTC (permalink / raw)
To: Christian Heusel; +Cc: Thomas Gleixner, regressions, x86, rob
On Mon, Jul 15, 2024 at 03:11:19PM +0200, Christian Heusel wrote:
> - output of "cpuid"
> - dmesg of a working boot
Send a full dmesg from 6.10 mainline - not some distro kernel, dunno what arch
has, perhaps same as mainline but still... - I guess with the patch reverted
as it doesn't boot otherwise, as you say.
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-23 12:02 ` Borislav Petkov
@ 2024-07-23 22:08 ` Christian Heusel
2024-07-25 10:50 ` Borislav Petkov
0 siblings, 1 reply; 24+ messages in thread
From: Christian Heusel @ 2024-07-23 22:08 UTC (permalink / raw)
To: Borislav Petkov; +Cc: Thomas Gleixner, regressions, x86, rob
[-- Attachment #1.1: Type: text/plain, Size: 818 bytes --]
On 24/07/23 02:02PM, Borislav Petkov wrote:
> On Mon, Jul 15, 2024 at 03:11:19PM +0200, Christian Heusel wrote:
> > - output of "cpuid"
> > - dmesg of a working boot
>
> Send a full dmesg from 6.10 mainline - not some distro kernel, dunno
> what arch has, perhaps same as mainline but still... - I guess with
> the patch reverted as it doesn't boot otherwise, as you say.
See the attached dmesg for a boot with the mainline kernel that has the
problematic patch reverted!
Regarding the Arch Kernel, we're using a minimal patchset of 3 or 4
patches, see i.e. the following release:
https://github.com/archlinux/linux/releases/tag/v6.9.9-arch1
Other releases are a bit more heavy, but mostly consist of additional
backports to fix issues before the next stable release.
> Thx.
Cheers,
Chris
[-- Attachment #1.2: dmesg.20240723.2246.txt --]
[-- Type: text/plain, Size: 81912 bytes --]
[ 0.000000] Linux version 6.10.0-rc7-1.1-mainline-dirty (linux-mainline@archlinux) (gcc (GCC) 14.1.1 20240522, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Sat, 13 Jul 2024 15:03:00 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-mainline root=UUID=e317bc8b-4ecb-4d50-8a10-16c83daf75b3 rw nvidia-drm.modeset=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000dbb65fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbb66000-0x00000000dbc62fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dbc63000-0x00000000dbcdffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dbce0000-0x00000000dc1effff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dc1f0000-0x00000000dcee7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dcee8000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f37ffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0xcebae018-0xcebbc057] usable ==> usable
[ 0.000000] e820: update [mem 0xceb7d018-0xcebad257] usable ==> usable
[ 0.000000] e820: update [mem 0xceb4c018-0xceb7c257] usable ==> usable
[ 0.000000] e820: update [mem 0xceb2c018-0xceb4b457] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009cfffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000000a20a000-0x000000000affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000ceb2c017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb2c018-0x00000000ceb4b457] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb4b458-0x00000000ceb4c017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb4c018-0x00000000ceb7c257] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb7c258-0x00000000ceb7d017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb7d018-0x00000000cebad257] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cebad258-0x00000000cebae017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cebae018-0x00000000cebbc057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cebbc058-0x00000000dbb65fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dbb66000-0x00000000dbc62fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dbc63000-0x00000000dbcdffff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000dbce0000-0x00000000dc1effff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000dc1f0000-0x00000000dcee7fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dcee8000-0x00000000deffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f37ffff] usable
[ 0.000000] efi: EFI v2.7 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xdc16f000 ACPI=0xdc16f000 SMBIOS=0xdcd1a000 SMBIOS 3.0=0xdcd19000 ESRT=0xda4d8798 MEMATTR=0xd7bcb018 INITRD=0xd2e47e98 RNG=0xdbcdf018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem35: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[ 0.000000] efi: Remove mem36: MMIO range=[0xfd100000-0xfdffffff] (15MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd100000-0xfdffffff] reserved
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
[ 0.000000] efi: Remove mem38: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
[ 0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] reserved
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem40: MMIO range=[0xfec30000-0xfec30fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem41: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem42: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
[ 0.000000] efi: Not removing mem43: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[ 0.000000] efi: Not removing mem44: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
[ 0.000000] efi: Not removing mem45: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
[ 0.000000] efi: Remove mem46: MMIO range=[0xfee00000-0xfeefffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfee00000-0xfeefffff] reserved
[ 0.000000] efi: Remove mem47: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. AB350M-D3V/AB350M-D3V-CF, BIOS F23 08/08/2018
[ 0.000000] DMI: Memory slots populated: 2/4
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3493.374 MHz processor
[ 0.000601] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000604] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000617] last_pfn = 0x21f380 max_arch_pfn = 0x400000000
[ 0.000624] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
[ 0.000626] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000857] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000866] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.004921] esrt: Reserving ESRT space from 0x00000000da4d8798 to 0x00000000da4d87d0.
[ 0.004927] e820: update [mem 0xda4d8000-0xda4d8fff] usable ==> reserved
[ 0.004946] Using GB pages for direct mapping
[ 0.006030] Secure boot disabled
[ 0.006031] RAMDISK: [mem 0xcebbd000-0xcf47ffff]
[ 0.006050] ACPI: Early table checksum verification disabled
[ 0.006053] ACPI: RSDP 0x00000000DC16F000 000024 (v02 ALASKA)
[ 0.006057] ACPI: XSDT 0x00000000DC16F098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006062] ACPI: FACP 0x00000000DC1761E8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.006066] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240322/tbfadt-611)
[ 0.006070] ACPI: DSDT 0x00000000DC16F1D8 00700F (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.006073] ACPI: FACS 0x00000000DC1D8E00 000040
[ 0.006076] ACPI: APIC 0x00000000DC176300 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.006079] ACPI: FPDT 0x00000000DC1763E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006082] ACPI: FIDT 0x00000000DC176428 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006085] ACPI: SSDT 0x00000000DC1764C8 008C98 (v02 ALASKA A M I 00000002 MSFT 04000000)
[ 0.006088] ACPI: CRAT 0x00000000DC17F160 000850 (v01 ALASKA A M I 00000001 AMD 00000001)
[ 0.006090] ACPI: CDIT 0x00000000DC17F9B0 000029 (v01 ALASKA A M I 00000001 AMD 00000001)
[ 0.006093] ACPI: SSDT 0x00000000DC17F9E0 002DBA (v01 ALASKA A M I 00000001 INTL 20120913)
[ 0.006096] ACPI: MCFG 0x00000000DC1827A0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.006099] ACPI: HPET 0x00000000DC1827E0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.006101] ACPI: SSDT 0x00000000DC182818 000024 (v01 ALASKA A M I 00001000 INTL 20120913)
[ 0.006104] ACPI: UEFI 0x00000000DC182840 000048 (v01 ALASKA A M I 00000000 00000000)
[ 0.006107] ACPI: BGRT 0x00000000DC182888 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006110] ACPI: IVRS 0x00000000DC1828C0 0000D0 (v02 ALASKA A M I 00000001 AMD 00000000)
[ 0.006113] ACPI: SSDT 0x00000000DC182990 001A41 (v01 ALASKA A M I 00000001 INTL 20120913)
[ 0.006115] ACPI: SSDT 0x00000000DC1843D8 0000F8 (v01 ALASKA A M I 00001000 INTL 20120913)
[ 0.006118] ACPI: WSMT 0x00000000DC1844D0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006121] ACPI: Reserving FACP table memory at [mem 0xdc1761e8-0xdc1762fb]
[ 0.006122] ACPI: Reserving DSDT table memory at [mem 0xdc16f1d8-0xdc1761e6]
[ 0.006123] ACPI: Reserving FACS table memory at [mem 0xdc1d8e00-0xdc1d8e3f]
[ 0.006124] ACPI: Reserving APIC table memory at [mem 0xdc176300-0xdc1763dd]
[ 0.006125] ACPI: Reserving FPDT table memory at [mem 0xdc1763e0-0xdc176423]
[ 0.006126] ACPI: Reserving FIDT table memory at [mem 0xdc176428-0xdc1764c3]
[ 0.006127] ACPI: Reserving SSDT table memory at [mem 0xdc1764c8-0xdc17f15f]
[ 0.006128] ACPI: Reserving CRAT table memory at [mem 0xdc17f160-0xdc17f9af]
[ 0.006129] ACPI: Reserving CDIT table memory at [mem 0xdc17f9b0-0xdc17f9d8]
[ 0.006130] ACPI: Reserving SSDT table memory at [mem 0xdc17f9e0-0xdc182799]
[ 0.006130] ACPI: Reserving MCFG table memory at [mem 0xdc1827a0-0xdc1827db]
[ 0.006131] ACPI: Reserving HPET table memory at [mem 0xdc1827e0-0xdc182817]
[ 0.006132] ACPI: Reserving SSDT table memory at [mem 0xdc182818-0xdc18283b]
[ 0.006133] ACPI: Reserving UEFI table memory at [mem 0xdc182840-0xdc182887]
[ 0.006134] ACPI: Reserving BGRT table memory at [mem 0xdc182888-0xdc1828bf]
[ 0.006135] ACPI: Reserving IVRS table memory at [mem 0xdc1828c0-0xdc18298f]
[ 0.006136] ACPI: Reserving SSDT table memory at [mem 0xdc182990-0xdc1843d0]
[ 0.006137] ACPI: Reserving SSDT table memory at [mem 0xdc1843d8-0xdc1844cf]
[ 0.006137] ACPI: Reserving WSMT table memory at [mem 0xdc1844d0-0xdc1844f7]
[ 0.006221] No NUMA configuration found
[ 0.006222] Faking a node at [mem 0x0000000000000000-0x000000021f37ffff]
[ 0.006225] NODE_DATA(0) allocated [mem 0x21f37b000-0x21f37ffff]
[ 0.006251] Zone ranges:
[ 0.006252] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.006253] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.006255] Normal [mem 0x0000000100000000-0x000000021f37ffff]
[ 0.006256] Device empty
[ 0.006257] Movable zone start for each node
[ 0.006258] Early memory node ranges
[ 0.006258] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.006260] node 0: [mem 0x0000000000100000-0x0000000009cfffff]
[ 0.006261] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.006262] node 0: [mem 0x000000000a20a000-0x000000000affffff]
[ 0.006262] node 0: [mem 0x000000000b020000-0x00000000dbb65fff]
[ 0.006264] node 0: [mem 0x00000000dcee8000-0x00000000deffffff]
[ 0.006265] node 0: [mem 0x0000000100000000-0x000000021f37ffff]
[ 0.006266] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f37ffff]
[ 0.006272] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.006296] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.006508] On node 0, zone DMA32: 768 pages in unavailable ranges
[ 0.006530] On node 0, zone DMA32: 10 pages in unavailable ranges
[ 0.014536] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.014680] On node 0, zone DMA32: 4994 pages in unavailable ranges
[ 0.025954] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.026000] On node 0, zone Normal: 3200 pages in unavailable ranges
[ 0.026435] ACPI: PM-Timer IO Port: 0x808
[ 0.026444] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.026462] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.026467] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.026469] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.026470] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.026474] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.026476] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.026486] e820: update [mem 0xd8135000-0xd8179fff] usable ==> reserved
[ 0.026508] CPU topo: Max. logical packages: 1
[ 0.026509] CPU topo: Max. logical dies: 1
[ 0.026509] CPU topo: Max. dies per package: 1
[ 0.026513] CPU topo: Max. threads per core: 1
[ 0.026515] CPU topo: Num. cores per package: 4
[ 0.026515] CPU topo: Num. threads per package: 4
[ 0.026516] CPU topo: Allowing 4 present CPUs plus 12 hotplug CPUs
[ 0.026540] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.026542] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.026544] PM: hibernation: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
[ 0.026546] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
[ 0.026547] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.026549] PM: hibernation: Registered nosave memory: [mem 0xceb2c000-0xceb2cfff]
[ 0.026551] PM: hibernation: Registered nosave memory: [mem 0xceb4b000-0xceb4bfff]
[ 0.026551] PM: hibernation: Registered nosave memory: [mem 0xceb4c000-0xceb4cfff]
[ 0.026553] PM: hibernation: Registered nosave memory: [mem 0xceb7c000-0xceb7cfff]
[ 0.026554] PM: hibernation: Registered nosave memory: [mem 0xceb7d000-0xceb7dfff]
[ 0.026555] PM: hibernation: Registered nosave memory: [mem 0xcebad000-0xcebadfff]
[ 0.026556] PM: hibernation: Registered nosave memory: [mem 0xcebae000-0xcebaefff]
[ 0.026558] PM: hibernation: Registered nosave memory: [mem 0xcebbc000-0xcebbcfff]
[ 0.026560] PM: hibernation: Registered nosave memory: [mem 0xd8135000-0xd8179fff]
[ 0.026561] PM: hibernation: Registered nosave memory: [mem 0xda4d8000-0xda4d8fff]
[ 0.026563] PM: hibernation: Registered nosave memory: [mem 0xdbb66000-0xdbc62fff]
[ 0.026564] PM: hibernation: Registered nosave memory: [mem 0xdbc63000-0xdbcdffff]
[ 0.026565] PM: hibernation: Registered nosave memory: [mem 0xdbce0000-0xdc1effff]
[ 0.026566] PM: hibernation: Registered nosave memory: [mem 0xdc1f0000-0xdcee7fff]
[ 0.026567] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[ 0.026568] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xfe9fffff]
[ 0.026569] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.026570] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfec0ffff]
[ 0.026570] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.026571] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.026572] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.026573] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.026573] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.026574] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.026575] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.026576] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.026576] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.026577] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.026578] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.026579] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.026580] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.026580] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xffffffff]
[ 0.026582] [mem 0xe0000000-0xfe9fffff] available for PCI devices
[ 0.026583] Booting paravirtualized kernel on bare hardware
[ 0.026586] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.031929] setup_percpu: NR_CPUS:320 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.033359] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[ 0.033370] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[ 0.033372] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
[ 0.033378] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
[ 0.033403] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-mainline root=UUID=e317bc8b-4ecb-4d50-8a10-16c83daf75b3 rw nvidia-drm.modeset=1
[ 0.033458] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-mainline", will be passed to user space.
[ 0.034532] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.035065] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.035183] Fallback order for Node 0: 0
[ 0.035191] Built 1 zonelists, mobility grouping on. Total pages: 2083955
[ 0.035192] Policy zone: Normal
[ 0.035513] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.035581] software IO TLB: area num 16.
[ 0.070979] Memory: 8006796K/8335820K available (18432K kernel code, 2177K rwdata, 13400K rodata, 3428K init, 3572K bss, 328764K reserved, 0K cma-reserved)
[ 0.071200] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.071254] ftrace: allocating 50089 entries in 196 pages
[ 0.078888] ftrace: allocated 196 pages with 3 groups
[ 0.078981] Dynamic Preempt: full
[ 0.079052] rcu: Preemptible hierarchical RCU implementation.
[ 0.079053] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[ 0.079054] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.079055] Trampoline variant of Tasks RCU enabled.
[ 0.079056] Rude variant of Tasks RCU enabled.
[ 0.079056] Tracing variant of Tasks RCU enabled.
[ 0.079057] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.079058] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.079070] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.079072] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.079074] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[ 0.082914] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[ 0.083125] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.083263] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.083300] Console: colour dummy device 80x25
[ 0.083303] printk: legacy console [tty0] enabled
[ 0.083350] ACPI: Core revision 20240322
[ 0.083468] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.083496] APIC: Switch to symmetric I/O mode setup
[ 0.084742] AMD-Vi: Using global IVHD EFR:0xf77ef22294ada, EFR2:0x0
[ 0.085076] APIC: Switched APIC routing to: physical flat
[ 0.085863] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.100163] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325add93063, max_idle_ns: 440795205842 ns
[ 0.100168] Calibrating delay loop (skipped), value calculated using timer frequency.. 6989.86 BogoMIPS (lpj=11644580)
[ 0.100179] AMD Zen1 DIV0 bug detected. Disable SMT for full protection.
[ 0.100181] SVM disabled (by BIOS) in MSR_VM_CR
[ 0.100211] LVT offset 1 assigned for vector 0xf9
[ 0.100277] LVT offset 2 assigned for vector 0xf4
[ 0.100293] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.100294] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.100298] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.100300] Spectre V2 : Mitigation: Retpolines
[ 0.100301] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.100301] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.100302] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.100303] RETBleed: Mitigation: untrained return thunk
[ 0.100304] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.100306] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.100310] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.100312] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.100312] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.100314] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.100315] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.118808] Freeing SMP alternatives memory: 40K
[ 0.118811] pid_max: default: 32768 minimum: 301
[ 0.120201] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[ 0.120225] landlock: Up and running.
[ 0.120226] Yama: becoming mindful.
[ 0.120231] LSM support for eBPF active
[ 0.120261] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.120274] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.227718] smpboot: CPU0: AMD Ryzen 3 1300X Quad-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[ 0.227903] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.227908] ... version: 0
[ 0.227909] ... bit width: 48
[ 0.227909] ... generic registers: 6
[ 0.227910] ... value mask: 0000ffffffffffff
[ 0.227911] ... max period: 00007fffffffffff
[ 0.227912] ... fixed-purpose events: 0
[ 0.227912] ... event mask: 000000000000003f
[ 0.227994] signal: max sigframe size: 1776
[ 0.228020] rcu: Hierarchical SRCU implementation.
[ 0.228021] rcu: Max phase no-delay instances is 1000.
[ 0.230165] MCE: In-kernel MCE decoding enabled.
[ 0.230165] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.230165] smp: Bringing up secondary CPUs ...
[ 0.230165] smpboot: x86: Booting SMP configuration:
[ 0.230165] .... node #0, CPUs: #1 #2 #3
[ 0.235501] smp: Brought up 1 node, 4 CPUs
[ 0.235501] smpboot: Total of 4 processors activated (27958.45 BogoMIPS)
[ 0.237024] devtmpfs: initialized
[ 0.237024] x86/mm: Memory block size: 128MB
[ 0.237484] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
[ 0.237484] ACPI: PM: Registering ACPI NVS region [mem 0xdbce0000-0xdc1effff] (5308416 bytes)
[ 0.237484] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.237484] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.237484] pinctrl core: initialized pinctrl subsystem
[ 0.237484] PM: RTC time: 21:44:34, date: 2024-07-23
[ 0.237552] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.237762] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.237867] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.237983] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.237996] audit: initializing netlink subsys (disabled)
[ 0.238090] audit: type=2000 audit(1721771074.153:1): state=initialized audit_enabled=0 res=1
[ 0.238182] thermal_sys: Registered thermal governor 'fair_share'
[ 0.238184] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.238185] thermal_sys: Registered thermal governor 'step_wise'
[ 0.238186] thermal_sys: Registered thermal governor 'user_space'
[ 0.238187] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.238198] cpuidle: using governor ladder
[ 0.238201] cpuidle: using governor menu
[ 0.238234] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.238234] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[ 0.238234] PCI: Using configuration type 1 for base access
[ 0.238234] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.243552] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.243554] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.243555] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.243556] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.243627] Demotion targets for Node 0: null
[ 0.243906] ACPI: Added _OSI(Module Device)
[ 0.243907] ACPI: Added _OSI(Processor Device)
[ 0.243908] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.243909] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.254805] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.255480] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.258393] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.258788] ACPI: Interpreter enabled
[ 0.258802] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.258804] ACPI: Using IOAPIC for interrupt routing
[ 0.259547] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.259548] PCI: Using E820 reservations for host bridge windows
[ 0.259779] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.267805] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.267812] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.267895] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[ 0.268044] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.268054] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.268435] PCI host bridge to bus 0000:00
[ 0.268437] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.268439] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.268441] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.268442] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.268443] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.268445] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[ 0.268446] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.268447] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.268460] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 conventional PCI endpoint
[ 0.268539] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 conventional PCI endpoint
[ 0.268624] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.268673] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400 PCIe Root Port
[ 0.268687] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.268692] pci 0000:00:01.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.268955] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.269131] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 PCIe Root Port
[ 0.269145] pci 0000:00:01.3: PCI bridge to [bus 02-0a]
[ 0.269148] pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
[ 0.269150] pci 0000:00:01.3: bridge window [mem 0xf6400000-0xf77fffff]
[ 0.269156] pci 0000:00:01.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.269237] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[ 0.269442] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.269505] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.269555] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 PCIe Root Port
[ 0.269573] pci 0000:00:03.1: PCI bridge to [bus 0b]
[ 0.269578] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.269580] pci 0000:00:03.1: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.269587] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.269997] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.270201] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.270268] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.270317] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 PCIe Root Port
[ 0.270330] pci 0000:00:07.1: PCI bridge to [bus 0c]
[ 0.270334] pci 0000:00:07.1: bridge window [mem 0xf7800000-0xf7afffff]
[ 0.270351] pci 0000:00:07.1: enabling Extended Tags
[ 0.270417] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.270596] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.270645] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 PCIe Root Port
[ 0.270659] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.270664] pci 0000:00:08.1: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.270889] pci 0000:00:08.1: enabling Extended Tags
[ 0.270958] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.271166] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.271374] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.271589] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 conventional PCI endpoint
[ 0.271624] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 conventional PCI endpoint
[ 0.271657] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 conventional PCI endpoint
[ 0.271692] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 conventional PCI endpoint
[ 0.271724] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 conventional PCI endpoint
[ 0.271757] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 conventional PCI endpoint
[ 0.271789] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 conventional PCI endpoint
[ 0.271823] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 conventional PCI endpoint
[ 0.271941] pci 0000:01:00.0: [144d:a804] type 00 class 0x010802 PCIe Endpoint
[ 0.271956] pci 0000:01:00.0: BAR 0 [mem 0xf7c00000-0xf7c03fff 64bit]
[ 0.272157] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.272232] pci 0000:02:00.0: [1022:43bb] type 00 class 0x0c0330 PCIe Legacy Endpoint
[ 0.272247] pci 0000:02:00.0: BAR 0 [mem 0xf77a0000-0xf77a7fff 64bit]
[ 0.272330] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.272473] pci 0000:02:00.1: [1022:43b7] type 00 class 0x010601 PCIe Legacy Endpoint
[ 0.272514] pci 0000:02:00.1: BAR 5 [mem 0xf7780000-0xf779ffff]
[ 0.272521] pci 0000:02:00.1: ROM [mem 0xf7700000-0xf777ffff pref]
[ 0.272561] pci 0000:02:00.1: PME# supported from D3hot D3cold
[ 0.272644] pci 0000:02:00.2: [1022:43b2] type 01 class 0x060400 PCIe Switch Upstream Port
[ 0.272668] pci 0000:02:00.2: PCI bridge to [bus 03-0a]
[ 0.272674] pci 0000:02:00.2: bridge window [io 0xd000-0xefff]
[ 0.272677] pci 0000:02:00.2: bridge window [mem 0xf6400000-0xf76fffff]
[ 0.272685] pci 0000:02:00.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.272735] pci 0000:02:00.2: PME# supported from D3hot D3cold
[ 0.272837] pci 0000:00:01.3: PCI bridge to [bus 02-0a]
[ 0.272922] pci 0000:03:00.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.272949] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.273028] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.273135] pci 0000:03:01.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.273162] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.273241] pci 0000:03:01.0: PME# supported from D3hot D3cold
[ 0.273348] pci 0000:03:04.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.273374] pci 0000:03:04.0: PCI bridge to [bus 06]
[ 0.273379] pci 0000:03:04.0: bridge window [io 0xe000-0xefff]
[ 0.273382] pci 0000:03:04.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 0.273391] pci 0000:03:04.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.273456] pci 0000:03:04.0: PME# supported from D3hot D3cold
[ 0.273564] pci 0000:03:05.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.273590] pci 0000:03:05.0: PCI bridge to [bus 07]
[ 0.273670] pci 0000:03:05.0: PME# supported from D3hot D3cold
[ 0.273774] pci 0000:03:06.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.273800] pci 0000:03:06.0: PCI bridge to [bus 08-09]
[ 0.273805] pci 0000:03:06.0: bridge window [io 0xd000-0xdfff]
[ 0.273808] pci 0000:03:06.0: bridge window [mem 0xf6400000-0xf74fffff]
[ 0.273881] pci 0000:03:06.0: PME# supported from D3hot D3cold
[ 0.273986] pci 0000:03:07.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.274011] pci 0000:03:07.0: PCI bridge to [bus 0a]
[ 0.274090] pci 0000:03:07.0: PME# supported from D3hot D3cold
[ 0.274203] pci 0000:02:00.2: PCI bridge to [bus 03-0a]
[ 0.274240] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.274286] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.274358] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[ 0.274384] pci 0000:06:00.0: BAR 0 [io 0xe000-0xe0ff]
[ 0.274419] pci 0000:06:00.0: BAR 2 [mem 0xf7600000-0xf7600fff 64bit]
[ 0.274441] pci 0000:06:00.0: BAR 4 [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.274588] pci 0000:06:00.0: supports D1 D2
[ 0.274589] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274797] pci 0000:03:04.0: PCI bridge to [bus 06]
[ 0.274836] pci 0000:03:05.0: PCI bridge to [bus 07]
[ 0.274927] pci 0000:08:00.0: [8086:10c9] type 00 class 0x020000 PCIe Endpoint
[ 0.274963] pci 0000:08:00.0: BAR 0 [mem 0xf7420000-0xf743ffff]
[ 0.274982] pci 0000:08:00.0: BAR 1 [mem 0xf7000000-0xf73fffff]
[ 0.275002] pci 0000:08:00.0: BAR 2 [io 0xd020-0xd03f]
[ 0.275022] pci 0000:08:00.0: BAR 3 [mem 0xf74c4000-0xf74c7fff]
[ 0.275078] pci 0000:08:00.0: ROM [mem 0xf6c00000-0xf6ffffff pref]
[ 0.275249] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.275326] pci 0000:08:00.0: VF BAR 0 [mem 0xf74a0000-0xf74a3fff 64bit]
[ 0.275327] pci 0000:08:00.0: VF BAR 0 [mem 0xf74a0000-0xf74bffff 64bit]: contains BAR 0 for 8 VFs
[ 0.275375] pci 0000:08:00.0: VF BAR 3 [mem 0xf7480000-0xf7483fff 64bit]
[ 0.275376] pci 0000:08:00.0: VF BAR 3 [mem 0xf7480000-0xf749ffff 64bit]: contains BAR 3 for 8 VFs
[ 0.275575] pci 0000:08:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:03:06.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 0.275731] pci 0000:08:00.1: [8086:10c9] type 00 class 0x020000 PCIe Endpoint
[ 0.275767] pci 0000:08:00.1: BAR 0 [mem 0xf7400000-0xf741ffff]
[ 0.275787] pci 0000:08:00.1: BAR 1 [mem 0xf6800000-0xf6bfffff]
[ 0.275806] pci 0000:08:00.1: BAR 2 [io 0xd000-0xd01f]
[ 0.275825] pci 0000:08:00.1: BAR 3 [mem 0xf74c0000-0xf74c3fff]
[ 0.275882] pci 0000:08:00.1: ROM [mem 0xf6400000-0xf67fffff pref]
[ 0.276053] pci 0000:08:00.1: PME# supported from D0 D3hot D3cold
[ 0.276129] pci 0000:08:00.1: VF BAR 0 [mem 0xf7460000-0xf7463fff 64bit]
[ 0.276130] pci 0000:08:00.1: VF BAR 0 [mem 0xf7460000-0xf747ffff 64bit]: contains BAR 0 for 8 VFs
[ 0.276178] pci 0000:08:00.1: VF BAR 3 [mem 0xf7440000-0xf7443fff 64bit]
[ 0.276179] pci 0000:08:00.1: VF BAR 3 [mem 0xf7440000-0xf745ffff 64bit]: contains BAR 3 for 8 VFs
[ 0.276520] pci 0000:03:06.0: PCI bridge to [bus 08-09]
[ 0.276560] pci 0000:03:07.0: PCI bridge to [bus 0a]
[ 0.276889] pci 0000:0b:00.0: [10de:1d01] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.276906] pci 0000:0b:00.0: BAR 0 [mem 0xf5000000-0xf5ffffff]
[ 0.276920] pci 0000:0b:00.0: BAR 1 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.276933] pci 0000:0b:00.0: BAR 3 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.276943] pci 0000:0b:00.0: BAR 5 [io 0xf000-0xf07f]
[ 0.276952] pci 0000:0b:00.0: ROM [mem 0xf6000000-0xf607ffff pref]
[ 0.276986] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.277123] pci 0000:0b:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:03.1 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 0.277214] pci 0000:0b:00.1: [10de:0fb8] type 00 class 0x040300 PCIe Endpoint
[ 0.277231] pci 0000:0b:00.1: BAR 0 [mem 0xf6080000-0xf6083fff]
[ 0.277423] pci 0000:00:03.1: PCI bridge to [bus 0b]
[ 0.277491] pci 0000:0c:00.0: [1022:145a] type 00 class 0x130000 PCIe Endpoint
[ 0.277513] pci 0000:0c:00.0: enabling Extended Tags
[ 0.277599] pci 0000:0c:00.2: [1022:1456] type 00 class 0x108000 PCIe Endpoint
[ 0.277611] pci 0000:0c:00.2: BAR 2 [mem 0xf7900000-0xf79fffff]
[ 0.277619] pci 0000:0c:00.2: BAR 5 [mem 0xf7a00000-0xf7a01fff]
[ 0.277625] pci 0000:0c:00.2: enabling Extended Tags
[ 0.277723] pci 0000:0c:00.3: [1022:145c] type 00 class 0x0c0330 PCIe Endpoint
[ 0.277733] pci 0000:0c:00.3: BAR 0 [mem 0xf7800000-0xf78fffff 64bit]
[ 0.277752] pci 0000:0c:00.3: enabling Extended Tags
[ 0.277780] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
[ 0.277863] pci 0000:00:07.1: PCI bridge to [bus 0c]
[ 0.277936] pci 0000:0d:00.0: [1022:1455] type 00 class 0x130000 PCIe Endpoint
[ 0.277960] pci 0000:0d:00.0: enabling Extended Tags
[ 0.278056] pci 0000:0d:00.2: [1022:7901] type 00 class 0x010601 PCIe Endpoint
[ 0.278081] pci 0000:0d:00.2: BAR 5 [mem 0xf7b08000-0xf7b08fff]
[ 0.278088] pci 0000:0d:00.2: enabling Extended Tags
[ 0.278119] pci 0000:0d:00.2: PME# supported from D3hot D3cold
[ 0.278193] pci 0000:0d:00.3: [1022:1457] type 00 class 0x040300 PCIe Endpoint
[ 0.278200] pci 0000:0d:00.3: BAR 0 [mem 0xf7b00000-0xf7b07fff]
[ 0.278218] pci 0000:0d:00.3: enabling Extended Tags
[ 0.278248] pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold
[ 0.278328] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.278712] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.278764] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.278808] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.278864] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.278915] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.278956] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.278996] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.279037] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.279576] iommu: Default domain type: Translated
[ 0.279577] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.279692] SCSI subsystem initialized
[ 0.279715] libata version 3.00 loaded.
[ 0.279715] ACPI: bus type USB registered
[ 0.279715] usbcore: registered new interface driver usbfs
[ 0.279715] usbcore: registered new interface driver hub
[ 0.279715] usbcore: registered new device driver usb
[ 0.279715] EDAC MC: Ver: 3.0.0
[ 0.279715] efivars: Registered efivars operations
[ 0.280346] NetLabel: Initializing
[ 0.280348] NetLabel: domain hash size = 128
[ 0.280348] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.280361] NetLabel: unlabeled traffic allowed by default
[ 0.280364] mctp: management component transport protocol core
[ 0.280365] NET: Registered PF_MCTP protocol family
[ 0.280369] PCI: Using ACPI for IRQ routing
[ 0.284480] PCI: pci_cache_line_size set to 64 bytes
[ 0.284556] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[ 0.284558] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.284559] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.284560] e820: reserve RAM buffer [mem 0xceb2c018-0xcfffffff]
[ 0.284561] e820: reserve RAM buffer [mem 0xceb4c018-0xcfffffff]
[ 0.284562] e820: reserve RAM buffer [mem 0xceb7d018-0xcfffffff]
[ 0.284563] e820: reserve RAM buffer [mem 0xcebae018-0xcfffffff]
[ 0.284564] e820: reserve RAM buffer [mem 0xd8135000-0xdbffffff]
[ 0.284565] e820: reserve RAM buffer [mem 0xda4d8000-0xdbffffff]
[ 0.284566] e820: reserve RAM buffer [mem 0xdbb66000-0xdbffffff]
[ 0.284567] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.284567] e820: reserve RAM buffer [mem 0x21f380000-0x21fffffff]
[ 0.284610] pci 0000:0b:00.0: vgaarb: setting as boot VGA device
[ 0.284610] pci 0000:0b:00.0: vgaarb: bridge control possible
[ 0.284610] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.284610] vgaarb: loaded
[ 0.284610] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.284610] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.285618] clocksource: Switched to clocksource tsc-early
[ 0.285652] VFS: Disk quotas dquot_6.6.0
[ 0.285652] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.285652] pnp: PnP ACPI init
[ 0.285652] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.285652] system 00:02: [io 0x0a00-0x0a2f] has been reserved
[ 0.285652] system 00:02: [io 0x0a30-0x0a3f] has been reserved
[ 0.285652] system 00:02: [io 0x0a40-0x0a4f] has been reserved
[ 0.285652] pnp 00:03: [dma 0 disabled]
[ 0.285652] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.285652] system 00:04: [io 0x040b] has been reserved
[ 0.285652] system 00:04: [io 0x04d6] has been reserved
[ 0.285652] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.285652] system 00:04: [io 0x0c14] has been reserved
[ 0.285652] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.285652] system 00:04: [io 0x0c52] has been reserved
[ 0.285652] system 00:04: [io 0x0c6c] has been reserved
[ 0.285652] system 00:04: [io 0x0c6f] has been reserved
[ 0.285652] system 00:04: [io 0x0cd0-0x0cd1] has been reserved
[ 0.285652] system 00:04: [io 0x0cd2-0x0cd3] has been reserved
[ 0.285652] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.285652] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.285652] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.285652] system 00:04: [io 0x0800-0x089f] has been reserved
[ 0.285652] system 00:04: [io 0x0b00-0x0b0f] has been reserved
[ 0.285652] system 00:04: [io 0x0b20-0x0b3f] has been reserved
[ 0.285652] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.285652] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.285652] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.285652] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.285652] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.285652] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.285652] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.285652] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.285652] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.285652] pnp: PnP ACPI: found 5 devices
[ 0.290820] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.290868] NET: Registered PF_INET protocol family
[ 0.290964] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.302737] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.302766] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.302803] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.302987] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.303099] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.303178] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.303208] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.303230] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.303281] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.303288] NET: Registered PF_XDP protocol family
[ 0.303309] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.303314] pci 0000:00:01.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.303321] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.303330] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.303339] pci 0000:03:04.0: PCI bridge to [bus 06]
[ 0.303342] pci 0000:03:04.0: bridge window [io 0xe000-0xefff]
[ 0.303346] pci 0000:03:04.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 0.303349] pci 0000:03:04.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.303354] pci 0000:03:05.0: PCI bridge to [bus 07]
[ 0.303363] pci 0000:03:06.0: PCI bridge to [bus 08-09]
[ 0.303365] pci 0000:03:06.0: bridge window [io 0xd000-0xdfff]
[ 0.303369] pci 0000:03:06.0: bridge window [mem 0xf6400000-0xf74fffff]
[ 0.303375] pci 0000:03:07.0: PCI bridge to [bus 0a]
[ 0.303384] pci 0000:02:00.2: PCI bridge to [bus 03-0a]
[ 0.303386] pci 0000:02:00.2: bridge window [io 0xd000-0xefff]
[ 0.303390] pci 0000:02:00.2: bridge window [mem 0xf6400000-0xf76fffff]
[ 0.303392] pci 0000:02:00.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.303397] pci 0000:00:01.3: PCI bridge to [bus 02-0a]
[ 0.303398] pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
[ 0.303401] pci 0000:00:01.3: bridge window [mem 0xf6400000-0xf77fffff]
[ 0.303403] pci 0000:00:01.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.303407] pci 0000:00:03.1: PCI bridge to [bus 0b]
[ 0.303409] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.303412] pci 0000:00:03.1: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.303414] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.303419] pci 0000:00:07.1: PCI bridge to [bus 0c]
[ 0.303421] pci 0000:00:07.1: bridge window [mem 0xf7800000-0xf7afffff]
[ 0.303425] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.303427] pci 0000:00:08.1: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.303433] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.303434] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.303436] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.303437] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.303438] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.303439] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfec2ffff window]
[ 0.303440] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[ 0.303442] pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.303443] pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
[ 0.303444] pci_bus 0000:02: resource 1 [mem 0xf6400000-0xf77fffff]
[ 0.303445] pci_bus 0000:02: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.303447] pci_bus 0000:03: resource 0 [io 0xd000-0xefff]
[ 0.303448] pci_bus 0000:03: resource 1 [mem 0xf6400000-0xf76fffff]
[ 0.303449] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.303450] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.303451] pci_bus 0000:06: resource 1 [mem 0xf7600000-0xf76fffff]
[ 0.303452] pci_bus 0000:06: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.303454] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
[ 0.303455] pci_bus 0000:08: resource 1 [mem 0xf6400000-0xf74fffff]
[ 0.303456] pci_bus 0000:0b: resource 0 [io 0xf000-0xffff]
[ 0.303457] pci_bus 0000:0b: resource 1 [mem 0xf5000000-0xf60fffff]
[ 0.303458] pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.303460] pci_bus 0000:0c: resource 1 [mem 0xf7800000-0xf7afffff]
[ 0.303461] pci_bus 0000:0d: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.303778] pci 0000:0b:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.303809] pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0
[ 0.303975] PCI: CLS 64 bytes, default 64
[ 0.304001] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.304044] Trying to unpack rootfs image as initramfs...
[ 0.304052] pci 0000:00:01.0: Adding to iommu group 0
[ 0.304064] pci 0000:00:01.1: Adding to iommu group 1
[ 0.304074] pci 0000:00:01.3: Adding to iommu group 2
[ 0.304088] pci 0000:00:02.0: Adding to iommu group 3
[ 0.304103] pci 0000:00:03.0: Adding to iommu group 4
[ 0.304113] pci 0000:00:03.1: Adding to iommu group 5
[ 0.304126] pci 0000:00:04.0: Adding to iommu group 6
[ 0.304140] pci 0000:00:07.0: Adding to iommu group 7
[ 0.304150] pci 0000:00:07.1: Adding to iommu group 8
[ 0.304163] pci 0000:00:08.0: Adding to iommu group 9
[ 0.304174] pci 0000:00:08.1: Adding to iommu group 10
[ 0.304193] pci 0000:00:14.0: Adding to iommu group 11
[ 0.304202] pci 0000:00:14.3: Adding to iommu group 11
[ 0.304248] pci 0000:00:18.0: Adding to iommu group 12
[ 0.304257] pci 0000:00:18.1: Adding to iommu group 12
[ 0.304266] pci 0000:00:18.2: Adding to iommu group 12
[ 0.304277] pci 0000:00:18.3: Adding to iommu group 12
[ 0.304287] pci 0000:00:18.4: Adding to iommu group 12
[ 0.304296] pci 0000:00:18.5: Adding to iommu group 12
[ 0.304305] pci 0000:00:18.6: Adding to iommu group 12
[ 0.304314] pci 0000:00:18.7: Adding to iommu group 12
[ 0.304324] pci 0000:01:00.0: Adding to iommu group 13
[ 0.304348] pci 0000:02:00.0: Adding to iommu group 14
[ 0.304359] pci 0000:02:00.1: Adding to iommu group 14
[ 0.304370] pci 0000:02:00.2: Adding to iommu group 14
[ 0.304375] pci 0000:03:00.0: Adding to iommu group 14
[ 0.304378] pci 0000:03:01.0: Adding to iommu group 14
[ 0.304384] pci 0000:03:04.0: Adding to iommu group 14
[ 0.304388] pci 0000:03:05.0: Adding to iommu group 14
[ 0.304392] pci 0000:03:06.0: Adding to iommu group 14
[ 0.304396] pci 0000:03:07.0: Adding to iommu group 14
[ 0.304401] pci 0000:06:00.0: Adding to iommu group 14
[ 0.304407] pci 0000:08:00.0: Adding to iommu group 14
[ 0.304411] pci 0000:08:00.1: Adding to iommu group 14
[ 0.304429] pci 0000:0b:00.0: Adding to iommu group 15
[ 0.304441] pci 0000:0b:00.1: Adding to iommu group 15
[ 0.304452] pci 0000:0c:00.0: Adding to iommu group 16
[ 0.304464] pci 0000:0c:00.2: Adding to iommu group 17
[ 0.304475] pci 0000:0c:00.3: Adding to iommu group 18
[ 0.304487] pci 0000:0d:00.0: Adding to iommu group 19
[ 0.304498] pci 0000:0d:00.2: Adding to iommu group 20
[ 0.304508] pci 0000:0d:00.3: Adding to iommu group 21
[ 0.306955] AMD-Vi: Extended features (0xf77ef22294ada, 0x0): PPR NX GT IA GA PC GA_vAPIC
[ 0.306966] AMD-Vi: Interrupt remapping enabled
[ 0.307104] AMD-Vi: Virtual APIC enabled
[ 0.307109] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.307110] software IO TLB: mapped [mem 0x00000000d3bcb000-0x00000000d7bcb000] (64MB)
[ 0.307154] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.312618] Initialise system trusted keyrings
[ 0.312629] Key type blacklist registered
[ 0.312664] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.312670] zbud: loaded
[ 0.312755] fuse: init (API version 7.40)
[ 0.312826] integrity: Platform Keyring initialized
[ 0.312828] integrity: Machine keyring initialized
[ 0.323431] Key type asymmetric registered
[ 0.323433] Asymmetric key parser 'x509' registered
[ 0.323466] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.323534] io scheduler mq-deadline registered
[ 0.323541] io scheduler kyber registered
[ 0.323551] io scheduler bfq registered
[ 0.325161] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[ 0.325236] pcieport 0000:00:01.1: AER: enabled with IRQ 26
[ 0.325744] pcieport 0000:00:01.3: PME: Signaling with IRQ 27
[ 0.325795] pcieport 0000:00:01.3: AER: enabled with IRQ 27
[ 0.325980] pcieport 0000:00:03.1: PME: Signaling with IRQ 28
[ 0.326047] pcieport 0000:00:03.1: AER: enabled with IRQ 28
[ 0.326230] pcieport 0000:00:07.1: PME: Signaling with IRQ 29
[ 0.326287] pcieport 0000:00:07.1: AER: enabled with IRQ 29
[ 0.326823] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[ 0.326928] pcieport 0000:00:08.1: AER: enabled with IRQ 31
[ 0.327830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.327938] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.327959] ACPI: button: Power Button [PWRB]
[ 0.327981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.329756] ACPI: button: Power Button [PWRF]
[ 0.330288] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.330509] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.332423] Non-volatile memory driver v1.3
[ 0.332427] Linux agpgart interface v0.103
[ 0.332470] ACPI: bus type drm_connector registered
[ 0.332961] ahci 0000:02:00.1: version 3.0
[ 0.333094] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[ 0.333130] ahci 0000:02:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.333133] ahci 0000:02:00.1: 4/8 ports implemented (port mask 0x33)
[ 0.333134] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.333531] scsi host0: ahci
[ 0.333623] scsi host1: ahci
[ 0.333699] scsi host2: ahci
[ 0.333779] scsi host3: ahci
[ 0.333852] scsi host4: ahci
[ 0.333921] scsi host5: ahci
[ 0.333993] scsi host6: ahci
[ 0.334061] scsi host7: ahci
[ 0.334085] ata1: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780100 irq 41 lpm-pol 3
[ 0.334087] ata2: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780180 irq 41 lpm-pol 3
[ 0.334088] ata3: DUMMY
[ 0.334089] ata4: DUMMY
[ 0.334090] ata5: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780300 irq 41 lpm-pol 3
[ 0.334092] ata6: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780380 irq 41 lpm-pol 3
[ 0.334093] ata7: DUMMY
[ 0.334094] ata8: DUMMY
[ 0.334407] ahci 0000:0d:00.2: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.334410] ahci 0000:0d:00.2: 2/2 ports implemented (port mask 0x3)
[ 0.334411] ahci 0000:0d:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs
[ 0.334597] scsi host8: ahci
[ 0.334675] scsi host9: ahci
[ 0.334701] ata9: SATA max UDMA/133 abar m4096@0xf7b08000 port 0xf7b08100 irq 43 lpm-pol 0
[ 0.334703] ata10: SATA max UDMA/133 abar m4096@0xf7b08000 port 0xf7b08180 irq 44 lpm-pol 0
[ 0.334780] usbcore: registered new interface driver usbserial_generic
[ 0.334784] usbserial: USB Serial support registered for generic
[ 0.334860] rtc_cmos 00:01: RTC can wake from S4
[ 0.335258] rtc_cmos 00:01: registered as rtc0
[ 0.335320] rtc_cmos 00:01: setting system clock to 2024-07-23T21:44:34 UTC (1721771074)
[ 0.335356] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.335401] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[ 0.335433] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.335551] Relocating firmware framebuffer to offset 0x0000000001000000[d] within [mem 0xf0000000-0xf1ffffff flags 0x14220c]
[ 0.335672] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 0.336110] fbcon: Deferring console take-over
[ 0.336114] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.336160] hid: raw HID events driver (C) Jiri Kosina
[ 0.336223] drop_monitor: Initializing network drop monitor service
[ 0.336320] NET: Registered PF_INET6 protocol family
[ 0.341311] Freeing initrd memory: 8972K
[ 0.345550] Segment Routing with IPv6
[ 0.345552] RPL Segment Routing with IPv6
[ 0.345562] In-situ OAM (IOAM) with IPv6
[ 0.345587] NET: Registered PF_PACKET protocol family
[ 0.345911] microcode: Current revision: 0x08001137
[ 0.345983] IPI shorthand broadcast: enabled
[ 0.347394] sched_clock: Marking stable (346085021, 312267)->(350571922, -4174634)
[ 0.347476] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[ 0.347517] registered taskstats version 1
[ 0.347751] Loading compiled-in X.509 certificates
[ 0.350454] Loaded X.509 cert 'Build time autogenerated kernel key: 4c6f028942e243ae246dfff8cf5907591c08e6cc'
[ 0.353592] zswap: loaded using pool zstd/zsmalloc
[ 0.353649] Demotion targets for Node 0: null
[ 0.353902] Key type .fscrypt registered
[ 0.353903] Key type fscrypt-provisioning registered
[ 0.354774] PM: Magic number: 0:648:753
[ 0.354791] ata_link link4: hash matches
[ 0.354792] link4: hash matches
[ 0.354804] tty ttyS4: hash matches
[ 0.357442] RAS: Correctable Errors collector initialized.
[ 0.368070] clk: Disabling unused clocks
[ 0.368074] PM: genpd: Disabling unused power domains
[ 0.647553] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.648702] ata9: SATA link down (SStatus 0 SControl 300)
[ 0.650213] ata10: SATA link down (SStatus 0 SControl 300)
[ 0.965364] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.279776] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.333656] tsc: Refined TSC clocksource calibration: 3493.436 MHz
[ 1.333661] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325b186289d, max_idle_ns: 440795326624 ns
[ 1.333676] clocksource: Switched to clocksource tsc
[ 1.593102] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.594443] Freeing unused decrypted memory: 2028K
[ 1.594869] Freeing unused kernel image (initmem) memory: 3428K
[ 1.594888] Write protecting the kernel read-only data: 32768k
[ 1.595157] Freeing unused kernel image (rodata/data gap) memory: 936K
[ 1.639050] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.639055] rodata_test: all tests were successful
[ 1.639060] Run /init as init process
[ 1.639062] with arguments:
[ 1.639063] /init
[ 1.639064] with environment:
[ 1.639064] HOME=/
[ 1.639065] TERM=linux
[ 1.639066] BOOT_IMAGE=/boot/vmlinuz-linux-mainline
[ 1.672690] fbcon: Taking over console
[ 1.677643] Console: switching to colour frame buffer device 128x48
[ 1.776472] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.776481] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 1.798294] nvme nvme0: pci function 0000:01:00.0
[ 1.816839] nvme nvme0: 7/0/0 default/read/poll queues
[ 1.831846] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000010048000010
[ 1.832093] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.832098] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.832106] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.832154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 1.832157] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.832158] usb usb1: Product: xHCI Host Controller
[ 1.832160] usb usb1: Manufacturer: Linux 6.10.0-rc7-1.1-mainline-dirty xhci-hcd
[ 1.832161] usb usb1: SerialNumber: 0000:02:00.0
[ 1.832322] hub 1-0:1.0: USB hub found
[ 1.832336] hub 1-0:1.0: 10 ports detected
[ 1.832633] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.832650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10
[ 1.832652] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.832653] usb usb2: Product: xHCI Host Controller
[ 1.832654] usb usb2: Manufacturer: Linux 6.10.0-rc7-1.1-mainline-dirty xhci-hcd
[ 1.832655] usb usb2: SerialNumber: 0000:02:00.0
[ 1.832725] hub 2-0:1.0: USB hub found
[ 1.832733] hub 2-0:1.0: 4 ports detected
[ 1.832812] usb: port power management may be unreliable
[ 1.832965] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[ 1.832969] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3
[ 1.833067] xhci_hcd 0000:0c:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000010
[ 1.833218] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[ 1.833220] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4
[ 1.833222] xhci_hcd 0000:0c:00.3: Host supports USB 3.0 SuperSpeed
[ 1.833247] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 1.833249] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.833250] usb usb3: Product: xHCI Host Controller
[ 1.833251] usb usb3: Manufacturer: Linux 6.10.0-rc7-1.1-mainline-dirty xhci-hcd
[ 1.833252] usb usb3: SerialNumber: 0000:0c:00.3
[ 1.833329] hub 3-0:1.0: USB hub found
[ 1.833335] hub 3-0:1.0: 4 ports detected
[ 1.833500] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.833517] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10
[ 1.833519] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.833520] usb usb4: Product: xHCI Host Controller
[ 1.833521] usb usb4: Manufacturer: Linux 6.10.0-rc7-1.1-mainline-dirty xhci-hcd
[ 1.833522] usb usb4: SerialNumber: 0000:0c:00.3
[ 1.833593] hub 4-0:1.0: USB hub found
[ 1.833599] hub 4-0:1.0: 4 ports detected
[ 1.842964] nvme0n1: p1 p2 p3 p4 p5
[ 1.949912] EXT4-fs (nvme0n1p2): mounted filesystem e317bc8b-4ecb-4d50-8a10-16c83daf75b3 r/w with ordered data mode. Quota mode: none.
[ 2.020075] systemd[1]: systemd 256.2-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[ 2.020082] systemd[1]: Detected architecture x86-64.
[ 2.021133] systemd[1]: Hostname set to <aquilonia>.
[ 2.083658] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 2.182414] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 2.244570] systemd[1]: /usr/lib/systemd/system/shorewall6.service:17: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 2.245012] usb 1-5: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 2.245018] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.245020] usb 1-5: Product: USB 2.0 Hub
[ 2.245947] systemd[1]: /usr/lib/systemd/system/shorewall.service:16: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 2.250024] hub 1-5:1.0: USB hub found
[ 2.252998] hub 1-5:1.0: 4 ports detected
[ 2.306803] systemd[1]: Queued start job for default target Graphical Interface.
[ 2.331328] systemd[1]: Created slice Slice /system/dirmngr.
[ 2.331740] systemd[1]: Created slice Slice /system/getty.
[ 2.332047] systemd[1]: Created slice Slice /system/gpg-agent.
[ 2.332361] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 2.332668] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 2.332981] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 2.333306] systemd[1]: Created slice Slice /system/keyboxd.
[ 2.333619] systemd[1]: Created slice Slice /system/modprobe.
[ 2.334397] systemd[1]: Created slice Slice /system/netctl.
[ 2.334809] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 2.335122] systemd[1]: Created slice User and Session Slice.
[ 2.335307] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.335491] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.335777] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.335955] systemd[1]: Expecting device /dev/disk/by-uuid/0b65f5a0-93cf-4a0a-8a8f-f4bf9226f42c...
[ 2.336099] systemd[1]: Expecting device /dev/disk/by-uuid/239d593f-624d-4dea-9861-d6b13c23eb78...
[ 2.336241] systemd[1]: Expecting device /dev/disk/by-uuid/9607-240E...
[ 2.336358] systemd[1]: Expecting device /dev/disk/by-uuid/be771001-b8ee-4984-9a81-5e565c762a52...
[ 2.336498] systemd[1]: Expecting device /sys/subsystem/net/devices/enp6s0...
[ 2.336619] systemd[1]: Expecting device /sys/subsystem/net/devices/enp8s0f0...
[ 2.336748] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.336881] systemd[1]: Reached target Login Prompts.
[ 2.337012] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 2.337159] systemd[1]: Reached target Host and Network Name Lookups.
[ 2.337298] systemd[1]: Reached target Remote File Systems.
[ 2.337427] systemd[1]: Reached target Slice Units.
[ 2.337560] systemd[1]: Reached target Local Verity Protected Volumes.
[ 2.337678] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.337788] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.340643] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 2.340728] systemd[1]: Reached target RPC Port Mapper.
[ 2.341978] systemd[1]: Listening on Process Core Dump Socket.
[ 2.342720] systemd[1]: Listening on Credential Encryption/Decryption.
[ 2.342836] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.342946] systemd[1]: Listening on Journal Sockets.
[ 2.343012] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.343028] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.343099] systemd[1]: Listening on udev Control Socket.
[ 2.343180] systemd[1]: Listening on udev Kernel Socket.
[ 2.343972] systemd[1]: Mounting Huge Pages File System...
[ 2.344517] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.345109] systemd[1]: Mounting Kernel Debug File System...
[ 2.346759] systemd[1]: Mounting Kernel Trace File System...
[ 2.348559] systemd[1]: Starting Create List of Static Device Nodes...
[ 2.350159] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 2.351067] systemd[1]: Starting Load Kernel Module configfs...
[ 2.353452] systemd[1]: Starting Load Kernel Module dm_mod...
[ 2.355554] systemd[1]: Starting Load Kernel Module drm...
[ 2.357863] systemd[1]: Starting Load Kernel Module fuse...
[ 2.361691] systemd[1]: Starting Load Kernel Module loop...
[ 2.362491] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 2.362542] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 2.364250] systemd[1]: Starting Journal Service...
[ 2.367327] systemd[1]: Starting Load Kernel Modules...
[ 2.367686] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.371694] device-mapper: uevent: version 1.0.3
[ 2.371815] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 2.371888] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.373321] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.374075] loop: module loaded
[ 2.374526] systemd[1]: Starting Load udev Rules from Credentials...
[ 2.380655] systemd[1]: Starting Coldplug All udev Devices...
[ 2.384603] systemd[1]: Mounted Huge Pages File System.
[ 2.385092] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.385461] systemd[1]: Mounted Kernel Debug File System.
[ 2.385792] systemd[1]: Mounted Kernel Trace File System.
[ 2.386290] systemd[1]: Finished Create List of Static Device Nodes.
[ 2.386851] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 2.387015] systemd[1]: Finished Load Kernel Module configfs.
[ 2.387537] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 2.387670] systemd[1]: Finished Load Kernel Module dm_mod.
[ 2.388305] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 2.388482] systemd[1]: Finished Load Kernel Module drm.
[ 2.389093] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 2.389220] systemd[1]: Finished Load Kernel Module fuse.
[ 2.389610] systemd-journald[295]: Collecting audit messages is disabled.
[ 2.389690] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 2.389825] systemd[1]: Finished Load Kernel Module loop.
[ 2.390300] systemd[1]: Finished Load Kernel Modules.
[ 2.394931] systemd[1]: Mounting FUSE Control File System...
[ 2.395891] systemd[1]: Mounting Kernel Configuration File System...
[ 2.396214] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 2.397454] systemd[1]: Starting Apply Kernel Variables...
[ 2.398520] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 2.400618] EXT4-fs (nvme0n1p2): re-mounted e317bc8b-4ecb-4d50-8a10-16c83daf75b3 r/w. Quota mode: none.
[ 2.405247] systemd[1]: Finished Load udev Rules from Credentials.
[ 2.406516] systemd[1]: Mounted FUSE Control File System.
[ 2.408489] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.409273] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
[ 2.414732] systemd[1]: Mounted Kernel Configuration File System.
[ 2.415853] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 2.417315] systemd[1]: Finished Apply Kernel Variables.
[ 2.426928] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[ 2.430464] systemd[1]: Starting Create System Users...
[ 2.433820] systemd[1]: Started Journal Service.
[ 2.625086] dca service started, version 1.12.1
[ 2.647795] Adding 4194300k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:4194300k SS
[ 2.650836] ccp 0000:0c:00.2: enabling device (0000 -> 0002)
[ 2.651804] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.651809] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 2.651878] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 2.659277] pps_core: LinuxPPS API ver. 1 registered
[ 2.659280] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.659294] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 2.659297] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 2.667016] cryptd: max_cpu_qlen set to 1000
[ 2.669269] PTP clock support registered
[ 2.670498] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 2.670591] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 2.670788] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 2.670920] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 2.671158] ccp 0000:0c:00.2: ccp enabled
[ 2.671163] ccp 0000:0c:00.2: psp: unable to access the device: you might be running a broken BIOS.
[ 2.673684] usb 1-5.3: new full-speed USB device number 3 using xhci_hcd
[ 2.686960] igb: Intel(R) Gigabit Ethernet Network Driver
[ 2.686966] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.695035] AVX2 version of gcm_enc/dec engaged.
[ 2.695107] AES CTR mode by8 optimization enabled
[ 2.708067] r8169 0000:06:00.0 eth0: RTL8168g/8111g, e0:d5:5e:68:14:c5, XID 4c0, IRQ 91
[ 2.708074] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 2.764882] snd_hda_intel 0000:0b:00.1: Disabling MSI
[ 2.764895] snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client
[ 2.764935] snd_hda_intel 0000:0d:00.3: enabling device (0000 -> 0002)
[ 2.787467] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input3
[ 2.787506] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input4
[ 2.787540] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input5
[ 2.787571] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input6
[ 2.796971] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 2.796977] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.796992] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.796993] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 2.796995] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 2.796996] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 2.796997] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 2.796999] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 2.797000] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 2.799374] r8169 0000:06:00.0 enp6s0: renamed from eth0
[ 2.811692] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input7
[ 2.811728] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input8
[ 2.811761] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input9
[ 2.812125] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input10
[ 2.812155] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input11
[ 2.849359] AMD Address Translation Library initialized
[ 2.849890] intel_rapl_common: Found RAPL domain package
[ 2.849894] intel_rapl_common: Found RAPL domain core
[ 2.879738] igb 0000:08:00.0: added PHC on eth0
[ 2.879776] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.879778] igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 80:61:5f:0a:2c:fc
[ 2.879861] igb 0000:08:00.0: eth0: PBA No: E43709-006
[ 2.879862] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 3.066289] igb 0000:08:00.1: added PHC on eth1
[ 3.066325] igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 3.066326] igb 0000:08:00.1: eth1: (PCIe:2.5Gb/s:Width x1) 80:61:5f:0a:2c:fd
[ 3.066411] igb 0000:08:00.1: eth1: PBA No: E43709-006
[ 3.066412] igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 3.069455] igb 0000:08:00.1 enp8s0f1: renamed from eth1
[ 3.069579] igb 0000:08:00.0 enp8s0f0: renamed from eth0
[ 3.125011] usb 1-5.3: New USB device found, idVendor=046d, idProduct=c318, bcdDevice=55.03
[ 3.125017] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.125019] usb 1-5.3: Product: Logitech Illuminated Keyboard
[ 3.125020] usb 1-5.3: Manufacturer: Logitech
[ 3.346984] usb 1-5.4: new low-speed USB device number 4 using xhci_hcd
[ 3.416334] EXT4-fs (nvme0n1p5): mounted filesystem be771001-b8ee-4984-9a81-5e565c762a52 r/w with ordered data mode. Quota mode: none.
[ 3.418912] EXT4-fs (nvme0n1p4): mounted filesystem 0b65f5a0-93cf-4a0a-8a8f-f4bf9226f42c r/w with ordered data mode. Quota mode: none.
[ 3.435690] systemd-journald[295]: Received client request to flush runtime journal.
[ 3.700340] Generic FE-GE Realtek PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC)
[ 3.704029] usb 1-5.4: New USB device found, idVendor=03f0, idProduct=0941, bcdDevice= 1.00
[ 3.704032] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.704033] usb 1-5.4: Product: HP X500 USB Optical Mouse
[ 3.704035] usb 1-5.4: Manufacturer: PixArt
[ 3.809095] usbcore: registered new interface driver usbhid
[ 3.809100] usbhid: USB HID core driver
[ 3.816583] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5.3/1-5.3:1.0/0003:046D:C318.0001/input/input12
[ 3.873764] hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:02:00.0-5.3/input0
[ 3.873910] input: Logitech Logitech Illuminated Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5.3/1-5.3:1.1/0003:046D:C318.0002/input/input13
[ 3.897136] r8169 0000:06:00.0 enp6s0: Link is Down
[ 3.930463] hid-generic 0003:046D:C318.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:02:00.0-5.3/input1
[ 3.930573] input: PixArt HP X500 USB Optical Mouse as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5.4/1-5.4:1.0/0003:03F0:0941.0003/input/input15
[ 3.930724] hid-generic 0003:03F0:0941.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP X500 USB Optical Mouse] on usb-0000:02:00.0-5.4/input0
[ 3.944839] mousedev: PS/2 mouse device common for all mice
[ 6.540919] igb 0000:08:00.0 enp8s0f0: igb: enp8s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 6.567279] r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-23 22:08 ` Christian Heusel
@ 2024-07-25 10:50 ` Borislav Petkov
2024-07-25 22:01 ` Christian Heusel
0 siblings, 1 reply; 24+ messages in thread
From: Borislav Petkov @ 2024-07-25 10:50 UTC (permalink / raw)
To: Christian Heusel; +Cc: Thomas Gleixner, regressions, x86, rob
On Wed, Jul 24, 2024 at 12:08:39AM +0200, Christian Heusel wrote:
> See the attached dmesg for a boot with the mainline kernel that has the
> problematic patch reverted!
Thx.
Now, please take plain 6.10 (no reverts), apply the below hunk and send me
dmesg again.
Make sure you boot with "apic=debug" on the kernel cmdline.
Let's see what crap MADT has there.
Also, send /proc/cpuinfo too pls.
> Regarding the Arch Kernel, we're using a minimal patchset of 3 or 4
> patches, see i.e. the following release:
> https://github.com/archlinux/linux/releases/tag/v6.9.9-arch1
>
> Other releases are a bit more heavy, but mostly consist of additional
> backports to fix issues before the next stable release.
Yeah, when reporting an upstream bug, people should always test with the
upstream kernel because everybody is backporting stuff now.
Thx.
---
diff --git a/arch/x86/kernel/cpu/topology.c b/arch/x86/kernel/cpu/topology.c
index 621a151ccf7d..fabc1a0b58bb 100644
--- a/arch/x86/kernel/cpu/topology.c
+++ b/arch/x86/kernel/cpu/topology.c
@@ -222,6 +222,9 @@ static __init void topo_register_apic(u32 apic_id, u32 acpi_id, bool present)
{
int cpu, dom;
+ pr_info("%s: APIC ID: %d, ACPI ID: %d, present: %d\n",
+ __func__, apic_id, acpi_id, present);
+
if (present) {
set_bit(apic_id, phys_cpu_present_map);
@@ -236,20 +239,24 @@ static __init void topo_register_apic(u32 apic_id, u32 acpi_id, bool present)
else
cpu = topo_get_cpunr(apic_id);
+ pr_info("%s: present, cpu %d\n", __func__, cpu);
+
cpuid_to_apicid[cpu] = apic_id;
topo_set_cpuids(cpu, apic_id, acpi_id);
} else {
u32 pkgid = topo_apicid(apic_id, TOPO_PKG_DOMAIN);
+ unsigned int unit_cnt = topo_unit_count(pkgid, TOPO_PKG_DOMAIN, phys_cpu_present_map);
+
+ pr_info("%s: unit_cnt: %d\n", __func__, unit_cnt);
/*
* Check for present APICs in the same package when running
* on bare metal. Allow the bogosity in a guest.
*/
- if (hypervisor_is_type(X86_HYPER_NATIVE) &&
- topo_unit_count(pkgid, TOPO_PKG_DOMAIN, phys_cpu_present_map)) {
- pr_info_once("Ignoring hot-pluggable APIC ID %x in present package.\n",
+ if (hypervisor_is_type(X86_HYPER_NATIVE) && unit_cnt) {
+ pr_info("Ignoring hot-pluggable APIC ID %x in present package.\n",
apic_id);
- topo_info.nr_rejected_cpus++;
+// topo_info.nr_rejected_cpus++;
return;
}
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-25 10:50 ` Borislav Petkov
@ 2024-07-25 22:01 ` Christian Heusel
2024-07-26 10:50 ` Thomas Gleixner
0 siblings, 1 reply; 24+ messages in thread
From: Christian Heusel @ 2024-07-25 22:01 UTC (permalink / raw)
To: Borislav Petkov; +Cc: Thomas Gleixner, regressions, x86, rob
[-- Attachment #1.1: Type: text/plain, Size: 1622 bytes --]
On 24/07/25 12:50PM, Borislav Petkov wrote:
> On Wed, Jul 24, 2024 at 12:08:39AM +0200, Christian Heusel wrote:
> > See the attached dmesg for a boot with the mainline kernel that has the
> > problematic patch reverted!
>
> Thx.
>
> Now, please take plain 6.10 (no reverts), apply the below hunk and send me
> dmesg again.
>
> Make sure you boot with "apic=debug" on the kernel cmdline.
>
> Let's see what crap MADT has there.
>
> Also, send /proc/cpuinfo too pls.
See the attachments for the logs for both the requested things here!
>
> > Regarding the Arch Kernel, we're using a minimal patchset of 3 or 4
> > patches, see i.e. the following release:
> > https://github.com/archlinux/linux/releases/tag/v6.9.9-arch1
> >
> > Other releases are a bit more heavy, but mostly consist of additional
> > backports to fix issues before the next stable release.
>
> Yeah, when reporting an upstream bug, people should always test with the
> upstream kernel because everybody is backporting stuff now.
Yes that is understood, I think this was only an issue about the
surrounding communication .. We did the bisection and testing with the
mainline tree, but the dmesg for a working boot was retrieved with a our
"distro" kernel (which is essentially just the stable kernel as released
by the stable team).
Also as I had written in my initial mail we have verified that the issue
also was present at the latest mainline release candidate, which at the
time was 6.10-rc6
Sorry for causing some confusion on that part and I hope the above
outputs help with debugging this issue!
[-- Attachment #1.2: cpuinfo.20240725.2237.txt --]
[-- Type: text/plain, Size: 5616 bytes --]
processor : 0
vendor_id : AuthenticAMD
cpu family : 23
model : 1
model name : AMD Ryzen 3 1300X Quad-Core Processor
stepping : 1
microcode : 0x8001137
cpu MHz : 3593.662
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca sev
bugs : sysret_ss_attrs null_seg spectre_v1 spectre_v2 spec_store_bypass retbleed smt_rsb srso div0
bogomips : 6989.88
TLB size : 2560 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 43 bits physical, 48 bits virtual
power management: ts ttp tm hwpstate eff_freq_ro [13] [14]
processor : 1
vendor_id : AuthenticAMD
cpu family : 23
model : 1
model name : AMD Ryzen 3 1300X Quad-Core Processor
stepping : 1
microcode : 0x8001137
cpu MHz : 3595.200
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca sev
bugs : sysret_ss_attrs null_seg spectre_v1 spectre_v2 spec_store_bypass retbleed smt_rsb srso div0
bogomips : 6989.88
TLB size : 2560 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 43 bits physical, 48 bits virtual
power management: ts ttp tm hwpstate eff_freq_ro [13] [14]
processor : 2
vendor_id : AuthenticAMD
cpu family : 23
model : 1
model name : AMD Ryzen 3 1300X Quad-Core Processor
stepping : 1
microcode : 0x8001137
cpu MHz : 3493.383
cache size : 512 KB
physical id : 0
siblings : 4
core id : 8
cpu cores : 4
apicid : 8
initial apicid : 8
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca sev
bugs : sysret_ss_attrs null_seg spectre_v1 spectre_v2 spec_store_bypass retbleed smt_rsb srso div0
bogomips : 6989.88
TLB size : 2560 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 43 bits physical, 48 bits virtual
power management: ts ttp tm hwpstate eff_freq_ro [13] [14]
processor : 3
vendor_id : AuthenticAMD
cpu family : 23
model : 1
model name : AMD Ryzen 3 1300X Quad-Core Processor
stepping : 1
microcode : 0x8001137
cpu MHz : 3592.037
cache size : 512 KB
physical id : 0
siblings : 4
core id : 9
cpu cores : 4
apicid : 9
initial apicid : 9
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca sev
bugs : sysret_ss_attrs null_seg spectre_v1 spectre_v2 spec_store_bypass retbleed smt_rsb srso div0
bogomips : 6989.88
TLB size : 2560 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 43 bits physical, 48 bits virtual
power management: ts ttp tm hwpstate eff_freq_ro [13] [14]
[-- Attachment #1.3: dmesg.20240725.2237.txt --]
[-- Type: text/plain, Size: 102238 bytes --]
[ 0.000000] Linux version 6.10.0-1.1-mainline-dirty (linux-mainline@archlinux) (gcc (GCC) 14.1.1 20240720, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Thu, 25 Jul 2024 11:18:53 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-mainline root=UUID=e317bc8b-4ecb-4d50-8a10-16c83daf75b3 rw nvidia-drm.modeset=1 apic=debug iommu=off
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000dbb65fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbb66000-0x00000000dbc62fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dbc63000-0x00000000dbcdffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dbce0000-0x00000000dc1effff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dc1f0000-0x00000000dcee7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dcee8000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f37ffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0xceb94018-0xceba2057] usable ==> usable
[ 0.000000] e820: update [mem 0xceb63018-0xceb93257] usable ==> usable
[ 0.000000] e820: update [mem 0xceb32018-0xceb62257] usable ==> usable
[ 0.000000] e820: update [mem 0xceb12018-0xceb31457] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009cfffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000000a20a000-0x000000000affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000ceb12017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb12018-0x00000000ceb31457] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb31458-0x00000000ceb32017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb32018-0x00000000ceb62257] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb62258-0x00000000ceb63017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb63018-0x00000000ceb93257] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb93258-0x00000000ceb94017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceb94018-0x00000000ceba2057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ceba2058-0x00000000dbb65fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dbb66000-0x00000000dbc62fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dbc63000-0x00000000dbcdffff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000dbce0000-0x00000000dc1effff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000dc1f0000-0x00000000dcee7fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dcee8000-0x00000000deffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f37ffff] usable
[ 0.000000] efi: EFI v2.7 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xdc16f000 ACPI=0xdc16f000 SMBIOS=0xdcd1a000 SMBIOS 3.0=0xdcd19000 ESRT=0xda4d8798 MEMATTR=0xd7bcb018 INITRD=0xd2e47e98 RNG=0xdbcdf018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem35: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[ 0.000000] efi: Remove mem36: MMIO range=[0xfd100000-0xfdffffff] (15MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd100000-0xfdffffff] reserved
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
[ 0.000000] efi: Remove mem38: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
[ 0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] reserved
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem40: MMIO range=[0xfec30000-0xfec30fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem41: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem42: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
[ 0.000000] efi: Not removing mem43: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[ 0.000000] efi: Not removing mem44: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
[ 0.000000] efi: Not removing mem45: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
[ 0.000000] efi: Remove mem46: MMIO range=[0xfee00000-0xfeefffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfee00000-0xfeefffff] reserved
[ 0.000000] efi: Remove mem47: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. AB350M-D3V/AB350M-D3V-CF, BIOS F23 08/08/2018
[ 0.000000] DMI: Memory slots populated: 2/4
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3493.383 MHz processor
[ 0.000574] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000577] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000590] last_pfn = 0x21f380 max_arch_pfn = 0x400000000
[ 0.000597] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
[ 0.000599] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000825] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000833] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000834] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000847] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000858] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.004981] Scan for SMP in [mem 0x0009ec00-0x0009efff]
[ 0.005004] esrt: Reserving ESRT space from 0x00000000da4d8798 to 0x00000000da4d87d0.
[ 0.005011] e820: update [mem 0xda4d8000-0xda4d8fff] usable ==> reserved
[ 0.005030] Using GB pages for direct mapping
[ 0.005408] Secure boot disabled
[ 0.005409] RAMDISK: [mem 0xceba3000-0xcf469fff]
[ 0.005427] ACPI: Early table checksum verification disabled
[ 0.005431] ACPI: RSDP 0x00000000DC16F000 000024 (v02 ALASKA)
[ 0.005434] ACPI: XSDT 0x00000000DC16F098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005440] ACPI: FACP 0x00000000DC1761E8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.005444] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240322/tbfadt-611)
[ 0.005448] ACPI: DSDT 0x00000000DC16F1D8 00700F (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.005451] ACPI: FACS 0x00000000DC1D8E00 000040
[ 0.005453] ACPI: APIC 0x00000000DC176300 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.005456] ACPI: FPDT 0x00000000DC1763E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005459] ACPI: FIDT 0x00000000DC176428 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005462] ACPI: SSDT 0x00000000DC1764C8 008C98 (v02 ALASKA A M I 00000002 MSFT 04000000)
[ 0.005465] ACPI: CRAT 0x00000000DC17F160 000850 (v01 ALASKA A M I 00000001 AMD 00000001)
[ 0.005468] ACPI: CDIT 0x00000000DC17F9B0 000029 (v01 ALASKA A M I 00000001 AMD 00000001)
[ 0.005470] ACPI: SSDT 0x00000000DC17F9E0 002DBA (v01 ALASKA A M I 00000001 INTL 20120913)
[ 0.005473] ACPI: MCFG 0x00000000DC1827A0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.005476] ACPI: HPET 0x00000000DC1827E0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.005478] ACPI: SSDT 0x00000000DC182818 000024 (v01 ALASKA A M I 00001000 INTL 20120913)
[ 0.005481] ACPI: UEFI 0x00000000DC182840 000048 (v01 ALASKA A M I 00000000 00000000)
[ 0.005484] ACPI: BGRT 0x00000000DC182888 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005486] ACPI: IVRS 0x00000000DC1828C0 0000D0 (v02 ALASKA A M I 00000001 AMD 00000000)
[ 0.005489] ACPI: SSDT 0x00000000DC182990 001A41 (v01 ALASKA A M I 00000001 INTL 20120913)
[ 0.005492] ACPI: SSDT 0x00000000DC1843D8 0000F8 (v01 ALASKA A M I 00001000 INTL 20120913)
[ 0.005495] ACPI: WSMT 0x00000000DC1844D0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005497] ACPI: Reserving FACP table memory at [mem 0xdc1761e8-0xdc1762fb]
[ 0.005498] ACPI: Reserving DSDT table memory at [mem 0xdc16f1d8-0xdc1761e6]
[ 0.005499] ACPI: Reserving FACS table memory at [mem 0xdc1d8e00-0xdc1d8e3f]
[ 0.005500] ACPI: Reserving APIC table memory at [mem 0xdc176300-0xdc1763dd]
[ 0.005501] ACPI: Reserving FPDT table memory at [mem 0xdc1763e0-0xdc176423]
[ 0.005502] ACPI: Reserving FIDT table memory at [mem 0xdc176428-0xdc1764c3]
[ 0.005503] ACPI: Reserving SSDT table memory at [mem 0xdc1764c8-0xdc17f15f]
[ 0.005504] ACPI: Reserving CRAT table memory at [mem 0xdc17f160-0xdc17f9af]
[ 0.005505] ACPI: Reserving CDIT table memory at [mem 0xdc17f9b0-0xdc17f9d8]
[ 0.005506] ACPI: Reserving SSDT table memory at [mem 0xdc17f9e0-0xdc182799]
[ 0.005506] ACPI: Reserving MCFG table memory at [mem 0xdc1827a0-0xdc1827db]
[ 0.005507] ACPI: Reserving HPET table memory at [mem 0xdc1827e0-0xdc182817]
[ 0.005508] ACPI: Reserving SSDT table memory at [mem 0xdc182818-0xdc18283b]
[ 0.005509] ACPI: Reserving UEFI table memory at [mem 0xdc182840-0xdc182887]
[ 0.005510] ACPI: Reserving BGRT table memory at [mem 0xdc182888-0xdc1828bf]
[ 0.005511] ACPI: Reserving IVRS table memory at [mem 0xdc1828c0-0xdc18298f]
[ 0.005511] ACPI: Reserving SSDT table memory at [mem 0xdc182990-0xdc1843d0]
[ 0.005512] ACPI: Reserving SSDT table memory at [mem 0xdc1843d8-0xdc1844cf]
[ 0.005513] ACPI: Reserving WSMT table memory at [mem 0xdc1844d0-0xdc1844f7]
[ 0.005526] mapped APIC to ffffffffff5fd000 ( fee00000)
[ 0.005528] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: -1, present: 1
[ 0.005530] CPU topo: topo_register_apic: present, cpu 0
[ 0.005600] No NUMA configuration found
[ 0.005600] Faking a node at [mem 0x0000000000000000-0x000000021f37ffff]
[ 0.005603] NODE_DATA(0) allocated [mem 0x21f37b000-0x21f37ffff]
[ 0.005629] Zone ranges:
[ 0.005630] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.005631] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.005633] Normal [mem 0x0000000100000000-0x000000021f37ffff]
[ 0.005634] Device empty
[ 0.005635] Movable zone start for each node
[ 0.005636] Early memory node ranges
[ 0.005636] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.005637] node 0: [mem 0x0000000000100000-0x0000000009cfffff]
[ 0.005639] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.005640] node 0: [mem 0x000000000a20a000-0x000000000affffff]
[ 0.005640] node 0: [mem 0x000000000b020000-0x00000000dbb65fff]
[ 0.005642] node 0: [mem 0x00000000dcee8000-0x00000000deffffff]
[ 0.005642] node 0: [mem 0x0000000100000000-0x000000021f37ffff]
[ 0.005644] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f37ffff]
[ 0.005649] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.005674] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.005886] On node 0, zone DMA32: 768 pages in unavailable ranges
[ 0.005908] On node 0, zone DMA32: 10 pages in unavailable ranges
[ 0.013610] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.013752] On node 0, zone DMA32: 4994 pages in unavailable ranges
[ 0.024644] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.024689] On node 0, zone Normal: 3200 pages in unavailable ranges
[ 0.025123] ACPI: PM-Timer IO Port: 0x808
[ 0.025129] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 1, present: 1
[ 0.025130] CPU topo: topo_register_apic: present, cpu 0
[ 0.025131] CPU topo: topo_register_apic: APIC ID: 1, ACPI ID: 2, present: 1
[ 0.025132] CPU topo: topo_register_apic: present, cpu 1
[ 0.025133] CPU topo: topo_register_apic: APIC ID: 8, ACPI ID: 3, present: 1
[ 0.025134] CPU topo: topo_register_apic: present, cpu 2
[ 0.025135] CPU topo: topo_register_apic: APIC ID: 9, ACPI ID: 4, present: 1
[ 0.025135] CPU topo: topo_register_apic: present, cpu 3
[ 0.025136] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 5, present: 0
[ 0.025137] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025138] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025139] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 6, present: 0
[ 0.025139] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025140] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025141] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 7, present: 0
[ 0.025142] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025142] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025143] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 8, present: 0
[ 0.025144] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025144] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025145] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 9, present: 0
[ 0.025146] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025146] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025147] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 10, present: 0
[ 0.025148] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025149] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025149] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 11, present: 0
[ 0.025150] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025151] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025151] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 12, present: 0
[ 0.025152] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025153] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025153] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 13, present: 0
[ 0.025154] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025155] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025155] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 14, present: 0
[ 0.025156] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025157] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025157] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 15, present: 0
[ 0.025158] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025159] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025160] CPU topo: topo_register_apic: APIC ID: 0, ACPI ID: 16, present: 0
[ 0.025160] CPU topo: topo_register_apic: unit_cnt: 4
[ 0.025161] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
[ 0.025163] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.025181] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.025186] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.025188] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.025189] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 5, APIC INT 02
[ 0.025191] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.025192] Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 5, APIC INT 09
[ 0.025194] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 5, APIC INT 01
[ 0.025196] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 5, APIC INT 03
[ 0.025197] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 5, APIC INT 04
[ 0.025198] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 5, APIC INT 05
[ 0.025199] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 5, APIC INT 06
[ 0.025200] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 5, APIC INT 07
[ 0.025202] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 5, APIC INT 08
[ 0.025203] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 5, APIC INT 0a
[ 0.025204] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 5, APIC INT 0b
[ 0.025205] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 5, APIC INT 0c
[ 0.025206] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 5, APIC INT 0d
[ 0.025207] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 5, APIC INT 0e
[ 0.025208] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 5, APIC INT 0f
[ 0.025211] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.025212] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.025221] e820: update [mem 0xd8135000-0xd8179fff] usable ==> reserved
[ 0.025243] CPU topo: Max. logical packages: 1
[ 0.025244] CPU topo: Max. logical dies: 1
[ 0.025245] CPU topo: Max. dies per package: 1
[ 0.025249] CPU topo: Max. threads per core: 1
[ 0.025250] CPU topo: Num. cores per package: 4
[ 0.025250] CPU topo: Num. threads per package: 4
[ 0.025251] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.025254] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[ 0.025255] mapped IOAPIC to ffffffffff5fb000 (fec01000)
[ 0.025276] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.025277] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.025279] PM: hibernation: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
[ 0.025281] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
[ 0.025283] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.025284] PM: hibernation: Registered nosave memory: [mem 0xceb12000-0xceb12fff]
[ 0.025286] PM: hibernation: Registered nosave memory: [mem 0xceb31000-0xceb31fff]
[ 0.025287] PM: hibernation: Registered nosave memory: [mem 0xceb32000-0xceb32fff]
[ 0.025288] PM: hibernation: Registered nosave memory: [mem 0xceb62000-0xceb62fff]
[ 0.025289] PM: hibernation: Registered nosave memory: [mem 0xceb63000-0xceb63fff]
[ 0.025291] PM: hibernation: Registered nosave memory: [mem 0xceb93000-0xceb93fff]
[ 0.025292] PM: hibernation: Registered nosave memory: [mem 0xceb94000-0xceb94fff]
[ 0.025293] PM: hibernation: Registered nosave memory: [mem 0xceba2000-0xceba2fff]
[ 0.025295] PM: hibernation: Registered nosave memory: [mem 0xd8135000-0xd8179fff]
[ 0.025297] PM: hibernation: Registered nosave memory: [mem 0xda4d8000-0xda4d8fff]
[ 0.025298] PM: hibernation: Registered nosave memory: [mem 0xdbb66000-0xdbc62fff]
[ 0.025299] PM: hibernation: Registered nosave memory: [mem 0xdbc63000-0xdbcdffff]
[ 0.025300] PM: hibernation: Registered nosave memory: [mem 0xdbce0000-0xdc1effff]
[ 0.025301] PM: hibernation: Registered nosave memory: [mem 0xdc1f0000-0xdcee7fff]
[ 0.025302] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[ 0.025303] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xfe9fffff]
[ 0.025304] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.025304] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfec0ffff]
[ 0.025305] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.025306] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.025307] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.025307] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.025308] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.025309] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.025309] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.025310] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.025311] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.025312] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.025312] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.025313] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.025314] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.025315] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xffffffff]
[ 0.025316] [mem 0xe0000000-0xfe9fffff] available for PCI devices
[ 0.025317] Booting paravirtualized kernel on bare hardware
[ 0.025320] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.030525] setup_percpu: NR_CPUS:320 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.030876] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[ 0.030883] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[ 0.030885] pcpu-alloc: [0] 0 1 2 3
[ 0.030906] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-mainline root=UUID=e317bc8b-4ecb-4d50-8a10-16c83daf75b3 rw nvidia-drm.modeset=1 apic=debug iommu=off
[ 0.030980] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-mainline", will be passed to user space.
[ 0.031958] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.032494] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.032538] Fallback order for Node 0: 0
[ 0.032543] Built 1 zonelists, mobility grouping on. Total pages: 2083955
[ 0.032545] Policy zone: Normal
[ 0.032853] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.051136] Memory: 8076348K/8335820K available (18432K kernel code, 2177K rwdata, 13400K rodata, 3424K init, 3516K bss, 259212K reserved, 0K cma-reserved)
[ 0.051337] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.051375] ftrace: allocating 50091 entries in 196 pages
[ 0.059201] ftrace: allocated 196 pages with 3 groups
[ 0.059282] Dynamic Preempt: full
[ 0.059319] rcu: Preemptible hierarchical RCU implementation.
[ 0.059320] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.059321] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.059322] Trampoline variant of Tasks RCU enabled.
[ 0.059322] Rude variant of Tasks RCU enabled.
[ 0.059323] Tracing variant of Tasks RCU enabled.
[ 0.059323] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.059324] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.059330] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.059331] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.059332] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.063330] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[ 0.063525] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.063663] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.063692] Console: colour dummy device 80x25
[ 0.063694] printk: legacy console [tty0] enabled
[ 0.063741] ACPI: Core revision 20240322
[ 0.063840] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.063867] APIC: Switch to symmetric I/O mode setup
[ 0.063935] enabled ExtINT on CPU#0
[ 0.064524] ENABLING IO-APIC IRQs
[ 0.064528] init IO_APIC IRQs
[ 0.064528] apic 5 pin 0 not connected
[ 0.064533] IOAPIC[0]: Preconfigured routing entry (5-1 -> IRQ 1 Level:0 ActiveLow:0)
[ 0.064536] IOAPIC[0]: Preconfigured routing entry (5-2 -> IRQ 0 Level:0 ActiveLow:0)
[ 0.064540] IOAPIC[0]: Preconfigured routing entry (5-3 -> IRQ 3 Level:0 ActiveLow:0)
[ 0.064543] IOAPIC[0]: Preconfigured routing entry (5-4 -> IRQ 4 Level:0 ActiveLow:0)
[ 0.064545] IOAPIC[0]: Preconfigured routing entry (5-5 -> IRQ 5 Level:0 ActiveLow:0)
[ 0.064548] IOAPIC[0]: Preconfigured routing entry (5-6 -> IRQ 6 Level:0 ActiveLow:0)
[ 0.064551] IOAPIC[0]: Preconfigured routing entry (5-7 -> IRQ 7 Level:0 ActiveLow:0)
[ 0.064554] IOAPIC[0]: Preconfigured routing entry (5-8 -> IRQ 8 Level:0 ActiveLow:0)
[ 0.064557] IOAPIC[0]: Preconfigured routing entry (5-9 -> IRQ 9 Level:1 ActiveLow:1)
[ 0.064560] IOAPIC[0]: Preconfigured routing entry (5-10 -> IRQ 10 Level:0 ActiveLow:0)
[ 0.064563] IOAPIC[0]: Preconfigured routing entry (5-11 -> IRQ 11 Level:0 ActiveLow:0)
[ 0.064566] IOAPIC[0]: Preconfigured routing entry (5-12 -> IRQ 12 Level:0 ActiveLow:0)
[ 0.064569] IOAPIC[0]: Preconfigured routing entry (5-13 -> IRQ 13 Level:0 ActiveLow:0)
[ 0.064571] IOAPIC[0]: Preconfigured routing entry (5-14 -> IRQ 14 Level:0 ActiveLow:0)
[ 0.064574] IOAPIC[0]: Preconfigured routing entry (5-15 -> IRQ 15 Level:0 ActiveLow:0)
[ 0.064575] apic 5 pin 16 not connected
[ 0.064576] apic 5 pin 17 not connected
[ 0.064577] apic 5 pin 18 not connected
[ 0.064578] apic 5 pin 19 not connected
[ 0.064578] apic 5 pin 20 not connected
[ 0.064579] apic 5 pin 21 not connected
[ 0.064580] apic 5 pin 22 not connected
[ 0.064580] apic 5 pin 23 not connected
[ 0.064581] apic 6 pin 0 not connected
[ 0.064582] apic 6 pin 1 not connected
[ 0.064582] apic 6 pin 2 not connected
[ 0.064583] apic 6 pin 3 not connected
[ 0.064584] apic 6 pin 4 not connected
[ 0.064584] apic 6 pin 5 not connected
[ 0.064585] apic 6 pin 6 not connected
[ 0.064585] apic 6 pin 7 not connected
[ 0.064586] apic 6 pin 8 not connected
[ 0.064587] apic 6 pin 9 not connected
[ 0.064587] apic 6 pin 10 not connected
[ 0.064588] apic 6 pin 11 not connected
[ 0.064588] apic 6 pin 12 not connected
[ 0.064589] apic 6 pin 13 not connected
[ 0.064590] apic 6 pin 14 not connected
[ 0.064590] apic 6 pin 15 not connected
[ 0.064591] apic 6 pin 16 not connected
[ 0.064591] apic 6 pin 17 not connected
[ 0.064592] apic 6 pin 18 not connected
[ 0.064593] apic 6 pin 19 not connected
[ 0.064593] apic 6 pin 20 not connected
[ 0.064594] apic 6 pin 21 not connected
[ 0.064594] apic 6 pin 22 not connected
[ 0.064595] apic 6 pin 23 not connected
[ 0.064596] apic 6 pin 24 not connected
[ 0.064596] apic 6 pin 25 not connected
[ 0.064597] apic 6 pin 26 not connected
[ 0.064597] apic 6 pin 27 not connected
[ 0.064598] apic 6 pin 28 not connected
[ 0.064598] apic 6 pin 29 not connected
[ 0.064599] apic 6 pin 30 not connected
[ 0.064600] apic 6 pin 31 not connected
[ 0.064739] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080534] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325ae63db2a, max_idle_ns: 440795332196 ns
[ 0.080538] Calibrating delay loop (skipped), value calculated using timer frequency.. 6989.88 BogoMIPS (lpj=11644610)
[ 0.080550] AMD Zen1 DIV0 bug detected. Disable SMT for full protection.
[ 0.080552] SVM disabled (by BIOS) in MSR_VM_CR
[ 0.080584] LVT offset 1 assigned for vector 0xf9
[ 0.080650] LVT offset 2 assigned for vector 0xf4
[ 0.080666] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.080667] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.080671] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.080673] Spectre V2 : Mitigation: Retpolines
[ 0.080674] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.080674] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.080675] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.080676] RETBleed: Mitigation: untrained return thunk
[ 0.080677] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.080678] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.080683] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.080685] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.080685] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.080687] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.080688] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.099288] Freeing SMP alternatives memory: 40K
[ 0.099292] pid_max: default: 32768 minimum: 301
[ 0.100569] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[ 0.100590] landlock: Up and running.
[ 0.100592] Yama: becoming mindful.
[ 0.100597] LSM support for eBPF active
[ 0.100627] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.100639] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.101339] Using local APIC timer interrupts.
calibrating APIC timer ...
[ 0.208169] ... lapic delta = 623818
[ 0.208170] ... PM-Timer delta = 357949
[ 0.208171] ... PM-Timer result ok
[ 0.208171] ..... delta 623818
[ 0.208172] ..... mult: 26791579
[ 0.208173] ..... calibration result: 332702
[ 0.208173] ..... CPU clock speed is 3493.2437 MHz.
[ 0.208174] ..... host bus clock speed is 99.2735 MHz.
[ 0.208185] smpboot: CPU0: AMD Ryzen 3 1300X Quad-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[ 0.208362] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.208367] ... version: 0
[ 0.208368] ... bit width: 48
[ 0.208369] ... generic registers: 6
[ 0.208369] ... value mask: 0000ffffffffffff
[ 0.208370] ... max period: 00007fffffffffff
[ 0.208371] ... fixed-purpose events: 0
[ 0.208372] ... event mask: 000000000000003f
[ 0.208435] signal: max sigframe size: 1776
[ 0.208462] rcu: Hierarchical SRCU implementation.
[ 0.208463] rcu: Max phase no-delay instances is 1000.
[ 0.210536] MCE: In-kernel MCE decoding enabled.
[ 0.210536] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.210536] smp: Bringing up secondary CPUs ...
[ 0.210536] smpboot: x86: Booting SMP configuration:
[ 0.210536] .... node #0, CPUs: #1 #2 #3
[ 0.003616] masked ExtINT on CPU#1
[ 0.003616] masked ExtINT on CPU#2
[ 0.003616] masked ExtINT on CPU#3
[ 0.215872] smp: Brought up 1 node, 4 CPUs
[ 0.215872] smpboot: Total of 4 processors activated (27958.52 BogoMIPS)
[ 0.217391] devtmpfs: initialized
[ 0.217391] x86/mm: Memory block size: 128MB
[ 0.217846] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
[ 0.217846] ACPI: PM: Registering ACPI NVS region [mem 0xdbce0000-0xdc1effff] (5308416 bytes)
[ 0.217846] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.217846] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.217846] pinctrl core: initialized pinctrl subsystem
[ 0.217846] PM: RTC time: 21:36:01, date: 2024-07-25
[ 0.217858] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.218049] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.218165] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.218286] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.218298] audit: initializing netlink subsys (disabled)
[ 0.218307] audit: type=2000 audit(1721943361.153:1): state=initialized audit_enabled=0 res=1
[ 0.218307] thermal_sys: Registered thermal governor 'fair_share'
[ 0.218307] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.218307] thermal_sys: Registered thermal governor 'step_wise'
[ 0.218307] thermal_sys: Registered thermal governor 'user_space'
[ 0.218307] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.218307] cpuidle: using governor ladder
[ 0.218307] cpuidle: using governor menu
[ 0.218307] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.218307] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[ 0.218307] PCI: Using configuration type 1 for base access
[ 0.218307] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.225572] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.225572] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.225572] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.225572] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.225572] Demotion targets for Node 0: null
[ 0.225572] ACPI: Added _OSI(Module Device)
[ 0.225572] ACPI: Added _OSI(Processor Device)
[ 0.225572] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.225572] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.235117] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.235738] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.237504] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.237689] ACPI: Interpreter enabled
[ 0.237706] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.237708] ACPI: Using IOAPIC for interrupt routing
[ 0.238445] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.238447] PCI: Using E820 reservations for host bridge windows
[ 0.240764] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.246929] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.246935] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.247018] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[ 0.247166] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.247175] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.247571] PCI host bridge to bus 0000:00
[ 0.247573] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.247575] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.247577] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.247578] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.247580] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.247581] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[ 0.247582] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.247584] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.247597] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 conventional PCI endpoint
[ 0.247677] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 conventional PCI endpoint
[ 0.247766] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.247815] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400 PCIe Root Port
[ 0.247828] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.247833] pci 0000:00:01.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.247923] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.248103] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 PCIe Root Port
[ 0.248117] pci 0000:00:01.3: PCI bridge to [bus 02-0a]
[ 0.248120] pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
[ 0.248122] pci 0000:00:01.3: bridge window [mem 0xf6400000-0xf77fffff]
[ 0.248128] pci 0000:00:01.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.248209] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[ 0.248415] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.248478] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.248528] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 PCIe Root Port
[ 0.248547] pci 0000:00:03.1: PCI bridge to [bus 0b]
[ 0.248551] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.248553] pci 0000:00:03.1: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.248560] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.248885] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.249088] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.249154] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.249200] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 PCIe Root Port
[ 0.249213] pci 0000:00:07.1: PCI bridge to [bus 0c]
[ 0.249217] pci 0000:00:07.1: bridge window [mem 0xf7800000-0xf7afffff]
[ 0.249234] pci 0000:00:07.1: enabling Extended Tags
[ 0.249299] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.249472] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint
[ 0.249521] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 PCIe Root Port
[ 0.249535] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.249539] pci 0000:00:08.1: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.249810] pci 0000:00:08.1: enabling Extended Tags
[ 0.249878] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.250089] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.250297] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.250512] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 conventional PCI endpoint
[ 0.250552] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 conventional PCI endpoint
[ 0.250585] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 conventional PCI endpoint
[ 0.250618] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 conventional PCI endpoint
[ 0.250651] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 conventional PCI endpoint
[ 0.250683] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 conventional PCI endpoint
[ 0.250716] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 conventional PCI endpoint
[ 0.250748] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 conventional PCI endpoint
[ 0.250857] pci 0000:01:00.0: [144d:a804] type 00 class 0x010802 PCIe Endpoint
[ 0.250872] pci 0000:01:00.0: BAR 0 [mem 0xf7c00000-0xf7c03fff 64bit]
[ 0.251073] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.251148] pci 0000:02:00.0: [1022:43bb] type 00 class 0x0c0330 PCIe Legacy Endpoint
[ 0.251164] pci 0000:02:00.0: BAR 0 [mem 0xf77a0000-0xf77a7fff 64bit]
[ 0.251247] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.251392] pci 0000:02:00.1: [1022:43b7] type 00 class 0x010601 PCIe Legacy Endpoint
[ 0.251433] pci 0000:02:00.1: BAR 5 [mem 0xf7780000-0xf779ffff]
[ 0.251440] pci 0000:02:00.1: ROM [mem 0xf7700000-0xf777ffff pref]
[ 0.251481] pci 0000:02:00.1: PME# supported from D3hot D3cold
[ 0.251563] pci 0000:02:00.2: [1022:43b2] type 01 class 0x060400 PCIe Switch Upstream Port
[ 0.251588] pci 0000:02:00.2: PCI bridge to [bus 03-0a]
[ 0.251593] pci 0000:02:00.2: bridge window [io 0xd000-0xefff]
[ 0.251596] pci 0000:02:00.2: bridge window [mem 0xf6400000-0xf76fffff]
[ 0.251605] pci 0000:02:00.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.251655] pci 0000:02:00.2: PME# supported from D3hot D3cold
[ 0.251754] pci 0000:00:01.3: PCI bridge to [bus 02-0a]
[ 0.251840] pci 0000:03:00.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.251866] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.251947] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.252052] pci 0000:03:01.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.252078] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.252158] pci 0000:03:01.0: PME# supported from D3hot D3cold
[ 0.252264] pci 0000:03:04.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.252290] pci 0000:03:04.0: PCI bridge to [bus 06]
[ 0.252296] pci 0000:03:04.0: bridge window [io 0xe000-0xefff]
[ 0.252299] pci 0000:03:04.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 0.252308] pci 0000:03:04.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.252374] pci 0000:03:04.0: PME# supported from D3hot D3cold
[ 0.252481] pci 0000:03:05.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.252507] pci 0000:03:05.0: PCI bridge to [bus 07]
[ 0.252587] pci 0000:03:05.0: PME# supported from D3hot D3cold
[ 0.252694] pci 0000:03:06.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.252720] pci 0000:03:06.0: PCI bridge to [bus 08-09]
[ 0.252726] pci 0000:03:06.0: bridge window [io 0xd000-0xdfff]
[ 0.252729] pci 0000:03:06.0: bridge window [mem 0xf6400000-0xf74fffff]
[ 0.252802] pci 0000:03:06.0: PME# supported from D3hot D3cold
[ 0.252910] pci 0000:03:07.0: [1022:43b4] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.252936] pci 0000:03:07.0: PCI bridge to [bus 0a]
[ 0.253016] pci 0000:03:07.0: PME# supported from D3hot D3cold
[ 0.253129] pci 0000:02:00.2: PCI bridge to [bus 03-0a]
[ 0.253168] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.253213] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.253286] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[ 0.253313] pci 0000:06:00.0: BAR 0 [io 0xe000-0xe0ff]
[ 0.253348] pci 0000:06:00.0: BAR 2 [mem 0xf7600000-0xf7600fff 64bit]
[ 0.253370] pci 0000:06:00.0: BAR 4 [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.253519] pci 0000:06:00.0: supports D1 D2
[ 0.253520] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.253731] pci 0000:03:04.0: PCI bridge to [bus 06]
[ 0.253771] pci 0000:03:05.0: PCI bridge to [bus 07]
[ 0.253863] pci 0000:08:00.0: [8086:10c9] type 00 class 0x020000 PCIe Endpoint
[ 0.253899] pci 0000:08:00.0: BAR 0 [mem 0xf7420000-0xf743ffff]
[ 0.253919] pci 0000:08:00.0: BAR 1 [mem 0xf7000000-0xf73fffff]
[ 0.253939] pci 0000:08:00.0: BAR 2 [io 0xd020-0xd03f]
[ 0.253958] pci 0000:08:00.0: BAR 3 [mem 0xf74c4000-0xf74c7fff]
[ 0.254015] pci 0000:08:00.0: ROM [mem 0xf6c00000-0xf6ffffff pref]
[ 0.254187] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.254264] pci 0000:08:00.0: VF BAR 0 [mem 0xf74a0000-0xf74a3fff 64bit]
[ 0.254265] pci 0000:08:00.0: VF BAR 0 [mem 0xf74a0000-0xf74bffff 64bit]: contains BAR 0 for 8 VFs
[ 0.254313] pci 0000:08:00.0: VF BAR 3 [mem 0xf7480000-0xf7483fff 64bit]
[ 0.254314] pci 0000:08:00.0: VF BAR 3 [mem 0xf7480000-0xf749ffff 64bit]: contains BAR 3 for 8 VFs
[ 0.254514] pci 0000:08:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:03:06.0 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 0.254671] pci 0000:08:00.1: [8086:10c9] type 00 class 0x020000 PCIe Endpoint
[ 0.254707] pci 0000:08:00.1: BAR 0 [mem 0xf7400000-0xf741ffff]
[ 0.254727] pci 0000:08:00.1: BAR 1 [mem 0xf6800000-0xf6bfffff]
[ 0.254746] pci 0000:08:00.1: BAR 2 [io 0xd000-0xd01f]
[ 0.254766] pci 0000:08:00.1: BAR 3 [mem 0xf74c0000-0xf74c3fff]
[ 0.254823] pci 0000:08:00.1: ROM [mem 0xf6400000-0xf67fffff pref]
[ 0.254994] pci 0000:08:00.1: PME# supported from D0 D3hot D3cold
[ 0.255070] pci 0000:08:00.1: VF BAR 0 [mem 0xf7460000-0xf7463fff 64bit]
[ 0.255071] pci 0000:08:00.1: VF BAR 0 [mem 0xf7460000-0xf747ffff 64bit]: contains BAR 0 for 8 VFs
[ 0.255119] pci 0000:08:00.1: VF BAR 3 [mem 0xf7440000-0xf7443fff 64bit]
[ 0.255120] pci 0000:08:00.1: VF BAR 3 [mem 0xf7440000-0xf745ffff 64bit]: contains BAR 3 for 8 VFs
[ 0.255463] pci 0000:03:06.0: PCI bridge to [bus 08-09]
[ 0.255503] pci 0000:03:07.0: PCI bridge to [bus 0a]
[ 0.255884] pci 0000:0b:00.0: [10de:1d01] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.255901] pci 0000:0b:00.0: BAR 0 [mem 0xf5000000-0xf5ffffff]
[ 0.255914] pci 0000:0b:00.0: BAR 1 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.255928] pci 0000:0b:00.0: BAR 3 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.255937] pci 0000:0b:00.0: BAR 5 [io 0xf000-0xf07f]
[ 0.255946] pci 0000:0b:00.0: ROM [mem 0xf6000000-0xf607ffff pref]
[ 0.255980] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.256118] pci 0000:0b:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:03.1 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 0.256208] pci 0000:0b:00.1: [10de:0fb8] type 00 class 0x040300 PCIe Endpoint
[ 0.256225] pci 0000:0b:00.1: BAR 0 [mem 0xf6080000-0xf6083fff]
[ 0.256418] pci 0000:00:03.1: PCI bridge to [bus 0b]
[ 0.256485] pci 0000:0c:00.0: [1022:145a] type 00 class 0x130000 PCIe Endpoint
[ 0.256508] pci 0000:0c:00.0: enabling Extended Tags
[ 0.256594] pci 0000:0c:00.2: [1022:1456] type 00 class 0x108000 PCIe Endpoint
[ 0.256606] pci 0000:0c:00.2: BAR 2 [mem 0xf7900000-0xf79fffff]
[ 0.256614] pci 0000:0c:00.2: BAR 5 [mem 0xf7a00000-0xf7a01fff]
[ 0.256620] pci 0000:0c:00.2: enabling Extended Tags
[ 0.256719] pci 0000:0c:00.3: [1022:145c] type 00 class 0x0c0330 PCIe Endpoint
[ 0.256728] pci 0000:0c:00.3: BAR 0 [mem 0xf7800000-0xf78fffff 64bit]
[ 0.256747] pci 0000:0c:00.3: enabling Extended Tags
[ 0.256775] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold
[ 0.256859] pci 0000:00:07.1: PCI bridge to [bus 0c]
[ 0.256933] pci 0000:0d:00.0: [1022:1455] type 00 class 0x130000 PCIe Endpoint
[ 0.256956] pci 0000:0d:00.0: enabling Extended Tags
[ 0.257050] pci 0000:0d:00.2: [1022:7901] type 00 class 0x010601 PCIe Endpoint
[ 0.257074] pci 0000:0d:00.2: BAR 5 [mem 0xf7b08000-0xf7b08fff]
[ 0.257082] pci 0000:0d:00.2: enabling Extended Tags
[ 0.257113] pci 0000:0d:00.2: PME# supported from D3hot D3cold
[ 0.257187] pci 0000:0d:00.3: [1022:1457] type 00 class 0x040300 PCIe Endpoint
[ 0.257194] pci 0000:0d:00.3: BAR 0 [mem 0xf7b00000-0xf7b07fff]
[ 0.257217] pci 0000:0d:00.3: enabling Extended Tags
[ 0.257247] pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold
[ 0.257326] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.257709] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.257761] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.257805] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.257862] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.257911] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.257953] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.257993] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.258034] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.258532] iommu: Default domain type: Translated
[ 0.258532] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.258532] SCSI subsystem initialized
[ 0.258532] libata version 3.00 loaded.
[ 0.258532] ACPI: bus type USB registered
[ 0.258532] usbcore: registered new interface driver usbfs
[ 0.258532] usbcore: registered new interface driver hub
[ 0.258532] usbcore: registered new device driver usb
[ 0.258532] EDAC MC: Ver: 3.0.0
[ 0.260709] efivars: Registered efivars operations
[ 0.260711] NetLabel: Initializing
[ 0.260711] NetLabel: domain hash size = 128
[ 0.260711] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.260722] NetLabel: unlabeled traffic allowed by default
[ 0.260726] mctp: management component transport protocol core
[ 0.260727] NET: Registered PF_MCTP protocol family
[ 0.260730] PCI: Using ACPI for IRQ routing
[ 0.263361] PCI: pci_cache_line_size set to 64 bytes
[ 0.263437] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[ 0.263438] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.263439] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.263440] e820: reserve RAM buffer [mem 0xceb12018-0xcfffffff]
[ 0.263441] e820: reserve RAM buffer [mem 0xceb32018-0xcfffffff]
[ 0.263442] e820: reserve RAM buffer [mem 0xceb63018-0xcfffffff]
[ 0.263443] e820: reserve RAM buffer [mem 0xceb94018-0xcfffffff]
[ 0.263444] e820: reserve RAM buffer [mem 0xd8135000-0xdbffffff]
[ 0.263445] e820: reserve RAM buffer [mem 0xda4d8000-0xdbffffff]
[ 0.263446] e820: reserve RAM buffer [mem 0xdbb66000-0xdbffffff]
[ 0.263447] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.263448] e820: reserve RAM buffer [mem 0x21f380000-0x21fffffff]
[ 0.263885] pci 0000:0b:00.0: vgaarb: setting as boot VGA device
[ 0.263885] pci 0000:0b:00.0: vgaarb: bridge control possible
[ 0.263885] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.263885] vgaarb: loaded
[ 0.263913] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.263917] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.267204] clocksource: Switched to clocksource tsc-early
[ 0.267211] VFS: Disk quotas dquot_6.6.0
[ 0.267211] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.267780] pnp: PnP ACPI init
[ 0.267868] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.268089] system 00:02: [io 0x0a00-0x0a2f] has been reserved
[ 0.268091] system 00:02: [io 0x0a30-0x0a3f] has been reserved
[ 0.268093] system 00:02: [io 0x0a40-0x0a4f] has been reserved
[ 0.268355] pnp 00:03: [dma 0 disabled]
[ 0.268591] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.268593] system 00:04: [io 0x040b] has been reserved
[ 0.268594] system 00:04: [io 0x04d6] has been reserved
[ 0.268596] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.268597] system 00:04: [io 0x0c14] has been reserved
[ 0.268598] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.268599] system 00:04: [io 0x0c52] has been reserved
[ 0.268600] system 00:04: [io 0x0c6c] has been reserved
[ 0.268601] system 00:04: [io 0x0c6f] has been reserved
[ 0.268602] system 00:04: [io 0x0cd0-0x0cd1] has been reserved
[ 0.268604] system 00:04: [io 0x0cd2-0x0cd3] has been reserved
[ 0.268605] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.268606] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.268608] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.268609] system 00:04: [io 0x0800-0x089f] has been reserved
[ 0.268611] system 00:04: [io 0x0b00-0x0b0f] has been reserved
[ 0.268612] system 00:04: [io 0x0b20-0x0b3f] has been reserved
[ 0.268613] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.268614] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.268615] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.268617] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.268619] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.268621] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.268622] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.268624] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.268625] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.269001] pnp: PnP ACPI: found 5 devices
[ 0.274800] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.274851] NET: Registered PF_INET protocol family
[ 0.274955] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.286738] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.286768] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.286805] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.286986] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.287098] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.287158] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.287187] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.287209] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.287251] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.287263] NET: Registered PF_XDP protocol family
[ 0.287282] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.287288] pci 0000:00:01.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.287294] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.287303] pci 0000:03:01.0: PCI bridge to [bus 05]
[ 0.287313] pci 0000:03:04.0: PCI bridge to [bus 06]
[ 0.287315] pci 0000:03:04.0: bridge window [io 0xe000-0xefff]
[ 0.287320] pci 0000:03:04.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 0.287323] pci 0000:03:04.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.287328] pci 0000:03:05.0: PCI bridge to [bus 07]
[ 0.287337] pci 0000:03:06.0: PCI bridge to [bus 08-09]
[ 0.287339] pci 0000:03:06.0: bridge window [io 0xd000-0xdfff]
[ 0.287343] pci 0000:03:06.0: bridge window [mem 0xf6400000-0xf74fffff]
[ 0.287350] pci 0000:03:07.0: PCI bridge to [bus 0a]
[ 0.287359] pci 0000:02:00.2: PCI bridge to [bus 03-0a]
[ 0.287360] pci 0000:02:00.2: bridge window [io 0xd000-0xefff]
[ 0.287364] pci 0000:02:00.2: bridge window [mem 0xf6400000-0xf76fffff]
[ 0.287367] pci 0000:02:00.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.287371] pci 0000:00:01.3: PCI bridge to [bus 02-0a]
[ 0.287373] pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
[ 0.287375] pci 0000:00:01.3: bridge window [mem 0xf6400000-0xf77fffff]
[ 0.287377] pci 0000:00:01.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.287382] pci 0000:00:03.1: PCI bridge to [bus 0b]
[ 0.287383] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.287386] pci 0000:00:03.1: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.287388] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.287393] pci 0000:00:07.1: PCI bridge to [bus 0c]
[ 0.287395] pci 0000:00:07.1: bridge window [mem 0xf7800000-0xf7afffff]
[ 0.287399] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.287401] pci 0000:00:08.1: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.287407] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.287408] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.287410] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.287411] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.287412] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.287413] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfec2ffff window]
[ 0.287414] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[ 0.287416] pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.287417] pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
[ 0.287418] pci_bus 0000:02: resource 1 [mem 0xf6400000-0xf77fffff]
[ 0.287419] pci_bus 0000:02: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.287421] pci_bus 0000:03: resource 0 [io 0xd000-0xefff]
[ 0.287422] pci_bus 0000:03: resource 1 [mem 0xf6400000-0xf76fffff]
[ 0.287423] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.287425] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.287426] pci_bus 0000:06: resource 1 [mem 0xf7600000-0xf76fffff]
[ 0.287427] pci_bus 0000:06: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.287428] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
[ 0.287429] pci_bus 0000:08: resource 1 [mem 0xf6400000-0xf74fffff]
[ 0.287431] pci_bus 0000:0b: resource 0 [io 0xf000-0xffff]
[ 0.287432] pci_bus 0000:0b: resource 1 [mem 0xf5000000-0xf60fffff]
[ 0.287433] pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.287434] pci_bus 0000:0c: resource 1 [mem 0xf7800000-0xf7afffff]
[ 0.287436] pci_bus 0000:0d: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.287597] IOAPIC[1]: Preconfigured routing entry (6-8 -> IRQ 24 Level:1 ActiveLow:1)
[ 0.287687] pci 0000:0b:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.287717] pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0
[ 0.287846] IOAPIC[1]: Preconfigured routing entry (6-20 -> IRQ 24 Level:1 ActiveLow:1)
[ 0.287871] IOAPIC[1]: Preconfigured routing entry (6-13 -> IRQ 25 Level:1 ActiveLow:1)
[ 0.287912] PCI: CLS 64 bytes, default 64
[ 0.287979] Trying to unpack rootfs image as initramfs...
[ 0.288466] Initialise system trusted keyrings
[ 0.288479] Key type blacklist registered
[ 0.288515] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.288522] zbud: loaded
[ 0.288614] fuse: init (API version 7.40)
[ 0.288684] integrity: Platform Keyring initialized
[ 0.288687] integrity: Machine keyring initialized
[ 0.299364] Key type asymmetric registered
[ 0.299366] Asymmetric key parser 'x509' registered
[ 0.299387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.299445] io scheduler mq-deadline registered
[ 0.299447] io scheduler kyber registered
[ 0.299459] io scheduler bfq registered
[ 0.301082] pcieport 0000:00:01.1: PME: Signaling with IRQ 25
[ 0.301142] pcieport 0000:00:01.1: AER: enabled with IRQ 25
[ 0.301594] pcieport 0000:00:01.3: PME: Signaling with IRQ 26
[ 0.301640] pcieport 0000:00:01.3: AER: enabled with IRQ 26
[ 0.301845] pcieport 0000:00:03.1: PME: Signaling with IRQ 27
[ 0.301910] pcieport 0000:00:03.1: AER: enabled with IRQ 27
[ 0.302439] pcieport 0000:00:07.1: PME: Signaling with IRQ 28
[ 0.302498] pcieport 0000:00:07.1: AER: enabled with IRQ 28
[ 0.302607] IOAPIC[1]: Preconfigured routing entry (6-8 -> IRQ 29 Level:1 ActiveLow:1)
[ 0.302754] pcieport 0000:00:08.1: PME: Signaling with IRQ 30
[ 0.302805] pcieport 0000:00:08.1: AER: enabled with IRQ 30
[ 0.302885] IOAPIC[1]: Preconfigured routing entry (6-10 -> IRQ 31 Level:1 ActiveLow:1)
[ 0.303070] IOAPIC[1]: Preconfigured routing entry (6-9 -> IRQ 33 Level:1 ActiveLow:1)
[ 0.303500] IOAPIC[1]: Preconfigured routing entry (6-11 -> IRQ 38 Level:1 ActiveLow:1)
[ 0.303624] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.303722] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.303737] ACPI: button: Power Button [PWRB]
[ 0.303760] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.306610] ACPI: button: Power Button [PWRF]
[ 0.310155] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.310369] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.312058] Non-volatile memory driver v1.3
[ 0.312060] Linux agpgart interface v0.103
[ 0.312096] ACPI: bus type drm_connector registered
[ 0.316753] ahci 0000:02:00.1: version 3.0
[ 0.316861] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[ 0.316897] ahci 0000:02:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.316900] ahci 0000:02:00.1: 4/8 ports implemented (port mask 0x33)
[ 0.316901] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.317297] scsi host0: ahci
[ 0.317389] scsi host1: ahci
[ 0.317466] scsi host2: ahci
[ 0.317535] scsi host3: ahci
[ 0.317606] scsi host4: ahci
[ 0.317681] scsi host5: ahci
[ 0.317749] scsi host6: ahci
[ 0.317821] scsi host7: ahci
[ 0.317845] ata1: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780100 irq 40 lpm-pol 3
[ 0.317847] ata2: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780180 irq 40 lpm-pol 3
[ 0.317849] ata3: DUMMY
[ 0.317849] ata4: DUMMY
[ 0.317851] ata5: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780300 irq 40 lpm-pol 3
[ 0.317852] ata6: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780380 irq 40 lpm-pol 3
[ 0.317853] ata7: DUMMY
[ 0.317854] ata8: DUMMY
[ 0.317917] IOAPIC[1]: Preconfigured routing entry (6-18 -> IRQ 41 Level:1 ActiveLow:1)
[ 0.317983] ahci 0000:0d:00.2: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.317986] ahci 0000:0d:00.2: 2/2 ports implemented (port mask 0x3)
[ 0.317987] ahci 0000:0d:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs
[ 0.318159] scsi host8: ahci
[ 0.318361] scsi host9: ahci
[ 0.318392] ata9: SATA max UDMA/133 abar m4096@0xf7b08000 port 0xf7b08100 irq 42 lpm-pol 0
[ 0.318394] ata10: SATA max UDMA/133 abar m4096@0xf7b08000 port 0xf7b08180 irq 42 lpm-pol 0
[ 0.318487] usbcore: registered new interface driver usbserial_generic
[ 0.318492] usbserial: USB Serial support registered for generic
[ 0.318548] rtc_cmos 00:01: RTC can wake from S4
[ 0.318917] rtc_cmos 00:01: registered as rtc0
[ 0.318979] rtc_cmos 00:01: setting system clock to 2024-07-25T21:36:01 UTC (1721943361)
[ 0.319013] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.319044] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[ 0.319077] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.319196] Relocating firmware framebuffer to offset 0x0000000001000000[d] within [mem 0xf0000000-0xf1ffffff flags 0x14220c]
[ 0.319343] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 0.319792] fbcon: Deferring console take-over
[ 0.319795] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.319841] hid: raw HID events driver (C) Jiri Kosina
[ 0.319895] drop_monitor: Initializing network drop monitor service
[ 0.319981] NET: Registered PF_INET6 protocol family
[ 0.326712] Freeing initrd memory: 8988K
[ 0.330955] Segment Routing with IPv6
[ 0.330957] RPL Segment Routing with IPv6
[ 0.330966] In-situ OAM (IOAM) with IPv6
[ 0.330991] NET: Registered PF_PACKET protocol family
[ 0.331302] microcode: Current revision: 0x08001137
[ 0.331367] IPI shorthand broadcast: enabled
[ 0.331398] ... APIC ID: 00000000 (0)
[ 0.331400] ... APIC VERSION: 80050010
[ 0.331402] 0000000000000000000000000000000000000000000000000000000000000000
[ 0.331407] 0000000000000000000000000000000000000000000000000000000000000000
[ 0.331411] 0000000000000000000000000000000000000000000000000000000000000000
[ 0.331417] number of MP IRQ sources: 15.
[ 0.331418] number of IO-APIC #5 registers: 24.
[ 0.331419] number of IO-APIC #6 registers: 32.
[ 0.331420] testing the IO APIC.......................
[ 0.331431] IO APIC #5......
[ 0.331432] .... register #00: 05000000
[ 0.331432] ....... : physical APIC id: 05
[ 0.331433] ....... : Delivery Type: 0
[ 0.331434] ....... : LTS : 0
[ 0.331434] .... register #01: 00178021
[ 0.331435] ....... : max redirection entries: 17
[ 0.331436] ....... : PRQ implemented: 1
[ 0.331436] ....... : IO APIC version: 21
[ 0.331437] .... register #02: 05000000
[ 0.331437] ....... : arbitration: 05
[ 0.331438] .... register #03: 00000000
[ 0.331439] ....... : Boot DT : 0
[ 0.331439] .... IRQ redirection table:
[ 0.331440] IOAPIC 0:
[ 0.331446] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331452] pin01, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331458] pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(0001), M(0)
[ 0.331464] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331470] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331477] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331482] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331489] pin07, enabled , level, low , V(20), IRR(0), S(0), logical , D(0004), M(0)
[ 0.331495] pin08, enabled , edge , high, V(23), IRR(0), S(0), logical , D(0001), M(0)
[ 0.331501] pin09, enabled , level, low , V(20), IRR(0), S(0), logical , D(0002), M(0)
[ 0.331507] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331513] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331519] pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331525] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331531] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331537] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331543] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331549] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331555] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331562] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331568] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331574] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331580] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331586] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331589] IO APIC #6......
[ 0.331590] .... register #00: 06000000
[ 0.331590] ....... : physical APIC id: 06
[ 0.331591] ....... : Delivery Type: 0
[ 0.331591] ....... : LTS : 0
[ 0.331592] .... register #01: 001F8021
[ 0.331593] ....... : max redirection entries: 1F
[ 0.331593] ....... : PRQ implemented: 1
[ 0.331594] ....... : IO APIC version: 21
[ 0.331594] .... register #02: 00000000
[ 0.331595] ....... : arbitration: 00
[ 0.331595] .... IRQ redirection table:
[ 0.331596] IOAPIC 1:
[ 0.331598] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331600] pin01, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331603] pin02, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331605] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331608] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331610] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331613] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331615] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331617] pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331620] pin09, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331622] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331625] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331627] pin0c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331629] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331632] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331634] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331637] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331639] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331641] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331644] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331646] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331649] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331651] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331653] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331656] pin18, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331658] pin19, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331661] pin1a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331663] pin1b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331665] pin1c, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331668] pin1d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331670] pin1e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331673] pin1f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(0000), M(0)
[ 0.331673] IRQ to pin mappings:
[ 0.331675] IRQ0 -> 0:2
[ 0.331677] IRQ1 -> 0:1
[ 0.331679] IRQ3 -> 0:3
[ 0.331680] IRQ4 -> 0:4
[ 0.331682] IRQ5 -> 0:5
[ 0.331683] IRQ6 -> 0:6
[ 0.331685] IRQ7 -> 0:7
[ 0.331686] IRQ8 -> 0:8
[ 0.331688] IRQ9 -> 0:9
[ 0.331689] IRQ10 -> 0:10
[ 0.331690] IRQ11 -> 0:11
[ 0.331692] IRQ12 -> 0:12
[ 0.331693] IRQ13 -> 0:13
[ 0.331695] IRQ14 -> 0:14
[ 0.331696] IRQ15 -> 0:15
[ 0.331698] IRQ24 -> 1:20
[ 0.331700] IRQ29 -> 1:8
[ 0.331702] IRQ31 -> 1:10
[ 0.331704] IRQ33 -> 1:9
[ 0.331706] IRQ38 -> 1:11
[ 0.331708] IRQ41 -> 1:18
[ 0.331710] .................................... done.
[ 0.333085] sched_clock: Marking stable (331074182, 283249)->(333578944, -2221513)
[ 0.333164] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.333202] registered taskstats version 1
[ 0.333405] Loading compiled-in X.509 certificates
[ 0.336228] Loaded X.509 cert 'Build time autogenerated kernel key: 55738377825f7b26692b49e2909156f6b0cd86dd'
[ 0.338915] zswap: loaded using pool zstd/zsmalloc
[ 0.338969] Demotion targets for Node 0: null
[ 0.339231] Key type .fscrypt registered
[ 0.339233] Key type fscrypt-provisioning registered
[ 0.340173] PM: Magic number: 0:695:652
[ 0.340185] scsi_host host6: hash matches
[ 0.340187] scsi host6: hash matches
[ 0.340257] acpi LNXCPU:05: hash matches
[ 0.342509] RAS: Correctable Errors collector initialized.
[ 0.352881] clk: Disabling unused clocks
[ 0.352885] PM: genpd: Disabling unused power domains
[ 0.629297] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.634407] ata9: SATA link down (SStatus 0 SControl 300)
[ 0.635425] ata10: SATA link down (SStatus 0 SControl 300)
[ 0.944401] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.259746] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.290291] tsc: Refined TSC clocksource calibration: 3493.437 MHz
[ 1.290294] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325b1901053, max_idle_ns: 440795306184 ns
[ 1.290307] clocksource: Switched to clocksource tsc
[ 1.573075] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.574341] Freeing unused decrypted memory: 2028K
[ 1.574741] Freeing unused kernel image (initmem) memory: 3424K
[ 1.574759] Write protecting the kernel read-only data: 32768k
[ 1.574993] Freeing unused kernel image (rodata/data gap) memory: 936K
[ 1.617918] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.617923] rodata_test: all tests were successful
[ 1.617930] Run /init as init process
[ 1.617931] with arguments:
[ 1.617932] /init
[ 1.617933] with environment:
[ 1.617934] HOME=/
[ 1.617934] TERM=linux
[ 1.617935] BOOT_IMAGE=/boot/vmlinuz-linux-mainline
[ 1.651491] fbcon: Taking over console
[ 1.656423] Console: switching to colour frame buffer device 128x48
[ 1.752846] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.752855] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 1.769407] nvme nvme0: pci function 0000:01:00.0
[ 1.769485] IOAPIC[1]: Preconfigured routing entry (6-0 -> IRQ 43 Level:1 ActiveLow:1)
[ 1.787672] nvme nvme0: 4/0/0 default/read/poll queues
[ 1.808186] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000010048000010
[ 1.808363] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.808366] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.808370] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.808422] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 1.808425] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.808426] usb usb1: Product: xHCI Host Controller
[ 1.808427] usb usb1: Manufacturer: Linux 6.10.0-1.1-mainline-dirty xhci-hcd
[ 1.808429] usb usb1: SerialNumber: 0000:02:00.0
[ 1.808563] hub 1-0:1.0: USB hub found
[ 1.808578] hub 1-0:1.0: 10 ports detected
[ 1.808870] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.808888] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10
[ 1.808890] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.808891] usb usb2: Product: xHCI Host Controller
[ 1.808892] usb usb2: Manufacturer: Linux 6.10.0-1.1-mainline-dirty xhci-hcd
[ 1.808894] usb usb2: SerialNumber: 0000:02:00.0
[ 1.808962] hub 2-0:1.0: USB hub found
[ 1.808969] hub 2-0:1.0: 4 ports detected
[ 1.809049] usb: port power management may be unreliable
[ 1.809181] IOAPIC[1]: Preconfigured routing entry (6-13 -> IRQ 50 Level:1 ActiveLow:1)
[ 1.809203] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[ 1.809207] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3
[ 1.809296] xhci_hcd 0000:0c:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000010
[ 1.809399] xhci_hcd 0000:0c:00.3: xHCI Host Controller
[ 1.809401] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4
[ 1.809403] xhci_hcd 0000:0c:00.3: Host supports USB 3.0 SuperSpeed
[ 1.809429] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 1.809431] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.809432] usb usb3: Product: xHCI Host Controller
[ 1.809433] usb usb3: Manufacturer: Linux 6.10.0-1.1-mainline-dirty xhci-hcd
[ 1.809434] usb usb3: SerialNumber: 0000:0c:00.3
[ 1.809512] hub 3-0:1.0: USB hub found
[ 1.809519] hub 3-0:1.0: 4 ports detected
[ 1.809682] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.809701] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10
[ 1.809702] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.809704] usb usb4: Product: xHCI Host Controller
[ 1.809705] usb usb4: Manufacturer: Linux 6.10.0-1.1-mainline-dirty xhci-hcd
[ 1.809706] usb usb4: SerialNumber: 0000:0c:00.3
[ 1.809778] hub 4-0:1.0: USB hub found
[ 1.809785] hub 4-0:1.0: 4 ports detected
[ 1.810210] nvme0n1: p1 p2 p3 p4 p5
[ 1.917701] EXT4-fs (nvme0n1p2): mounted filesystem e317bc8b-4ecb-4d50-8a10-16c83daf75b3 r/w with ordered data mode. Quota mode: none.
[ 1.987945] systemd[1]: systemd 256.3-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[ 1.987950] systemd[1]: Detected architecture x86-64.
[ 1.988747] systemd[1]: Hostname set to <aquilonia>.
[ 2.056964] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 2.218359] usb 1-5: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 2.218364] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.218366] usb 1-5: Product: USB 2.0 Hub
[ 2.223373] hub 1-5:1.0: USB hub found
[ 2.226345] hub 1-5:1.0: 4 ports detected
[ 2.245950] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 2.307888] systemd[1]: /usr/lib/systemd/system/shorewall6.service:17: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 2.309241] systemd[1]: /usr/lib/systemd/system/shorewall.service:16: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 2.374349] systemd[1]: Queued start job for default target Graphical Interface.
[ 2.411294] systemd[1]: Created slice Slice /system/dirmngr.
[ 2.411669] systemd[1]: Created slice Slice /system/getty.
[ 2.411972] systemd[1]: Created slice Slice /system/gpg-agent.
[ 2.412281] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 2.412590] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 2.412897] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 2.413202] systemd[1]: Created slice Slice /system/keyboxd.
[ 2.413512] systemd[1]: Created slice Slice /system/modprobe.
[ 2.414271] systemd[1]: Created slice Slice /system/netctl.
[ 2.414691] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 2.415002] systemd[1]: Created slice User and Session Slice.
[ 2.415188] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.415373] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.415658] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.415837] systemd[1]: Expecting device /dev/disk/by-uuid/0b65f5a0-93cf-4a0a-8a8f-f4bf9226f42c...
[ 2.415984] systemd[1]: Expecting device /dev/disk/by-uuid/239d593f-624d-4dea-9861-d6b13c23eb78...
[ 2.416129] systemd[1]: Expecting device /dev/disk/by-uuid/9607-240E...
[ 2.416248] systemd[1]: Expecting device /dev/disk/by-uuid/be771001-b8ee-4984-9a81-5e565c762a52...
[ 2.416392] systemd[1]: Expecting device /sys/subsystem/net/devices/enp6s0...
[ 2.416517] systemd[1]: Expecting device /sys/subsystem/net/devices/enp8s0f0...
[ 2.416649] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.416780] systemd[1]: Reached target Login Prompts.
[ 2.416906] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 2.417063] systemd[1]: Reached target Host and Network Name Lookups.
[ 2.417201] systemd[1]: Reached target Remote File Systems.
[ 2.417330] systemd[1]: Reached target Slice Units.
[ 2.417467] systemd[1]: Reached target Local Verity Protected Volumes.
[ 2.417676] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.417891] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.421014] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 2.421105] systemd[1]: Reached target RPC Port Mapper.
[ 2.422387] systemd[1]: Listening on Process Core Dump Socket.
[ 2.423130] systemd[1]: Listening on Credential Encryption/Decryption.
[ 2.423245] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.423353] systemd[1]: Listening on Journal Sockets.
[ 2.423697] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.423714] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.423800] systemd[1]: Listening on udev Control Socket.
[ 2.424088] systemd[1]: Listening on udev Kernel Socket.
[ 2.425146] systemd[1]: Mounting Huge Pages File System...
[ 2.426262] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.427915] systemd[1]: Mounting Kernel Debug File System...
[ 2.430335] systemd[1]: Mounting Kernel Trace File System...
[ 2.431835] systemd[1]: Starting Create List of Static Device Nodes...
[ 2.434082] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 2.436237] systemd[1]: Starting Load Kernel Module configfs...
[ 2.438031] systemd[1]: Starting Load Kernel Module dm_mod...
[ 2.440101] systemd[1]: Starting Load Kernel Module drm...
[ 2.441678] systemd[1]: Starting Load Kernel Module fuse...
[ 2.444023] systemd[1]: Starting Load Kernel Module loop...
[ 2.446551] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 2.446605] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 2.449730] systemd[1]: Starting Journal Service...
[ 2.453776] device-mapper: uevent: version 1.0.3
[ 2.456766] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 2.456791] systemd[1]: Starting Load Kernel Modules...
[ 2.457124] loop: module loaded
[ 2.459162] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.459923] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.460490] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.463527] systemd[1]: Starting Load udev Rules from Credentials...
[ 2.468133] systemd[1]: Starting Coldplug All udev Devices...
[ 2.473414] systemd[1]: Mounted Huge Pages File System.
[ 2.474280] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.474793] systemd-journald[293]: Collecting audit messages is disabled.
[ 2.477280] systemd[1]: Mounted Kernel Debug File System.
[ 2.477846] systemd[1]: Mounted Kernel Trace File System.
[ 2.478339] systemd[1]: Finished Create List of Static Device Nodes.
[ 2.478898] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 2.479037] systemd[1]: Finished Load Kernel Module configfs.
[ 2.479554] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 2.479698] systemd[1]: Finished Load Kernel Module dm_mod.
[ 2.480192] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 2.480516] EXT4-fs (nvme0n1p2): re-mounted e317bc8b-4ecb-4d50-8a10-16c83daf75b3 r/w. Quota mode: none.
[ 2.480796] systemd[1]: Finished Load Kernel Module drm.
[ 2.481875] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 2.482022] systemd[1]: Finished Load Kernel Module fuse.
[ 2.482547] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 2.482681] systemd[1]: Finished Load Kernel Module loop.
[ 2.483163] systemd[1]: Finished Load Kernel Modules.
[ 2.483631] systemd[1]: Finished Load udev Rules from Credentials.
[ 2.484139] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.485344] systemd[1]: Mounting FUSE Control File System...
[ 2.490350] systemd[1]: Mounting Kernel Configuration File System...
[ 2.494259] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
[ 2.494324] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 2.505239] systemd[1]: Starting Apply Kernel Variables...
[ 2.507925] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 2.508942] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 2.514967] systemd[1]: Mounted FUSE Control File System.
[ 2.515371] systemd[1]: Mounted Kernel Configuration File System.
[ 2.521352] systemd[1]: Finished Apply Kernel Variables.
[ 2.530898] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[ 2.533807] systemd[1]: Starting Create System Users...
[ 2.567124] systemd[1]: Finished Coldplug All udev Devices.
[ 2.581417] systemd[1]: Finished Create System Users.
[ 2.585376] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.623027] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 2.623426] systemd[1]: Reached target Preparation for Local File Systems.
[ 2.624651] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 2.655457] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ 2.656975] usb 1-5.3: new full-speed USB device number 3 using xhci_hcd
[ 2.714724] systemd[1]: Found device Samsung SSD 960 EVO 250GB 1.
[ 2.735831] systemd[1]: Found device Samsung SSD 960 EVO 250GB var.
[ 2.746111] systemd[1]: Found device Samsung SSD 960 EVO 250GB swap.
[ 2.756269] systemd[1]: Found device Samsung SSD 960 EVO 250GB home.
[ 2.760370] systemd[1]: Activating swap /dev/disk/by-uuid/239d593f-624d-4dea-9861-d6b13c23eb78...
[ 2.766222] systemd[1]: Starting File System Check on /dev/disk/by-uuid/0b65f5a0-93cf-4a0a-8a8f-f4bf9226f42c...
[ 2.777624] systemd[1]: Starting File System Check on /dev/disk/by-uuid/9607-240E...
[ 2.783272] Adding 4194300k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:4194300k SS
[ 2.783434] systemd[1]: Starting File System Check on /dev/disk/by-uuid/be771001-b8ee-4984-9a81-5e565c762a52...
[ 2.797309] systemd[1]: Activated swap /dev/disk/by-uuid/239d593f-624d-4dea-9861-d6b13c23eb78.
[ 2.798881] systemd[1]: Reached target Swaps.
[ 2.800228] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.800235] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 2.802471] ccp 0000:0c:00.2: enabling device (0000 -> 0002)
[ 2.802546] IOAPIC[1]: Preconfigured routing entry (6-12 -> IRQ 52 Level:1 ActiveLow:1)
[ 2.802744] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 2.805221] ccp 0000:0c:00.2: ccp enabled
[ 2.805228] ccp 0000:0c:00.2: psp: unable to access the device: you might be running a broken BIOS.
[ 2.805818] systemd[1]: Finished File System Check on /dev/disk/by-uuid/9607-240E.
[ 2.808461] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 2.808600] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 2.808735] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 2.809334] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 2.810646] systemd[1]: Finished File System Check on /dev/disk/by-uuid/be771001-b8ee-4984-9a81-5e565c762a52.
[ 2.811310] systemd[1]: Finished File System Check on /dev/disk/by-uuid/0b65f5a0-93cf-4a0a-8a8f-f4bf9226f42c.
[ 2.814587] dca service started, version 1.12.1
[ 2.819359] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 2.819361] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 2.821655] pps_core: LinuxPPS API ver. 1 registered
[ 2.821657] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.823353] cryptd: max_cpu_qlen set to 1000
[ 2.825662] PTP clock support registered
[ 2.839063] r8169 0000:06:00.0 eth0: RTL8168g/8111g, e0:d5:5e:68:14:c5, XID 4c0, IRQ 55
[ 2.839069] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 2.867198] AVX2 version of gcm_enc/dec engaged.
[ 2.867229] AES CTR mode by8 optimization enabled
[ 2.867364] igb: Intel(R) Gigabit Ethernet Network Driver
[ 2.867368] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.900385] systemd[1]: Starting Virtual Console Setup...
[ 2.914074] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
[ 2.914224] systemd[1]: Stopped Virtual Console Setup.
[ 2.916324] r8169 0000:06:00.0 enp6s0: renamed from eth0
[ 2.919528] systemd[1]: Starting Virtual Console Setup...
[ 2.920962] IOAPIC[1]: Preconfigured routing entry (6-31 -> IRQ 65 Level:1 ActiveLow:1)
[ 2.920982] snd_hda_intel 0000:0b:00.1: Disabling MSI
[ 2.920991] snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client
[ 2.921136] snd_hda_intel 0000:0d:00.3: enabling device (0000 -> 0002)
[ 2.921168] IOAPIC[1]: Preconfigured routing entry (6-19 -> IRQ 66 Level:1 ActiveLow:1)
[ 2.933350] systemd[1]: Found device RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller (Onboard Ethernet).
[ 2.942827] systemd[1]: Finished Virtual Console Setup.
[ 2.946959] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input3
[ 2.946998] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input4
[ 2.947029] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input5
[ 2.947059] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card0/input6
[ 2.951960] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 2.951966] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.951967] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.951969] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 2.951970] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 2.951975] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 2.951977] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 2.951978] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 2.951979] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 2.958453] systemd[1]: Starting Load Kernel Module dm_mod...
[ 2.960184] systemd[1]: Starting Load Kernel Module loop...
[ 2.960738] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 2.960825] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 2.960966] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
[ 2.961026] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.961105] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.965302] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input7
[ 2.965339] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input8
[ 2.965383] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input9
[ 2.965419] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input10
[ 2.965450] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input11
[ 2.973450] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 2.973478] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 2.973531] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
[ 2.973558] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.973582] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 2.978927] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 2.979090] systemd[1]: Finished Load Kernel Module loop.
[ 2.982175] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 2.982317] systemd[1]: Finished Load Kernel Module dm_mod.
[ 2.983714] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 2.995252] intel_rapl_common: Found RAPL domain package
[ 2.995257] intel_rapl_common: Found RAPL domain core
[ 2.995862] AMD Address Translation Library initialized
[ 3.053005] igb 0000:08:00.0: added PHC on eth0
[ 3.053043] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 3.053045] igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 80:61:5f:0a:2c:fc
[ 3.053129] igb 0000:08:00.0: eth0: PBA No: E43709-006
[ 3.053130] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 3.127359] usb 1-5.3: New USB device found, idVendor=046d, idProduct=c318, bcdDevice=55.03
[ 3.127364] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.127366] usb 1-5.3: Product: Logitech Illuminated Keyboard
[ 3.127368] usb 1-5.3: Manufacturer: Logitech
[ 3.239585] igb 0000:08:00.1: added PHC on eth1
[ 3.239621] igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 3.239622] igb 0000:08:00.1: eth1: (PCIe:2.5Gb/s:Width x1) 80:61:5f:0a:2c:fd
[ 3.239707] igb 0000:08:00.1: eth1: PBA No: E43709-006
[ 3.239708] igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 3.242980] igb 0000:08:00.1 enp8s0f1: renamed from eth1
[ 3.243097] igb 0000:08:00.0 enp8s0f0: renamed from eth0
[ 3.253049] systemd[1]: Found device 82576 Gigabit Network Connection.
[ 3.350298] usb 1-5.4: new low-speed USB device number 4 using xhci_hcd
[ 3.471612] systemd[1]: Mounting /boot/efi...
[ 3.473078] systemd[1]: Mounting /home...
[ 3.475677] systemd[1]: Mounting Temporary Directory /tmp...
[ 3.476113] systemd[1]: var.mount: Directory /var to mount over is not empty, mounting anyway.
[ 3.498259] systemd[1]: Mounting /var...
[ 3.499485] systemd[1]: Mounted Temporary Directory /tmp.
[ 3.501887] EXT4-fs (nvme0n1p5): mounted filesystem be771001-b8ee-4984-9a81-5e565c762a52 r/w with ordered data mode. Quota mode: none.
[ 3.503114] systemd[1]: Mounted /home.
[ 3.505831] EXT4-fs (nvme0n1p4): mounted filesystem 0b65f5a0-93cf-4a0a-8a8f-f4bf9226f42c r/w with ordered data mode. Quota mode: none.
[ 3.507144] systemd[1]: Mounted /var.
[ 3.508305] systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of an unmet condition check (ConditionPathExists=/var/lib/machines.raw).
[ 3.509671] systemd[1]: Starting RPC Bind...
[ 3.513080] systemd[1]: Starting Load/Save OS Random Seed...
[ 3.514047] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 3.517594] systemd[1]: Mounted /boot/efi.
[ 3.518302] systemd[1]: Reached target Local File Systems.
[ 3.519502] systemd[1]: Listening on Boot Entries Service Socket.
[ 3.521029] systemd[1]: Listening on System Extension Image Management.
[ 3.522353] systemd[1]: Starting Rebuild Dynamic Linker Cache...
[ 3.523525] systemd[1]: Set Up Additional Binary Formats was skipped because no trigger condition checks were met.
[ 3.524311] systemd[1]: Finished Load/Save OS Random Seed.
[ 3.524984] systemd[1]: Update Boot Loader Random Seed was skipped because no trigger condition checks were met.
[ 3.535416] systemd[1]: Started RPC Bind.
[ 3.627715] systemd[1]: Finished Rebuild Dynamic Linker Cache.
[ 3.716368] usb 1-5.4: New USB device found, idVendor=03f0, idProduct=0941, bcdDevice= 1.00
[ 3.716372] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.716374] usb 1-5.4: Product: HP X500 USB Optical Mouse
[ 3.716375] usb 1-5.4: Manufacturer: PixArt
[ 3.731587] systemd[1]: Started Journal Service.
[ 3.776613] systemd-journald[293]: Received client request to flush runtime journal.
[ 3.819528] usbcore: registered new interface driver usbhid
[ 3.819533] usbhid: USB HID core driver
[ 3.826933] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5.3/1-5.3:1.0/0003:046D:C318.0001/input/input12
[ 3.880443] hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:02:00.0-5.3/input0
[ 3.880608] input: Logitech Logitech Illuminated Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5.3/1-5.3:1.1/0003:046D:C318.0002/input/input13
[ 3.937110] hid-generic 0003:046D:C318.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:02:00.0-5.3/input1
[ 3.937232] input: PixArt HP X500 USB Optical Mouse as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5.4/1-5.4:1.0/0003:03F0:0941.0003/input/input15
[ 3.937274] hid-generic 0003:03F0:0941.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP X500 USB Optical Mouse] on usb-0000:02:00.0-5.4/input0
[ 3.946619] mousedev: PS/2 mouse device common for all mice
[ 4.196965] Generic FE-GE Realtek PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC)
[ 4.387038] r8169 0000:06:00.0 enp6s0: Link is Down
[ 6.437571] igb 0000:08:00.0 enp8s0f0: igb: enp8s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 7.114399] r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-25 22:01 ` Christian Heusel
@ 2024-07-26 10:50 ` Thomas Gleixner
2024-07-26 10:57 ` Borislav Petkov
2024-07-26 21:18 ` Rob
0 siblings, 2 replies; 24+ messages in thread
From: Thomas Gleixner @ 2024-07-26 10:50 UTC (permalink / raw)
To: Christian Heusel, Borislav Petkov; +Cc: regressions, x86, rob, Joerg Roedel
On Fri, Jul 26 2024 at 00:01, Christian Heusel wrote:
> Sorry for causing some confusion on that part and I hope the above
> outputs help with debugging this issue!
Not really. The issue is completely unclear and nothing makes any sense
here.
The only difference is the resulting number of possible CPUs.
[ 0.026516] CPU topo: Allowing 4 present CPUs plus 12 hotplug CPUs
versus:
[ 0.025251] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
which really should not make any difference because the 1300X has only 4
CPUs.
So the bisected commit is the messenger for some other problem
presumably in the IOMMU area which is just papered over when there are
12 possible hotplug CPUs enumerated.
So in theory the same problem should happen with a pre 6.9 kernel and
'nr_cpus=4' on the kernel command line. Can you please verify?
Another data point to be evaluated is whether booting the unmodified
6.10+ kernel with 'nointremap' instead of 'iommu=off' on the command
line makes the machine boot as well.
Thanks,
tglx
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-26 10:50 ` Thomas Gleixner
@ 2024-07-26 10:57 ` Borislav Petkov
2024-07-26 21:18 ` Rob
1 sibling, 0 replies; 24+ messages in thread
From: Borislav Petkov @ 2024-07-26 10:57 UTC (permalink / raw)
To: Christian Heusel; +Cc: Thomas Gleixner, regressions, x86, rob, Joerg Roedel
On Fri, Jul 26, 2024 at 12:50:20PM +0200, Thomas Gleixner wrote:
...
> Another data point to be evaluated is whether booting the unmodified
> 6.10+ kernel with 'nointremap' instead of 'iommu=off' on the command
> line makes the machine boot as well.
... one other thing to try, if possible: can you connect that machine over
serial to another one and then catch dmesg with the failing kernel so that we
can see what the failure actually is?
Might give us a better idea.
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-26 10:50 ` Thomas Gleixner
2024-07-26 10:57 ` Borislav Petkov
@ 2024-07-26 21:18 ` Rob
2024-07-26 22:40 ` Rob
1 sibling, 1 reply; 24+ messages in thread
From: Rob @ 2024-07-26 21:18 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Christian Heusel, Borislav Petkov, regressions, x86, Joerg Roedel
>So in theory the same problem should happen with a pre 6.9 kernel and
>'nr_cpus=4' on the kernel command line. Can you please verify?
Confirmed, 6.6.40-2-lts with 'nr_cpus=4' hangs
>Another data point to be evaluated is whether booting the unmodified
>6.10+ kernel with 'nointremap' instead of 'iommu=off' on the command
>line makes the machine boot as well.
linux-mainline 6.10-1.1 with 'nointremap' boots
>... connect that machine over serial ...
Unfortunately I don't have the hardware for this
Kind regards,
Rob
* Thomas Gleixner (tglx@linutronix.de) wrote:
>On Fri, Jul 26 2024 at 00:01, Christian Heusel wrote:
>> Sorry for causing some confusion on that part and I hope the above
>> outputs help with debugging this issue!
>
>Not really. The issue is completely unclear and nothing makes any sense
>here.
>
>The only difference is the resulting number of possible CPUs.
>
>[ 0.026516] CPU topo: Allowing 4 present CPUs plus 12 hotplug CPUs
>
>versus:
>
>[ 0.025251] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
>
>which really should not make any difference because the 1300X has only 4
>CPUs.
>
>So the bisected commit is the messenger for some other problem
>presumably in the IOMMU area which is just papered over when there are
>12 possible hotplug CPUs enumerated.
>
>So in theory the same problem should happen with a pre 6.9 kernel and
>'nr_cpus=4' on the kernel command line. Can you please verify?
>
>Another data point to be evaluated is whether booting the unmodified
>6.10+ kernel with 'nointremap' instead of 'iommu=off' on the command
>line makes the machine boot as well.
>
>Thanks,
>
> tglx
--
Rob Newcater
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-26 21:18 ` Rob
@ 2024-07-26 22:40 ` Rob
2024-07-27 6:40 ` Borislav Petkov
2024-07-27 7:41 ` Thomas Gleixner
0 siblings, 2 replies; 24+ messages in thread
From: Rob @ 2024-07-26 22:40 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Christian Heusel, Borislav Petkov, regressions, x86, Joerg Roedel
* Rob (rob@durendal.co.uk) wrote:
>>So in theory the same problem should happen with a pre 6.9 kernel
>>and 'nr_cpus=4' on the kernel command line. Can you please verify?
>
>Confirmed, 6.6.40-2-lts with 'nr_cpus=4' hangs
>
>>Another data point to be evaluated is whether booting the unmodified
>>6.10+ kernel with 'nointremap' instead of 'iommu=off' on the command
>>line makes the machine boot as well.
>
>linux-mainline 6.10-1.1 with 'nointremap' boots
I have also tested on the non-patched mainline version 6.10 with
'nointremap' and it also boots
Kind regards,
Rob
>
>>... connect that machine over serial ...
>
>Unfortunately I don't have the hardware for this
>
>Kind regards,
>
>Rob
>
>
>* Thomas Gleixner (tglx@linutronix.de) wrote:
>>On Fri, Jul 26 2024 at 00:01, Christian Heusel wrote:
>>>Sorry for causing some confusion on that part and I hope the above
>>>outputs help with debugging this issue!
>>
>>Not really. The issue is completely unclear and nothing makes any sense
>>here.
>>
>>The only difference is the resulting number of possible CPUs.
>>
>>[ 0.026516] CPU topo: Allowing 4 present CPUs plus 12 hotplug CPUs
>>
>>versus:
>>
>>[ 0.025251] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
>>
>>which really should not make any difference because the 1300X has only 4
>>CPUs.
>>
>>So the bisected commit is the messenger for some other problem
>>presumably in the IOMMU area which is just papered over when there are
>>12 possible hotplug CPUs enumerated.
>>
>>So in theory the same problem should happen with a pre 6.9 kernel and
>>'nr_cpus=4' on the kernel command line. Can you please verify?
>>
>>Another data point to be evaluated is whether booting the unmodified
>>6.10+ kernel with 'nointremap' instead of 'iommu=off' on the command
>>line makes the machine boot as well.
>>
>>Thanks,
>>
>> tglx
>
>--
>Rob Newcater
--
Rob Newcater
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-26 22:40 ` Rob
@ 2024-07-27 6:40 ` Borislav Petkov
2024-07-27 7:41 ` Thomas Gleixner
1 sibling, 0 replies; 24+ messages in thread
From: Borislav Petkov @ 2024-07-27 6:40 UTC (permalink / raw)
To: Rob, Thomas Gleixner; +Cc: Christian Heusel, regressions, x86, Joerg Roedel
On July 27, 2024 12:40:47 AM GMT+02:00, Rob <rob@durendal.co.uk> wrote:
>* Rob (rob@durendal.co.uk) wrote:
>>> So in theory the same problem should happen with a pre 6.9 kernel and 'nr_cpus=4' on the kernel command line. Can you please verify?
>>
>> Confirmed, 6.6.40-2-lts with 'nr_cpus=4' hangs
>>
>>> Another data point to be evaluated is whether booting the unmodified 6.10+ kernel with 'nointremap' instead of 'iommu=off' on the command line makes the machine boot as well.
>>
>> linux-mainline 6.10-1.1 with 'nointremap' boots
>I have also tested on the non-patched mainline version 6.10 with 'nointremap' and it also boots
Are you running the latest BIOS on that machine? If not, update it pls.
--
Sent from a small device: formatting sucks and brevity is inevitable.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-26 22:40 ` Rob
2024-07-27 6:40 ` Borislav Petkov
@ 2024-07-27 7:41 ` Thomas Gleixner
2024-07-27 12:56 ` Rob
1 sibling, 1 reply; 24+ messages in thread
From: Thomas Gleixner @ 2024-07-27 7:41 UTC (permalink / raw)
To: Rob; +Cc: Christian Heusel, Borislav Petkov, regressions, x86, Joerg Roedel
On Fri, Jul 26 2024 at 23:40, rob@durendal.co.uk wrote:
> I have also tested on the non-patched mainline version 6.10 with
> 'nointremap' and it also boots
Thanks for confirming. I'm pretty sure by now that this is the same
problem as the one in this thread:
https://lore.kernel.org/r/87wmntkhak.ffs@tglx
That got resolved by a BIOS update, but for testing sake it would be
useful to give the patch in the link above a try on your machine.
Thanks,
tglx
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-27 7:41 ` Thomas Gleixner
@ 2024-07-27 12:56 ` Rob
2024-07-27 15:26 ` Thomas Gleixner
0 siblings, 1 reply; 24+ messages in thread
From: Rob @ 2024-07-27 12:56 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Christian Heusel, Borislav Petkov, regressions, x86, Joerg Roedel
* Thomas Gleixner (tglx@linutronix.de) wrote:
>On Fri, Jul 26 2024 at 23:40, rob@durendal.co.uk wrote:
>> I have also tested on the non-patched mainline version 6.10 with
>> 'nointremap' and it also boots
>
>Thanks for confirming. I'm pretty sure by now that this is the same
>problem as the one in this thread:
>
> https://lore.kernel.org/r/87wmntkhak.ffs@tglx
>
>That got resolved by a BIOS update, but for testing sake it would be
>useful to give the patch in the link above a try on your machine.
Yes this boots. I'll look into updating the BIOS.
Thanks,
Rob
>
>Thanks,
>
> tglx
--
Rob Newcater
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [REGRESSION][BISECTED] Early boot hangs since f0551af02130
2024-07-27 12:56 ` Rob
@ 2024-07-27 15:26 ` Thomas Gleixner
2024-07-28 11:06 ` [PATCH] x86/apic: Remove logical destination mode for 64-bit Thomas Gleixner
0 siblings, 1 reply; 24+ messages in thread
From: Thomas Gleixner @ 2024-07-27 15:26 UTC (permalink / raw)
To: Rob
Cc: Christian Heusel, Borislav Petkov, regressions, x86, Joerg Roedel,
Tony Luck
On Sat, Jul 27 2024 at 13:56, rob@durendal.co.uk wrote:
> * Thomas Gleixner (tglx@linutronix.de) wrote:
>>On Fri, Jul 26 2024 at 23:40, rob@durendal.co.uk wrote:
>>> I have also tested on the non-patched mainline version 6.10 with
>>> 'nointremap' and it also boots
>>
>>Thanks for confirming. I'm pretty sure by now that this is the same
>>problem as the one in this thread:
>>
>> https://lore.kernel.org/r/87wmntkhak.ffs@tglx
>>
>>That got resolved by a BIOS update, but for testing sake it would be
>>useful to give the patch in the link above a try on your machine.
>
> Yes this boots. I'll look into updating the BIOS.
Thanks for testing! It's definitely the same problem and it seems to be
affecting Zen1 CPUs with a stale BIOS/firmware version.
While updating the BIOS is a good idea in any case, I'm seriously
pondering to get rid of the logical destination mode on 64 bit
completely and just default to physical destination mode.
I'll send out a patch later.
Thanks,
tglx
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH] x86/apic: Remove logical destination mode for 64-bit
2024-07-27 15:26 ` Thomas Gleixner
@ 2024-07-28 11:06 ` Thomas Gleixner
2024-07-28 16:51 ` Rob
` (2 more replies)
0 siblings, 3 replies; 24+ messages in thread
From: Thomas Gleixner @ 2024-07-28 11:06 UTC (permalink / raw)
To: Rob
Cc: Christian Heusel, Borislav Petkov, regressions, x86, Joerg Roedel,
Tony Luck, LKML, Paul Menzel, Lyude Paul
Logical destination mode of the local APIC is used for systems with up to
8 CPUs. It has an advantage over physical destination mode as it allows to
target multiple CPUs at once with IPIs.
That advantage was definitely worth it when systems with up to 8 CPUs
were state of the art for servers and workstations, but that's history.
Aside of that there are systems which fail to work with logical destination
mode as the ACPI/DMI quirks show and there are AMD Zen1 systems out there
which fail when interrupt remapping is enabled. The latter can be cured by
firmware updates, but not all OEMs distribute the required changes.
Physical destination mode is guaranteed to work because it is the only way
to get a CPU up and running via the INIT/INIT/STARTUP sequence.
As the number of CPUs keeps increasing, logical destination mode becomes a
less used code path so there is no real good reason to keep it around.
Therefore remove logical destination mode support for 64-bit and default to
physical destination mode.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/apic.h | 8 --
arch/x86/kernel/apic/apic_flat_64.c | 119 ++----------------------------------
2 files changed, 7 insertions(+), 120 deletions(-)
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -345,20 +345,12 @@ extern struct apic *apic;
* APIC drivers are probed based on how they are listed in the .apicdrivers
* section. So the order is important and enforced by the ordering
* of different apic driver files in the Makefile.
- *
- * For the files having two apic drivers, we use apic_drivers()
- * to enforce the order with in them.
*/
#define apic_driver(sym) \
static const struct apic *__apicdrivers_##sym __used \
__aligned(sizeof(struct apic *)) \
__section(".apicdrivers") = { &sym }
-#define apic_drivers(sym1, sym2) \
- static struct apic *__apicdrivers_##sym1##sym2[2] __used \
- __aligned(sizeof(struct apic *)) \
- __section(".apicdrivers") = { &sym1, &sym2 }
-
extern struct apic *__apicdrivers[], *__apicdrivers_end[];
/*
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -8,129 +8,25 @@
* Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
* James Cleverdon.
*/
-#include <linux/cpumask.h>
#include <linux/export.h>
-#include <linux/acpi.h>
-#include <asm/jailhouse_para.h>
#include <asm/apic.h>
#include "local.h"
-static struct apic apic_physflat;
-static struct apic apic_flat;
-
-struct apic *apic __ro_after_init = &apic_flat;
-EXPORT_SYMBOL_GPL(apic);
-
-static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- return 1;
-}
-
-static void _flat_send_IPI_mask(unsigned long mask, int vector)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- __default_send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL);
- local_irq_restore(flags);
-}
-
-static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
-{
- unsigned long mask = cpumask_bits(cpumask)[0];
-
- _flat_send_IPI_mask(mask, vector);
-}
-
-static void
-flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
-{
- unsigned long mask = cpumask_bits(cpumask)[0];
- int cpu = smp_processor_id();
-
- if (cpu < BITS_PER_LONG)
- __clear_bit(cpu, &mask);
-
- _flat_send_IPI_mask(mask, vector);
-}
-
-static u32 flat_get_apic_id(u32 x)
+static u32 physflat_get_apic_id(u32 x)
{
return (x >> 24) & 0xFF;
}
-static int flat_probe(void)
+static int physflat_probe(void)
{
return 1;
}
-static struct apic apic_flat __ro_after_init = {
- .name = "flat",
- .probe = flat_probe,
- .acpi_madt_oem_check = flat_acpi_madt_oem_check,
-
- .dest_mode_logical = true,
-
- .disable_esr = 0,
-
- .init_apic_ldr = default_init_apic_ldr,
- .cpu_present_to_apicid = default_cpu_present_to_apicid,
-
- .max_apic_id = 0xFE,
- .get_apic_id = flat_get_apic_id,
-
- .calc_dest_apicid = apic_flat_calc_apicid,
-
- .send_IPI = default_send_IPI_single,
- .send_IPI_mask = flat_send_IPI_mask,
- .send_IPI_mask_allbutself = flat_send_IPI_mask_allbutself,
- .send_IPI_allbutself = default_send_IPI_allbutself,
- .send_IPI_all = default_send_IPI_all,
- .send_IPI_self = default_send_IPI_self,
- .nmi_to_offline_cpu = true,
-
- .read = native_apic_mem_read,
- .write = native_apic_mem_write,
- .eoi = native_apic_mem_eoi,
- .icr_read = native_apic_icr_read,
- .icr_write = native_apic_icr_write,
- .wait_icr_idle = apic_mem_wait_icr_idle,
- .safe_wait_icr_idle = apic_mem_wait_icr_idle_timeout,
-};
-
-/*
- * Physflat mode is used when there are more than 8 CPUs on a system.
- * We cannot use logical delivery in this case because the mask
- * overflows, so use physical mode.
- */
static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
-#ifdef CONFIG_ACPI
- /*
- * Quirk: some x86_64 machines can only use physical APIC mode
- * regardless of how many processors are present (x86_64 ES7000
- * is an example).
- */
- if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
- (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
- printk(KERN_DEBUG "system APIC only can use physical flat");
- return 1;
- }
-
- if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
- printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
- return 1;
- }
-#endif
-
- return 0;
-}
-
-static int physflat_probe(void)
-{
- return apic == &apic_physflat || num_possible_cpus() > 8 || jailhouse_paravirt();
+ return 1;
}
static struct apic apic_physflat __ro_after_init = {
@@ -146,7 +42,7 @@ static struct apic apic_physflat __ro_af
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.max_apic_id = 0xFE,
- .get_apic_id = flat_get_apic_id,
+ .get_apic_id = physflat_get_apic_id,
.calc_dest_apicid = apic_default_calc_apicid,
@@ -166,8 +62,7 @@ static struct apic apic_physflat __ro_af
.wait_icr_idle = apic_mem_wait_icr_idle,
.safe_wait_icr_idle = apic_mem_wait_icr_idle_timeout,
};
+apic_driver(apic_physflat);
-/*
- * We need to check for physflat first, so this order is important.
- */
-apic_drivers(apic_physflat, apic_flat);
+struct apic *apic __ro_after_init = &apic_physflat;
+EXPORT_SYMBOL_GPL(apic);
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH] x86/apic: Remove logical destination mode for 64-bit
2024-07-28 11:06 ` [PATCH] x86/apic: Remove logical destination mode for 64-bit Thomas Gleixner
@ 2024-07-28 16:51 ` Rob
2024-08-09 9:37 ` Christian Heusel
2024-07-29 7:36 ` Borislav Petkov
2024-08-09 12:45 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner
2 siblings, 1 reply; 24+ messages in thread
From: Rob @ 2024-07-28 16:51 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Christian Heusel, Borislav Petkov, regressions, x86, Joerg Roedel,
Tony Luck, LKML, Paul Menzel, Lyude Paul
* Thomas Gleixner (tglx@linutronix.de) wrote:
>Logical destination mode of the local APIC is used for systems with up to
>8 CPUs. It has an advantage over physical destination mode as it allows to
>target multiple CPUs at once with IPIs.
>
>That advantage was definitely worth it when systems with up to 8 CPUs
>were state of the art for servers and workstations, but that's history.
>
>Aside of that there are systems which fail to work with logical destination
>mode as the ACPI/DMI quirks show and there are AMD Zen1 systems out there
>which fail when interrupt remapping is enabled. The latter can be cured by
>firmware updates, but not all OEMs distribute the required changes.
>
>Physical destination mode is guaranteed to work because it is the only way
>to get a CPU up and running via the INIT/INIT/STARTUP sequence.
>
>As the number of CPUs keeps increasing, logical destination mode becomes a
>less used code path so there is no real good reason to keep it around.
>
>Therefore remove logical destination mode support for 64-bit and default to
>physical destination mode.
Thanks Chris for applying the patch for me.
Thomas - The patched kernel boots successfully. I held off updating the
BIOS so there can be no ambiguity.
Thanks,
Rob
>
>Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
>---
> arch/x86/include/asm/apic.h | 8 --
> arch/x86/kernel/apic/apic_flat_64.c | 119 ++----------------------------------
> 2 files changed, 7 insertions(+), 120 deletions(-)
>
>--- a/arch/x86/include/asm/apic.h
>+++ b/arch/x86/include/asm/apic.h
>@@ -345,20 +345,12 @@ extern struct apic *apic;
> * APIC drivers are probed based on how they are listed in the .apicdrivers
> * section. So the order is important and enforced by the ordering
> * of different apic driver files in the Makefile.
>- *
>- * For the files having two apic drivers, we use apic_drivers()
>- * to enforce the order with in them.
> */
> #define apic_driver(sym) \
> static const struct apic *__apicdrivers_##sym __used \
> __aligned(sizeof(struct apic *)) \
> __section(".apicdrivers") = { &sym }
>
>-#define apic_drivers(sym1, sym2) \
>- static struct apic *__apicdrivers_##sym1##sym2[2] __used \
>- __aligned(sizeof(struct apic *)) \
>- __section(".apicdrivers") = { &sym1, &sym2 }
>-
> extern struct apic *__apicdrivers[], *__apicdrivers_end[];
>
> /*
>--- a/arch/x86/kernel/apic/apic_flat_64.c
>+++ b/arch/x86/kernel/apic/apic_flat_64.c
>@@ -8,129 +8,25 @@
> * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
> * James Cleverdon.
> */
>-#include <linux/cpumask.h>
> #include <linux/export.h>
>-#include <linux/acpi.h>
>
>-#include <asm/jailhouse_para.h>
> #include <asm/apic.h>
>
> #include "local.h"
>
>-static struct apic apic_physflat;
>-static struct apic apic_flat;
>-
>-struct apic *apic __ro_after_init = &apic_flat;
>-EXPORT_SYMBOL_GPL(apic);
>-
>-static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
>-{
>- return 1;
>-}
>-
>-static void _flat_send_IPI_mask(unsigned long mask, int vector)
>-{
>- unsigned long flags;
>-
>- local_irq_save(flags);
>- __default_send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL);
>- local_irq_restore(flags);
>-}
>-
>-static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
>-{
>- unsigned long mask = cpumask_bits(cpumask)[0];
>-
>- _flat_send_IPI_mask(mask, vector);
>-}
>-
>-static void
>-flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
>-{
>- unsigned long mask = cpumask_bits(cpumask)[0];
>- int cpu = smp_processor_id();
>-
>- if (cpu < BITS_PER_LONG)
>- __clear_bit(cpu, &mask);
>-
>- _flat_send_IPI_mask(mask, vector);
>-}
>-
>-static u32 flat_get_apic_id(u32 x)
>+static u32 physflat_get_apic_id(u32 x)
> {
> return (x >> 24) & 0xFF;
> }
>
>-static int flat_probe(void)
>+static int physflat_probe(void)
> {
> return 1;
> }
>
>-static struct apic apic_flat __ro_after_init = {
>- .name = "flat",
>- .probe = flat_probe,
>- .acpi_madt_oem_check = flat_acpi_madt_oem_check,
>-
>- .dest_mode_logical = true,
>-
>- .disable_esr = 0,
>-
>- .init_apic_ldr = default_init_apic_ldr,
>- .cpu_present_to_apicid = default_cpu_present_to_apicid,
>-
>- .max_apic_id = 0xFE,
>- .get_apic_id = flat_get_apic_id,
>-
>- .calc_dest_apicid = apic_flat_calc_apicid,
>-
>- .send_IPI = default_send_IPI_single,
>- .send_IPI_mask = flat_send_IPI_mask,
>- .send_IPI_mask_allbutself = flat_send_IPI_mask_allbutself,
>- .send_IPI_allbutself = default_send_IPI_allbutself,
>- .send_IPI_all = default_send_IPI_all,
>- .send_IPI_self = default_send_IPI_self,
>- .nmi_to_offline_cpu = true,
>-
>- .read = native_apic_mem_read,
>- .write = native_apic_mem_write,
>- .eoi = native_apic_mem_eoi,
>- .icr_read = native_apic_icr_read,
>- .icr_write = native_apic_icr_write,
>- .wait_icr_idle = apic_mem_wait_icr_idle,
>- .safe_wait_icr_idle = apic_mem_wait_icr_idle_timeout,
>-};
>-
>-/*
>- * Physflat mode is used when there are more than 8 CPUs on a system.
>- * We cannot use logical delivery in this case because the mask
>- * overflows, so use physical mode.
>- */
> static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
> {
>-#ifdef CONFIG_ACPI
>- /*
>- * Quirk: some x86_64 machines can only use physical APIC mode
>- * regardless of how many processors are present (x86_64 ES7000
>- * is an example).
>- */
>- if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
>- (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
>- printk(KERN_DEBUG "system APIC only can use physical flat");
>- return 1;
>- }
>-
>- if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
>- printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
>- return 1;
>- }
>-#endif
>-
>- return 0;
>-}
>-
>-static int physflat_probe(void)
>-{
>- return apic == &apic_physflat || num_possible_cpus() > 8 || jailhouse_paravirt();
>+ return 1;
> }
>
> static struct apic apic_physflat __ro_after_init = {
>@@ -146,7 +42,7 @@ static struct apic apic_physflat __ro_af
> .cpu_present_to_apicid = default_cpu_present_to_apicid,
>
> .max_apic_id = 0xFE,
>- .get_apic_id = flat_get_apic_id,
>+ .get_apic_id = physflat_get_apic_id,
>
> .calc_dest_apicid = apic_default_calc_apicid,
>
>@@ -166,8 +62,7 @@ static struct apic apic_physflat __ro_af
> .wait_icr_idle = apic_mem_wait_icr_idle,
> .safe_wait_icr_idle = apic_mem_wait_icr_idle_timeout,
> };
>+apic_driver(apic_physflat);
>
>-/*
>- * We need to check for physflat first, so this order is important.
>- */
>-apic_drivers(apic_physflat, apic_flat);
>+struct apic *apic __ro_after_init = &apic_physflat;
>+EXPORT_SYMBOL_GPL(apic);
--
Rob Newcater
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH] x86/apic: Remove logical destination mode for 64-bit
2024-07-28 11:06 ` [PATCH] x86/apic: Remove logical destination mode for 64-bit Thomas Gleixner
2024-07-28 16:51 ` Rob
@ 2024-07-29 7:36 ` Borislav Petkov
2024-08-09 12:45 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner
2 siblings, 0 replies; 24+ messages in thread
From: Borislav Petkov @ 2024-07-29 7:36 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Rob, Christian Heusel, regressions, x86, Joerg Roedel, Tony Luck,
LKML, Paul Menzel, Lyude Paul
On Sun, Jul 28, 2024 at 01:06:10PM +0200, Thomas Gleixner wrote:
> Logical destination mode of the local APIC is used for systems with up to
> 8 CPUs. It has an advantage over physical destination mode as it allows to
> target multiple CPUs at once with IPIs.
>
> That advantage was definitely worth it when systems with up to 8 CPUs
> were state of the art for servers and workstations, but that's history.
>
> Aside of that there are systems which fail to work with logical destination
> mode as the ACPI/DMI quirks show and there are AMD Zen1 systems out there
> which fail when interrupt remapping is enabled. The latter can be cured by
> firmware updates, but not all OEMs distribute the required changes.
>
> Physical destination mode is guaranteed to work because it is the only way
> to get a CPU up and running via the INIT/INIT/STARTUP sequence.
>
> As the number of CPUs keeps increasing, logical destination mode becomes a
> less used code path so there is no real good reason to keep it around.
>
> Therefore remove logical destination mode support for 64-bit and default to
> physical destination mode.
>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> ---
> arch/x86/include/asm/apic.h | 8 --
> arch/x86/kernel/apic/apic_flat_64.c | 119 ++----------------------------------
> 2 files changed, 7 insertions(+), 120 deletions(-)
Boots on my Zen1 but then again, it never had those Zen1 client problems to
begin with...
Anyway
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH] x86/apic: Remove logical destination mode for 64-bit
2024-07-28 16:51 ` Rob
@ 2024-08-09 9:37 ` Christian Heusel
2024-08-09 12:18 ` Thomas Gleixner
0 siblings, 1 reply; 24+ messages in thread
From: Christian Heusel @ 2024-08-09 9:37 UTC (permalink / raw)
To: Rob
Cc: Thomas Gleixner, Borislav Petkov, regressions, x86, Joerg Roedel,
Tony Luck, LKML, Paul Menzel, Lyude Paul
[-- Attachment #1: Type: text/plain, Size: 1498 bytes --]
On 24/07/28 05:51PM, Rob wrote:
> * Thomas Gleixner (tglx@linutronix.de) wrote:
> > Logical destination mode of the local APIC is used for systems with up to
> > 8 CPUs. It has an advantage over physical destination mode as it allows to
> > target multiple CPUs at once with IPIs.
> >
> > That advantage was definitely worth it when systems with up to 8 CPUs
> > were state of the art for servers and workstations, but that's history.
> >
> > Aside of that there are systems which fail to work with logical destination
> > mode as the ACPI/DMI quirks show and there are AMD Zen1 systems out there
> > which fail when interrupt remapping is enabled. The latter can be cured by
> > firmware updates, but not all OEMs distribute the required changes.
> >
> > Physical destination mode is guaranteed to work because it is the only way
> > to get a CPU up and running via the INIT/INIT/STARTUP sequence.
> >
> > As the number of CPUs keeps increasing, logical destination mode becomes a
> > less used code path so there is no real good reason to keep it around.
> >
> > Therefore remove logical destination mode support for 64-bit and default to
> > physical destination mode.
>
> Thanks Chris for applying the patch for me.
>
> Thomas - The patched kernel boots successfully. I held off updating the
> BIOS so there can be no ambiguity.
>
> Thanks,
>
> Rob
As far as I can tell this patch did not get applied anywhere so far,
right? Or did I miss anything?
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH] x86/apic: Remove logical destination mode for 64-bit
2024-08-09 9:37 ` Christian Heusel
@ 2024-08-09 12:18 ` Thomas Gleixner
2024-09-05 13:28 ` Christian Heusel
0 siblings, 1 reply; 24+ messages in thread
From: Thomas Gleixner @ 2024-08-09 12:18 UTC (permalink / raw)
To: Christian Heusel, Rob
Cc: Borislav Petkov, regressions, x86, Joerg Roedel, Tony Luck, LKML,
Paul Menzel, Lyude Paul
On Fri, Aug 09 2024 at 11:37, Christian Heusel wrote:
> On 24/07/28 05:51PM, Rob wrote:
>> * Thomas Gleixner (tglx@linutronix.de) wrote:
>> > As the number of CPUs keeps increasing, logical destination mode becomes a
>> > less used code path so there is no real good reason to keep it around.
>> >
>> > Therefore remove logical destination mode support for 64-bit and default to
>> > physical destination mode.
>>
>> Thanks Chris for applying the patch for me.
>>
>> Thomas - The patched kernel boots successfully. I held off updating the
>> BIOS so there can be no ambiguity.
>>
>> Thanks,
>>
>> Rob
>
> As far as I can tell this patch did not get applied anywhere so far,
> right? Or did I miss anything?
I forgot about it. Let me find it again and stick it into the tip tree.
Thanks,
tglx
^ permalink raw reply [flat|nested] 24+ messages in thread
* [tip: x86/apic] x86/apic: Remove logical destination mode for 64-bit
2024-07-28 11:06 ` [PATCH] x86/apic: Remove logical destination mode for 64-bit Thomas Gleixner
2024-07-28 16:51 ` Rob
2024-07-29 7:36 ` Borislav Petkov
@ 2024-08-09 12:45 ` tip-bot2 for Thomas Gleixner
2 siblings, 0 replies; 24+ messages in thread
From: tip-bot2 for Thomas Gleixner @ 2024-08-09 12:45 UTC (permalink / raw)
To: linux-tip-commits
Cc: Rob Newcater, Christian Heusel, Thomas Gleixner,
Borislav Petkov (AMD), x86, linux-kernel
The following commit has been merged into the x86/apic branch of tip:
Commit-ID: 838ba7733e4e3a94a928e8d0a058de1811a58621
Gitweb: https://git.kernel.org/tip/838ba7733e4e3a94a928e8d0a058de1811a58621
Author: Thomas Gleixner <tglx@linutronix.de>
AuthorDate: Sun, 28 Jul 2024 13:06:10 +02:00
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Fri, 09 Aug 2024 14:34:16 +02:00
x86/apic: Remove logical destination mode for 64-bit
Logical destination mode of the local APIC is used for systems with up to
8 CPUs. It has an advantage over physical destination mode as it allows to
target multiple CPUs at once with IPIs.
That advantage was definitely worth it when systems with up to 8 CPUs
were state of the art for servers and workstations, but that's history.
Aside of that there are systems which fail to work with logical destination
mode as the ACPI/DMI quirks show and there are AMD Zen1 systems out there
which fail when interrupt remapping is enabled as reported by Rob and
Christian. The latter problem can be cured by firmware updates, but not all
OEMs distribute the required changes.
Physical destination mode is guaranteed to work because it is the only way
to get a CPU up and running via the INIT/INIT/STARTUP sequence.
As the number of CPUs keeps increasing, logical destination mode becomes a
less used code path so there is no real good reason to keep it around.
Therefore remove logical destination mode support for 64-bit and default to
physical destination mode.
Reported-by: Rob Newcater <rob@durendal.co.uk>
Reported-by: Christian Heusel <christian@heusel.eu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Rob Newcater <rob@durendal.co.uk>
Link: https://lore.kernel.org/all/877cd5u671.ffs@tglx
---
arch/x86/include/asm/apic.h | 8 +--
arch/x86/kernel/apic/apic_flat_64.c | 119 +--------------------------
2 files changed, 7 insertions(+), 120 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 9dd22ee..53f0844 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -350,20 +350,12 @@ extern struct apic *apic;
* APIC drivers are probed based on how they are listed in the .apicdrivers
* section. So the order is important and enforced by the ordering
* of different apic driver files in the Makefile.
- *
- * For the files having two apic drivers, we use apic_drivers()
- * to enforce the order with in them.
*/
#define apic_driver(sym) \
static const struct apic *__apicdrivers_##sym __used \
__aligned(sizeof(struct apic *)) \
__section(".apicdrivers") = { &sym }
-#define apic_drivers(sym1, sym2) \
- static struct apic *__apicdrivers_##sym1##sym2[2] __used \
- __aligned(sizeof(struct apic *)) \
- __section(".apicdrivers") = { &sym1, &sym2 }
-
extern struct apic *__apicdrivers[], *__apicdrivers_end[];
/*
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index f37ad33..e0308d8 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -8,129 +8,25 @@
* Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
* James Cleverdon.
*/
-#include <linux/cpumask.h>
#include <linux/export.h>
-#include <linux/acpi.h>
-#include <asm/jailhouse_para.h>
#include <asm/apic.h>
#include "local.h"
-static struct apic apic_physflat;
-static struct apic apic_flat;
-
-struct apic *apic __ro_after_init = &apic_flat;
-EXPORT_SYMBOL_GPL(apic);
-
-static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- return 1;
-}
-
-static void _flat_send_IPI_mask(unsigned long mask, int vector)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- __default_send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL);
- local_irq_restore(flags);
-}
-
-static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
-{
- unsigned long mask = cpumask_bits(cpumask)[0];
-
- _flat_send_IPI_mask(mask, vector);
-}
-
-static void
-flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
-{
- unsigned long mask = cpumask_bits(cpumask)[0];
- int cpu = smp_processor_id();
-
- if (cpu < BITS_PER_LONG)
- __clear_bit(cpu, &mask);
-
- _flat_send_IPI_mask(mask, vector);
-}
-
-static u32 flat_get_apic_id(u32 x)
+static u32 physflat_get_apic_id(u32 x)
{
return (x >> 24) & 0xFF;
}
-static int flat_probe(void)
+static int physflat_probe(void)
{
return 1;
}
-static struct apic apic_flat __ro_after_init = {
- .name = "flat",
- .probe = flat_probe,
- .acpi_madt_oem_check = flat_acpi_madt_oem_check,
-
- .dest_mode_logical = true,
-
- .disable_esr = 0,
-
- .init_apic_ldr = default_init_apic_ldr,
- .cpu_present_to_apicid = default_cpu_present_to_apicid,
-
- .max_apic_id = 0xFE,
- .get_apic_id = flat_get_apic_id,
-
- .calc_dest_apicid = apic_flat_calc_apicid,
-
- .send_IPI = default_send_IPI_single,
- .send_IPI_mask = flat_send_IPI_mask,
- .send_IPI_mask_allbutself = flat_send_IPI_mask_allbutself,
- .send_IPI_allbutself = default_send_IPI_allbutself,
- .send_IPI_all = default_send_IPI_all,
- .send_IPI_self = default_send_IPI_self,
- .nmi_to_offline_cpu = true,
-
- .read = native_apic_mem_read,
- .write = native_apic_mem_write,
- .eoi = native_apic_mem_eoi,
- .icr_read = native_apic_icr_read,
- .icr_write = native_apic_icr_write,
- .wait_icr_idle = apic_mem_wait_icr_idle,
- .safe_wait_icr_idle = apic_mem_wait_icr_idle_timeout,
-};
-
-/*
- * Physflat mode is used when there are more than 8 CPUs on a system.
- * We cannot use logical delivery in this case because the mask
- * overflows, so use physical mode.
- */
static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
-#ifdef CONFIG_ACPI
- /*
- * Quirk: some x86_64 machines can only use physical APIC mode
- * regardless of how many processors are present (x86_64 ES7000
- * is an example).
- */
- if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
- (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
- printk(KERN_DEBUG "system APIC only can use physical flat");
- return 1;
- }
-
- if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
- printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
- return 1;
- }
-#endif
-
- return 0;
-}
-
-static int physflat_probe(void)
-{
- return apic == &apic_physflat || num_possible_cpus() > 8 || jailhouse_paravirt();
+ return 1;
}
static struct apic apic_physflat __ro_after_init = {
@@ -146,7 +42,7 @@ static struct apic apic_physflat __ro_after_init = {
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.max_apic_id = 0xFE,
- .get_apic_id = flat_get_apic_id,
+ .get_apic_id = physflat_get_apic_id,
.calc_dest_apicid = apic_default_calc_apicid,
@@ -166,8 +62,7 @@ static struct apic apic_physflat __ro_after_init = {
.wait_icr_idle = apic_mem_wait_icr_idle,
.safe_wait_icr_idle = apic_mem_wait_icr_idle_timeout,
};
+apic_driver(apic_physflat);
-/*
- * We need to check for physflat first, so this order is important.
- */
-apic_drivers(apic_physflat, apic_flat);
+struct apic *apic __ro_after_init = &apic_physflat;
+EXPORT_SYMBOL_GPL(apic);
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH] x86/apic: Remove logical destination mode for 64-bit
2024-08-09 12:18 ` Thomas Gleixner
@ 2024-09-05 13:28 ` Christian Heusel
2024-09-05 14:04 ` Borislav Petkov
0 siblings, 1 reply; 24+ messages in thread
From: Christian Heusel @ 2024-09-05 13:28 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Rob, Borislav Petkov, regressions, x86, Joerg Roedel, Tony Luck,
LKML, Paul Menzel, Lyude Paul
[-- Attachment #1: Type: text/plain, Size: 1199 bytes --]
On 24/08/09 02:18PM, Thomas Gleixner wrote:
> On Fri, Aug 09 2024 at 11:37, Christian Heusel wrote:
> > On 24/07/28 05:51PM, Rob wrote:
> >> * Thomas Gleixner (tglx@linutronix.de) wrote:
> >> > As the number of CPUs keeps increasing, logical destination mode becomes a
> >> > less used code path so there is no real good reason to keep it around.
> >> >
> >> > Therefore remove logical destination mode support for 64-bit and default to
> >> > physical destination mode.
> >>
> >> Thanks Chris for applying the patch for me.
> >>
> >> Thomas - The patched kernel boots successfully. I held off updating the
> >> BIOS so there can be no ambiguity.
> >>
> >> Thanks,
> >>
> >> Rob
> >
> > As far as I can tell this patch did not get applied anywhere so far,
> > right? Or did I miss anything?
>
> I forgot about it. Let me find it again and stick it into the tip tree.
I think the patch did not make it past the tip tree after that if I
checked correctly.
Now since it's summer people are maybe on vacation and I hope it got
stuck there because of cocktails on the beach and so on 😆🍹
In any case I wanted to send a reminder about it ..
Cheers,
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH] x86/apic: Remove logical destination mode for 64-bit
2024-09-05 13:28 ` Christian Heusel
@ 2024-09-05 14:04 ` Borislav Petkov
2024-09-06 8:34 ` Linux regression tracking (Thorsten Leemhuis)
0 siblings, 1 reply; 24+ messages in thread
From: Borislav Petkov @ 2024-09-05 14:04 UTC (permalink / raw)
To: Christian Heusel
Cc: Thomas Gleixner, Rob, regressions, x86, Joerg Roedel, Tony Luck,
LKML, Paul Menzel, Lyude Paul
On Thu, Sep 05, 2024 at 03:28:47PM +0200, Christian Heusel wrote:
> Now since it's summer people are maybe on vacation and I hope it got
> stuck there because of cocktails on the beach and so on 😆🍹
Yep, check. :)
The patch is on its way to 6.12:
https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?h=x86/apic&id=838ba7733e4e3a94a928e8d0a058de1811a58621
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH] x86/apic: Remove logical destination mode for 64-bit
2024-09-05 14:04 ` Borislav Petkov
@ 2024-09-06 8:34 ` Linux regression tracking (Thorsten Leemhuis)
2024-09-06 13:59 ` Thomas Gleixner
0 siblings, 1 reply; 24+ messages in thread
From: Linux regression tracking (Thorsten Leemhuis) @ 2024-09-06 8:34 UTC (permalink / raw)
To: Borislav Petkov, Christian Heusel
Cc: Thomas Gleixner, Rob, regressions, x86, Joerg Roedel, Tony Luck,
LKML, Paul Menzel, Lyude Paul
On 05.09.24 16:04, Borislav Petkov wrote:
> On Thu, Sep 05, 2024 at 03:28:47PM +0200, Christian Heusel wrote:
>> Now since it's summer people are maybe on vacation and I hope it got
>> stuck there because of cocktails on the beach and so on 😆🍹
>
> Yep, check. :)
> The patch is on its way to 6.12:
> https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?h=x86/apic&id=838ba7733e4e3a94a928e8d0a058de1811a58621
Hmmm. Please help me out here: why was that fix queued for -next and not
for this cycle?
Was that patch when it was committed considered too dangerous for
mainlining this cycle (at this point of the cycle I guess it might)? I
mean, it's afaics (not totally sure here, the change is missing a Fixes:
tag as well as Closes: tags pointing to the report) fixing a regression
with f0551af02130 that Christian reported (see start of this thread, e.g.,
https://lore.kernel.org/all/12df8b45-6100-4c8b-b82a-a6a75bed2e05@heusel.eu/
). And f0551af02130 is from v6.9-rc1, so given what Linus wrote in
https://lore.kernel.org/all/CAHk-=wis_qQy4oDNynNKi5b7Qhosmxtoj1jxo5wmB6SRUwQUBQ@mail.gmail.com/
that fix should likely have been (or still should be?) merged in this
cycle, unless it's really dangerous.
Or did I misunderstood something here?
Ciao, Thorsten
P.S.: While at it:
#regzbot fix: x86/apic: Remove logical destination mode for 64-bit
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH] x86/apic: Remove logical destination mode for 64-bit
2024-09-06 8:34 ` Linux regression tracking (Thorsten Leemhuis)
@ 2024-09-06 13:59 ` Thomas Gleixner
0 siblings, 0 replies; 24+ messages in thread
From: Thomas Gleixner @ 2024-09-06 13:59 UTC (permalink / raw)
To: Linux regression tracking (Thorsten Leemhuis), Borislav Petkov,
Christian Heusel
Cc: Rob, regressions, x86, Joerg Roedel, Tony Luck, LKML, Paul Menzel,
Lyude Paul
On Fri, Sep 06 2024 at 10:34, Linux regression tracking wrote:
> On 05.09.24 16:04, Borislav Petkov wrote:
>> https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?h=x86/apic&id=838ba7733e4e3a94a928e8d0a058de1811a58621
>
> Hmmm. Please help me out here: why was that fix queued for -next and not
> for this cycle?
>
> Was that patch when it was committed considered too dangerous for
> mainlining this cycle (at this point of the cycle I guess it might)?
Yes.
> I mean, it's afaics (not totally sure here, the change is missing a Fixes:
> tag as well as Closes: tags pointing to the report) fixing a regression
> with f0551af02130 that Christian reported (see start of this thread, e.g.,
> https://lore.kernel.org/all/12df8b45-6100-4c8b-b82a-a6a75bed2e05@heusel.eu/
> ). And f0551af02130 is from v6.9-rc1, so given what Linus wrote in
> https://lore.kernel.org/all/CAHk-=wis_qQy4oDNynNKi5b7Qhosmxtoj1jxo5wmB6SRUwQUBQ@mail.gmail.com/
> that fix should likely have been (or still should be?) merged in this
> cycle, unless it's really dangerous.
>
> Or did I misunderstood something here?
I really wanted to cook it first. Aside of that f0551af02130 unearthed a
firmware bug as the reporters confirmed. So I didn't see an immediate
reason to send it to Linus.
My rationale for writing the patch was to avoid this issue in the future
for those who can't update firmware and have it in the next LTS release,
which is what distros will ship in their stable offerings.
Thanks,
tglx
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2024-09-06 13:59 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-07-15 13:11 [REGRESSION][BISECTED] Early boot hangs since f0551af02130 Christian Heusel
2024-07-23 11:42 ` Christian Heusel
2024-07-23 12:02 ` Borislav Petkov
2024-07-23 22:08 ` Christian Heusel
2024-07-25 10:50 ` Borislav Petkov
2024-07-25 22:01 ` Christian Heusel
2024-07-26 10:50 ` Thomas Gleixner
2024-07-26 10:57 ` Borislav Petkov
2024-07-26 21:18 ` Rob
2024-07-26 22:40 ` Rob
2024-07-27 6:40 ` Borislav Petkov
2024-07-27 7:41 ` Thomas Gleixner
2024-07-27 12:56 ` Rob
2024-07-27 15:26 ` Thomas Gleixner
2024-07-28 11:06 ` [PATCH] x86/apic: Remove logical destination mode for 64-bit Thomas Gleixner
2024-07-28 16:51 ` Rob
2024-08-09 9:37 ` Christian Heusel
2024-08-09 12:18 ` Thomas Gleixner
2024-09-05 13:28 ` Christian Heusel
2024-09-05 14:04 ` Borislav Petkov
2024-09-06 8:34 ` Linux regression tracking (Thorsten Leemhuis)
2024-09-06 13:59 ` Thomas Gleixner
2024-07-29 7:36 ` Borislav Petkov
2024-08-09 12:45 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.