From: Anton Bondarenko <anton_bondarenko-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
To: <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
<jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>,
<muzaffar_mahmood-aV4p89LCB337vf0t80Q1PNBPR1lH4CV8@public.gmane.org>,
<vladimir_zapolskiy-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>,
<b38343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Subject: [PATCH v2 0/8] Improvements for SPI IMX driver for Freescale IMX53 and IMX6 families
Date: Fri, 25 Sep 2015 19:57:07 +0200 [thread overview]
Message-ID: <cover.1442923630.git.anton_bondarenko@mentor.com> (raw)
A number of patches to impove or add the implementation
for the spi-imx driver related to Freescale IMX53 and IMX6.
It would also possible some of patches can be applied for other
Freescale controllers using spi-imx driver but could not be tested
due to lack of hardware.
Anton Bondarenko (8):
spi: imx: Fix DMA transfer
spi: imx: replace fixed timeout with calculated one
spi: imx: add support for all SPI word width for DMA transfer
spi: imx: add selection for iMX53 and iMX6 controller type
spi: imx: Add support for loopback for ECSPI controllers
spi: imx: return error from dma channel request
spi: imx: defer spi initialization, if DMA engine is pending
spi: imx: Add support for SPI Slave mode for imx53 and imx6 chips
.../devicetree/bindings/spi/fsl-imx-cspi.txt | 3 +
drivers/spi/spi-imx.c | 486 ++++++++++++++++-----
2 files changed, 388 insertions(+), 101 deletions(-)
--
2.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: anton_bondarenko@mentor.com (Anton Bondarenko)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/8] Improvements for SPI IMX driver for Freescale IMX53 and IMX6 families
Date: Fri, 25 Sep 2015 19:57:07 +0200 [thread overview]
Message-ID: <cover.1442923630.git.anton_bondarenko@mentor.com> (raw)
A number of patches to impove or add the implementation
for the spi-imx driver related to Freescale IMX53 and IMX6.
It would also possible some of patches can be applied for other
Freescale controllers using spi-imx driver but could not be tested
due to lack of hardware.
Anton Bondarenko (8):
spi: imx: Fix DMA transfer
spi: imx: replace fixed timeout with calculated one
spi: imx: add support for all SPI word width for DMA transfer
spi: imx: add selection for iMX53 and iMX6 controller type
spi: imx: Add support for loopback for ECSPI controllers
spi: imx: return error from dma channel request
spi: imx: defer spi initialization, if DMA engine is pending
spi: imx: Add support for SPI Slave mode for imx53 and imx6 chips
.../devicetree/bindings/spi/fsl-imx-cspi.txt | 3 +
drivers/spi/spi-imx.c | 486 ++++++++++++++++-----
2 files changed, 388 insertions(+), 101 deletions(-)
--
2.5.2
next reply other threads:[~2015-09-25 17:57 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-25 17:57 Anton Bondarenko [this message]
2015-09-25 17:57 ` [PATCH v2 0/8] Improvements for SPI IMX driver for Freescale IMX53 and IMX6 families Anton Bondarenko
2015-09-25 17:57 ` [PATCH v2 1/8] spi: imx: Fix DMA transfer Anton Bondarenko
2015-09-25 17:57 ` Anton Bondarenko
2015-09-28 3:48 ` kbuild test robot
2015-09-28 3:48 ` kbuild test robot
[not found] ` <d61ed8cc9e13b0890e6243135c613edea1234698.1442923630.git.anton_bondarenko-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2015-09-30 8:23 ` Robin Gong
2015-09-30 8:23 ` Robin Gong
2015-10-01 0:02 ` Bondarenko, Anton
2015-10-01 0:02 ` Bondarenko, Anton
2015-10-08 9:19 ` Robin Gong
2015-10-08 9:19 ` Robin Gong
2015-10-20 23:03 ` Anton Bondarenko
2015-10-20 23:03 ` Anton Bondarenko
2015-09-25 17:57 ` [PATCH v2 2/8] spi: imx: replace fixed timeout with calculated one Anton Bondarenko
2015-09-25 17:57 ` Anton Bondarenko
2015-09-30 8:31 ` Robin Gong
2015-09-30 8:31 ` Robin Gong
2015-10-01 0:08 ` Bondarenko, Anton
2015-10-01 0:08 ` Bondarenko, Anton
2015-09-25 17:57 ` [PATCH v2 3/8] spi: imx: add support for all SPI word width for DMA transfer Anton Bondarenko
2015-09-25 17:57 ` Anton Bondarenko
2015-09-30 8:35 ` Robin Gong
2015-09-30 8:35 ` Robin Gong
2015-10-01 0:34 ` Bondarenko, Anton
2015-10-01 0:34 ` Bondarenko, Anton
2015-10-08 9:51 ` Robin Gong
2015-10-08 9:51 ` Robin Gong
2015-10-20 23:28 ` Anton Bondarenko
2015-10-20 23:28 ` Anton Bondarenko
2015-09-25 17:57 ` [PATCH v2 4/8] spi: imx: add selection for iMX53 and iMX6 controller type Anton Bondarenko
2015-09-25 17:57 ` Anton Bondarenko
2015-09-25 17:57 ` [PATCH v2 5/8] spi: imx: Add support for loopback for ECSPI controllers Anton Bondarenko
2015-09-25 17:57 ` Anton Bondarenko
2015-09-30 8:42 ` Robin Gong
2015-09-30 8:42 ` Robin Gong
2015-10-01 0:16 ` Bondarenko, Anton
2015-10-01 0:16 ` Bondarenko, Anton
[not found] ` <04376A3D786BD947B28569C998A374A62E280E0F-0dz9ie/QGrkPOGHby5MvPNQH9K4/4qFeAL8bYrjMMd8@public.gmane.org>
2015-10-08 9:28 ` Robin Gong
2015-10-08 9:28 ` Robin Gong
2015-10-20 23:08 ` Anton Bondarenko
2015-10-20 23:08 ` Anton Bondarenko
2015-09-25 17:57 ` [PATCH v2 6/8] spi: imx: return error from dma channel request Anton Bondarenko
2015-09-25 17:57 ` Anton Bondarenko
2015-09-30 8:51 ` Robin Gong
2015-09-30 8:51 ` Robin Gong
2015-09-25 17:57 ` [PATCH v2 7/8] spi: imx: defer spi initialization, if DMA engine is pending Anton Bondarenko
2015-09-25 17:57 ` Anton Bondarenko
2015-09-30 8:54 ` Robin Gong
2015-09-30 8:54 ` Robin Gong
[not found] ` <cover.1442923630.git.anton_bondarenko-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2015-09-25 17:57 ` [PATCH v2 8/8] spi: imx: Add support for SPI Slave mode for imx53 and imx6 chips Anton Bondarenko
2015-09-25 17:57 ` Anton Bondarenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1442923630.git.anton_bondarenko@mentor.com \
--to=anton_bondarenko-nmggyn9qbj3qt0dzr+alfa@public.gmane.org \
--cc=b38343-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=jiada_wang-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=muzaffar_mahmood-aV4p89LCB337vf0t80Q1PNBPR1lH4CV8@public.gmane.org \
--cc=vladimir_zapolskiy-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.