From: Colin Guthrie <gmane@colin.guthr.ie>
To: alsa-devel@alsa-project.org
Subject: Re: alsactl adds volume controls?
Date: Thu, 07 Oct 2010 00:29:59 +0100 [thread overview]
Message-ID: <i8j0pn$308$1@dough.gmane.org> (raw)
In-Reply-To: <AANLkTi=9yMV8FrQJpZdEjW2tv4+xdujJaRBzRG7Zp+T9@mail.gmail.com>
'Twas brillig, and Raymond Yau at 06/10/10 01:05 did gyre and gimble:
> 2010/10/4 Colin Guthrie <gmane@colin.guthr.ie>
>> Just for clarity, the 0 -> -51dB range is for the PCM control (i.e.
>> softvol) only. The Master control gives me -46.5dB in addtiion to that
>> giving a total of -97.5dB. This still isn't as high as the -120dB you
>> are mentioning, but it's a lot closer.
>>
>> Of course I am lucky in that my Master apparently works fine but for
>> those souls without any Master control, I presume the full range should
>> be offered by the PCM softvol?
>>
>> Col
>>
>>
> Did it happen on both channels or only left channel ?
>
> The workaround mentioned in errata is to lock the sample rate
Did what happen? I was talking about dB ranges, not an event.
Col
--
Colin Guthrie
gmane(at)colin.guthr.ie
http://colin.guthr.ie/
Day Job:
Tribalogic Limited [http://www.tribalogic.net/]
Open Source:
Mageia Contributor [http://www.mageia.org/]
PulseAudio Hacker [http://www.pulseaudio.org/]
Trac Hacker [http://trac.edgewall.org/]
next prev parent reply other threads:[~2010-10-06 23:30 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-27 14:39 alsactl adds volume controls? David Henningsson
2010-08-27 15:43 ` Clemens Ladisch
2010-08-27 18:36 ` David Henningsson
2010-08-27 22:58 ` Raymond Yau
2010-08-30 8:01 ` Takashi Iwai
2010-08-30 9:30 ` Raymond Yau
2010-08-30 11:09 ` Takashi Iwai
2010-08-30 13:01 ` David Henningsson
2010-08-30 13:08 ` Takashi Iwai
2010-09-01 13:26 ` David Henningsson
2010-09-01 14:06 ` Raymond Yau
2010-09-02 8:06 ` Takashi Iwai
2010-09-02 9:24 ` David Henningsson
2010-09-02 9:44 ` Takashi Iwai
2010-09-03 7:03 ` David Henningsson
2010-09-03 7:07 ` Jaroslav Kysela
2010-10-02 0:51 ` Raymond Yau
2010-09-03 7:23 ` Raymond Yau
2010-09-02 14:10 ` Jaroslav Kysela
2010-09-02 14:21 ` Clemens Ladisch
2010-09-02 15:24 ` Jaroslav Kysela
2010-09-02 15:52 ` Clemens Ladisch
2010-09-02 17:28 ` Jaroslav Kysela
2010-09-02 20:28 ` Sebastian H.
2010-09-29 14:26 ` Colin Guthrie
2010-09-29 18:09 ` Mark Brown
2010-09-30 9:17 ` Raymond Yau
2010-09-30 11:03 ` Clemens Ladisch
2010-09-30 15:09 ` Colin Guthrie
2010-09-30 15:56 ` Clemens Ladisch
2010-09-30 16:47 ` Mark Brown
2010-09-30 18:09 ` Takashi Iwai
2010-09-30 18:20 ` Colin Guthrie
2010-09-30 20:36 ` Mark Brown
2010-10-01 6:44 ` Clemens Ladisch
2010-10-01 8:19 ` Colin Guthrie
2010-10-01 9:02 ` Clemens Ladisch
2010-10-04 11:35 ` Colin Guthrie
2010-10-04 12:26 ` Clemens Ladisch
2010-10-04 14:01 ` Takashi Iwai
2010-10-07 8:05 ` Clemens Ladisch
2010-10-08 13:21 ` Colin Guthrie
2010-10-08 13:41 ` Clemens Ladisch
2010-10-08 14:05 ` Colin Guthrie
2010-10-08 14:16 ` Colin Guthrie
2010-10-08 14:42 ` Clemens Ladisch
2010-10-08 15:25 ` Colin Guthrie
2010-10-08 15:29 ` Colin Guthrie
2010-10-08 15:49 ` Colin Guthrie
2010-10-12 8:51 ` Colin Guthrie
2010-10-15 8:32 ` Clemens Ladisch
2010-10-15 8:32 ` [PATCH 1/2] ALSA: HDA: Sigmatel: work around incorrect master muting Clemens Ladisch
2010-10-15 8:33 ` [PATCH 2/2] tlv: fix returned dB information for min-is-mute controls Clemens Ladisch
2010-10-15 8:39 ` alsactl adds volume controls? Colin Guthrie
2010-10-16 15:49 ` Colin Guthrie
2010-10-17 8:50 ` Takashi Iwai
2010-10-17 11:22 ` Colin Guthrie
2010-10-08 15:49 ` Clemens Ladisch
2010-10-11 1:34 ` Raymond Yau
2010-10-11 8:25 ` Colin Guthrie
2010-10-12 8:37 ` Raymond Yau
2010-10-17 3:39 ` Raymond Yau
2010-10-17 11:18 ` Colin Guthrie
2010-10-04 14:18 ` Alexander E. Patrakov
2010-10-04 11:09 ` Raymond Yau
2010-10-04 11:38 ` Colin Guthrie
2010-10-06 0:05 ` Raymond Yau
2010-10-06 23:29 ` Colin Guthrie [this message]
2010-10-01 5:38 ` Raymond Yau
2010-10-03 7:37 ` Raymond Yau
2010-10-23 11:51 ` Raymond Yau
2010-10-23 13:00 ` Colin Guthrie
2010-10-24 11:49 ` Raymond Yau
2010-08-29 1:35 ` Raymond Yau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='i8j0pn$308$1@dough.gmane.org' \
--to=gmane@colin.guthr.ie \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.