From: "yangrunhua" <yangrunhua@njupt.edu.cn>
To: lartc@vger.kernel.org
Subject: RE: [LARTC] HTB problem
Date: Tue, 11 Dec 2001 09:34:22 +0000 [thread overview]
Message-ID: <marc-lartc-100806314319331@msgid-missing> (raw)
In-Reply-To: <marc-lartc-100803866815679@msgid-missing>
tc qdisc add dev eth0 root handle 1: htb default 2
tc class add dev eth0 parent 1: classid 1:1 htb rate 5kbps ceil 5kbps
burst 2k tc class add dev eth0 parent 1: classid 1:2 htb rate 10mbps
ceil 10mbps burst 2k
tc filter add dev eth0 protocol ip fw
and use iptables to mark every packet 0x10001,but up to 200KB/s. # tc
-s -d qdisc qdisc htb 1: dev eth0 r2q 10 default 2 dcache 0
deq_util 1/1000000 deq_rate 10 trials_per_deq 0 dcache_hits 0
Sent 1213554 bytes 13996 pkts (dropped 0, overlimits 3924)
# tc -s -d class show dev eth0
class htb 1:1 root prio 0 rate 40Kbit ceil 40Kbit burst 2Kb/8 mpu 0b
cburst 2Kb
Sent 209473 bytes 3364 pkts (dropped 0, overlimits 3367)
rate 73bps 1pps
lended: 3364 borrowed: 0 giants: 0 injects: 0
tokens: 316161 ctokens: 316161
class htb 1:2 root prio 0 rate 80Mbit ceil 80Mbit burst 2Kb/8 mpu 0b
cburst 2Kb Sent 1011846 bytes 10712 pkts (dropped 0, overlimits 151)
rate 258bps 1pps
lended: 10712 borrowed: 0 giants: 0 injects: 0
tokens: 155 ctokens: 155
why?
PII400 + 64M + 2.4.16
-----Original Message-----
From: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl]
On Behalf Of bert hubert
Sent: 2001Äê12ÔÂ11ÈÕ 17:21
To: lartc@mailman.ds9a.nl
Subject: Re: [LARTC] HTB problem
On Tue, Dec 11, 2001 at 10:46:08AM +0800, yangrunhua wrote:
> tc class add dev eth1 parent 1: classid 1:1 htb rate 10kbps ceil
10kbps
> burst 2k
> why the client run into 1:1 can keep 430 KB/s ?
Show your entire configuration, please.
Regards,
bert hubert
--
http://www.PowerDNS.com Versatile DNS Software & Services
Trilab The Technology People
Netherlabs BV / Rent-a-Nerd.nl - Nerd Available -
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/lartc/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
next prev parent reply other threads:[~2001-12-11 9:34 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-11 2:46 [LARTC] HTB problem yangrunhua
2001-12-11 9:21 ` bert hubert
2001-12-11 9:34 ` yangrunhua [this message]
2001-12-11 9:35 ` yangrunhua
2001-12-11 11:10 ` bert hubert
2001-12-12 5:47 ` yangrunhua
2001-12-12 10:02 ` yangrunhua
2001-12-12 11:40 ` Martin Devera
2001-12-12 13:50 ` bert hubert
2001-12-12 23:48 ` yangrunhua
2001-12-13 10:07 ` bert hubert
2002-06-26 0:22 ` [LARTC] htb problem Omar Armas
2002-06-26 0:32 ` Tomasz Wrona
2002-12-09 18:19 ` [LARTC] HTB Problem lartc
2002-12-09 18:57 ` Stef Coene
2003-01-23 22:47 ` [LARTC] HTB problem Jay Wineinger
2003-01-24 2:15 ` mingching.tiew
2003-01-24 2:39 ` Jay Wineinger
2003-06-12 19:21 ` [LARTC] htb problem Ratel
2003-06-12 19:23 ` Esteban
2003-06-12 19:35 ` Stef Coene
2003-06-12 20:04 ` Morten Isaksen
2003-06-12 20:51 ` Stef Coene
2003-06-12 20:54 ` Stef Coene
2003-06-12 21:15 ` Stef Coene
2003-06-14 21:46 ` terahz
2003-06-15 18:14 ` Stef Coene
2003-06-25 11:14 ` Ratel
2003-07-24 14:26 ` Delcho
2003-07-28 17:49 ` Stef Coene
2003-09-30 13:44 ` [LARTC] HTB Problem Guilherme Benkenstein
2003-09-30 19:59 ` Stef Coene
2003-12-02 23:08 ` [LARTC] HTB problem Mihai Tanasescu
2003-12-04 5:16 ` Mihai Tanasescu
2003-12-04 7:40 ` Catalin BOIE
-- strict thread matches above, loose matches on Subject: below --
2004-09-06 21:56 Cow
2004-09-07 11:08 ` zytek
2004-09-07 20:28 ` Cow
2004-09-07 21:16 ` [LARTC] HTB Problem Cow
2004-09-07 21:18 ` [LARTC] HTB problem Cow
2004-09-07 21:53 ` Andreas Klauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-100806314319331@msgid-missing \
--to=yangrunhua@njupt.edu.cn \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.