From: "yangrunhua" <yangrunhua@njupt.edu.cn>
To: lartc@vger.kernel.org
Subject: RE: [LARTC] HTB problem
Date: Wed, 12 Dec 2001 05:47:29 +0000 [thread overview]
Message-ID: <marc-lartc-100813599020773@msgid-missing> (raw)
In-Reply-To: <marc-lartc-100803866815679@msgid-missing>
Now, I know the where the problem is.
If I already use SNAT, how could I limit the inbound bandwidth of
Every intra-network ip protected by SNAT( with the help of iptables
nfmark)?
But mangle at PREROUTING goes before NAT translate.
Is there any method?
Thanks.
-----Original Message-----
From: bert hubert [mailto:ahu@ds9a.nl]
Sent: 2001Äê12ÔÂ11ÈÕ 19:10
To: yangrunhua
Cc: lartc@mailman.ds9a.nl
Subject: Re: [LARTC] HTB problem
On Tue, Dec 11, 2001 at 05:34:22PM +0800, yangrunhua wrote:
> tc qdisc add dev eth0 root handle 1: htb default 2
> tc class add dev eth0 parent 1: classid 1:1 htb rate 5kbps ceil 5kbps
> burst 2k tc class add dev eth0 parent 1: classid 1:2 htb rate 10mbps
> ceil 10mbps burst 2k
> tc filter add dev eth0 protocol ip fw
I still have a very hard time figuring out your configuration. Please
list
the following:
* your iptables commands
* your tc qdisc add commands
* your tc class add commands
* what kind of traffic you are generating
Thanks.
--
http://www.PowerDNS.com Versatile DNS Software & Services
Trilab The Technology People
Netherlabs BV / Rent-a-Nerd.nl - Nerd Available -
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
next prev parent reply other threads:[~2001-12-12 5:47 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-11 2:46 [LARTC] HTB problem yangrunhua
2001-12-11 9:21 ` bert hubert
2001-12-11 9:34 ` yangrunhua
2001-12-11 9:35 ` yangrunhua
2001-12-11 11:10 ` bert hubert
2001-12-12 5:47 ` yangrunhua [this message]
2001-12-12 10:02 ` yangrunhua
2001-12-12 11:40 ` Martin Devera
2001-12-12 13:50 ` bert hubert
2001-12-12 23:48 ` yangrunhua
2001-12-13 10:07 ` bert hubert
2002-06-26 0:22 ` [LARTC] htb problem Omar Armas
2002-06-26 0:32 ` Tomasz Wrona
2002-12-09 18:19 ` [LARTC] HTB Problem lartc
2002-12-09 18:57 ` Stef Coene
2003-01-23 22:47 ` [LARTC] HTB problem Jay Wineinger
2003-01-24 2:15 ` mingching.tiew
2003-01-24 2:39 ` Jay Wineinger
2003-06-12 19:21 ` [LARTC] htb problem Ratel
2003-06-12 19:23 ` Esteban
2003-06-12 19:35 ` Stef Coene
2003-06-12 20:04 ` Morten Isaksen
2003-06-12 20:51 ` Stef Coene
2003-06-12 20:54 ` Stef Coene
2003-06-12 21:15 ` Stef Coene
2003-06-14 21:46 ` terahz
2003-06-15 18:14 ` Stef Coene
2003-06-25 11:14 ` Ratel
2003-07-24 14:26 ` Delcho
2003-07-28 17:49 ` Stef Coene
2003-09-30 13:44 ` [LARTC] HTB Problem Guilherme Benkenstein
2003-09-30 19:59 ` Stef Coene
2003-12-02 23:08 ` [LARTC] HTB problem Mihai Tanasescu
2003-12-04 5:16 ` Mihai Tanasescu
2003-12-04 7:40 ` Catalin BOIE
-- strict thread matches above, loose matches on Subject: below --
2004-09-06 21:56 Cow
2004-09-07 11:08 ` zytek
2004-09-07 20:28 ` Cow
2004-09-07 21:16 ` [LARTC] HTB Problem Cow
2004-09-07 21:18 ` [LARTC] HTB problem Cow
2004-09-07 21:53 ` Andreas Klauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-100813599020773@msgid-missing \
--to=yangrunhua@njupt.edu.cn \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.