From: Stef Coene <stef.coene@docum.org>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] htb problem
Date: Thu, 12 Jun 2003 20:54:13 +0000 [thread overview]
Message-ID: <marc-lartc-105545153032719@msgid-missing> (raw)
In-Reply-To: <marc-lartc-100803866815679@msgid-missing>
On Thursday 12 June 2003 21:46, Esteban wrote:
> Stef! please explain me this:
> When i use traffic shaper, i apply the root to the innterface i want to
> controll the packets that are leaving right?
Yes.
> The sum of classes "should"
> not be greater than the root one.
> Supossing i have 2 nics. One for internal (eth1) and other for internet
> (eth0). i can mangle packets:
> -t mangle -I PREROUTING -i eth1 -j MARK --set-mark 1
>
> and then filter them all on the eth0 device with:
> tc filter add dev $DEV protocol ip parent 1:0 prio 1 handle 0x1 fw flowid
> 1:20 is this okay?
Yes.
> Cause for me, is not working.
> jeje..i see packets accounting on the right class, but they dont go to the
> speed i want (i see that in that class are much packets "lended")..that
> might be that that class is asking for BW to greater classes? if you can
> would be a great help to clear out this doubts!
So your filters are working. The lended packets are not important.
For your htb setup, have you read the docs I collected on www.docum.org ?
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2003-06-12 20:54 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-11 2:46 [LARTC] HTB problem yangrunhua
2001-12-11 9:21 ` bert hubert
2001-12-11 9:34 ` yangrunhua
2001-12-11 9:35 ` yangrunhua
2001-12-11 11:10 ` bert hubert
2001-12-12 5:47 ` yangrunhua
2001-12-12 10:02 ` yangrunhua
2001-12-12 11:40 ` Martin Devera
2001-12-12 13:50 ` bert hubert
2001-12-12 23:48 ` yangrunhua
2001-12-13 10:07 ` bert hubert
2002-06-26 0:22 ` [LARTC] htb problem Omar Armas
2002-06-26 0:32 ` Tomasz Wrona
2002-12-09 18:19 ` [LARTC] HTB Problem lartc
2002-12-09 18:57 ` Stef Coene
2003-01-23 22:47 ` [LARTC] HTB problem Jay Wineinger
2003-01-24 2:15 ` mingching.tiew
2003-01-24 2:39 ` Jay Wineinger
2003-06-12 19:21 ` [LARTC] htb problem Ratel
2003-06-12 19:23 ` Esteban
2003-06-12 19:35 ` Stef Coene
2003-06-12 20:04 ` Morten Isaksen
2003-06-12 20:51 ` Stef Coene
2003-06-12 20:54 ` Stef Coene [this message]
2003-06-12 21:15 ` Stef Coene
2003-06-14 21:46 ` terahz
2003-06-15 18:14 ` Stef Coene
2003-06-25 11:14 ` Ratel
2003-07-24 14:26 ` Delcho
2003-07-28 17:49 ` Stef Coene
2003-09-30 13:44 ` [LARTC] HTB Problem Guilherme Benkenstein
2003-09-30 19:59 ` Stef Coene
2003-12-02 23:08 ` [LARTC] HTB problem Mihai Tanasescu
2003-12-04 5:16 ` Mihai Tanasescu
2003-12-04 7:40 ` Catalin BOIE
-- strict thread matches above, loose matches on Subject: below --
2004-09-06 21:56 Cow
2004-09-07 11:08 ` zytek
2004-09-07 20:28 ` Cow
2004-09-07 21:16 ` [LARTC] HTB Problem Cow
2004-09-07 21:18 ` [LARTC] HTB problem Cow
2004-09-07 21:53 ` Andreas Klauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-105545153032719@msgid-missing \
--to=stef.coene@docum.org \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.