Re: [LARTC] htb problem

[Stef Coene <stef.coene@docum.org>]

On Thursday 12 June 2003 22:04, Morten Isaksen wrote:
> > -----Original Message-----
> > From: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl] On
> > Behalf Of Stef Coene
> > Sent: 12. juni 2003 21:35
> > To: Ratel; lartc@mailman.ds9a.nl
> > Subject: Re: [LARTC] htb problem
> >
> > > adequate lines from firewall script :
> > > [...]
> > > # ftp
> > > $IPTABLES -A FORWARD -p tcp -s 0/0 -d 0/0 --dport 21 -m state --state
> > > NEW,ESTABLISHED -t mangle -j MARK --set-mark 3
> > > # ssh
> > > $$IPTABLES -A FORWARD -p tcp -s 0/0 -d 0/0 --dport 22 -m state --state
> > > NEW,ESTABLISHED -t mangle -j MARK --set-mark 2
> > > # smtp
> > > $IPTABLES -A FORWARD -p tcp -s 0/0 -d 0/0 --dport 25 -m state --state
> > > NEW,ESTABLISHED -t mangle -j MARK --set-mark 4
> > > [...]
> >
> > Mhh.  Can you check with iptables -L -v -n that your packets are marked?
> > And
> > can you tell us what's your setup ?  I mean wich nic is connected to the
> > internet, what do you want to shape, is this also a firewall?  And try
> > marking in the PREROUTING tables.
>
> I have the same problem. According to iptables the packets are marked but
> all the traffic goes to the root htb class.
Mhh.  Some commands that works for me :

tc filter add dev eth0 parent 1: protocol ip handle 1 fw classid 1:100
iptables -A OUTPUT -t mangle -p tcp --dport 2000 -j MARK --set-mark 1


Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/