[LARTC] HTB + tc line

[LARTC] HTB + tc line

[LuisMi]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I did here...
[root@echelon root]# tc class add dev eth0 parent 1: classid 1:1 htb rate 10mbps

and then...

[root@echelon root]# tc -s -d class show dev eth0
class htb 1:1 root prio 0 rate 80Mbit ceil 80Mbit burst 106440b/8 mpu 0b 
cburst 106440b/8 mpu 0b quantum 60000 level 0
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
 lended: 0 borrowed: 0 giants: 0 injects: 0
 tokens: 8316 ctokens: 8316

My question is...
rate 80Mbit ceil 80Mbit?????????????????????

I have a 10mbps link over ethernet (realtek 8029), no fast-ethernet
Is that correct? 80 Mbit?

Thanks

- -- 
+-------------------------------------------------------------------+
| Luis Miguel Cruz.                                                 |
|                                                                   |
|  [ADPSOFT] http://www.adpsoft.com                                 |
|  "Connecting your business"                                       |
|                                                                   |
|  irc.irc-hispano.org -> #redhat                                   |
|  http://www.flcnet.es/tbe/luismi                                  |
|  Canal IRC para usuarios RedHat Linux                             |
|								    |
|  Public Key: http://www.flcnet.es/tbe/luismi/nadie/luismi_adp.asc |
+-------------------------------------------------------------------+
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjyH/fMACgkQvQHLTzrFJlet5ACfdfyVwudUIF70SayCi549Uqv8
HrUAn17iSn5rNoL0COb76ZaFQm3bAyKU
=kRjW
-----END PGP SIGNATURE-----

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] HTB + tc line

[Stef Coene]

On Friday 08 March 2002 00:55, LuisMi wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> I did here...
> [root@echelon root]# tc class add dev eth0 parent 1: classid 1:1 htb rate
> 10mbps
>
> and then...
>
> [root@echelon root]# tc -s -d class show dev eth0
> class htb 1:1 root prio 0 rate 80Mbit ceil 80Mbit burst 106440b/8 mpu 0b
> cburst 106440b/8 mpu 0b quantum 60000 level 0
>  Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>  lended: 0 borrowed: 0 giants: 0 injects: 0
>  tokens: 8316 ctokens: 8316
>
> My question is...
> rate 80Mbit ceil 80Mbit?????????????????????
That is OK.
10mbps = 10mbyte/s = 80 mbit/s = 80Mbit
And you provided no ceil so ceil = rate.

Stef

-- 

stef.coene@docum.org
 More QOS info : http://www.docum.org/
 Title : "Using Linux as bandwidth manager"
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] HTB + tc line

[LuisMi]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Fri, 8 Mar 2002, Stef Coene wrote:

> On Friday 08 March 2002 00:55, LuisMi wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > I did here...
> > [root@echelon root]# tc class add dev eth0 parent 1: classid 1:1 htb rate
> > 10mbps
> >
> > and then...
> >
> > [root@echelon root]# tc -s -d class show dev eth0
> > class htb 1:1 root prio 0 rate 80Mbit ceil 80Mbit burst 106440b/8 mpu 0b
> > cburst 106440b/8 mpu 0b quantum 60000 level 0
> >  Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> >  lended: 0 borrowed: 0 giants: 0 injects: 0
> >  tokens: 8316 ctokens: 8316
> >
> > My question is...
> > rate 80Mbit ceil 80Mbit?????????????????????
> That is OK.
> 10mbps = 10mbyte/s = 80 mbit/s = 80Mbit
> And you provided no ceil so ceil = rate.

well, I was talking about 10 megabits not megabytes.
How can I tell 10 megabits to tc command line?


Thanks

LuisMi
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjyNOSQACgkQvQHLTzrFJlddFQCcC3vyejmKlnzhC1Ebpoh+qSAK
eo0AoI4qZwUdxMdfwK/9lkzgyA+vXUpj
=wubt
-----END PGP SIGNATURE-----

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] HTB + tc line

[Stef Coene]

> well, I was talking about 10 megabits not megabytes.
> How can I tell 10 megabits to tc command line?
See lartc HOWTO :
http://lartc.org/HOWTO/cvs/2.4routing/output/2.4routing-9.html

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/