* [LARTC] Multipath routing with different bandwidth and cost
@ 2003-01-29 11:04 Benjamin Ryzman
0 siblings, 0 replies; only message in thread
From: Benjamin Ryzman @ 2003-01-29 11:04 UTC (permalink / raw)
To: lartc
Hi,
My workstation is connected to a LAN with two different gateways. GW1 is
rate-limited to 2Mbps while GW2 is unlimited. Routing through GW1
is cheaper, thus I don't want to be using only GW2.
At any given time, I would like to be able to use GW1 while keeping it
uncongestioned and to use GW2 for the remaining traffic.
I know I can create a weighted multipath route but I believe the weight
doesn't allow me to specify the rate-limitation of GW1.
Do you think I can come to a solution using iproute2, netfilter and tc?
Regards,
Benjamin
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-01-29 11:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-01-29 11:04 [LARTC] Multipath routing with different bandwidth and cost Benjamin Ryzman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.