* Re: [LARTC] Rshaper-2.01 issue with Linux8.0
2003-04-19 11:54 [LARTC] Rshaper-2.01 issue with Linux8.0 Tushar Gupta
@ 2003-04-19 12:05 ` Stef Coene
2003-04-20 10:53 ` Tushar Gupta
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Stef Coene @ 2003-04-19 12:05 UTC (permalink / raw)
To: lartc
On Saturday 19 April 2003 13:42, Tushar Gupta wrote:
> I am facing problem with running rshaper-2.01 with Linux 8.0 version
> (redhat).
> It used to run fine with Linux7.1 version.
>
> Is there any update on rshaper available for 8.0
I don't know.
But if you want to shape traffic, you better use the tc command line to
configure a htb or cbq setup. This is more powerfull then rshaper.
More info about tc can be found on www.lartc.org and www.docum.org.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 5+ messages in thread* RE: [LARTC] Rshaper-2.01 issue with Linux8.0
2003-04-19 11:54 [LARTC] Rshaper-2.01 issue with Linux8.0 Tushar Gupta
2003-04-19 12:05 ` Stef Coene
@ 2003-04-20 10:53 ` Tushar Gupta
2003-04-20 22:01 ` Stef Coene
2003-04-20 22:04 ` Stef Coene
3 siblings, 0 replies; 5+ messages in thread
From: Tushar Gupta @ 2003-04-20 10:53 UTC (permalink / raw)
To: lartc
I have looked at tc and information on www.docum.org earlier too. I have
a feeling that it is going to take a lot of time before I become
comfortable with tc/htb/cbq, and understand all its nuiances.
I am looking forward to some quick and maybe not so good solution as
directly working with tc. With rshaper I just needed to specify IP and
amount of max bandwidth I want to allocate to the host, and I am up and
running.
Tushar
-----Original Message-----
From: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl]
On Behalf Of Stef Coene
Sent: Saturday, April 19, 2003 5:36 PM
To: Tushar Gupta; lartc@mailman.ds9a.nl
Subject: Re: [LARTC] Rshaper-2.01 issue with Linux8.0
On Saturday 19 April 2003 13:42, Tushar Gupta wrote:
> I am facing problem with running rshaper-2.01 with Linux 8.0 version
> (redhat). It used to run fine with Linux7.1 version.
>
> Is there any update on rshaper available for 8.0
I don't know.
But if you want to shape traffic, you better use the tc command line to
configure a htb or cbq setup. This is more powerfull then rshaper. More
info about tc can be found on www.lartc.org and www.docum.org.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [LARTC] Rshaper-2.01 issue with Linux8.0
2003-04-19 11:54 [LARTC] Rshaper-2.01 issue with Linux8.0 Tushar Gupta
2003-04-19 12:05 ` Stef Coene
2003-04-20 10:53 ` Tushar Gupta
@ 2003-04-20 22:01 ` Stef Coene
2003-04-20 22:04 ` Stef Coene
3 siblings, 0 replies; 5+ messages in thread
From: Stef Coene @ 2003-04-20 22:01 UTC (permalink / raw)
To: lartc
On Sunday 20 April 2003 12:41, Tushar Gupta wrote:
> I have looked at tc and information on www.docum.org earlier too. I have
> a feeling that it is going to take a lot of time before I become
> comfortable with tc/htb/cbq, and understand all its nuiances.
>
> I am looking forward to some quick and maybe not so good solution as
> directly working with tc. With rshaper I just needed to specify IP and
> amount of max bandwidth I want to allocate to the host, and I am up and
> running.
If you want to do only that, that's not soo difficult. Using htb is easy if
you copy a working script.
Of course, you need to read some docs to understand how it works. But it's
not that difficult if you don't care about the fine tuning options.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [LARTC] Rshaper-2.01 issue with Linux8.0
2003-04-19 11:54 [LARTC] Rshaper-2.01 issue with Linux8.0 Tushar Gupta
` (2 preceding siblings ...)
2003-04-20 22:01 ` Stef Coene
@ 2003-04-20 22:04 ` Stef Coene
3 siblings, 0 replies; 5+ messages in thread
From: Stef Coene @ 2003-04-20 22:04 UTC (permalink / raw)
To: lartc
On Sunday 20 April 2003 12:41, Tushar Gupta wrote:
> I have looked at tc and information on www.docum.org earlier too. I have
> a feeling that it is going to take a lot of time before I become
> comfortable with tc/htb/cbq, and understand all its nuiances.
>
> I am looking forward to some quick and maybe not so good solution as
> directly working with tc. With rshaper I just needed to specify IP and
> amount of max bandwidth I want to allocate to the host, and I am up and
> running.
Something else. RedHat is not Linux. And Linux is not RedHat.
So it's not Linux8.0, but RedHat 8.0. But it's the linux kernel 2.4.19 or so.
So if you need some help, plz specify the output of "uname -a" and your
distribution like ReadHat 8.0.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 5+ messages in thread