Re: [LARTC] htb v3 not as good as htb v2?

[Anton Yurchenko <phila@dg.net.ua>]

nuclearcat@nuclearcat.com wrote:

>Hello Anton,
>
>Wednesday, October 8, 2003, 4:49:30 PM, you wrote:
>
>I am using HTB3 with more than 10 megabits customers, and
>amount of classes about 100-200 without any problem.
>Only one what i do - i make filter with lowest priority, to not pass
>ass unclassified traffic to default class, just to drop it. I think
>you just need review your classes, because also if you have any rate
>more 468 Kbit, you need change r2q or quantum.
>  
>
the problem was observed even when only adding a qdisc, no classes. how 
can this be?

>AY> Hello,
>
>AY> I`ve been using htb v2 for more then a year without any major problems. 
>AY> Recently I needed to upgrade to newer kernel becouse of non LARTC 
>AY> related issues. After installing 2.4.22 when the htb qdisc was attached 
>AY> to the interface even without any rules, I was not able to send more 
>AY> ~1mbit through the interface. After I reversed the htb3 patch and 
>AY> rebuild with htb2 everything works as normal. Has anyone experienced the 
>AY> same issue? thanks
>
>
>
>
>  
>


-- 

Anton Yurchenko<phila@dg.net.ua>
Digital Generation


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/