* [LARTC] qdisc on bridge? @ 2003-11-26 19:51 Jon Zeeff 2003-11-26 20:09 ` Damjan 2003-11-26 20:22 ` Robert Kurjata 0 siblings, 2 replies; 3+ messages in thread From: Jon Zeeff @ 2003-11-26 19:51 UTC (permalink / raw) To: lartc I've set up bridging between two interfaces and this gives me a new "br0". When I apply qdiscs to it, what am I controlling - traffic out of eth1 or traffic headed out eth2? Should I not be using br0 and refer to eth1 and eth2? _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] qdisc on bridge? 2003-11-26 19:51 [LARTC] qdisc on bridge? Jon Zeeff @ 2003-11-26 20:09 ` Damjan 2003-11-26 20:22 ` Robert Kurjata 1 sibling, 0 replies; 3+ messages in thread From: Damjan @ 2003-11-26 20:09 UTC (permalink / raw) To: lartc > I've set up bridging between two interfaces and this gives me a new > "br0". When I apply qdiscs to it, what am I controlling - traffic out of > eth1 or traffic headed out eth2? > > Should I not be using br0 and refer to eth1 and eth2? yes, this is true. Use eth1 and eth2 not br0. -- Damjan Georgievski jabberID: damjan@bagra.net.mk _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] qdisc on bridge? 2003-11-26 19:51 [LARTC] qdisc on bridge? Jon Zeeff 2003-11-26 20:09 ` Damjan @ 2003-11-26 20:22 ` Robert Kurjata 1 sibling, 0 replies; 3+ messages in thread From: Robert Kurjata @ 2003-11-26 20:22 UTC (permalink / raw) To: lartc Witaj Jon, W Twoim liœcie datowanym 26 listopada 2003 (20:51:29) mo¿na przeczytaæ: JZ> I've set up bridging between two interfaces and this gives me a new JZ> "br0". When I apply qdiscs to it, what am I controlling - traffic out of JZ> eth1 or traffic headed out eth2? JZ> Should I not be using br0 and refer to eth1 and eth2? just use eth1 and eth2 to control traffic not a virtual br0 device. JZ> _______________________________________________ JZ> LARTC mailing list / LARTC@mailman.ds9a.nl JZ> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ -- Pozdrowienia, Robert _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-11-26 20:22 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2003-11-26 19:51 [LARTC] qdisc on bridge? Jon Zeeff 2003-11-26 20:09 ` Damjan 2003-11-26 20:22 ` Robert Kurjata
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.