All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Navid Ghahremani" <ghahramani.navid@gmail.com>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH v2 21/24] dt-bindings: usb: Add ZTE ZX279128S DWC3 controller
Date: Thu, 15 Oct 2026 07:24:42 +0000	[thread overview]
Message-ID: <sashiko-outbox-172415@kernel.org> (raw)
In-Reply-To: <20261014072109.1759502-22-ghahramani.navid@gmail.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] dt-bindings: usb: missing reset header and incorrect macros in example
--

commit 4b49967364799b06d338b499b3fff468b97de327
Author: Navid Ghahremani <ghahramani.navid@gmail.com>

dt-bindings: usb: Add ZTE ZX279128S DWC3 controller

Describe the USB host integration with three CRM clocks and four reset
bits.

> diff --git a/Documentation/devicetree/bindings/usb/zte,zx279128s-dwc3.yaml b/Documentation/devicetree/bindings/usb/zte,zx279128s-dwc3.yaml
> new file mode 100644
> index 0000000000000..2fd9fe0cc74bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/zte,zx279128s-dwc3.yaml

[ ... ]

> +examples:
> +  - |
> +    #include <dt-bindings/clock/zte,zx279128s-crm.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    usb@9100000 {
> +        compatible = "zte,zx279128s-dwc3";
> +        reg = <0x09100000 0x100000>;
> +        interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&topcrm ZX279128S_TOP_USB_REF>,
> +                 <&topcrm ZX279128S_TOP_USB_ACLK>,
> +                 <&topcrm ZX279128S_TOP_USB_SUSPEND>;
> +        clock-names = "ref", "bus_early", "suspend";
> +        resets = <&topcrm ZX279128S_TOP_RST_USB_B11>,
> +                 <&topcrm ZX279128S_TOP_RST_USB_B14>,
> +                 <&topcrm ZX279128S_TOP_RST_USB_B9>,
> +                 <&topcrm ZX279128S_TOP_RST_USB_B10>;

[Severity: Low]
Will this example pass make dt_binding_check?

The example is missing an include for <dt-bindings/reset/zte,zx279128s-reset.h>.

Additionally, the macros used here (e.g., ZX279128S_TOP_RST_USB_B11) appear
to be misspelled. The actual macros defined in the reset header are prefixed
with ZX279128S_RESET_ (e.g., ZX279128S_RESET_USB_B11).

This discrepancy will result in a build failure when validating the schema.

> +        dr_mode = "host";
> +    };

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261014072109.1759502-1-ghahramani.navid@gmail.com?part=21

  reply	other threads:[~2026-10-15  7:24 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-14  7:20 [PATCH v2 00/24] ARM: zte: Add support for Sanechips ZX279128S and ZTE ZXHN H3600 Navid Ghahremani
2026-10-14  7:20 ` [PATCH v2 01/24] MAINTAINERS: Consolidate ARM/ZTE ZX SOC SUPPORT with Stefan Doesinger Navid Ghahremani
2026-10-14 20:11   ` Stefan Dösinger
2026-10-14  7:20 ` [PATCH v2 02/24] dt-bindings: arm: Add ZTE ZX279128S platform descriptions Navid Ghahremani
2026-10-14  7:20 ` [PATCH v2 03/24] ARM: zte: Add ZX279128S platform and CPU hotplug support Navid Ghahremani
2026-10-14  7:20 ` [PATCH v2 04/24] dt-bindings: clock: Add ZTE ZX279128S CRM clock bindings Navid Ghahremani
2026-10-14 21:48   ` Stefan Dösinger
2026-10-15  7:24   ` sashiko-bot
2026-10-15  9:25   ` Krzysztof Kozlowski
2026-10-15  9:26   ` Krzysztof Kozlowski
2026-10-14  7:20 ` [PATCH v2 05/24] dt-bindings: reset: Add ZTE ZX279128S reset controller bindings Navid Ghahremani
2026-10-15  7:24   ` sashiko-bot
2026-10-15  9:27   ` Krzysztof Kozlowski
2026-10-14  7:20 ` [PATCH v2 06/24] clk: zte: Add ZX279128S CRM clock and reset driver Navid Ghahremani
2026-10-14 13:21   ` Philipp Zabel
2026-10-14 19:39   ` Stefan Dösinger
2026-10-15  7:24   ` sashiko-bot
2026-10-14  7:20 ` [PATCH v2 07/24] dt-bindings: gpio: Add ZTE ZX279128S GPIO controller Navid Ghahremani
2026-10-14  7:20 ` [PATCH v2 08/24] gpio: Add ZTE ZX279128S GPIO driver Navid Ghahremani
2026-10-14 21:11   ` Stefan Dösinger
2026-10-15 12:25   ` Bartosz Golaszewski
2026-10-14  7:20 ` [PATCH v2 09/24] dt-bindings: pinctrl: pinctrl-single: Add ZTE ZX279128S pin mux Navid Ghahremani
2026-10-14  7:20 ` [PATCH v2 10/24] dt-bindings: phy: Add ZTE ZX279128S PCIe PHY binding Navid Ghahremani
2026-10-14  7:20   ` Navid Ghahremani
2026-10-15  7:24   ` sashiko-bot
2026-10-15  7:24     ` sashiko-bot
2026-10-15  9:29   ` Krzysztof Kozlowski
2026-10-15  9:29     ` Krzysztof Kozlowski
2026-10-14  7:20 ` [PATCH v2 11/24] phy: zte: Add ZTE ZX279128S PCIe PHY driver Navid Ghahremani
2026-10-14  7:20   ` Navid Ghahremani
2026-10-15  7:24   ` sashiko-bot
2026-10-14  7:20 ` [PATCH v2 12/24] dt-bindings: PCI: Add ZTE ZX279128S host controller Navid Ghahremani
2026-10-15  7:24   ` sashiko-bot
2026-10-14  7:20 ` [PATCH v2 13/24] PCI: dwc: Add ZTE ZX279128S host controller driver Navid Ghahremani
2026-10-14 13:19   ` Bjorn Helgaas
2026-10-14 21:06     ` Stefan Dösinger
2026-10-15  7:24   ` sashiko-bot
2026-10-14  7:20 ` [PATCH v2 14/24] dt-bindings: net: Add ZTE ZX279128S MDIO controller Navid Ghahremani
2026-10-14  7:20 ` [PATCH v2 15/24] net: mdio: " Navid Ghahremani
2026-10-14 12:13   ` Andrew Lunn
2026-10-14  7:20 ` [PATCH v2 16/24] net: phy: Add Sanechips ZX5201 PHY support Navid Ghahremani
2026-10-14 12:37   ` Andrew Lunn
2026-10-14  7:20 ` [PATCH v2 17/24] dt-bindings: net: Add ZTE ZX279128S Ethernet switch Navid Ghahremani
2026-10-14  7:20 ` [PATCH v2 18/24] net: ethernet: zte: Add ZX279128S Ethernet switch driver Navid Ghahremani
2026-10-14  7:20 ` [PATCH v2 19/24] dt-bindings: spi: Add ZTE ZX family SPI flash controller binding Navid Ghahremani
2026-10-14 20:33   ` Stefan Dösinger
2026-10-15  9:35   ` Krzysztof Kozlowski
2026-10-15  9:36   ` Krzysztof Kozlowski
2026-10-14  7:21 ` [PATCH v2 20/24] spi: zx: Add ZTE ZX family SPI flash controller driver Navid Ghahremani
2026-10-14 19:28   ` Stefan Dösinger
2026-10-15  9:34   ` Krzysztof Kozlowski
2026-10-15 14:29   ` kernel test robot
2026-10-14  7:21 ` [PATCH v2 21/24] dt-bindings: usb: Add ZTE ZX279128S DWC3 controller Navid Ghahremani
2026-10-15  7:24   ` sashiko-bot [this message]
2026-10-14  7:21 ` [PATCH v2 22/24] usb: dwc3: generic-plat: Add ZTE ZX279128S Navid Ghahremani
2026-10-15  7:24   ` sashiko-bot
2026-10-14  7:21 ` [PATCH v2 23/24] ARM: dts: zte: Add ZX279128S SoC description Navid Ghahremani
2026-10-14  7:21 ` [PATCH v2 24/24] ARM: dts: zte: Add ZTE ZXHN H3600 board Navid Ghahremani
2026-10-14 12:52   ` Andrew Lunn
2026-10-15  7:24   ` sashiko-bot
2026-10-14 20:00 ` [PATCH v2 00/24] ARM: zte: Add support for Sanechips ZX279128S and ZTE ZXHN H3600 Stefan Dösinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-172415@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=ghahramani.navid@gmail.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.