From: sashiko-bot@kernel.org
To: "Yongxing Mou" <yongxing.mou@oss.qualcomm.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v9 17/29] drm/msm/dp: move link capabilities to dp_link
Date: Thu, 19 Nov 2026 08:41:05 +0000 [thread overview]
Message-ID: <sashiko-outbox-222696@kernel.org> (raw)
In-Reply-To: <20261119-msm-dp-mst-v9-17-ca61be4edfc3@oss.qualcomm.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] drm/msm/dp: msm_dp_display_mode_valid() ignores info for
dp->connector
--
commit 9b5a2b4fd3cc486b889af124992a49541fad1c12
Author: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
drm/msm/dp: move link capabilities to dp_link
This commit moves link_info (renamed to link_caps) and vsc_sdp_supported
from struct msm_dp_panel to struct msm_dp_link so that SST and MST panels
share the physical link capabilities.
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index fb72b77e9c95e..a77a286a24629 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
[ ... ]
> @@ -813,7 +813,7 @@ enum drm_mode_status msm_dp_display_mode_valid(struct msm_dp *dp,
> }
>
> msm_dp_display = container_of(dp, struct msm_dp_display_private, msm_dp_display);
> - link_info = &msm_dp_display->panel->link_info;
> + link_info = &msm_dp_display->link->link_caps;
>
> is_yuv_420 = drm_mode_is_420_only(&dp->connector->display_info, mode);
>
> @@ -821,7 +821,7 @@ enum drm_mode_status msm_dp_display_mode_valid(struct msm_dp *dp,
> * YUV 420 is carried over DP by signalling the colorimetry through a
> * VSC SDP, so a 420-only mode cannot be driven without VSC SDP support.
> */
> - if (is_yuv_420 && !msm_dp_display->panel->vsc_sdp_supported)
> + if (is_yuv_420 && !msm_dp_display->link->vsc_sdp_supported)
> return MODE_NO_420;
>
> link_pclk_khz = is_yuv_420 ? mode_pclk_khz / 2 : mode_pclk_khz;
[Severity: Medium]
Should msm_dp_display_mode_valid() use its info parameter instead of
dp->connector->display_info when checking drm_mode_is_420_only() and
reading info->bpc?
In MST mode, msm_dp_mst_connector_mode_valid() passes the per-port MST
connector's display_info as info, whereas dp->connector is the root SST
connector whose EDID is not read for MST sinks. Using
dp->connector->display_info causes YUV 4:2:0-only modes on MST sinks to
go undetected (skipping the vsc_sdp_supported check and failing to halve
the pixel clock, which can reject valid 4:2:0 modes with MODE_CLOCK_HIGH
or MODE_BAD) and computes mode_bpp from the wrong connector.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261119-msm-dp-mst-v9-0-ca61be4edfc3@oss.qualcomm.com?part=17
next prev parent reply other threads:[~2026-11-19 8:41 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 8:24 [PATCH v9 00/29] drm/msm/dp: Add MST support for MSM chipsets Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 01/29] drm/msm/dp: skip sink requests while the mainlink clocks are off Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 02/29] drm/msm/dp: add support to send ACT packets for MST Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 03/29] drm/msm/dp: add support to enable MST in mainlink control Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 04/29] drm/msm/dp: no need to update tu calculation for mst Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 05/29] drm/msm/dp: always program MST_FIFO_CONSTANT_FILL for MST use cases Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 06/29] drm/msm/dp: add support for sending VCPF packets in DP controller Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 07/29] drm/msm/dp: add support for MST channel slot allocation Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 08/29] drm/msm/dp: replace power_on with active_stream_mask Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 09/29] drm/msm/dp: factor out _helper variants of bridge ops accepting a panel Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 10/29] drm/msm/dp: add link_ready to manage link-level operations Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 11/29] drm/msm/dp: add msm_dp_display_get_panel() to initialize DP panel Yongxing Mou
2026-11-19 8:36 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 12/29] drm/msm/dp: introduce dp_mst_drm module Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 13/29] drm/msm/dp: add MST connector creation and topology callbacks Yongxing Mou
2026-11-19 8:49 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 14/29] drm/msm/dpu: pass msm_display_info to dpu_encoder_get_intf() Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 15/29] drm/msm/dpu: use stream_id to select MST interfaces Yongxing Mou
2026-11-19 8:35 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 16/29] drm/msm/dpu: add per-stream MST encoders Yongxing Mou
2026-11-19 8:51 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 17/29] drm/msm/dp: move link capabilities to dp_link Yongxing Mou
2026-11-19 8:41 ` sashiko-bot [this message]
2026-11-19 8:24 ` [PATCH v9 18/29] drm/msm/dp: add atomic stream handling for MST Yongxing Mou
2026-11-19 9:01 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 19/29] drm/bridge_connector: suppress hotplug for IRQ_HPD without status changes Yongxing Mou
2026-11-19 9:01 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 20/29] drm/bridge_connector: avoid detect-based HPD notifications for DisplayPort Yongxing Mou
2026-11-19 8:45 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 21/29] drm/msm/dp: add HPD callback for dp MST Yongxing Mou
2026-11-19 8:50 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 22/29] drm/msm/dp: wire MST helpers into atomic check and commit paths Yongxing Mou
2026-11-19 8:46 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 23/29] drm/msm/dp: mark the SST bridge disconnected when mst is active Yongxing Mou
2026-11-19 8:46 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 24/29] drm/msm/dp: enable MST on capable sinks Yongxing Mou
2026-11-19 9:05 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 25/29] drm/msm/dp: mark the SST bridge disconnected when an MST-capable sink is present Yongxing Mou
2026-11-19 8:51 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 26/29] drm/msm/dp: wake threaded handler for HPD IRQs Yongxing Mou
2026-11-19 8:49 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 27/29] drm/msm/dp: ignore IRQ HPD latched together with an unplug Yongxing Mou
2026-11-19 8:24 ` [PATCH v9 28/29] drm/msm/dp: select MST stream bpp during atomic check Yongxing Mou
2026-11-19 8:50 ` sashiko-bot
2026-11-19 8:24 ` [PATCH v9 29/29] soc: qcom: pmic-glink-altmode: skip retimer reset on DP IRQ Yongxing Mou
2026-11-19 11:54 ` [PATCH v9 00/29] drm/msm/dp: Add MST support for MSM chipsets Joonhoe Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-222696@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=yongxing.mou@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.