From: Dylan Reid <dgreid@chromium.org>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, Dylan Reid <dgreid@chromium.org>, swarren@wwwdotorg.org
Subject: [RFCv2 20/22] ALSA: core - Define snd_pci_quirk without CONFIG_PCI
Date: Fri, 28 Feb 2014 15:41:31 -0800 [thread overview]
Message-ID: <1393630893-29010-21-git-send-email-dgreid@chromium.org> (raw)
In-Reply-To: <1393630893-29010-1-git-send-email-dgreid@chromium.org>
The hda codecs all use this struct and, with an HDA platform driver,
will be able to be built without PCI.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
---
include/sound/core.h | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/include/sound/core.h b/include/sound/core.h
index aac9a85..d3f5f81 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -433,7 +433,6 @@ static inline void snd_printdd(const char *format, ...) {}
#define gameport_get_port_data(gp) (gp)->port_data
#endif
-#ifdef CONFIG_PCI
/* PCI quirk list helper */
struct snd_pci_quirk {
unsigned short subvendor; /* PCI subvendor ID */
@@ -469,12 +468,26 @@ struct snd_pci_quirk {
#define snd_pci_quirk_name(q) ""
#endif
+#ifdef CONFIG_PCI
const struct snd_pci_quirk *
snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list);
const struct snd_pci_quirk *
snd_pci_quirk_lookup_id(u16 vendor, u16 device,
const struct snd_pci_quirk *list);
+#else
+static inline const struct snd_pci_quirk *
+snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list)
+{
+ return NULL;
+}
+
+static inline const struct snd_pci_quirk *
+snd_pci_quirk_lookup_id(u16 vendor, u16 device,
+ const struct snd_pci_quirk *list)
+{
+ return NULL;
+}
#endif
#endif /* __SOUND_CORE_H */
--
1.8.1.3.605.g02339dd
next prev parent reply other threads:[~2014-02-28 23:42 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-28 23:41 [RFC 00/19] Enable platform HDA drivers Dylan Reid
2014-02-28 23:41 ` [RFCv2 01/22] ALSA: hda - Move some definitions to new hda_priv.h Dylan Reid
2014-02-28 23:41 ` [RFCv2 02/22] ALSA: hda - Allow different ops to read/write registers Dylan Reid
2014-02-28 23:41 ` [RFCv2 03/22] ALSA: hda - Keep pointer to bdl_pos_fix in chip struct Dylan Reid
2014-02-28 23:41 ` [RFCv2 04/22] ALSA: hda - Use device pointer from the card instead of pci Dylan Reid
2014-02-28 23:41 ` [RFCv2 05/22] ALSA: hda - Add function pointer for disabling MSI Dylan Reid
2014-02-28 23:41 ` [RFCv2 06/22] ALSA: hda - remove unused clear of STATESTS Dylan Reid
2014-02-28 23:41 ` [RFCv2 07/22] ALSA: hda - Add jackpoll_ms to struct azx Dylan Reid
2014-02-28 23:41 ` [RFCv2 08/22] ALSA: hda - Pass max_slots and power_save to codec_create Dylan Reid
2014-02-28 23:41 ` [RFCv2 09/22] ALSA: hda - Move snd page allocation to ops Dylan Reid
2014-02-28 23:41 ` [RFCv2 10/22] ALSA: hda - Add pcm_mmap_prepare op Dylan Reid
2014-02-28 23:41 ` [RFCv2 11/22] ALSA: hda - Add hda_controller.c and move pcm ops from hda_intel Dylan Reid
2014-02-28 23:41 ` [RFCv2 12/22] ALSA: hda - Pull pages allocation to hda_controller Dylan Reid
2014-02-28 23:41 ` [RFCv2 13/22] ALSA: hda - Move the dsp loader " Dylan Reid
2014-02-28 23:41 ` [RFCv2 14/22] ALSA: hda - Relocate RIRB/CORB interface " Dylan Reid
2014-02-28 23:41 ` [RFCv2 15/22] ALSA: hda - move alloc_cmd_io " Dylan Reid
2014-02-28 23:41 ` [RFCv2 16/22] ALSA: hda - Move low level functions " Dylan Reid
2014-02-28 23:41 ` [RFCv2 17/22] ALSA: hda - Add position_check op Dylan Reid
2014-02-28 23:41 ` [RFCv2 18/22] ALSA: hda - Move azx_interrupt to hda_controller Dylan Reid
2014-02-28 23:41 ` [RFCv2 19/22] ALSA: hda - Move codec create " Dylan Reid
2014-02-28 23:41 ` Dylan Reid [this message]
2014-02-28 23:41 ` [RFCv2 21/22] ALSA: hda - remove PCI dependency in Kconfig Dylan Reid
2014-02-28 23:41 ` [RFCv2 22/22] WIP: ALSA: hda - Add driver for Tegra SoC HDA Dylan Reid
2014-03-01 9:07 ` [RFC 00/19] Enable platform HDA drivers Takashi Iwai
2014-03-01 9:37 ` Dylan Reid
2014-03-01 10:42 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393630893-29010-21-git-send-email-dgreid@chromium.org \
--to=dgreid@chromium.org \
--cc=alsa-devel@alsa-project.org \
--cc=swarren@wwwdotorg.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox