Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Dylan Reid <dgreid@chromium.org>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, Dylan Reid <dgreid@chromium.org>, swarren@wwwdotorg.org
Subject: [RFCv2 05/22] ALSA: hda - Add function pointer for disabling MSI
Date: Fri, 28 Feb 2014 15:41:16 -0800	[thread overview]
Message-ID: <1393630893-29010-6-git-send-email-dgreid@chromium.org> (raw)
In-Reply-To: <1393630893-29010-1-git-send-email-dgreid@chromium.org>

This is a PCI-only feature, but adding a callback for it in the chip
structure breaks the PCI dependency in the RIRB code allowing the
logic there to be re-used by the platform HDA driver.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
---
 sound/pci/hda/hda_intel.c | 23 ++++++++++++++++++-----
 sound/pci/hda/hda_priv.h  |  4 ++++
 2 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 7630622..c4b6447 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -600,11 +600,8 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus,
 		dev_warn(chip->card->dev,
 			 "No response from codec, disabling MSI: last cmd=0x%08x\n",
 			 chip->last_cmd[addr]);
-		free_irq(chip->irq, chip);
-		chip->irq = -1;
-		pci_disable_msi(chip->pci);
-		chip->msi = 0;
-		if (azx_acquire_irq(chip, 1) < 0) {
+		if (chip->ops->disable_msi_reset_irq &&
+		    chip->ops->disable_msi_reset_irq(chip) < 0) {
 			bus->rirb_error = 1;
 			return -1;
 		}
@@ -3469,6 +3466,21 @@ static u8 pci_azx_readb(u8 *addr)
 	return readb(addr);
 }
 
+static int disable_msi_reset_irq(struct azx *chip)
+{
+	int err;
+
+	free_irq(chip->irq, chip);
+	chip->irq = -1;
+	pci_disable_msi(chip->pci);
+	chip->msi = 0;
+	err = azx_acquire_irq(chip, 1);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
 static const struct hda_controller_ops pci_hda_ops = {
 	.writel = pci_azx_writel,
 	.readl = pci_azx_readl,
@@ -3476,6 +3488,7 @@ static const struct hda_controller_ops pci_hda_ops = {
 	.readw = pci_azx_readw,
 	.writeb = pci_azx_writeb,
 	.readb = pci_azx_readb,
+	.disable_msi_reset_irq = disable_msi_reset_irq,
 };
 
 static int azx_probe(struct pci_dev *pci,
diff --git a/sound/pci/hda/hda_priv.h b/sound/pci/hda/hda_priv.h
index 17afe90..c231c11 100644
--- a/sound/pci/hda/hda_priv.h
+++ b/sound/pci/hda/hda_priv.h
@@ -285,6 +285,8 @@ struct azx_rb {
 	u32 res[AZX_MAX_CODECS];	/* last read value */
 };
 
+struct azx;
+
 /* Functions to read/write to hda registers. */
 struct hda_controller_ops {
 	/* Register Access */
@@ -294,6 +296,8 @@ struct hda_controller_ops {
 	u16 (*readw)(u16 *addr);
 	void (*writeb)(u8 value, u8 *addr);
 	u8 (*readb)(u8 *addr);
+	/* Disable msi if supported, PCI only */
+	int (*disable_msi_reset_irq)(struct azx *);
 };
 
 struct azx_pcm {
-- 
1.8.1.3.605.g02339dd

  parent reply	other threads:[~2014-02-28 23:42 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-28 23:41 [RFC 00/19] Enable platform HDA drivers Dylan Reid
2014-02-28 23:41 ` [RFCv2 01/22] ALSA: hda - Move some definitions to new hda_priv.h Dylan Reid
2014-02-28 23:41 ` [RFCv2 02/22] ALSA: hda - Allow different ops to read/write registers Dylan Reid
2014-02-28 23:41 ` [RFCv2 03/22] ALSA: hda - Keep pointer to bdl_pos_fix in chip struct Dylan Reid
2014-02-28 23:41 ` [RFCv2 04/22] ALSA: hda - Use device pointer from the card instead of pci Dylan Reid
2014-02-28 23:41 ` Dylan Reid [this message]
2014-02-28 23:41 ` [RFCv2 06/22] ALSA: hda - remove unused clear of STATESTS Dylan Reid
2014-02-28 23:41 ` [RFCv2 07/22] ALSA: hda - Add jackpoll_ms to struct azx Dylan Reid
2014-02-28 23:41 ` [RFCv2 08/22] ALSA: hda - Pass max_slots and power_save to codec_create Dylan Reid
2014-02-28 23:41 ` [RFCv2 09/22] ALSA: hda - Move snd page allocation to ops Dylan Reid
2014-02-28 23:41 ` [RFCv2 10/22] ALSA: hda - Add pcm_mmap_prepare op Dylan Reid
2014-02-28 23:41 ` [RFCv2 11/22] ALSA: hda - Add hda_controller.c and move pcm ops from hda_intel Dylan Reid
2014-02-28 23:41 ` [RFCv2 12/22] ALSA: hda - Pull pages allocation to hda_controller Dylan Reid
2014-02-28 23:41 ` [RFCv2 13/22] ALSA: hda - Move the dsp loader " Dylan Reid
2014-02-28 23:41 ` [RFCv2 14/22] ALSA: hda - Relocate RIRB/CORB interface " Dylan Reid
2014-02-28 23:41 ` [RFCv2 15/22] ALSA: hda - move alloc_cmd_io " Dylan Reid
2014-02-28 23:41 ` [RFCv2 16/22] ALSA: hda - Move low level functions " Dylan Reid
2014-02-28 23:41 ` [RFCv2 17/22] ALSA: hda - Add position_check op Dylan Reid
2014-02-28 23:41 ` [RFCv2 18/22] ALSA: hda - Move azx_interrupt to hda_controller Dylan Reid
2014-02-28 23:41 ` [RFCv2 19/22] ALSA: hda - Move codec create " Dylan Reid
2014-02-28 23:41 ` [RFCv2 20/22] ALSA: core - Define snd_pci_quirk without CONFIG_PCI Dylan Reid
2014-02-28 23:41 ` [RFCv2 21/22] ALSA: hda - remove PCI dependency in Kconfig Dylan Reid
2014-02-28 23:41 ` [RFCv2 22/22] WIP: ALSA: hda - Add driver for Tegra SoC HDA Dylan Reid
2014-03-01  9:07 ` [RFC 00/19] Enable platform HDA drivers Takashi Iwai
2014-03-01  9:37   ` Dylan Reid
2014-03-01 10:42     ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393630893-29010-6-git-send-email-dgreid@chromium.org \
    --to=dgreid@chromium.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=swarren@wwwdotorg.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox