From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
dmurphy@ti.com
Cc: alsa-devel@alsa-project.org
Subject: [PATCH v2 00/23] ASoC: tas2552: Fixes, cleanups and improvements
Date: Thu, 4 Jun 2015 16:04:12 +0300 [thread overview]
Message-ID: <1433423075-14142-1-git-send-email-peter.ujfalusi@ti.com> (raw)
Hi,
Changes since v01:
- missing patch found. It was merged with the previous patch while fixing
checkpatch errors (patch 19 got squashed to patch 18)
- Sorry for this.
I have used the TAS2552-EVM to verify that my setup is in working condition for
a work on other audio product.
During the bringup of the EVM I have faced some issues and limitation with the
driver. The result is this series against the tas2552 driver.
Notable changes:
- Fixes for kernel crashes
- The enable-gpio was not optional as it was documented in the DTS
- Register bit definitions were not correct in several places
- Adding recommended startup/stop sequence
- Handling of sample formats the driver claims to support
- PLL configuration fixes and reference clock selection
- TDM support
- Gain control fix and control to select DIN source
Regards,
Peter
---
Peter Ujfalusi (23):
ASoC: tas2552: Make the enable-gpio really optional
ASoC: tas2552: Fix kernel crash when the codec is loaded but not part
of a card
ASoC: tas2552: Fix kernel crash caused by wrong kcontrol entry
ASoC: tas2552: Correct PDM configuration register bit definitions
ASoC: tas2552: Correct CFG1 register bit definitions
ASoC: tas2552: Simplify the tas2552_mute function
ASoC: tas2552: Simplify and reverse the functionality of
tas2552_sw_shutdown
ASoC: tas2552: Rename mclk parameter to pll_clkin to match with the
datasheet
DT/sound: bindings header file for tas2552 codec
ASoC: tas2552: Add support for pll and pdm source clock selection
ASoC: tas2552: Correct dai format support
ASoC: tas2552: Correct and clean up data format and BCLK/WCLK
direction
ASoC: tas2552: Add TDM support
ASoC: tas2552: Clean up the Digital - Analog DAPM route definition
ASoC: tas2552: Correct the Speaker Driver Playback Volume (PGA_GAIN)
ASoC: tas2552: Implement startup/stop sequence as per TRM
ASoC: tas2552: Add support for word length configuration
ASoC: tas2552: Configure the WCLK frequency based on the stream
ASoC: tas2552: Correct the PLL configuration
ASoC: tas2552: Add control for selecting DIN source
ASoC: tas2552: Correct Output Data register usage
ASoC: tas2552: Correct Boost Auto-Pass Through Control register usage
ASoC: tas2552: Code, define alignment changes for uniformity
include/dt-bindings/sound/tas2552.h | 18 ++
sound/soc/codecs/tas2552.c | 435 +++++++++++++++++++++++++++---------
sound/soc/codecs/tas2552.h | 149 ++++++------
3 files changed, 431 insertions(+), 171 deletions(-)
create mode 100644 include/dt-bindings/sound/tas2552.h
--
2.4.2
next reply other threads:[~2015-06-04 13:04 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-04 13:04 Peter Ujfalusi [this message]
2015-06-04 13:04 ` [PATCH v2 01/23] ASoC: tas2552: Make the enable-gpio really optional Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 02/23] ASoC: tas2552: Fix kernel crash when the codec is loaded but not part of a card Peter Ujfalusi
2015-06-04 16:25 ` Mark Brown
2015-06-05 6:57 ` Peter Ujfalusi
2015-06-04 16:50 ` Mark Brown
2015-06-04 13:04 ` [PATCH v2 03/23] ASoC: tas2552: Fix kernel crash caused by wrong kcontrol entry Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 04/23] ASoC: tas2552: Correct PDM configuration register bit definitions Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 05/23] ASoC: tas2552: Correct CFG1 " Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 06/23] ASoC: tas2552: Simplify the tas2552_mute function Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 07/23] ASoC: tas2552: Simplify and reverse the functionality of tas2552_sw_shutdown Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 08/23] ASoC: tas2552: Rename mclk parameter to pll_clkin to match with the datasheet Peter Ujfalusi
2015-06-04 16:51 ` Mark Brown
2015-06-04 13:04 ` [PATCH v2 09/23] DT/sound: bindings header file for tas2552 codec Peter Ujfalusi
2015-06-05 17:54 ` Mark Brown
2015-06-04 13:04 ` [PATCH v2 10/23] ASoC: tas2552: Add support for pll and pdm source clock selection Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 11/23] ASoC: tas2552: Correct dai format support Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 12/23] ASoC: tas2552: Correct and clean up data format and BCLK/WCLK direction Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 13/23] ASoC: tas2552: Add TDM support Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 14/23] ASoC: tas2552: Clean up the Digital - Analog DAPM route definition Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 15/23] ASoC: tas2552: Correct the Speaker Driver Playback Volume (PGA_GAIN) Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 16/23] ASoC: tas2552: Implement startup/stop sequence as per TRM Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 17/23] ASoC: tas2552: Add support for word length configuration Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 18/23] ASoC: tas2552: Configure the WCLK frequency based on the stream Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 19/23] ASoC: tas2552: Correct the PLL configuration Peter Ujfalusi
2015-06-05 6:53 ` Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 20/23] ASoC: tas2552: Add control for selecting DIN source Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 21/23] ASoC: tas2552: Correct Output Data register usage Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 22/23] ASoC: tas2552: Correct Boost Auto-Pass Through Control " Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 23/23] ASoC: tas2552: Code, define alignment changes for uniformity Peter Ujfalusi
2015-06-05 17:53 ` [PATCH v2 00/23] ASoC: tas2552: Fixes, cleanups and improvements Mark Brown
2015-06-08 7:52 ` Peter Ujfalusi
2015-06-08 9:24 ` Mark Brown
2015-06-08 9:54 ` Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433423075-14142-1-git-send-email-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=dmurphy@ti.com \
--cc=lgirdwood@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox